Edge Effects in Rotational Viscometry III. ZZ and KK Sensors, Total Slip Pseudosimilarity
Wein, Ondřej
2013 - English
This report presents a next step of our effort in developing a system of corrections on edge effects in rotational AWS viscometry. In the previous two reports [4, 5], the edge corrections are given for Newtonian and pseudoplastic liquids with no-slip (adherence) boundary conditions at solid walls (BC).
Keywords:
edge effects; rotational viscometry; zz and kk sensors
Available on request at various institutes of the ASCR
Edge Effects in Rotational Viscometry III. ZZ and KK Sensors, Total Slip Pseudosimilarity
This report presents a next step of our effort in developing a system of corrections on edge effects in rotational AWS viscometry. In the previous two reports [4, 5], the edge corrections are given ...
F3 Factory Deliverable D8.5 on Demonstration Activities in Intensified Surfactant Making
Vanhoutte, D.; Křišťál, Jiří; Stavárek, Petr; Jiřičný, Vladimír; Haas-Santo, K.; Tarchini, R.
2013 - English
the continuos report abou of the project completed within the demonstration stage of the F3 Factory project.
Keywords:
process intensification; microreactors
Available at various institutes of the ASCR
F3 Factory Deliverable D8.5 on Demonstration Activities in Intensified Surfactant Making
the continuos report abou of the project completed within the demonstration stage of the F3 Factory project.
Heat Transfer in MicroSAR Mixers
Křišťál, Jiří; Vajglová, Zuzana
2012 - English
The report presents the finding of the investigation of the heat transfer in microSAR mixers and the comparison with the conventional heat exchangers.
Keywords:
heat transfer; microSAR mixers; conventional heat exchangers
Available at various institutes of the ASCR
Heat Transfer in MicroSAR Mixers
The report presents the finding of the investigation of the heat transfer in microSAR mixers and the comparison with the conventional heat exchangers.
Zpráva o vypracování laboratorních a čtvrtprovozních zkoušek rafinace kapalných výluhů ze dřeva jehličnatých stromů od terpenických látek na protiproudé extrační koloně s vestavbou tvořenou vibrujícími patry VPE 25 s návrhem hlavních rozměrů provozní kolony VPE na požadovanou kapacitu
Heyberger, Aleš; Rousková, Milena; Gruber, Václav
2012 - Czech
Předkládaná výzkumná zpráva prezentuje laboratorní a čtvrtprovozní zkoušky rafinace kapalných výluhů ze dřeva jehličnatých stromů od terpenických látek na protiproudé extrakční koloně s vestavbou tvořenou vibrujícími patry s vypracováním návrhu hlavních rozměrů provozní kolony VPE na požadovanou kapacitu. The reports show results of laboratory and pilot plan tests on refining liquid extracts of coniferous trees wood to remove terpentine compounds by using a counter-current vibrating plates extraction column (VPE). The sizing of the requisite kapacity VPE is provited.
Keywords:
liquid extraction; rafination; medical products
Available at various institutes of the ASCR
Zpráva o vypracování laboratorních a čtvrtprovozních zkoušek rafinace kapalných výluhů ze dřeva jehličnatých stromů od terpenických látek na protiproudé extrační koloně s vestavbou tvořenou vibrujícími patry VPE 25 s návrhem hlavních rozměrů provozní kolony VPE na požadovanou kapacitu
Předkládaná výzkumná zpráva prezentuje laboratorní a čtvrtprovozní zkoušky rafinace kapalných výluhů ze dřeva jehličnatých stromů od terpenických látek na protiproudé extrakční koloně s vestavbou ...
Final Report on Microprocessing of Fluids 2010 – 2011
Křišťál, Jiří; Vajglová, Zuzana
2012 - English
The report summarizes the work carried out within the reseach agreement no. 170306 in 2011/2012.
Keywords:
report; microprocessing of fluids
Available at various institutes of the ASCR
Final Report on Microprocessing of Fluids 2010 – 2011
The report summarizes the work carried out within the reseach agreement no. 170306 in 2011/2012.
