MEDICEM Institute, spol. s.r.o. - Technology to shape hydrogels by lasers
Rostohar, Danijela; Flimelová, Miroslava
2015 - English
We have prepared study with aim to propose a technology allowing to shape hydrogels by lasers and to describe a project (including timelines, milestones, team and budget) that would lead to the development of such technology, including supportive scientific, technical and theoretical information.
Keywords:
hydrogels; lasers; intraocular implants; intraocular lenses
Available at various institutes of the ASCR
MEDICEM Institute, spol. s.r.o. - Technology to shape hydrogels by lasers
We have prepared study with aim to propose a technology allowing to shape hydrogels by lasers and to describe a project (including timelines, milestones, team and budget) that would lead to the ...
Thermocouples
Kopeček, Jaromír
2015 - English
Analsis of different samples of thermocouples before and after laser marking what is used to produce barcode close to spike of the probes. The aim is to investigate the influence of laser marking by detailed analysis of the material structure of the samples.
Keywords:
laser marking; thermocouple; analysis; inconel
Available at various institutes of the ASCR
Thermocouples
Analsis of different samples of thermocouples before and after laser marking what is used to produce barcode close to spike of the probes. The aim is to investigate the influence of laser marking by ...
Škoda Auto a.s. – Výběr optimálního typu laseru pro laserové popisování plechů
Švábek, Roman; Bičišťová, Radka; Flimelová, Miroslava
2015 - Czech
Experimentální popis materiálů laserem s ohledem na technologické požadavky v zadání – použití vhodných typů laserů na základě rešerše (fáze I) a specifikování jejich klíčových technických parametrů (kontinuální vs pulsní režim, vlnová délka, délka pulsu tvar pulsu, výkon, frekvence atd.). Výstupem je doporučení vhodného typu laseru vhodného pro tuto technologii. Experimental processing of materials with laser beam according the technological requirements of the assignment - the use of appropriate types of lasers based on research ( Phase I) and specify their key technical parameters ( continuous vs pulsed mode, wavelength, pulse duration , pulse shape , power, frequency etc. ). The output is a recommendation of the appropriate type of laser suitable for this technology.
Keywords:
laser material processing
Available at various institutes of the ASCR
Škoda Auto a.s. – Výběr optimálního typu laseru pro laserové popisování plechů
Experimentální popis materiálů laserem s ohledem na technologické požadavky v zadání – použití vhodných typů laserů na základě rešerše (fáze I) a specifikování jejich klíčových technických parametrů ...
L.E.T. optomechanika Praha, spol. s.r.o. – testování tenkých vrstev vytvořených napařováním a naprašováním
Řeháková, Martina
2015 - Czech
Byly otestovány tenké vrstvy vytvořené napařováním a naprašováním, které jsou používány pro optické komponenty výkonových laserů, podle požadavků zadavatele.: materiály podložek: floutová skla, borosilikátová skla, apod.; antireflexní vrstvy širokopásmové, dvouvrstvé, jednoduché; reflexní vrstvy Al, Al + SiO2, +MgF2; vrstvy Cr , Cr2O3, Au a případně další varianty dle požadavků. Were tested by thin layer formed by deposition and sputtering, which are used for optical components power lasers, according to customer requirements.: based material. float glass, borosilicate glass, etc.; broadband anti-reflection coating, dual-layer, single; reflective layer Al, Al + SiO2 + MgF2;layers of Cr, Cr2O3, Au or other variants as required
Keywords:
optical reflective layers; reflectance; thickness of layer; roughness of layer; resistance layers testing in laser beam
Available at various institutes of the ASCR
L.E.T. optomechanika Praha, spol. s.r.o. – testování tenkých vrstev vytvořených napařováním a naprašováním
Byly otestovány tenké vrstvy vytvořené napařováním a naprašováním, které jsou používány pro optické komponenty výkonových laserů, podle požadavků zadavatele.: materiály podložek: floutová skla, ...
