Number of found documents: 83
Published from to

Metodika charakterizace tvaru laserových tyčí pomocí multi vlnové interferometrie
Matoušek, Ondřej; Kredba, Jan; Procháska, František
2020 - Czech
Vytvořená metodika popisuje metodu multi vlnové interferometrie s řízenou změnou fáze a způsob její aplikace pro charakterizaci laserových tyčí, která umožňuje měření tvaru čelních povrchů, klínu, deformace průchozí vlnoplochy a vnitřní nehomogenity v jediném měřícím cyklu. The developed methodology describes the method of the multi-wave interferometry with controlled phase changing and the way of its application for the characterization of laser rod, which allows measurement of the shape of the front surfaces, wedge, deformation of the passing wavefront and internal inhomogeneity in a single measuring cycle Keywords: Multi-wave interferometry Available at various institutes of the ASCR
Metodika charakterizace tvaru laserových tyčí pomocí multi vlnové interferometrie

Vytvořená metodika popisuje metodu multi vlnové interferometrie s řízenou změnou fáze a způsob její aplikace pro charakterizaci laserových tyčí, která umožňuje měření tvaru čelních povrchů, klínu, ...

Matoušek, Ondřej; Kredba, Jan; Procháska, František
Ústav fyziky plazmatu, 2020

Návrh změn po testování Prototypu I
Pintr, Pavel
2019 - Czech
Popis designu obdélníkového spotu laserové navařovací hlavice. Cílem bylo navrhnout TOP HAT obdélníkový spot vhodný pro laserové navařování. Optical design description of rectangular spot of laser head. Our target was TOP HAT intensity distribution of rectangular spot for laser surfacing. Keywords: laser welding; surfacing; infrared; rectantular spot; TOP HAT distribution Available at various institutes of the ASCR
Návrh změn po testování Prototypu I

Popis designu obdélníkového spotu laserové navařovací hlavice. Cílem bylo navrhnout TOP HAT obdélníkový spot vhodný pro laserové navařování....

Pintr, Pavel
Ústav fyziky plazmatu, 2019

Technické řešení modernizace 2 m dalekohledu
Pintr, Pavel
2019 - Czech
Popis technického řešení modernizace 2 m dalekohledu v Ondřejově. Description of technical solution for renovation of 2 m telescope in Ondřejov. Keywords: 2 m telescope; Ondřejov; astronomy; modernization Available on request at various institutes of the ASCR
Technické řešení modernizace 2 m dalekohledu

Popis technického řešení modernizace 2 m dalekohledu v Ondřejově.


Description of technical solution for renovation of 2 m telescope in Ondřejov.

Pintr, Pavel
Ústav fyziky plazmatu, 2019

Stabilita optického monitoru při depozici 42-vrstvého interferenčního „bandpass“ filtru 520-590 nm
Žídek, Karel
2018 - Czech
V této zprávě popisujeme stabilitu depozice komplikovaných soustav tenkých vrstev, které byly navrženy jako interferenční filtr s pásmovou propustností. Jde o 42 vrstev TiO2 a SiO2, které jsou monitorovány jednak tzv. krystalovým a optickým monitorem tloušťky. Diskutujeme případ, kdy je návrh IF průběžně upravován podle reálné tloušťky deponovaných vrstev. We report on stability of a deposition process of a complex system of thin layers. The layers were designed as a 42-layer bandpass interference filter. The layers of TiO2 and SiO2 were monitored both by the means of a crystal and an optical thickness monitor. We discuss the case when the design of the interference filter is continuously adapted according to the real thickness of the already deposited layers. Keywords: thin layer deposition; thickness monitor; interference filter; deposition stability Available at various institutes of the ASCR
Stabilita optického monitoru při depozici 42-vrstvého interferenčního „bandpass“ filtru 520-590 nm

V této zprávě popisujeme stabilitu depozice komplikovaných soustav tenkých vrstev, které byly navrženy jako interferenční filtr s pásmovou propustností. Jde o 42 vrstev TiO2 a SiO2, které jsou ...

Žídek, Karel
Ústav fyziky plazmatu, 2018

Technical manual - collimator
Kredba, Jan; Steiger, Lukáš; Tomka, David; Václavík, Jan
2018 - English
The purpose of this document is to provide basic set of rules and instructions that allows using and maintaining of the NEOSTED collimator (COL).\nBe aware that it is not purpose of this document to provide detailed description of individual parts of the COL system. If necessary all the details and proper references can be found in [AD-2]. Keywords: collimator; NEOSTED; TOPTEC; optical testing; interferometry Available at various institutes of the ASCR
Technical manual - collimator

The purpose of this document is to provide basic set of rules and instructions that allows using and maintaining of the NEOSTED collimator (COL).\nBe aware that it is not purpose of this document to ...

