Počet nalezených dokumentů: 16369
Publikováno od do

Room temperature ethanol detection using carbon materials
Kočí, Michal
2023 - anglický
Allotropic forms of carbon, in particular graphene oxide (GO) or nanocrystalline diamond (NCD), attracted the attention of many research groups due to their unique electronic structures and extraordinary physical and chemical properties, preferable for many different applications, including sensor devices. This work focuses on responses of various sensing layers (NCD with hydrogen termination (H-NCD), graphene oxide (GO), reduced graphene oxide (rGO), thiol-functionalized graphene oxide (GO-SH) and their hybrid structures to ethanol vapor with concentrations up to 100 ppm in synthetic air at room temperature. The measured parameters of the tested sensors, especially stability, reproducibility and regeneration, are compared and critically evaluated. The high sensitivity of tested sensors achieved at room temperature makes them very promising for monitoring ethanol vapor as well as other volatile substances (e.g., isopropyl-alcohol or acetone). Klíčová slova: gas sensor; nanocrystalline diamond (NCD); graphene oxide (GO); reduced graphene oxide (rGO); thiol-functionalized graphene oxide (GO-SH) Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Room temperature ethanol detection using carbon materials

Allotropic forms of carbon, in particular graphene oxide (GO) or nanocrystalline diamond (NCD), attracted the attention of many research groups due to their unique electronic structures and ...

Kočí, Michal
Fyzikální ústav, 2023

Dynamická zkouška dvojice zavěšených lávek pro pěší a cyklisty v oblasti Dolních Vítkovic
Hračov, Stanislav; Urushadze, Shota; Macháček, Michael
2023 - český
Zpráva popisuje postup provedení a výsledky dynamické zatěžovací zkoušky dvojice lávek pro pěší v Ostravě. Zjištěné modální vlastnosti skutečných konstrukcí jsou porovnány s výsledky teoretické modální analýzy jejich numerických modelů. Úroveň vibrací mostovek obou lávek od přechodů chodců a běžců je poté posouzena s ohledem na jejich pohodlí a zdraví. The report describes the procedure and results of the dynamic loading test carried out at a pair of footbridges in Ostrava. The determined modal properties of the real structures are compared with the results of the theoretical modal analysis of their numerical models. The levels of the vibrations of the decks originated from pedestrians and runners are assessed with respect to their comfort and health. Klíčová slova: footbridge; dynamic loading test; pedestrian load; vibration comfort criteria; tuned mass dampers Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Dynamická zkouška dvojice zavěšených lávek pro pěší a cyklisty v oblasti Dolních Vítkovic

Zpráva popisuje postup provedení a výsledky dynamické zatěžovací zkoušky dvojice lávek pro pěší v Ostravě. Zjištěné modální vlastnosti skutečných konstrukcí jsou porovnány s výsledky teoretické ...

Hračov, Stanislav; Urushadze, Shota; Macháček, Michael
Ústav teoretické a aplikované mechaniky, 2023

Výzkum zříceniny hradu Štamberk v kontextu regionu
Novotný, Jakub; Ramešová, Michaela
2023 - český
Příspěvek přibližuje dosavadní výsledky výzkumu hradu Štamberk realizovaného dle nově definovaných zásad pro výzkum, správu a prezentaci historických zřícenin, jehož cílem je podpořit nová řešení jak zvýšit využitelnost hradu pro cestovní ruch a integrovat památku do regionálních struktur lokalit s potenciálem cestovního ruchu. Hrad byl významným panstvím v rámci území dnešní Vysočiny. Předmětem řešení projektu, na kterém od roku 2020 spolupracuje ÚTAM AV ČR s Mikroregionem Telčsko, je výzkum historie hradu se zaměřením na technologická hlediska jeho výstavby, stavebních změn i zániku. Součástí je vytvoření 3D modelu zříceniny v krajinném kontextu. Projekt se soustředí na dějiny výroby vápna a související inventarizaci geologických lokalit. Tento výzkum přináší nové informace důležité nejen pro poznání historie hradu či pro studium analogických situací, ale také pro zvýšení atraktivity památky pro cestovní ruch. Příspěvek nejprve představí aktuální standardy výzkumu a managementu zřícenin, následně se bude zabývat nástinem potenciálu výzkumu Štamberka pro oblast cestovního ruchu s důrazem na historii hradu, mapování krajinného rámce a identifikace vazeb na regionální prostředí. Na závěr zrekapituluje dosavadní výsledky využitelné k prezentaci historického, kulturního i přírodního bohatství regionu se specifickou vazbou na cestovní ruch. The paper provides an overview of the research results of the Štamberk castle carried out according to newly defined principles for the research, management and presentation of historical ruins, the aim of which is to support new solutions to increase the usability of the castle for tourism and to integrate the monument into the regional structures of localities with tourism potential. The castle was an important place within the territory of today's Highlands. The subject of the project, on which ITAM CAS has been collaborating with the Telčsko Microregion since 2020, is research into the history of the castle with a focus on the technological aspects of its construction, structural changes and demise. It includes the creation of a 3D model of the ruins in a landscape context. The project focuses on the history of lime production and the related inventory of geological sites. This research brings new information important not only for learning about the history of the castle or for studying analogous situations, but also for increasing the attractiveness of the monument for tourism. The paper first presents the current standards of research and management of ruins, then it deals with an outline of the research potential of Štamberk for the field of tourism with an emphasis on the history of the castle, mapping the landscape framework and identifying links to the regional environment. At the end, it summarizes the results so far that can be used to present the historical, cultural and natural wealth of the region with a specific link to tourism. Klíčová slova: Štamberk; ruin; technological research; presentation of monuments; tourism Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Výzkum zříceniny hradu Štamberk v kontextu regionu