Porovnání organických scintilátorů
Nikl, Martin
2013 - Czech
Byly změřeny a porovnány optické, luminiscenční a scintilační charakteristiky vícero vzorků organických scintilátorů. Kvalita zdrojových materiálů pro jejich přípravu měla vliv na jejich scintilační účinnost, méně pak na jejich časové charakteristiky. Byly studovány také procesy přenosu energie. Optical, luminescence and scintillation characteristics of several organic scintillator samples were compared. Quality of starting materials was found to play a role in the efficiency, while timing characteristics were not changed that much. Energy transfer processes were studied as well.
Keywords:
scintillator; luminescence
Available at various institutes of the ASCR
Porovnání organických scintilátorů
Byly změřeny a porovnány optické, luminiscenční a scintilační charakteristiky vícero vzorků organických scintilátorů. Kvalita zdrojových materiálů pro jejich přípravu měla vliv na jejich scintilační ...
Příprava a charakterizace vybraných optických materiálů
Hulicius, Eduard
2013 - Czech
Optimalizovali jsme krystalovou strukturu a technologii přípravy, abychom získali lepší parametry PL a RL a také homogenity struktury. Měřili a vyhodnotili jsme strukturní a optické parametry; byl diskutován jejich vliv na charakteristiky krystalu. Navrhli jsme nový vylepšený materiál. P.W = vlnová délka maxima; P.I = intenzita maxima; FWHM = šířka v polovině výška maxima; D.W = dominantní vlnová délka; I.W = integrální vlnová délka; I.I = integrovaná intenzita; R.F = reflektivita; T.H = tloušťka byly změřeny. Crystal structure and technology procedure was optimized to obtained better parameters of PL and RL as well as homogeneity of structure. Structural and optical parameters were measured and evaluated; their influence on crystal characteristics was discussed. New improved material was proposed. P.W = Peak wavelength; P.I = Peak intensity; FWHM = Full With in Half Maximum; D.W = dominant wavelength; I.W = integral w.; I.I = integrated intensity; R.F = reflectivity; T.H = thickness were measured.
Keywords:
optical crystals; photoluminescence; radioluminescence; X-ray diffraction
Available at various institutes of the ASCR
Příprava a charakterizace vybraných optických materiálů
Optimalizovali jsme krystalovou strukturu a technologii přípravy, abychom získali lepší parametry PL a RL a také homogenity struktury. Měřili a vyhodnotili jsme strukturní a optické parametry; byl ...
Preparation and characterzation of optical materials
Nikl, Martin
2012 - English
Technology has been optimized to provide longer cylindrical parts of an optical crystal for laser applications. Specific optical characteristics along the crystals grown have been measured and evaluated. At another kind of laser crystals the specific impurities were followed by magnetic and optical spectroscopies and their influence on crystal characteristics was discussed.
Keywords:
optical crystals; defect centers; laser
Available at various institutes of the ASCR
Preparation and characterzation of optical materials
Technology has been optimized to provide longer cylindrical parts of an optical crystal for laser applications. Specific optical characteristics along the crystals grown have been measured and ...
Quantum theory of microworld and the reality
Lokajíček st., Miloš
2004 - English
Keywords:
quantum mechanics; time evolution; duality problem; extended Hilbert space
Available at various institutes of the ASCR
Quantum theory of microworld and the reality
Quantum theory of microworld and the reality
Lokajíček st., Miloš
2004 - English
Keywords:
quantum mechanics; superposition principle; extended Hilbert space; time evolution
Available at various institutes of the ASCR
Quantum theory of microworld and the reality
Quantum mechanics and irreversible time flow
Lokajíček st., Miloš
2002 - English
Keywords:
quantum mechanics; time evolution; quantum phase; extended Hilbert space
Available at various institutes of the ASCR
Quantum mechanics and irreversible time flow
NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web
Send your suggestions and comments to nusl@techlib.cz
Provider
Other bases