Number of found documents: 502
Published from to

Vliv podmínek flokulace (intenzita míchání a doba zdržení) na tvar a strukturu tvořených agregátů a účinnost jejich separace sedimentací a filtrací
Pivokonský, Martin; Vašatová, Petra; Pivokonská, Lenka; Petříček, Radim; Filipenská, Monika
2018 - Czech
Souhrnná výzkumná zpráva o vlivu hydrodynamických podmínek flokulace (intenzita míchání, doba zdržení, atd.) na vlastnosti agregátů (velikost, tvar, struktura atd.), které mají zásadní dopad na separační kroky (sedimentace, filtrace) při úpravě vody. Zpráva bude sloužit jako podklad pro řízení provozu úpravny vody s technologií vysokoúčinné flokulace. A summary research report on the influence of hydrodynamic conditions of flocculation (the intensity of mixing, residence time, etc.) on the property of the aggregates (size, shape, structure, etc.), that have a major impact on the separation steps (sedimentation, filtration) during water treatment. The report will be used by the water treatment plants with the technology of high intensity flocculation. Keywords: water treatment; coagulation; flocculation; aggregation; mixing; velocity gradient; filtration; sedimentation Available at various institutes of the ASCR
Vliv podmínek flokulace (intenzita míchání a doba zdržení) na tvar a strukturu tvořených agregátů a účinnost jejich separace sedimentací a filtrací

Souhrnná výzkumná zpráva o vlivu hydrodynamických podmínek flokulace (intenzita míchání, doba zdržení, atd.) na vlastnosti agregátů (velikost, tvar, struktura atd.), které mají zásadní dopad na ...

Pivokonský, Martin; Vašatová, Petra; Pivokonská, Lenka; Petříček, Radim; Filipenská, Monika
Ústav pro hydrodynamiku, 2018

Experimental investigation of settling slurry flow in inclined pipe sections
Vlasák, Pavel; Chára, Zdeněk; Matoušek, Václav; Kesely, Mikoláš; Konfršt, Jiří
2018 - English
Narrow particle size distribution glass beads-water slurry flow in the pipe sections of different inclination were investigated on an experimental pipe loop of inner diameter D = 100 mm. The study refers to the effect of pipe inclination and slurry velicity on local concentration distribution, pressure drop-velocity relationship, and deposition limit. The study revealed that the glass beads-water mixtures in the inclined pipe sections were significantly stratified: the solid particles moved principally close to the pipe invert, and for flow velocities close to the deposition limit sliding bed or stationary deposit is created even in inclined pipe sections. Keywords: settling slurry; inclined pipe; pressure drops; concentration distribution; radiometry Available at various institutes of the ASCR
Experimental investigation of settling slurry flow in inclined pipe sections

Narrow particle size distribution glass beads-water slurry flow in the pipe sections of different inclination were investigated on an experimental pipe loop of inner diameter D = 100 mm. The study ...

Vlasák, Pavel; Chára, Zdeněk; Matoušek, Václav; Kesely, Mikoláš; Konfršt, Jiří
Ústav pro hydrodynamiku, 2018