Příspěvek přibližuje dosavadní výsledky výzkumu hradu Štamberk realizovaného dle nově definovaných zásad pro výzkum, správu a prezentaci historických zřícenin, jehož cílem je podpořit nová řešení jak ...

Novotný, Jakub; Ramešová, Michaela
Ústav teoretické a aplikované mechaniky, 2023

Some modifications of the limited-memory variable metric optimization methods
Vlček, Jan; Lukšan, Ladislav
2023 - anglický
Several modifications of the limited-memory variable metric (or quasi-Newton) line search methods for large scale unconstrained optimization are investigated. First the block version of the symmetric rank-one (SR1) update formula is derived in a similar way as for the block BFGS update in Vlˇcek and Lukˇsan (Numerical Algorithms 2019). The block SR1 formula is then modified to obtain an update which can reduce the required number of arithmetic operations per iteration. Since it usually violates the corresponding secant conditions, this update is combined with the shifting investigated in Vlˇcek and Lukˇsan (J. Comput. Appl. Math. 2006). Moreover, a new efficient way how to realize the limited-memory shifted BFGS method is proposed. For a class of methods based on the generalized shifted economy BFGS update, global convergence is established. A numerical comparison with the standard L-BFGS and BNS methods is given. Klíčová slova: unconstrained minimization; variable metric methods; limited-memory methods; variationally derived methods; arithmetic operations reduction; global convergence Plné texty jsou dostupné v digitálním repozitáři NUŠL
Some modifications of the limited-memory variable metric optimization methods

Several modifications of the limited-memory variable metric (or quasi-Newton) line search methods for large scale unconstrained optimization are investigated. First the block version of the symmetric ...

Vlček, Jan; Lukšan, Ladislav
Ústav informatiky, 2023

SMV-2023-30: ILA compact
Hrabina, Jan; Holá, Miroslava; Oulehla, Jindřich; Pokorný, Pavel; Lazar, Josef; Šarlejová, Tatiana; Šlechtický, Stanislav
2023 - český
Smluvní výzkum byl zaměřen na vývoj reference optického kmitočtů pro frekvenční stabilizaci kompaktních laserových zdrojů. Tato optická reference je založena na bázi absorpční kyvety plněných čistými plyny a dovoluje stabilizaci laserových zdrojů pomocí metod laserové spektroskopie. Kyveta je určena k použití jako reference optických kmitočtů laserové normály pracující v pásmu vlnových délek 532-633 nm. The contractual research was oriented towards the development of optical frequency reference intended for the frequency stabilisation of ultra-compact semiconductor laser sources. This optical reference is based on an absorption cell filled with ultra-pure absorption gases, and it allows precise locking of the lasers with laser spectroscopy methods. The cell will serve as a reference of optical frequencies in systems of laser standards (532-633 nm wavelengths). Klíčová slova: absorption cell; iodine cell; laser spectroscopy; stabilised laser; frequency stability Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
SMV-2023-30: ILA compact

Smluvní výzkum byl zaměřen na vývoj reference optického kmitočtů pro frekvenční stabilizaci kompaktních laserových zdrojů. Tato optická reference je založena na bázi absorpční kyvety plněných čistými ...