Fluidní spalování kontaminované biomasy II
Pohořelý, Michael; Šyc, Michal; Krček, Martin; Tošnarová, Markéta; Durda, Tomáš; Bludská, J.; Svoboda, Karel; Hartman, Miloslav; Punčochář, Miroslav
2012 - Czech
Ve zprávě byla prokázána možnost účinně spalovat předupravenou kukuřičnou slámu ve fluidním reaktoru se stacionární bublinovou vrstvou za přítomnosti významného podílu draslíku. In the report, it has been shown how to effectively burn pretreated cornstalks in the fluidized-bed reactor with a stationary bubbling bed in the presence of a significant proportion of potassium.
Keywords:
fluidized-bed Incineration; contaminated biomass; corn straw
Available at various institutes of the ASCR
Fluidní spalování kontaminované biomasy II
Ve zprávě byla prokázána možnost účinně spalovat předupravenou kukuřičnou slámu ve fluidním reaktoru se stacionární bublinovou vrstvou za přítomnosti významného podílu draslíku....
Experimental Plan for the New IMM and Ehrfeld Split-and-Recombine Micromixers
Preziosi, V.; Křišťál, Jiří
2012 - English
The report presents the experimental plan for the new IMM and Ehrfeld split-and-recombine micromixers.
Keywords:
micromixers; experimental plan; Ehrfeld split
Available at various institutes of the ASCR
Experimental Plan for the New IMM and Ehrfeld Split-and-Recombine Micromixers
The report presents the experimental plan for the new IMM and Ehrfeld split-and-recombine micromixers.
Edge Effects in Rotational Viscometry VI. ZZ- and KK- Type Sensors: No-slip Pseudosimilarity for Inertialess Flow (Revisited)
Wein, Ondřej; Havlica, Jaromír
2012 - English
This report should serve as a manual to the program Prog_cL_m.exe for calculating the correction cL on edge effects in narrow-gap rotational viscometry with almost cylindrical or conical spindles. Referring to the previous Research Report ICPF 2004/8, which deals with the same subject, it includes, in addition, also computation of cL for the entire ZZ and KK sensors with an arbitrary front of bottom semi-sensors (FLAT, CONE, HUB, HAAKE). Detailed attention is paid to numerical aspects: extrapolation/interpolation of the related fields (angular velocity, shear stress, dissipation, local torque contribution) towards the boundaries, including the analytical smoothing at singularities. The source codes for Prog_cL_m.exe, the results of numerical simulations, as well as the resulting correlations for cL , are available on the attached CD, which is an integral part of this report. The inertia effect was computed using commercial software FLUENT 12 for the Z40DIN sensor and applied in an approximate way also for the KK35/23 sensor.
Keywords:
edge effects; rotational viscometry; zz and kk sensors
Available at various institutes of the ASCR
Edge Effects in Rotational Viscometry VI. ZZ- and KK- Type Sensors: No-slip Pseudosimilarity for Inertialess Flow (Revisited)
This report should serve as a manual to the program Prog_cL_m.exe for calculating the correction cL on edge effects in narrow-gap rotational viscometry with almost cylindrical or conical spindles. ...
Prediction of Apparent Viscosity in MicroSAR Mixers from Experimental Pressure Drop
Křišťál, Jiří; Vajglová, Zuzana
2011 - English
The report describes the model for prediction of apparent viscosity based on the experimental pressure drop.
Keywords:
experimental pressure drop; apparent viscosity; microSAR mixers
Available at various institutes of the ASCR
Prediction of Apparent Viscosity in MicroSAR Mixers from Experimental Pressure Drop
The report describes the model for prediction of apparent viscosity based on the experimental pressure drop.
How to Improve Julabo Operation for FMU2?
Křišťál, Jiří
2011 - English
The report describes the procedure for improving the heating system of FMU2 by modifing the control strategy for the Julabo heater
Keywords:
control; heating; pilot plant equiptment
Available at various institutes of the ASCR
How to Improve Julabo Operation for FMU2?
The report describes the procedure for improving the heating system of FMU2 by modifing the control strategy for the Julabo heater
NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web
Send your suggestions and comments to nusl@techlib.cz
Provider
Other bases