Voda pro život – strategie AV 21
Pivokonský, Martin; Čermáková, Lenka; Novotná, Kateřina; Pivokonská, Lenka
2018 - Czech
Zásluhou Ústavu pro hydrodynamiku AV ČR, v. v. i., bylo na počátku roku 2018 do výzkumného programu Strategie AV 21 Přírodní hrozby nově zařazeno téma Voda pro život. Zaměřuje se na komplexní a systematický výzkum a spolupráci mezi odborníky a zainteresovanými subjekty v oblasti ochrany a využití vodních zdrojů a na problematiku zásobování vodou a zachování čistoty vod. Nedílnou součástí projektu je komunikace s nejširší veřejností, přinášející všeobecnou informovanost ohledně významu a stavu vod, využití nejnovějších technologií v dané oblasti a přístupů umožňujících co možná nejšetrnější nakládání s vodními zdroji. Konference Pitná voda v Táboře je největší a nejvýznamnější konferencí týkající se pitné vody v České republice. Vždy jednou za dva roky se zde setkávající odborníci, technologové a provozovatelé vodáren a diskutují o nových poznatcích a problémech týkajících se dané oblasti. Právě na tomto místě je vhodné představit nově vzniklý projekt „Voda pro život“, a dostat ho tak do povědomí širší odborné veřejnosti působící v oblasti pitné vody a hospodaření s vodou. Theme of Water for Life was newly added to the research program Natural Hazards of Strategy AV 21 in 2018 thanks to the Institute of Hydrodynamics of the Czech Academy of Science. It focuses on comprehensive and systematic research and cooperation between experts and stakeholders in the field of water resource protection, water supply and water quality. Important part of the project is communication with the public. The Drinking Water Conference in Tábor is the largest and the most important conference on drinking water in the Czech Republic. Experts, technologists and water managers are meeting every two years and discussing new knowledge and issues related to the water treatment. Keywords: strategy AV 21; Water for life; water treatment; water sources; research Available at various institutes of the ASCR
Voda pro život – strategie AV 21

Zásluhou Ústavu pro hydrodynamiku AV ČR, v. v. i., bylo na počátku roku 2018 do výzkumného programu Strategie AV 21 Přírodní hrozby nově zařazeno téma Voda pro život. Zaměřuje se na komplexní a ...

Pivokonský, Martin; Čermáková, Lenka; Novotná, Kateřina; Pivokonská, Lenka
Ústav pro hydrodynamiku, 2018

Formování kapek v systému dvou nemísitelných kapalin
Kysela, Bohuš; Konfršt, Jiří; Chára, Zdeněk; Šulc, R.; Jašíková, D.
2017 - Czech
Velikost kapek při míchání dvou vzájemně nemísitelných kapalin závisí především na působení vnějších sil. Smyková napětí působící na částici v závislosti na fyzikálních parametrech (povrchové napětí, hustota, viskozita) ovlivňují konečnou distribuci velikostí tvořených kapek. V první fázi jsme se pokusili modelovat dvě reálné nemísitelné kapaliny voda-silikonový olej, které jsou dány svými vlastnostmi. A to na jednoduchém případě výtoku z kapiláry, kde jsme se snažili ověřit, zda a jak moc přesně lze modelovat chování tohoto systému s různými odchylkami fyzikálních parametrů. Dále jsme se snažili určit rovnovážné a mezní stavy v závislosti na zadaných fyzikálních vlastnostech. The CFD simulation of simple two phase system using VOF model was verified by the real measurements. The system of two immiscible liquids silicone oil and water was tested on simple task with droplet formation from immersed jet. The setup of physical properties in CFD simulations was corrected by the experimental results. Keywords: VOF; liquid; multiphase Available at various institutes of the ASCR
Formování kapek v systému dvou nemísitelných kapalin

Velikost kapek při míchání dvou vzájemně nemísitelných kapalin závisí především na působení vnějších sil. Smyková napětí působící na částici v závislosti na fyzikálních parametrech (povrchové napětí, ...

Kysela, Bohuš; Konfršt, Jiří; Chára, Zdeněk; Šulc, R.; Jašíková, D.
Ústav pro hydrodynamiku, 2017

