Number of found documents: 382
Published from to

Ceramic protection of anti-corrosion layers of 3-glycidyloxypropyl-triethoxysilane on steel
Pokorný, P.; Prodanović, N.; Janata, Marek; Brožek, Vlastimil
2023 - English
There are various variations on the problem of steel reinforcement bond strength in concrete. Along with geometrical considerations, corrosion performance of steels with varying chemical compositions in interaction with variable chemical compositions of concrete are crucial. One approach is to cover steel surfaces with organosilane compounds, which increases the reinforcement resistance to corrosion in both acidic and alkaline conditions but, on the other hand, may weaken the reinforcement bond strength on concrete. The issue is resolved by intentionally forming a thin-walled, highly adhering corundum layer that is highly porous and impregnated with 3-glycidyloxypropyltriethoxysilane. This procedure also includes testing the adhesion properties between the ceramic and the metal and the cement prior to conducting a corrosion test in a chloride environment. Keywords: steel; concrete; ceramics Available at various institutes of the ASCR
Ceramic protection of anti-corrosion layers of 3-glycidyloxypropyl-triethoxysilane on steel

There are various variations on the problem of steel reinforcement bond strength in concrete. Along with geometrical considerations, corrosion performance of steels with varying chemical compositions ...

Pokorný, P.; Prodanović, N.; Janata, Marek; Brožek, Vlastimil
Ústav fyziky plazmatu, 2023

Ceramic protection of anti-corrosion layers of 3-glycidyloxypropyl-triethoxysilane on steel
Pokorný, P.; Janata, Marek; Brožek, Vlastimil
2023 - English
There are various variations on the problem of steel reinforcement bond strength in concrete. Along with geometrical considerations, corrosion performance of steels with varying chemical compositions in interaction with variable chemical compositions of concrete are crucial. One approach is to cover steel surfaces with organosilane compounds, which increases the reinforcement resistance to corrosion in both acidic and alkaline conditions but, on the other hand, may weaken the reinforcement bond strength on concrete. The issue is resolved by intentionally forming a thin-walled, highly adhering corundum layer that is highly porous and impregnated with 3-glycidyloxypropyltriethoxysilane. This procedure also includes testing the adhesion properties between the ceramic and the metal and the cement prior to conducting a corrosion test in a chloride environment. Keywords: ceramic protection; 3-glycidyloxypropyl-triethoxysilane; steel Fulltext is available at external website.
Ceramic protection of anti-corrosion layers of 3-glycidyloxypropyl-triethoxysilane on steel

There are various variations on the problem of steel reinforcement bond strength in concrete. Along with geometrical considerations, corrosion performance of steels with varying chemical compositions ...

Pokorný, P.; Janata, Marek; Brožek, Vlastimil
Ústav fyziky plazmatu, 2023

Composite coatings containing nanometric constituents prepared by plasma spraying with liquid feedstocks
Mušálek, Radek; Tesař, Tomáš; Medřický, Jan; Čížek, Jan; Lukáč, František
2021 - English
Plasma spraying of liquid feedstocks allows deposition of materials with novel microstructures. Due to the combination of a liquid carrier and ultrafine powders (in case of suspensions) or in-situ formation of the final material in the plasma jet (in case of solutions), preparation of ultrafine composites is possible, typically in a form of coatings on the substrates. Moreover, both suspension and solution spraying routes can be easily combined, either together or even with conventional plasma spraying of coarse dry powders, thus merging benefits of “nanometric” and “micrometric” constituents in the final composite microstructure. As a consequence, liquid feedstock plasma spraying represents an industrially-relevant deposition process with wide variability, providing coatings with properties tailored for various applications ranging from compact wear-resistant layers, porous thermal barrier coatings, bio-compatible medical coatings, catalyst carriers, fuel-cells, etc. The paper introduces several examples of such ultrafine coatings recently deposited at IPP CAS using hybrid water-stabilized plasma torch. Keywords: Coatings; Functionally graded materials (FGMs); Liquid feedstock; Plasma spraying Fulltext is available at external website.
Composite coatings containing nanometric constituents prepared by plasma spraying with liquid feedstocks

Plasma spraying of liquid feedstocks allows deposition of materials with novel microstructures. Due to the combination of a liquid carrier and ultrafine powders (in case of suspensions) or in-situ ...

