Technical manual - neosted SOT test bench
Steiger, Lukáš
2018 - anglický
The purpose of this document is to provide basic set of rules and instructions that allows using and maintaining of the NEOSTED SOT test bench (BB).\nFurther detailed informations and proper references about individual parts of the BB system can be found in [AD-2, AD-3].
Klíčová slova:
test bench; optical testing; collimator; neosted
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Technical manual - neosted SOT test bench
The purpose of this document is to provide basic set of rules and instructions that allows using and maintaining of the NEOSTED SOT test bench (BB).\nFurther detailed informations and proper ...
Vývoj procesu mytí a příprava povrchu před depozicí
Budasz, Jiří
2018 - český
Zpráva popisuje vývoj mycího postupu substrátů pro výrobu superodrazných zrcadel. Zahrnuje také vývoj procesu ošetření povrchu ve vakuu. The report deals with a development of cleaning precedure of substrates used for producing high reflective mirrors. It involves pre-deposition treatment of the surface in vacuum chamber.
Klíčová slova:
High reflective coatings; cleaning; pre-deposition treatment
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Vývoj procesu mytí a příprava povrchu před depozicí
Zpráva popisuje vývoj mycího postupu substrátů pro výrobu superodrazných zrcadel. Zahrnuje také vývoj procesu ošetření povrchu ve vakuu....
Electric probe measurements in the anode area of a DC arc plasma torch at low pressure
Ondáč, Peter; Mašláni, Alan; Hrabovský, Milan
2018 - anglický
We measured radial profiles of the electric field, plasma electrical potential and electron temperature in the hot anode area of a hybrid water-argon DC arc plasma torch with an external anode. The measurements were made under different values of the ambient pressure, during the restrike mode with a constricted anode arc attachment or during a supersonic mode with a diffuse anode arc attachment. The results provide first experimental data on plasma electrical potential in that anode area.
Klíčová slova:
plasma; arc; anode; low pressure; electric probes
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Electric probe measurements in the anode area of a DC arc plasma torch at low pressure
We measured radial profiles of the electric field, plasma electrical potential and electron temperature in the hot anode area of a hybrid water-argon DC arc plasma torch with an external anode. The ...
Optický prvek 2G20 6x8x mm
Pintr, Pavel
2018 - český
Optický prvek 2G20 6x8 mm je určen pro proměnné dopravní značení (PDZ) v dopravě . Zajišťuje promíchání RGB diod na bílé světlo a jeho usměrnění do směru dle normy ČSN EN 12966 třídy B6. \n Optical element 2G20 6x8 mm is designed for a variable traffic marking. It assures the mixing of RGB diodes in white light and its direction in accordance with the specification ČSN EN 12966 class B6.
Klíčová slova:
optical element; 2G20 6x8 mm; PDZ
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Optický prvek 2G20 6x8x mm
Optický prvek 2G20 6x8 mm je určen pro proměnné dopravní značení (PDZ) v dopravě . Zajišťuje promíchání RGB diod na bílé světlo a jeho usměrnění do směru dle normy ČSN EN 12966 třídy B6. ...
Dalekohledy typu Dall-Kirkham
Rail, Zdeněk; Ulrichová, Iva; Kuryshev, V.; Vápenka, David
2018 - český
Referát se zabývá optickými vadami dvojzrcadlových dalekohledů s elipsoidálními primárními a sférickými sekundárními zrcadly. Systém byl objeven na konci dvacátých let minulého století Horacem Dallem a Alanem Kirkhamem. Jeho optické prvky jsou snadno vyrobitelné a měřitelné. Tyto dalekohledy lze vybavit korektory a vytvořit z nich víceúčelové přístroje jak pro planetární pozorování, tak pro fotografování širokých zorných polí. Několik takových přístrojů bylo vyrobeno i v dílně Centra Toptec v Turnově. The paper deals with the optical aberrations of the two-mirror telescopes composed of the ellipsoidal primary and the spherical secondary mirrors. The system was discovered by Horace Dall and Alan Kirkham at the end of the Twenties of the 20th Century. Its optical elements are easy to manufacture and measure. These telescopes can be equipped by lens correctors and turned into multipurpose devices both for planetary observation and wide field photography. Several telescopes were manufactured in workshop of the Toptec Center in Turnov.
Klíčová slova:
Two-mirror telescope; field corrector; optical aberrations; spherochromatic aberration; koma; astigmatism
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Dalekohledy typu Dall-Kirkham
Referát se zabývá optickými vadami dvojzrcadlových dalekohledů s elipsoidálními primárními a sférickými sekundárními zrcadly. Systém byl objeven na konci dvacátých let minulého století Horacem Dallem ...
The effect of spark plasma sintering on the porosity and mechanical properties of Ti-15Mo alloy
Terynková, A.; Kozlík, J.; Bartha, K.; Chráska, Tomáš; Dlabáček, Zdeněk; Stráský, J.
