No (7633)
Yes (1654)
Number of found documents:
9287
Published from
to
Book of abstracts of the 1st outdoor seminar of the Department of Optical Materials: Advances in the new materials engineering and study
Buryi, Maksym; Král, Robert
2023 - English
The seminar is dedicated to the main activities of the department of Optical Materials, FZU - Institute of Physics of the Czech Academy of Sciences in the course of national and international collaborations. In particular, the advanced methods of the (nano)materials synthesis, fabrication, and characterization are presented and discussed in detail. The aim of the seminar is to establish more of the effective paths of communication and data exchange by creating and maintaining links among the teams of national and international experts in various fields of physical and chemical knowledge, both experimental and theoretical.
Keywords:
nanomaterials; synthesis; data exchange
Fulltext is available at external website.
Book of abstracts of the 1st outdoor seminar of the Department of Optical Materials: Advances in the new materials engineering and study
The seminar is dedicated to the main activities of the department of Optical Materials, FZU - Institute of Physics of the Czech Academy of Sciences in the course of national and international ...
Stereolithography for manufacturing of advanced porous solids
Drechslerová, V.; Neuhäuserová, M.; Falta, J.; Šleichrt, J.; Kytýř, Daniel
2023 - English
The aim of this paper is focused on benefits of stereolithography (SLA) technology for the fabrication of the lightweight lattice structures with potential for load-bearing function and high absorption of impact energy. SLA is an additive manufacturing technology employing the principle of liquid resins curing moderated by radiation of a wavelength from ultra-violet band where resulting material parameters are tunable by setting of the curing process. The batches of samples manufactured using three different resins were subjected to quasi-static uni-axial tensile and compression tests. Acquired data were processed to derive deformation behaviour expressed as stress-strain diagrams and fundamental material properties. Based on the knowledge obtained from the mechanical tests, the setup of the fabrication parameters, the most suitable resin for manufacturing of the lattice structures and the overall suitability of SLA technology for the fabrication of advanced porous materials, were determined.
Keywords:
stereolithography; advanced porous materials; quasi-static testing; resin; mechanical characteristics
Available at various institutes of the ASCR
Stereolithography for manufacturing of advanced porous solids
The aim of this paper is focused on benefits of stereolithography (SLA) technology for the fabrication of the lightweight lattice structures with potential for load-bearing function and high ...
Statistical Approach for BTT probes distribution
Mekhalfia, Mohammed Lamine; Procházka, Pavel; Šmíd, R.; Tchawou Tchuisseu, Eder Batista
2023 - English
Blade tip timing (BTT) system is a non-invasive method used for measuring the blade tip timing of rotating machinery. The BTT system typically consists of sensor probes, signal conditioning system, and data acquisition unit. The sensor probes are placed in proximity to the rotating blade tips, Sensors measure the time at which each blade passes by the probe. By measuring the blade tip timing, the BTT system can detect changes in the blade tip vibration, which is an important for the health monitoring and performance optimization of rotating machinery [1]. To ensure accurate measurement of blade tip timing, the probe arrangement is crucial. The placement of the probe relative to the blade tips can affect the measurement accuracy, and thus, several arrangement algorithms have been developed to optimize the placement of the probes. Instead of considering the condition number, a statistical algorithms is followed to optimize the placement of probes for accurate measurement of blade tip timing in turbo-machinery. The statistical approach will be employed to determine the optimal locations for probes, with the aim of reducing errors in the measurement of blade tip timing. \n
Keywords:
blade tip timing principle; RMSE; blade´s dynamics
Available at various institutes of the ASCR
Statistical Approach for BTT probes distribution
Blade tip timing (BTT) system is a non-invasive method used for measuring the blade tip timing of rotating machinery. The BTT system typically consists of sensor probes, signal conditioning system, ...
The design of Bayesian diagnostic expert system Querix and it’s engineering application
Věchet, Stanislav; Krejsa, Jiří; Chen, K.-S.
2023 - English
Expert systems have gained attention over the last two decades as they bring the possibility of using expert knowledge in various control systems. However, it has lost attraction in favor of artificial neural networks in recent years, which is mostly influenced by the availability of data to train neural network models and the availability of various frameworks to achieve fast time-to-market applications for given solutions.