Mušálek, Radek; Tesař, Tomáš; Medřický, Jan; Čížek, Jan; Lukáč, František
Ústav fyziky plazmatu, 2021

Preparation of W-Cu composites by infiltration of w skeletons review
Matějíček, Jiří
2021 - English
Tungsten-copper composites feature high corrosion and erosion resistance, very good thermal and electrical conductivity, low thermal expansion and good mechanical properties. They are used in a variety of demanding applications, such as arc-resistant electrodes, high voltage electrical contacts, heat sinks for integrated circuits, etc. They are also foreseen for use in plasma-facing components of fusion reactors, e.g. as a transition layer between the (refractory) plasma-facing tungsten and the (highly conductive) copper-based cooling structure. In general, high density and good bonding of the tungsten and copper phases is desired. Molten copper infiltration into tungsten preforms is among the prospective fabrication technologies - the structure and properties of the resultant composites are dependent on the specific technological parameters. In this paper, the preparation of W-Cu composites by infiltration of W skeletons is reviewed and attention is paid to the influence of these particular parameters: infiltration temperature, time and atmosphere, tungsten preform porosity, orientation and chemistry (presence or absence of other elements). Optimum parameter combinations for achieving high density and proper bonding of copper and tungsten are identified. Keywords: Composites; Copper; Molten copper infiltration; Tungsten Available at various institutes of the ASCR
Preparation of W-Cu composites by infiltration of w skeletons review

Tungsten-copper composites feature high corrosion and erosion resistance, very good thermal and electrical conductivity, low thermal expansion and good mechanical properties. They are used in a ...

Matějíček, Jiří
Ústav fyziky plazmatu, 2021

High temperature corrosion behaviour of nicr-based coatings applied by twin wire arc spray technology
Lencová, K.; Vostřák, M.; Naďová, J.; Lukáč, František; Mušálek, Radek
2021 - English
High temperature corrosion is a serious problem related to the combustion of heavy oils with high vanadium contents. Protective overlay coatings are used to allow functioning of engineering components under extreme conditions and provide corrosion resistance to extend the component life. This article is concerned with the high temperature corrosion behaviour of two protective NiCr-based coatings and bare structural steel 1.4959 (W.nr.) in a molten salt environment of 40% Na2SO4 and 60% V2O5 at 750 °C under cyclic condition. NiCr and NiCrMoNbTa coating was deposited on steel 1.4903 (W.nr.) by Twin wire arc spray technology (TWAS). To establish the kinetics of corrosion, the thermogravimetric technique was used. The X-ray diffraction (XRD), scanning electron microscope (SEM) and energy dispersive spectroscopy (EDS) techniques were used to analyse the corrosion products and determine the corrosion mechanism. The hot corrosion resistance of both coatings was better than bare steel samples. The NiCrMoNbTa coating showed better corrosion behaviour than the NiCr coating. However, also the NiCr coating provides sufficient protection to the substrate material. Keywords: Heavy oils; High temperature corrosion; NiCr; NiCr-based coating; NiCrMoNbTa; Twin Wire Arc Spray; Vanadium Available at various institutes of the ASCR
High temperature corrosion behaviour of nicr-based coatings applied by twin wire arc spray technology

High temperature corrosion is a serious problem related to the combustion of heavy oils with high vanadium contents. Protective overlay coatings are used to allow functioning of engineering components ...

Lencová, K.; Vostřák, M.; Naďová, J.; Lukáč, František; Mušálek, Radek
Ústav fyziky plazmatu, 2021

Microstructure and microhardness evaluation for NiCrAlY materials manufactured by spark plasma sintering and plasma spraying
Hulka, Iosif; Mušálek, Radek; Lukáč, František; Klečka, Jakub; Chráska, Tomáš
2020 - English
NiCrAlY deposited by different thermal spraying methods is commonly used as the bond coat material in thermal barrier coatings (TBCs). In the present study, two experimental coatings were deposited by hybrid water stabilized plasma (WSP-H) and radio frequency inductively coupled plasma (RF-ICP) using the same feedstock powder. Spark plasma sintering (SPS) was used to manufacture a compact NiCrAlY from the same feedstock powder as a reference material. Microstructure, internal oxidation, phase characterization and quantification of the mechanical behaviour in terms of microhardness were studied. The investigations clearly showed microstructural and mechanical differences between the NiCrAlY samples manufactured by different plasma technologies. The results confirmed that SPS and RF-ICP provide dense structures with no oxides due to the fabrication under protective atmosphere and similar mechanical properties. Thus, RF-ICP may be used for deposition of very dense coatings with microstructure and hardness comparable to compacted materials prepared by SPS. Keywords: Microhardness; Microstructure; NiCrAlY; Plasma spraying; Spark plasma sintering Available at various institutes of the ASCR
Microstructure and microhardness evaluation for NiCrAlY materials manufactured by spark plasma sintering and plasma spraying