Kredba, Jan; Steiger, Lukáš; Tomka, David; Václavík, Jan
Ústav fyziky plazmatu, 2018

Výzkumná zpráva Projekt MidFree 2. etapa
Beneš, Jiří; Karabyn, Vasyl; Matoušek, Ondřej; Špína, Michal
2018 - Czech
Výzkumná zpráva popisující tvorbu inženýrského modelu k predikci možností potlačení problematických povrchových struktur. Research report describing the creation of an engineering model to predict possibilities of suppressing problematic surface structures. Keywords: vibration analysis; MSF simulation Available at various institutes of the ASCR
Výzkumná zpráva Projekt MidFree 2. etapa

Výzkumná zpráva popisující tvorbu inženýrského modelu k predikci možností potlačení problematických povrchových struktur....

Beneš, Jiří; Karabyn, Vasyl; Matoušek, Ondřej; Špína, Michal
Ústav fyziky plazmatu, 2018

Realizace tenkých vrstev na optických komponentech
Budasz, Jiří
2018 - Czech
Zpráva se zabývá realizací tenkých vrstev na optických elementech určených pro funkční vzorky a prototypy. Popisuje rovněž zátěžové testování soustav vrstev na vzorcích. The report describes the realisation of the thin films coatings at the optical elements used for prototyping. It involves the testing of the coatings at sample substrates as well. Keywords: High reflective coatings; testing; laser Available at various institutes of the ASCR
Realizace tenkých vrstev na optických komponentech

Zpráva se zabývá realizací tenkých vrstev na optických elementech určených pro funkční vzorky a prototypy. Popisuje rovněž zátěžové testování soustav vrstev na vzorcích....

Budasz, Jiří
Ústav fyziky plazmatu, 2018

Collimator - test readiness review
Budasz, Jiří; Kaván, František; Kredba, Jan; Lédl, Vít; Mach, Marek; Pleštil, Jan; Psota, Pavel; Steiger, Lukáš; Tomka, David; Václavík, Jan; Veselý, Martin
2018 - English
This document describes the test procedure applicable to the overall functional test of the NEOSTED collimator.\nThe test to be performed according to this procedure are to demonstrate the compliance of the above item to the requirements specified in the applicable document as part of the overall verification program. The test results shall be collected in a Test Report. Keywords: collimator; PLC system; telescope; interferometry Available at various institutes of the ASCR
Collimator - test readiness review

This document describes the test procedure applicable to the overall functional test of the NEOSTED collimator.\nThe test to be performed according to this procedure are to demonstrate the compliance ...

Budasz, Jiří; Kaván, František; Kredba, Jan; Lédl, Vít; Mach, Marek; Pleštil, Jan; Psota, Pavel; Steiger, Lukáš; Tomka, David; Václavík, Jan; Veselý, Martin
Ústav fyziky plazmatu, 2018

Technical manual - neosted SOT test bench
Steiger, Lukáš
2018 - English
The purpose of this document is to provide basic set of rules and instructions that allows using and maintaining of the NEOSTED SOT test bench (BB).\nFurther detailed informations and proper references about individual parts of the BB system can be found in [AD-2, AD-3]. Keywords: test bench; optical testing; collimator; neosted Available at various institutes of the ASCR
Technical manual - neosted SOT test bench

The purpose of this document is to provide basic set of rules and instructions that allows using and maintaining of the NEOSTED SOT test bench (BB).\nFurther detailed informations and proper ...

Steiger, Lukáš
Ústav fyziky plazmatu, 2018

Vývoj procesu mytí a příprava povrchu před depozicí
Budasz, Jiří
2018 - Czech
Zpráva popisuje vývoj mycího postupu substrátů pro výrobu superodrazných zrcadel. Zahrnuje také vývoj procesu ošetření povrchu ve vakuu. The report deals with a development of cleaning precedure of substrates used for producing high reflective mirrors. It involves pre-deposition treatment of the surface in vacuum chamber. Keywords: High reflective coatings; cleaning; pre-deposition treatment Available at various institutes of the ASCR
Vývoj procesu mytí a příprava povrchu před depozicí

Zpráva popisuje vývoj mycího postupu substrátů pro výrobu superodrazných zrcadel. Zahrnuje také vývoj procesu ošetření povrchu ve vakuu....

Budasz, Jiří
Ústav fyziky plazmatu, 2018

About project

NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web

Send your suggestions and comments to nusl@techlib.cz

Provider

http://www.techlib.cz

Facebook

Other bases