Hrabina, Jan; Holá, Miroslava; Oulehla, Jindřich; Pokorný, Pavel; Lazar, Josef; Šarlejová, Tatiana; Šlechtický, Stanislav
Ústav přístrojové techniky, 2023

SMV-2023-34: ULM2023
Hrabina, Jan; Holá, Miroslava; Oulehla, Jindřich; Pokorný, Pavel; Lazar, Josef; Šarlejová, Tatiana; Šlechtický, Stanislav
2023 - český
Smluvní výzkum byl zaměřen na vývoj reference optického kmitočtů pro frekvenční stabilizaci kompaktních laserových zdrojů. Tato optická reference je založena na bázi absorpční kyvety plněných čistými plyny a dovoluje stabilizaci laserových zdrojů pomocí metod laserové spektroskopie. Kyveta je určena k použití jako reference optických kmitočtů laserové normály pracující v pásmu vlnových délek 532-633 nm. The contractual research was oriented towards the development of optical frequency reference intended for the frequency stabilisation of ultra-compact semiconductor laser sources. This optical reference is based on an absorption cell filled with ultra-pure absorption gases, and it allows precise locking of the lasers with laser spectroscopy methods. The cell will serve as a reference of optical frequencies in systems of laser standards (532-633 nm wavelengths). Klíčová slova: absorption cell; iodine cell; laser spectroscopy; stabilised laser; frequency stability Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
SMV-2023-34: ULM2023

Smluvní výzkum byl zaměřen na vývoj reference optického kmitočtů pro frekvenční stabilizaci kompaktních laserových zdrojů. Tato optická reference je založena na bázi absorpční kyvety plněných čistými ...

Hrabina, Jan; Holá, Miroslava; Oulehla, Jindřich; Pokorný, Pavel; Lazar, Josef; Šarlejová, Tatiana; Šlechtický, Stanislav
Ústav přístrojové techniky, 2023

SMV-2023-35: NIM Víceprůchod
Hrabina, Jan; Holá, Miroslava; Oulehla, Jindřich; Pokorný, Pavel; Lazar, Josef; Šarlejová, Tatiana; Šlechtický, Stanislav
2023 - český
Smluvní výzkum byl zaměřen na vývoj referencí optických kmitočtů pro frekvenční stabilizaci kompaktních laserových zdrojů. Tyto optické reference jsou založeny na bázi absorpčních kyvet plněných čistými plyny a dovolují stabilizaci laserových zdrojů pomocí metod laserové spektroskopie. Kyvety jsou určené k použití jako reference optických kmitočtů pro laserové normály pracující v pásmu vlnových délek 532 nm. The contractual research was oriented towards the development of optical frequency references intended for the frequency stabilisation of ultra-compact laser sources. These optical references are based on absorption cells filled with ultra-pure absorption gases and they allow precise locking of the lasers with the methods of laser spectroscopy. The cells will serve as the references of optical frequencies in systems of laser standards (532 nm wavelengths). Klíčová slova: absorption cell; iodine cell; laser spectroscopy; stabilised laser; frequency stability Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
SMV-2023-35: NIM Víceprůchod

Smluvní výzkum byl zaměřen na vývoj referencí optických kmitočtů pro frekvenční stabilizaci kompaktních laserových zdrojů. Tyto optické reference jsou založeny na bázi absorpčních kyvet plněných ...

Hrabina, Jan; Holá, Miroslava; Oulehla, Jindřich; Pokorný, Pavel; Lazar, Josef; Šarlejová, Tatiana; Šlechtický, Stanislav
Ústav přístrojové techniky, 2023

SMV-2023-36: Wuhan Space
Hrabina, Jan; Holá, Miroslava; Oulehla, Jindřich; Pokorný, Pavel; Lazar, Josef; Šarlejová, Tatiana; Šlechtický, Stanislav
2023 - český
Smluvní výzkum byl zaměřen na vývoj reference optického kmitočtů pro frekvenční stabilizaci kompaktních laserových zdrojů. Tato optická reference je založena na bázi absorpční kyvety plněných čistými plyny a dovoluje stabilizaci laserových zdrojů pomocí metod laserové spektroskopie. Kyveta je určena k použití jako reference optických kmitočtů laserové normály pracující v pásmu vlnových délek 532-633 nm. The contractual research was oriented towards the development of optical frequency reference intended for the frequency stabilisation of ultra-compact semiconductor laser sources. This optical reference is based on an absorption cell filled with ultra-pure absorption gases, and it allows precise locking of the lasers with laser spectroscopy methods. The cell will serve as a reference of optical frequencies in systems of laser standards (532-633 nm wavelengths). Klíčová slova: absorption cell; iodine cell; laser spectroscopy; stabilised laser; frequency stability Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
SMV-2023-36: Wuhan Space

Smluvní výzkum byl zaměřen na vývoj reference optického kmitočtů pro frekvenční stabilizaci kompaktních laserových zdrojů. Tato optická reference je založena na bázi absorpční kyvety plněných čistými ...

