Number of found documents: 583
Published from to

Studium vlivu složení ve směsi CsCl-HfCl.sub.4./sub. na její tepelné vlastnosti v uzavřeném systému pomocí DSC analýzy
Král, Robert; Zemenová, Petra; Vaněček, Vojtěch; Bystřický, Aleš
2020 - Czech
Příspěvek se zabývá studiem tepelného chování směsi CsCl-HfCl4 o různém složení (nadbytek Cs- nebo Hf-složky) v uzavřeném systému (křemenné ampuli) pomocí neizotermní DSC analýzy. Ze získaných výsledků a jejich porovnáním s fázovým diagramem CsCl-HfCl4 bylo možné získat důležité informace potřebné k optimalizaci růstu krystalů Cs2HfCl6 vertikální Bridgmanovou metodou. This contribution deals with the study of thermal behavior of CsCl-HfCl4 mixture of various composition (containing excess of Cs- or Hf-component) in enclosed system (quartz ampoule) by non-isothermal DSC analysis. Important information necessary for optimization of the Cs2HfCl6 crystal growth by the vertical Bridgman method were obtained from the comparison of the recorded results and the CsCl-HfCl4 phase diagram. Keywords: CsCl-HfCl.sub.4./sub.; thermal properties; DSC analysis in closed system Available at various institutes of the ASCR
Studium vlivu složení ve směsi CsCl-HfCl.sub.4./sub. na její tepelné vlastnosti v uzavřeném systému pomocí DSC analýzy

Příspěvek se zabývá studiem tepelného chování směsi CsCl-HfCl4 o různém složení (nadbytek Cs- nebo Hf-složky) v uzavřeném systému (křemenné ampuli) pomocí neizotermní DSC analýzy. Ze získaných ...

Král, Robert; Zemenová, Petra; Vaněček, Vojtěch; Bystřický, Aleš
Fyzikální ústav, 2020

Book of Abstracts of the 30.sup.th./sup. Joint Seminar of the Development of Materials Science in Research and Education
Kožíšek, Zdeněk; Král, Robert; Zemenová, Petra
2020 - English
Conference topics: \n- Trends in development of materials research\n- Education of materials science at the universities \n- Information about the research programmes of individual institutions \n- Information on equipment for preparation and characterisation of materials \n- Results of materials science research. Keywords: material sciences Available at various institutes of the ASCR
Book of Abstracts of the 30.sup.th./sup. Joint Seminar of the Development of Materials Science in Research and Education

Conference topics: \n- Trends in development of materials research\n- Education of materials science at the universities \n- Information about the research programmes of individual institutions \n- ...

Kožíšek, Zdeněk; Král, Robert; Zemenová, Petra
Fyzikální ústav, 2020

Závěrečná zpráva projektu „Efektivní využití odpadního tepla“ reg. č. CZ.07.1.02/0.0/0.0/16_040/0000384 realizovaném v rámci výzvy č. 24 OP PPR , technologie 3, stacionární vysokopotenciální zdroje odpadního tepla
Hejtmánek, Jiří; Stachura, Jan
2020 - Czech
Cílem projektu bylo ověřit možnost využití termoelektrických generátorů (dále TEG) k výrobě elektrické energie z odpadního tepla, které je produkováno spalováním fosilního paliva v dopravních prostředcích. S ohledem na charakter jízdního cyklu prostředků veřejné dopravy jsme se na základě konzultací a prozkoumání možností experimentálního testování soustředili na ověření možnosti lepšího využití energie produkované nezávislým topením (NT) s cílem alespoň částečného pokrytí jeho potřeby elektrické energie, která je nutná k jeho provozu. Při provozu NT v autobuse dochází totiž k odběru elektrické energie cca 360 W z elektrické soustavy autobusu, která je potřeba pro pohon oběhového čerpadla, ventilátorů topení a řídící elektroniky NT.\n The aim of the project was to use the waste thermal energy of flue gases or hot steam to produce electricity through thermoelectric generators (TEG). The local production of electricity at the place of its consumption will enable, for example, power source of autonomous sensors, including wireless transmission of necessary information to the control center or power source of safety lights, without installation of the electric cables from the distant power source, which is sometimes technologically difficult. Another specific possible utilization was aimed at the replacement of disposable batteries, which supply the necessary sensors and at the same time serve for sending data to the control center, which is energy demanding.\n Keywords: využití odpadniho tepla; termoelektrická konverse Available at various institutes of the ASCR
Závěrečná zpráva projektu „Efektivní využití odpadního tepla“ reg. č. CZ.07.1.02/0.0/0.0/16_040/0000384 realizovaném v rámci výzvy č. 24 OP PPR , technologie 3, stacionární vysokopotenciální zdroje odpadního tepla

Cílem projektu bylo ověřit možnost využití termoelektrických generátorů (dále TEG) k výrobě elektrické energie z odpadního tepla, které je produkováno spalováním fosilního paliva v dopravních ...