Keywords:
expert system; decision making; advanced diagnostic; autonomous navigation; RPA
Available at various institutes of the ASCR
The design of Bayesian diagnostic expert system Querix and it’s engineering application
Expert systems have gained attention over the last two decades as they bring the possibility of using expert knowledge in various control systems. However, it has lost attraction in favor of ...
Programs and Algorithms of Numerical Mathematics 21 : Jablonec nad Nisou, June 19-24, 2022 : Proceedings of Seminar
Chleboun, J.; Kůs, Pavel; Papež, Jan; Rozložník, Miroslav; Segeth, Karel; Šístek, Jakub
2023 - English
These proceedings contain peer-reviewed papers that are based on the invited lectures, short communications, and posters presented at the 21st seminar Programs and Algorithms of Numerical Mathematics (PANM) held in Merkur Hotel, Jablonec nad Nisou, Czech Republic, June 19-24, 2022.\nThe seminar was organized by the Institute of Mathematics of the Czech Academy of Sciences under the auspices of EU-MATHS-IN.CZ, Czech Network for Mathematics in Industry, and with the nancial support provided by the RSJ Foundation. It continued the previous seminars on mathematical software and numerical methods held (biennially, with only one exception) in Alšovice, Bratříkov, Janov nad Nisou, Kořenov, Lázně Libverda, Dolní Maxov, Prague, and Hejnice in the period 1983-2020. The objective of this series of seminars is to provide a forum for presenting and discussing advanced topics in numerical analysis, computer implementation of numerical algorithms, new approaches to mathematical modeling, and single- or multi-processor applications of computational methods.
Keywords:
numerical mathematics
Available in digital repository of the ASCR
Programs and Algorithms of Numerical Mathematics 21 : Jablonec nad Nisou, June 19-24, 2022 : Proceedings of Seminar
These proceedings contain peer-reviewed papers that are based on the invited lectures, short communications, and posters presented at the 21st seminar Programs and Algorithms of Numerical Mathematics ...
Statistical Method Selection Matters: Vanilla Methods in Regression May Yield Misleading Results
Kalina, Jan
2023 - English
The primary aim of this work is to illustrate the importance of the choice of the appropriate methods for the statistical analysis of economic data. Typically, there exist several alternative versions of common statistical methods for every statistical modeling task\nand the most habitually used (“vanilla”) versions may yield rather misleading results in nonstandard situations. Linear regression is considered here as the most fundamental econometric model. First, the analysis of a world tourism dataset is presented, where the number of international arrivals is modeled for 140 countries of the world as a response of 14 pillars (indicators) of the Travel and Tourism Competitiveness Index. Heteroscedasticity is clearly recognized in the dataset. However, the Aitken estimator, which would be the standard remedy in such a situation, is revealed here to be very inappropriate. Regression quantiles represent a much more suitable solution here. The second illustration with artificial data reveals standard regression quantiles to be unsuitable for data contaminated by outlying values. Their recently proposed robust version turns out to be much more appropriate. Both\nillustrations reveal that choosing suitable methods represent an important (and often difficult) part of the analysis of economic data.
Keywords:
linear regression; assumptions; non-standard situations; robustness; diagnostics
Fulltext is available at external website.
Statistical Method Selection Matters: Vanilla Methods in Regression May Yield Misleading Results
The primary aim of this work is to illustrate the importance of the choice of the appropriate methods for the statistical analysis of economic data. Typically, there exist several alternative versions ...
Effect of spin coating on electrical properties of MXene films deposited from non-aqueous solvents
Gutsul, O.; Szabó, Ondrej; Pfeifer, R.; Sasitharan, K.; Jackivová, Rajisa; Slobodyan, V.; Kromka, Alexander; Rezek, B.
2023 - English
We investigated the effect of spin coating parameters on the electrical properties of Ti3C2 MXene thin films deposited from non-aqueous suspensions in N,N-dimethyl formamide (DMF) and N-methyl-2-pyrrolidone (NMP) on gold interdigitated electrodes (IDE). The electrical properties of DMF-MXenes and NMP-MXenes films are characterized by impedance spectroscopy (4 Hz - 8 MHz at 1 V) using gold IDE with 25 µm gap. The electrical conductivity of MXene films decreases with increasing spin coating speed from 300 to 900 rpm. The series resistance (Rs) and double layer capacitance remain similar (Cdl). In all cases, MXenes deposited from DMF have five orders of magnitude higher electrical conductivity (lower Rct) than MXene films deposited from NMP. It is correlated with the thin film morphology obtained by scanning electron microscopy (SEM). These findings can be useful for possible application of MXenes as charge transport layers in hybrid photovoltaic devices.