Hrabina, Jan; Holá, Miroslava; Oulehla, Jindřich; Pokorný, Pavel; Lazar, Josef; Šarlejová, Tatiana; Šlechtický, Stanislav
Ústav přístrojové techniky, 2023

SMV‐2023‐01: Reliéfní struktury na principu diftraktivní optiky
Horáček, Miroslav; Kolařík, Vladimír; Matějka, Milan; Krátký, Stanislav; Chlumská, Jana; Meluzín, Petr; Král, Stanislav
2023 - český
Výzkum a vývoj v oblasti fyzikální realizace grafických a optických struktur na principu difraktivní optiky prostředky elektronové litografie v záznamovém materiálu neseném křemíkovou nebo skleněnou deskou. Výzkum zahrnuje analýzu grafického resp. optického motivu, výzkum a aplikaci reliéfních struktur realizujících požadované grafické resp. optické vlastnosti, výzkum a modelování možností fyzikální realizace reliéfních struktur, vypracování a analýzu technologie realizace reliéfní struktury s ohledem na limity současných vědeckých přístrojů, ověření teoretických úvah expozicí vzorku reliéfní struktury. Research and development in the field of physical realization of graphic and optical structures based on the principle of diffractive optics by means of electron beam lithography in a recording material supported by a silicon or glass board. The research covers the analysis of the graphical or optical motive, research and application of relief structures implementing the required graphic and optical properties, research and modeling of the physical possibilities of implementation of relief structures, preparation and analysis of technology of implementation of relief structures with regard to the limits of current scientific instruments, verification of theoretical considerations by means of relief structure sample exposure. Klíčová slova: diffractive optical structures; relief structure; e-beam lithography Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
SMV‐2023‐01: Reliéfní struktury na principu diftraktivní optiky

Výzkum a vývoj v oblasti fyzikální realizace grafických a optických struktur na principu difraktivní optiky prostředky elektronové litografie v záznamovém materiálu neseném křemíkovou nebo skleněnou ...

Horáček, Miroslav; Kolařík, Vladimír; Matějka, Milan; Krátký, Stanislav; Chlumská, Jana; Meluzín, Petr; Král, Stanislav
Ústav přístrojové techniky, 2023

SMV-2023-37: Projekt CRYSA - kryostat sondy 2
Frolec, Jiří
2023 - český
Cílem celého projektu CRYSA je výběr a testování tří kompozitních materiálů vhodných pro uchycení zařízení na velmi nízké teplotě (kryostatu), jež bude součástí chystané vesmírné sondy Athena od Evropské kosmické agentury (ESA). Na projektu spolupracuje skupina Kryogeniky a supravodivosti z Ústavu přístrojové techniky (ÚPT), firmy OHB Czechspace, 5M s.r.o. a Ústav fyziky materiálů AV ČR. Uvedené smluvní výzkumy se v r. 2023 v ÚPT zaměřily na dílčí cíle projektu. Konkrétně byl finalizován výběr tří nejlepších materiálů, které budou v budoucnu testovány, byly vypracovány detailní postupy pro plánované měření tepelných vodivostí vzorků a metoda jejich teplotního cyklování za nízkých teplot. Pracovníky skupiny Kryogenika a supravodivost byla také provedena optimalizace měřící aparatury a změřeny tepelné vodivosti několika cvičných vzorků. Výstupy tohoto projektu pomohou ESA s výběrem optimálního materiálu pro konstrukci závěsů uvedeného kryostatu pro dalekohled Athena. The goal of the project CRYSA is the selection and testing of three composite materials suitable for fixation of a low temperature device (cryostat), which will be part of the upcoming Athena space probe from the European Space Agency (ESA). The Cryogenics and Superconductivity group at the Institute of Scientific Instruments of the Czech Academy of Sciences (ISI Brno), OHB Czechspace, 5M s.r.o. and the Institute of Physics of Materials of the CAS (IPM) collaborate on this project. The aforementioned contractual researches carried out at ISI Brno in 2023 were focused on the partial goals of the project. Specifically, the selection of the three best materials, which will be tested in the future, was finalized. Further, detailed procedures for the planned measurements of the thermal conductivity of the samples and the method of their temperature cycling at low temperatures were developed. The members of the Cryogenics and Superconductivity Group also performed optimization of the measuring devices and measured thermal conductivities of several dummy samples. The outputs of this project will help ESA with the selection of the optimal material for the construction of the mechanical supports for the cryostat in the Athena telescope. Klíčová slova: thermal conductivity; cryogenics; space probe; Athena Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
SMV-2023-37: Projekt CRYSA - kryostat sondy 2

Cílem celého projektu CRYSA je výběr a testování tří kompozitních materiálů vhodných pro uchycení zařízení na velmi nízké teplotě (kryostatu), jež bude součástí chystané vesmírné sondy Athena od ...

Frolec, Jiří
Ústav přístrojové techniky, 2023

O službě

NUŠL poskytuje centrální přístup k informacím o šedé literatuře vznikající v ČR v oblastech vědy, výzkumu a vzdělávání. Více informací o šedé literatuře a NUŠL najdete na webu služby.

Vaše náměty a připomínky posílejte na email nusl@techlib.cz

Provozovatel

http://www.techlib.cz

Facebook

Zahraniční báze