Hejtmánek, Jiří; Stachura, Jan
Fyzikální ústav, 2020

Mass production of hydrogenated ZnO nanorods
Chang, Yu-Ying; Remeš, Zdeněk; Míčová, J.
2020 - English
We have developed an inexpensive and efficient technology of hydrothermal growth of ZnO nanorods from zinc nitrate hexahydrate (Zn(NO3)2·6H2O), as a precursor and hexamethylenetetramine (HMTA) (C6H12N4), as a surfactant followed by plasma hydrogenation in a novel inductively coupled plasma (ICP) quartz reactor and equipped with the rotary sample holder to stir powder during plasma treatment. We have optimized the photoluminescence spectroscopy for measuring optical scattering samples with the high sensitivity, precise sample positioning and very low influence of the scattered excitation light. Here we present the latest results on the enhancement of the UV photoluminescence of the ZnO nanorods after plasma hydrogenation. The exciton-related photoluminescence has been significantly enhanced whereas the deep defect related yellow photoluminescence has been significantly decreased.\n Keywords: nanomaterials; ZnO; photoluminescence; excitons; inductively coupled plasma; hydrogenation Available at various institutes of the ASCR
Mass production of hydrogenated ZnO nanorods

We have developed an inexpensive and efficient technology of hydrothermal growth of ZnO nanorods from zinc nitrate hexahydrate (Zn(NO3)2·6H2O), as a precursor and hexamethylenetetramine (HMTA) ...

Chang, Yu-Ying; Remeš, Zdeněk; Míčová, J.
Fyzikální ústav, 2020

Compression of ecaped titanium micro-pillars for two principal orientations
Vokoun, David; Maňák, Jan; Tesař, Karel; Habr, Stanislav
2020 - English
The thermomechanical processing by equal-channel angular pressing (ECAP) is used for certain metals and alloys in order to make their structure fine and to increase material strength. In the previous study done at our institute, grade 2 titanium was successfully processed using four consecutive route A passes via a 90° ECAP die with high backpressure at room temperature. Orientation dependence of compressive and tensile loading of ECAPed titanium samples was demonstrated at macro-scale. However, scarce attention has been paid so far to the mechanical behavior of ECAPed titanium samples at micro-scale. In the present study, compression experiments on titanium micro-pillars, fabricated using focused ion beam, are carried out for two main directions in respect to preceding ECAP pressing (insert and extrusion directions). The purpose of this study is to discuss the orientation dependence of mechanical response during compression of the as-ECAPed titanium micro-pillars. Keywords: ECAP; micro-pillar; titanium Available in digital repository of the ASCR
Compression of ecaped titanium micro-pillars for two principal orientations

The thermomechanical processing by equal-channel angular pressing (ECAP) is used for certain metals and alloys in order to make their structure fine and to increase material strength. In the previous ...

Vokoun, David; Maňák, Jan; Tesař, Karel; Habr, Stanislav
Fyzikální ústav, 2020

Laser-induced surface acoustic waves for thin film characterization
Kudělka, R.; Václavek, L.; Tomáštík, Jan; Malecová, S.; Čtvrtlík, R.
2020 - English
Knowledge of mechanical properties of thin films is essential for most of their applications.However, their determination can be problematic for very thin films. LAW (Laser-induced acousticwaves) is a combined acousto-optic method capable of measuring films with thickness from fewnanometers. It utilizes ultrasound surface waves which are excited via short laser pulses and detectedby a PVDF foil. Properties such as Young’s modulus, Poisson’s ratio and density of both the film andthe substrate as well as film thickness can be explored.Results from the LAW method are successfullycompared with nanoindentation for Young’s modulus evaluation and with optical method for filmthickness evaluation and also with literature data. Application of LAW for anisotropy mapping ofmaterials with cubic crystallographic lattice is also demonstrated Keywords: anisotropy; laser-induced surface acoustic waves; nanoindentation; Young’s modulus; thin films Available at various institutes of the ASCR
Laser-induced surface acoustic waves for thin film characterization

Knowledge of mechanical properties of thin films is essential for most of their applications.However, their determination can be problematic for very thin films. LAW (Laser-induced acousticwaves) is a ...

Kudělka, R.; Václavek, L.; Tomáštík, Jan; Malecová, S.; Čtvrtlík, R.
Fyzikální ústav, 2020

Characterization of titanium laser welds
Chmelíčková, H.; Hiklová, H.; Václavek, L.; Tomáštík, J.; Čtvrtlík, Radim
2020 - English
Butt welding of commercially pure titanium Grade 1 and Ti6Al4V alloy sheets using a pulsed Nd:YAG laser KLS 246 - 102 LASAG were carried out to determine optimal values of pulse energy and pulse length to create completely penetrated weld. Surface peak power density of about 3.105 W.cm−2 was found as an optimal value. Weld dimensions, both face width and penetration depth, are found to be proportional to increasing energy and decreasing pulse length. Gentle sagging and root penetration were revealed by means of contact surface profilometry. The nanohardness tests on transverse cross-sections detected approximately 50% higher hardness in the fusion zone than in the base material.\n Keywords: elasticity; laser welding; nanohardness; surface profile; titanium Available at various institutes of the ASCR
Characterization of titanium laser welds

Butt welding of commercially pure titanium Grade 1 and Ti6Al4V alloy sheets using a pulsed Nd:YAG laser KLS 246 - 102 LASAG were carried out to determine optimal values of pulse energy and pulse ...