NiCrAlY deposited by different thermal spraying methods is commonly used as the bond coat material in thermal barrier coatings (TBCs). In the present study, two experimental coatings were deposited by ...

Hulka, Iosif; Mušálek, Radek; Lukáč, František; Klečka, Jakub; Chráska, Tomáš
Ústav fyziky plazmatu, 2020

Tungsten-steel and tungsten-chromium composites prepared by RF plasma spraying
Matějíček, Jiří; Klečka, Jakub; Čížek, Jan; Veverka, Jakub; Vilémová, Monika; Chráska, Tomáš; Ganesh, V.
2020 - English
For future fusion reactors, materials able to withstand harsh environments are needed. In particular, this concerns the plasma-facing components which are foreseen to consist of tungsten based plasma-facing armor and structural and cooling part made of steel. Currently, joining of these materials presents a significant challenge. The stress concentration at their interface, which arises due to thermal exposure and the difference in thermal and mechanical properties, can be reduced by composite/graded interlayers. Plasma spraying is among the prospective technologies for their preparation. In this work, tungsten-steel and tungsten-chromium composites were prepared by radio-frequency inductively coupled plasma (RF-ICP) spraying. Initial optimization of the spraying process for pure materials as well as their mixtures was carried out. Basic characterization of the layers for their structure, porosity and composition is presented. Keywords: tungsten; composites; RF plasma spraying Fulltext is available at external website.
Tungsten-steel and tungsten-chromium composites prepared by RF plasma spraying

For future fusion reactors, materials able to withstand harsh environments are needed. In particular, this concerns the plasma-facing components which are foreseen to consist of tungsten based ...

Matějíček, Jiří; Klečka, Jakub; Čížek, Jan; Veverka, Jakub; Vilémová, Monika; Chráska, Tomáš; Ganesh, V.
Ústav fyziky plazmatu, 2020

Design of experimental device for testing of subcooled flow boilling
Gleitz, M.; Zacha, P.; Entler, Slavomír; Syblík, J.
2020 - English
The article presents the principle and function of the Hypervapotron and the current work progress on the realisation of the experimental loop. Hypervapotron is a heat exchanger operating in a two-phase flow regime, in which the latent heat of the water/steam phase transformation is used, which enables the transfer of large heat fluxes (up to tens of MW/m(2)). For this reason, it appears to be very promising for use in fusion reactors. The article describes the steps leading to the final design of the experimental loop selection of suitable mesh parameters in the Star-CCM+ code, geometry and used materials of the single elements of the heating system using electromagnetic induction. The effort of the experimental loop and the flow study in the Hypervapotron in general, is dimensional and material optimization of the geometry is suitable for a wide range of applications for which the benefits of subcooled boiling and Hypervapotron geometry can be applied. Keywords: Hypervapotron; Star-CCM; Fusion; Subcooled boiling; Induction heating Fulltext is available at external website.
Design of experimental device for testing of subcooled flow boilling

The article presents the principle and function of the Hypervapotron and the current work progress on the realisation of the experimental loop. Hypervapotron is a heat exchanger operating in a ...