Keywords:
MXene; thin films; impedance spectroscopy; electrical conductivity; spin coating
Available at various institutes of the ASCR
Effect of spin coating on electrical properties of MXene films deposited from non-aqueous solvents
We investigated the effect of spin coating parameters on the electrical properties of Ti3C2 MXene thin films deposited from non-aqueous suspensions in N,N-dimethyl formamide (DMF) and ...
Effect of aging on mechanical properties of 3D printed samples using stereolithography
Drechslerová, V.; Falta, J.; Fíla, T.; Dvořák, R.; Kytýř, Daniel
2023 - English
This paper focuses on stereolithography (an additive manufacturing technology working on the principle of curing liquid resins layer by layer using ultraviolet radiation) and the effect of aging on the mechanical properties of the material and printed samples. The aging of the material could be a problem for its subsequent use as the stability of the mechanical properties would not be maintained and unwanted deterioration of the material could occur. As part of the research, sets of samples were printed and subjected to different aging methods and subsequently subjected to quasi-static and dynamic uni-axial load tests. From the data obtained, the basic mechanical properties of the material were calculated and compared with each other. The aim of this paper was to investigate whether aging process causes significant changes in the mechanical properties of the materials used, which could have a consequential impact on their use in different industries.
Keywords:
stereolithography; aging; mechanical properties
Available at various institutes of the ASCR
Effect of aging on mechanical properties of 3D printed samples using stereolithography
This paper focuses on stereolithography (an additive manufacturing technology working on the principle of curing liquid resins layer by layer using ultraviolet radiation) and the effect of aging on ...
Computed tomography system with strict real-time synchronization for in-situ 3D analysis of periodically vibrating objects
Rada, Václav; Fíla, Tomáš; Zlámal, Petr; Koudelka_ml., Petr; Šleichrt, Jan; Macháček, Michael; Vavřík, Daniel; Kytýř, Daniel
2023 - English
In the contribution, we present a laboratory system capable of X-ray computed tomography (XCT) scanning of an periodically moving or oscillating object. The system is an in-house developed XCT setup with electromagnetic voice coil actuator mounted on top of the rotary stage of the setup. The strict synchronization of the components, the rotary stage, the electromagnetic actuator movement and the detector readout is accomplished with use of the detector hardware trigger and hard real-time Linux operating system. Cylindrical sample manufactured from epoxy resin with metal particles to enable movement tracking is scanned in a stationary position and during periodical movement induced by the vibration stage. The volumetric data of the scans is compared and the results of this contribution represent an important step towards identification of defects through modal analysis of in-situ harmonically vibrating object.
Keywords:
computed tomography; hardware trigger; harmonic motion; realtime synchronization
Available at various institutes of the ASCR
Computed tomography system with strict real-time synchronization for in-situ 3D analysis of periodically vibrating objects
In the contribution, we present a laboratory system capable of X-ray computed tomography (XCT) scanning of an periodically moving or oscillating object. The system is an in-house developed XCT setup ...
Summary of the Liquid-Gas Ejector Hydraulic Behavior - Theory and Practice
Gebouský, Ondřej; Haidl, Jan
2023 - English
Liquid-gas ejectors (LGEs) are fascinating devices that use the kinetic energy of the liquid jet to entrain and eventually compress the gas. LGEs find applications in both industry and everyday life, e.g., as sprayers. However, a complex and reliable method for LGE design was not available in the open literature until recently. This contribution follows up on our recent works about the hydraulic behavior of LGE with undisturbed and destabilized liquid jets. This paper aims to summarize the device’s complicated hydraulics and characterize its optimal design for three industrially relevant applications - (a) LGE as the vacuum pump, (b) LGE as the gas purification equipment, and (c) LGE as the gas distributor for bioreactors.
Keywords:
liquid-gas ejector; jet pump; design method
Available in digital repository of the ASCR
Summary of the Liquid-Gas Ejector Hydraulic Behavior - Theory and Practice
Liquid-gas ejectors (LGEs) are fascinating devices that use the kinetic energy of the liquid jet to entrain and eventually compress the gas. LGEs find applications in both industry and everyday life, ...
NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web
Send your suggestions and comments to nusl@techlib.cz
Provider
Other bases