Dependence of morphology of electrospun PVB nanofibres containing fumed silica on elasticity of the processed solutions
Peer, Petra; Polášková, M.; Filip, Petr
2017 - English
Application of various types of fumed silica gives a possibility to tailor a degree of hydrophilicity or hydrophobicity of the resulting electrospun nanofibrous mats where as a basic polymeric material is taken poly(vinyl butyral) (PVB) solved in methanol. Presence of fumed silica substantially changes viscoelastic attributes in comparison with the neat PVB solution.\nThe aim of this contribution is to compare morphological structures of the resulting electrospun mats generated from the solutions with presence and absence of various types of fumed silica differing in surface morphology, size and the specific surface area. This comparison is based on the rheological characteristics with the emphasis to elasticity of the pre-processed solutions. The differences in elasticity among fumed silica based solutions are indeed remarkable. The obtained results show that elasticity does not play a crucial role in creation and morphological aspects of the corresponding nanofibrous mats including fibres diameter. Keywords: rheology; elasticity; PVB solution; fumed silica; electrospinning Available at various institutes of the ASCR
Dependence of morphology of electrospun PVB nanofibres containing fumed silica on elasticity of the processed solutions

Application of various types of fumed silica gives a possibility to tailor a degree of hydrophilicity or hydrophobicity of the resulting electrospun nanofibrous mats where as a basic polymeric ...

Peer, Petra; Polášková, M.; Filip, Petr
Ústav pro hydrodynamiku, 2017

31st Symposium on anemometry: proceedings
Chára, Zdeněk; Klaboch, L.
2017 - Czech
Sborník z konference 31st symposium o anemometrii. Konference byla zaměřena na experimentální techniky používané v mechanice tekutin.\n Proceedings of 31st Symposium on Anemometry. The conference was oriented on the experimental techniques applied in fluid mechanics. Keywords: anemometry; conference; proceedings Available at various institutes of the ASCR
31st Symposium on anemometry: proceedings

Sborník z konference 31st symposium o anemometrii. Konference byla zaměřena na experimentální techniky používané v mechanice tekutin.\n...

Chára, Zdeněk; Klaboch, L.
Ústav pro hydrodynamiku, 2017

Flow behaviour and structure of heterogeneous particles-water mixture in horizontal and inclined pipes
Vlasák, Pavel; Chára, Zdeněk; Konfršt, Jiří
2017 - English
Available at various institutes of the ASCR
Flow behaviour and structure of heterogeneous particles-water mixture in horizontal and inclined pipes

Vlasák, Pavel; Chára, Zdeněk; Konfršt, Jiří
Ústav pro hydrodynamiku, 2017

Řízený pohyb kulové částice v kanále s volnou hladinou
Chára, Zdeněk; Kysela, Bohuš; Konfršt, Jiří
2017 - Czech
V příspěvku jsou prezentovány experimentální výsledky proudění kolem kulovité částice, kdy částice je umístěna na tenké tyčce a její pohyb je řízen asynchronním motorkem. Pro určení rychlostních polí kolem pohybující se částice byla použita metoda 2D PIV. Měření se uskutečnila v kanále s volnou hladinou, jehož dno bylo pokryto jednou vrstvou skleněných tyček o průměru 6mm. The paper presents experimental results of the flow around the spherical particle, where the particles are placed on a thin rod and its movement is controlled by a step motor. To determine the velocity fields around the moving particle, the 2D PIV method was used. The measurement was carried out in the open channel, the bottom of which was covered with one layer of 6 mm diameter glass bars. Keywords: open channel; PIV; turbulence Available at various institutes of the ASCR
Řízený pohyb kulové částice v kanále s volnou hladinou

V příspěvku jsou prezentovány experimentální výsledky proudění kolem kulovité částice, kdy částice je umístěna na tenké tyčce a její pohyb je řízen asynchronním motorkem. Pro určení rychlostních polí ...