Gleitz, M.; Zacha, P.; Entler, Slavomír; Syblík, J.
Ústav fyziky plazmatu, 2020

High temperature corrosion studies of HVOF sprayed coatings in molten sulphate salts environment
Lencová, K.; Česánek, Z.; Houdková, Š.; Lukáč, František; Mušálek, Radek
2019 - English
The generally applied requirements on lowering of emission production in the field of power industry have led, among others, into the application of low-emission combustion process of coal fired power plants. Besides the emissions reduction, this process has led to an increase of boilers parts corrosion degradation due to the reducing atmosphere in low-emission boilers, responsible for sulphide corrosion and molten salt attack. In such environment, the protection of the exposed surfaces gains importance. Among others, the thermal spraying technology can offer a suitable way of surface corrosion protection. In the present work, the high temperature corrosion behaviour of CoCrAlYTaCSi and Cr3C2-25%NiCr High Pressure/High Velocity Oxygen Fuel (HP/HVOF) sprayed coatings is evaluated and compared to the behaviour of bare structural steel (SPT360) substrate. The specimens were exposed to a molten salt environment, i. e., 12% Na2SO4 + 82% Fe2(SO4)3 at 690 °C under cyclic condition, simulating the working environment in low-emission boilers of coal-fired power plants. The thermogravimetric method was used to establish the kinetics of corrosion. X-ray diffraction (XRD), scanning electron microscope (SEM) and energy dispersive spectroscopy (EDS) techniques were used to analyse the corrosion products and determine the corrosion mechanism. The thermogravimetric measurement shows high oxidation rate of SPT360 steel. Cr3C2-25%NiCr coating provides slightly better performance compared to CoCrAlYTaCSi coating. Based on the obtained results, both coatings were found to have higher corrosion resistance than the SPT360 steel substrate, offering a sufficient surface protection in a given environment. Keywords: Coal fired boilers; CoCrAlYTaCSi; Cr3C2-25%NiCr; High temperature corrosion; hvof; Low-emission boilers; Thermal spraying Fulltext is available at external website.
High temperature corrosion studies of HVOF sprayed coatings in molten sulphate salts environment

The generally applied requirements on lowering of emission production in the field of power industry have led, among others, into the application of low-emission combustion process of coal fired power ...

Lencová, K.; Česánek, Z.; Houdková, Š.; Lukáč, František; Mušálek, Radek
Ústav fyziky plazmatu, 2019

Fluctuations in the scrape-off layer and edge plasma of the COMPASS tokamak
Seidl, Jakub; Jiráková, Kateřina; Adámek, Jiří; Grover, Ondřej; Horáček, Jan; Hron, Martin; Vondráček, Petr
2018 - English
We have identified two distinct types of turbulent fluctuations in COMPASS plasmas, the high-frequency edge oscillations and low-frequency SOL blobs. The transition region is localized in the near SOL, where both types spatially overlap and interact and the radial particle transport gradually transfers from high to low frequencies. Even though skewness of isat fluctuations is positive even inside LCFS, distinguishable Gamma-distributed PDF, formed by the low-frequency fluctuations, arises in the near SOL. This supports, together with turbulence spreading rate being positive in the near SOL but negative in the edge, the picture presented in [3] that most of the fluctuations that form a positive skewness in the edge region disappear around LCFS and new blobs are formed in the near SOL. Further, we cannot confirm the assumption that the blobs are generated randomly according to a Poisson process. Oscillations of all measured quantities, incl. radial particle flux, in the near SOL are peaked around ∼13 kHz. This seems to correspond to a poloidally rotating structure with a rather large poloidal wave-length ∼ 15 − 20 cm, that at least partly modulates blob generation. Nevertheless, we note that time separation of blobs becomes more random further in the SOL, possibly due to differences in their individual propagation. These observations hold for diverted plasmas, but the situation may be different in limited low-elongation plasmas where the radius of zero skewness was observed to be shifted significantly (several cm) inwards, compared to diverted configuration, and Gamma-like PDF is detected even inside the LCFS. Study of these plasmas is ongoing. Keywords: plasma; tokamak; turbulence Fulltext is available at external website.
Fluctuations in the scrape-off layer and edge plasma of the COMPASS tokamak

We have identified two distinct types of turbulent fluctuations in COMPASS plasmas, the high-frequency edge oscillations and low-frequency SOL blobs. The transition region is localized in the near ...

Seidl, Jakub; Jiráková, Kateřina; Adámek, Jiří; Grover, Ondřej; Horáček, Jan; Hron, Martin; Vondráček, Petr
Ústav fyziky plazmatu, 2018

About project

NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web

Send your suggestions and comments to nusl@techlib.cz

Provider

http://www.techlib.cz

Facebook

Other bases