2018 - anglický
Metastable β-titanium alloys are receiving much interest for various applications such as aircraft industry and medicine thanks to their excellent mechanical properties and biocompatibility. The common way of preparing the titanium alloys is hindered by its production costs. Powder metallurgy (PM) approach is a promising route for cost-effective fabrication of titanium alloys due to possibility of near net shaping. In this study, binary biomedical Ti-15Mo alloy was prepared by PM. Gas atomized powder was sintered by spark plasma sintering (SPS) above the β-transus temperature of the studied alloy. The compaction of the powders was accomplished by short-time sintering. The effect of the time of sintering on the porosity and the microhardness in centre part as well as in periphery part of the sample was investigated. The samples revealed significant inhomogeneity the porosity increases with the distance from the centre of the specimen. With increasing sintering times the porosity decreases and simultaneously the microhardness increases.
Klíčová slova:
Metastable β-titanium alloys; Porosity; Powder metallurgy; Spark plasma sintering
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
The effect of spark plasma sintering on the porosity and mechanical properties of Ti-15Mo alloy
Metastable β-titanium alloys are receiving much interest for various applications such as aircraft industry and medicine thanks to their excellent mechanical properties and biocompatibility. The ...
Optický element pro dopravní tabule 2G25 varA
Pintr, Pavel
2018 - český
Výzkumná zpráva popisuje vývoj a měření optiky pro dopravní informační tabule označenou jako 2G25 varA. První část zprávy popisuje vývoj kolimovaného svazku a tvorbu obdélníkového spotu dle požadavků normy ČSN EN 12966. Druhá část zprávy popisuje provedená optická měření. The optical element 2G25 varA is designed according the specification ČSN EN 12966 class B6 for traffic marking. The front optical lens is freeform optics with polynomial coefficients. This element uses RGB LED for mixing white light.
Klíčová slova:
optical element; freeform; ČSN EN 12966
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Optický element pro dopravní tabule 2G25 varA
Výzkumná zpráva popisuje vývoj a měření optiky pro dopravní informační tabule označenou jako 2G25 varA. První část zprávy popisuje vývoj kolimovaného svazku a tvorbu obdélníkového spotu dle požadavků ...
Vývoj optického řešení Prototypu II
Pintr, Pavel
2018 - český
Zpráva popisuje vývoj aktivní laserové hlavice. Zpráva je rozdělena do dvou etap. První etapa popisuje vývoj navařovací laserové hlavice s obdélníkovým spotem. Druhá část popisuje vývoj svařovací hlavice s proměnným zvětšením. This report describes the development of an active laser head. This report is separated into two sections. First section describes a development of laser head with the rectangular spot. The second section describes a development of welding laser head with the adaptive zoom.
Klíčová slova:
laser head; active optics; LIMO
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Vývoj optického řešení Prototypu II
Zpráva popisuje vývoj aktivní laserové hlavice. Zpráva je rozdělena do dvou etap. První etapa popisuje vývoj navařovací laserové hlavice s obdélníkovým spotem. Druhá část popisuje vývoj svařovací ...
Test procedure - neosted SOT test bench
Pleštil, Jan; Steiger, Lukáš; Václavík, Jan; Veselý, Martin
2018 - anglický
This document describes the final design of the NEOSTED SOT Test Bench, i.e. its individual components, and serves as a groundwork for the acceptance test procedure.\nThe test to be performed according to this procedure are to demonstrate the compliance of the above item to the requirements specified in the applicable document [1] as part of the overall verification program. The test results shall be collected in a Test Report.
Klíčová slova:
collimator; optical tests; stage; alignment
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Test procedure - neosted SOT test bench
This document describes the final design of the NEOSTED SOT Test Bench, i.e. its individual components, and serves as a groundwork for the acceptance test procedure.\nThe test to be performed ...
Výzkumná zpráva Projekt MidFree
Beneš, Jiří; Matoušek, Ondřej; Špína, Michal; Tomka, David
2018 - český
Výzkumná zpráva popisující model procesního řetězce, metodiky měření a charakterizace středních frekvencí (MSF), vibrací a hodnocení nástrojů. Research report describing the process chain model, MSF measurement methodology, vibration and tool evaluation.
Klíčová slova:
mid spatial frequencies measurement; vibration measurement
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Výzkumná zpráva Projekt MidFree
Výzkumná zpráva popisující model procesního řetězce, metodiky měření a charakterizace středních frekvencí (MSF), vibrací a hodnocení nástrojů....
NUŠL poskytuje centrální přístup k informacím o šedé literatuře vznikající v ČR v oblastech vědy, výzkumu a vzdělávání. Více informací o šedé literatuře a NUŠL najdete na webu služby.
Vaše náměty a připomínky posílejte na email nusl@techlib.cz
Provozovatel
Zahraniční báze