Chmelíčková, H.; Hiklová, H.; Václavek, L.; Tomáštík, J.; Čtvrtlík, Radim
Fyzikální ústav, 2020

Fracture behavior of FeAlSi intermetallics
Čech, J.; Haušild, P.; Karlík, M.; Nová, K.; Průša, F.; Novák, P.; Kopeček, Jaromír
2020 - English
The study is devoted to the intermetallic alloy FeAl20Si20 (wt.%) with the potential applications in high temperature aggressive environments. The samples of the same chemical composition were prepared by spark plasma sintering from the different mechanically alloyed powders (pure elements and pre-alloyed powders). Keywords: FeAlSi; fracture toughness; nanoindentation; SPS Available at various institutes of the ASCR
Fracture behavior of FeAlSi intermetallics

The study is devoted to the intermetallic alloy FeAl20Si20 (wt.%) with the potential applications in high temperature aggressive environments. The samples of the same chemical composition were ...

Čech, J.; Haušild, P.; Karlík, M.; Nová, K.; Průša, F.; Novák, P.; Kopeček, Jaromír
Fyzikální ústav, 2020

Mathematical method for submolecular resolution of helicene-based macrocycles by atomic force microscopy in air
Ukraintsev, Egor; Houska, Václav; Vacek, Jaroslav; Starý, Ivo; Stará, Irena G.; Rezek, B.
2020 - English
We introduce a straightforward mathematical method for improving the AFM image resolution, applied to image analysis of helicene-based macrocycles adsorbed on HOPG. The method reveals structural details from insufficiently resolved AFM images and attributes them to internal structure and ordering of the macrocycles. Our findings are also corroborated by molecular mechanics simulations, validating that the structure provided by the method has lower potential energy compared to other tested macrocycle arrangements. Keywords: atomic force microscope; mathematical modeling; submolecular resolution; macrocycles; molecular mechanics simulations Available at various institutes of the ASCR
Mathematical method for submolecular resolution of helicene-based macrocycles by atomic force microscopy in air

We introduce a straightforward mathematical method for improving the AFM image resolution, applied to image analysis of helicene-based macrocycles adsorbed on HOPG. The method reveals structural ...

Ukraintsev, Egor; Houska, Václav; Vacek, Jaroslav; Starý, Ivo; Stará, Irena G.; Rezek, B.
Fyzikální ústav, 2020

Závěrečná zpráva projektu „Efektivní využití odpadního tepla“ reg. č. CZ.07.1.02/0.0/0.0/16_040/0000384 realizovaném v rámci výzvy č. 24 OP PPR, technologie 1, mobilní zdroje odpadního tepla
Knížek, Karel; Stachura, Jan
2020 - Czech
Cílem projektu bylo ověřit možnost využití termoelektrických generátorů (dále TEG) k výrobě elektrické energie z odpadního tepla, které je produkováno spalováním fosilního paliva v dopravních prostředcích. S ohledem na charakter jízdního cyklu prostředků veřejné dopravy jsme se na základě konzultací a prozkoumání možností experimentálního testování soustředili na ověření možnosti lepšího využití energie produkované nezávislým topením (NT) s cílem alespoň částečného pokrytí jeho potřeby elektrické energie, která je nutná k jeho provozu. Při provozu NT v autobuse dochází totiž k odběru elektrické energie cca 360 W z elektrické soustavy autobusu, která je potřeba pro pohon oběhového čerpadla, ventilátorů topení a řídící elektroniky NT.\n The aim of the project was to verify the possibility of using thermoelectric generators (TEG) to produce electricity from waste heat, which is produced by fossil fuel combustion in vehicles. Regarding the character of the public transport cycle and based on consultations and exploring experimental testing, we have focused on the possible improvement of the utilization of the energy that is produced by independent heater (IT) in order to at least partially cover the electric consumption needed for the running of the IT. During the operation of the IT in the bus, approximately 360 W of electricity is taken from the bus's electrical system, which is needed to drive the circulation pump, the heating fans and the IT control electronics.\n Keywords: využití odpadního tepla; termoelektrická konverse Available at various institutes of the ASCR
Závěrečná zpráva projektu „Efektivní využití odpadního tepla“ reg. č. CZ.07.1.02/0.0/0.0/16_040/0000384 realizovaném v rámci výzvy č. 24 OP PPR, technologie 1, mobilní zdroje odpadního tepla

Cílem projektu bylo ověřit možnost využití termoelektrických generátorů (dále TEG) k výrobě elektrické energie z odpadního tepla, které je produkováno spalováním fosilního paliva v dopravních ...

Knížek, Karel; Stachura, Jan
Fyzikální ústav, 2020

About project

NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web

Send your suggestions and comments to nusl@techlib.cz

Provider

http://www.techlib.cz

Facebook

Other bases