Chára, Zdeněk; Kysela, Bohuš; Konfršt, Jiří
Ústav pro hydrodynamiku, 2017

In-situ measurement of particle size distribution in an agitated vessel
Kysela, Bohuš; Konfršt, Jiří; Chára, Zdeněk; Šulc, R.; Ditl, P.
2017 - English
Agitation of solid-liquid suspension or two immiscible liquids is a frequent operation in chemical and metallurgical industries (suspension/emulsion polymerization, catalytic chemical reaction, hydrometallurgical solvent extraction). The product quality, yield and economy of the processes are significantly affected by a mixing process. Prediction of mean particle/drop size and particle/drop size distribution (PSD) during the agitation is fundamental for emulsification, suspension polymerization, solid particle dispersion or crystallization. \nThe aim of this contribution is to propose a simple method of in-situ measurement of particle size distribution. The particle size measurement is based on an image analysis performed on raw image records. Evaluation method based on the best focused particles with sharp detected boundaries enhanced by the analysis of particle circularity was developed. Precise spherical mono-disperse steel and plastic particles were used to verify accuracy of evaluation method. The method has been proposed for the measurement of the time evolution of the drop size distribution in liquid-liquid dispersion in an agitated tank. The effect of droplet size distribution on the impeller speed in wateroil dispersion in agitated vessel was obtained. Keywords: particles; droplets; PSD; image analysis; agitated vessel Available at various institutes of the ASCR
In-situ measurement of particle size distribution in an agitated vessel

Agitation of solid-liquid suspension or two immiscible liquids is a frequent operation in chemical and metallurgical industries (suspension/emulsion polymerization, catalytic chemical reaction, ...

Kysela, Bohuš; Konfršt, Jiří; Chára, Zdeněk; Šulc, R.; Ditl, P.
Ústav pro hydrodynamiku, 2017

Simulace pohybu částic v nakloněném potrubí pomocí kombinace CFD a DEM
Mildner, Michael; Konfršt, Jiří; Kysela, Bohuš; Chára, Zdeněk; Vlasák, Pavel
2017 - Czech
Numerická simulace proudění rozplavených hrubozrnných suspenzí (hydrotransport, odlučovače atp.) vyžaduje použití výpočtů pro vícefázové proudění. Za předpokladu toku suspenze (např. vody a pevných částic) v uzavřených profilech bez přístupu vzduchu můžeme úlohu zjednodušit na dvoufázové proudění (voda-pevné částice). Vhodným nástrojem pro výpočet takovéhoto dvoufázového proudění je kombinace metody konečných objemů FVM s metodou diskrétních elementů DEM. Metoda diskrétních elementů je použita na řešení kolizí mezi jednotlivými částicemi, což je nezbytnou podmínkou pro reálné řešení proudění více- koncentrovaných suspenzí. Numerická simulace byla provedena na jednoduché geometrii nakloněného potrubí, kde jsou získané výsledky porovnávány s výsledky získanými na experimentální trase pro transport suspenzí opatřené sklopnou částí. Numerical flow simulation of scattered coarse-grained suspensions (hydrotransport, separators, etc.) requires the use of calculations for multiphase flow. Assuming the suspension flow (eg. water and solid particles) in closed profiles without air access, the task can be simplified to a two-phase flow (water-solid particles). A suitable tool for calculating such two-phase flow is the combination of the finite volume method FVM, with the discrete element method DEM. The discrete element method is used to solve collisions between individual particles, which is a prerequisite for a real solution of more concentrated suspension flow. Numerical simulation was performed on a simple geometry of inclined pipeline, where the obtained results were compared with the results obtained on the experimental slurry transport route equipped with a foldable part. Keywords: CFD; FVM; DEM; transport of suspension Available on request at various institutes of the ASCR
Simulace pohybu částic v nakloněném potrubí pomocí kombinace CFD a DEM

Numerická simulace proudění rozplavených hrubozrnných suspenzí (hydrotransport, odlučovače atp.) vyžaduje použití výpočtů pro vícefázové proudění. Za předpokladu toku suspenze (např. vody a pevných ...

Mildner, Michael; Konfršt, Jiří; Kysela, Bohuš; Chára, Zdeněk; Vlasák, Pavel
Ústav pro hydrodynamiku, 2017

About project

NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web

Send your suggestions and comments to nusl@techlib.cz

Provider

http://www.techlib.cz

Facebook

Other bases