Počet nalezených dokumentů: 2199
Publikováno od do

Learning Body Models:From Humans to Humanoids
Hoffmann, Matěj
2021 - anglický
Humans and animals excel in combining information from multiple sensory modalities, control-ling their complex bodies, adapting to growth, failures, or using tools. These capabilities are alsohighly desirable in robots. They are displayed by machines to some extent. Yet, the artificial crea-tures are lagging behind. The key foundation is an internal representation of the body that theagent—human, animal, or robot—has developed. The mechanisms of operation of body modelsin the brain are largely unknown and even less is known about how they are constructed fromexperience after birth. In collaboration with developmental psychologists, we conducted targetedexperiments to understand how infants acquire first “sensorimotor body knowledge”. These ex-periments inform our work in which we construct embodied computational models on humanoidrobots that address the mechanisms behind learning, adaptation, and operation of multimodalbody representations. At the same time, we assess which of the features of the “body in the brain”should be transferred to robots to give rise to more adaptive and resilient, self-calibrating ma-chines. We extend traditional robot kinematic calibration focusing on self-contained approacheswhere no external metrology is needed: self-contact and self-observation. Problem formulationallowing to combine several ways of closing the kinematic chain simultaneously is presented,along with a calibration toolbox and experimental validation on several robot platforms. Finally,next to models of the body itself, we study peripersonal space—the space immediately surround-ing the body. Again, embodied computational models are developed and subsequently, the pos-sibility of turning these biologically inspired representations into safe human-robot collaborationis studied. Plné texty jsou dostupné v digitálním repozitáři ČVUT.
Learning Body Models:From Humans to Humanoids

Humans and animals excel in combining information from multiple sensory modalities, control-ling their complex bodies, adapting to growth, failures, or using tools. These capabilities are alsohighly ...

Hoffmann, Matěj
České vysoké učení technické v Praze, 2021

FIRE-PROTECTION WITH ALKALI-ACTIVATED CEMENT BINDER
Šejna J.; Šmilauer V.; Šulc S.; Wald F.; Reiterman P.
2021 - anglický
Fire resistance of unprotected steel structures is very low and steel elements must be protected from fire. One possibility is to create a protective layer of a cement-based material. Most types of cement have a low resistance to high temperatures, reducing mechanical properties. In flammability tests, cement activated with alkaline compounds showed better properties compared to conventional types of cement. This paper represents the determination of the properties of two H-Cement mortars with experlite or fireclay sand. Experiments carried out in a small kiln simulating a 1D load showed differences between elements in terms of heat transfer to the tested elements. The calculation model created to predict the course of the experiments has been validated and the unknown properties of the material have been calculated based on the data collected. The samples were tested in a small fire furnace. Finally, the thermal conductivity pattern was determined depending on the temperature. Klíčová slova: fire safety; alkali-activated cement; fire-protection; modelling; material properties Plné texty jsou dostupné v digitálním repozitáři ČVUT.
FIRE-PROTECTION WITH ALKALI-ACTIVATED CEMENT BINDER

Fire resistance of unprotected steel structures is very low and steel elements must be protected from fire. One possibility is to create a protective layer of a cement-based material. Most types of ...

Šejna J.; Šmilauer V.; Šulc S.; Wald F.; Reiterman P.
České vysoké učení technické v Praze, 2021

Potential Biomarkers From Positive Definite 4th Order Tensors In Hardi
Kaushik S.; Kybic J.; Bansal A.; Tsegey T.; Slovak J.
2021 - anglický
In this paper, we provide a framework to evaluate new scalar quantities for higher order tensors (HOT) appearing in high angular resolution diffusion imaging (HARDI). These can potentially serve as biomarkers. It involves flattening of HOTs and extraction of the diagonal D-components. Experiments performed in the 4th order case reveal that D-components encode geometric information unlike the isometric 6D 2nd order Voigt form. The existing invariants obtained from the Voigt form are considered for comparison. We also notice that D-components can be useful in segmentation of white matter structures in crossing regions and classification. Results on phantom and the synthetic dataset support the conclusions Klíčová slova: Biomarkers; HARDI; Anisotropy Plné texty jsou dostupné v digitálním repozitáři ČVUT.
Potential Biomarkers From Positive Definite 4th Order Tensors In Hardi

In this paper, we provide a framework to evaluate new scalar quantities for higher order tensors (HOT) appearing in high angular resolution diffusion imaging (HARDI). These can potentially serve as ...

Kaushik S.; Kybic J.; Bansal A.; Tsegey T.; Slovak J.
České vysoké učení technické v Praze, 2021

Key criteria for the short-circuit capability of IGBTs
Treek van, V.; Schulze, H.-J.; Baburske, R.; Hille, F.; Niedernostheide, F.-J.; Pfirsch, F.
2021 - anglický
Short-circuit behavior and capability are investigated and optimized during IGBT development. Thereby, knowledge about destruction and high-frequency short-circuit oscillation mechanisms is needed. For the thermal destruction mechanism, filaments are formed shortly before destruction during the thermal runaway itself, whereas for the electrical destruction mechanism strong current filaments are formed by an electrical mechanism, before the self-heating in the filaments leads to a thermal runaway. At low collector-emitter voltages, weak non-destructive filaments exist for a large current range. For both the filament formation and short-circuit oscillations (SCOs), an electric-field peak in the field-stop layer and a quasi-plasma layer beneath the MOS cells are mandatory. For SCOs, which are caused by a periodic storage and release of charge carriers inside the device, additionally, a weak electrical field at the beginning of the drift zone is necessary. Weak, non-destructive filaments and SCOs are likely to occur simultaneously. An increase of the bipolar current gain reduces the operating area with SCOs and increases the electrical short-circuit capability. A simultaneous reduction of the thermal short-circuit robustness can be avoided by advanced p-emitter concepts or (over-)compensated by an improved thermal setup. Plné texty jsou dostupné v digitálním repozitáři ČVUT.
Key criteria for the short-circuit capability of IGBTs

Short-circuit behavior and capability are investigated and optimized during IGBT development. Thereby, knowledge about destruction and high-frequency short-circuit oscillation mechanisms is needed. ...

Treek van, V.; Schulze, H.-J.; Baburske, R.; Hille, F.; Niedernostheide, F.-J.; Pfirsch, F.
České vysoké učení technické v Praze, 2021

A Simulation study of 6.5kV Gate Controlled Diode
Gurunath Vishwamitra Yoganath; Quang Tien Tran; Eckel, Hans-Günter
2021 - anglický
Gate Controlled Diode (GCD) with micro-pattern trench structure, allows charge carrier modulation at the anode region by gate control. This is utilized to operate the diode at low saturation mode and desaturate the diode before IGBT turn-on, to achieve a better trade-off. The paper demonstrates the concept of a silicon bi-polar power diode with micro-pattern trench gate, for 6.5 kV applications. Thereby, a detailed study of switching behaviour and the switching pattern were conducted, so as to reduce the overall switching loss and improve the efficiency. The efficiency also depends on the robustness of the diode, several issues concerning the reverse recovery robustness of the Gate controlled diode were investigated. Plné texty jsou dostupné v digitálním repozitáři ČVUT.
A Simulation study of 6.5kV Gate Controlled Diode

Gate Controlled Diode (GCD) with micro-pattern trench structure, allows charge carrier modulation at the anode region by gate control. This is utilized to operate the diode at low ...

Gurunath Vishwamitra Yoganath; Quang Tien Tran; Eckel, Hans-Günter
České vysoké učení technické v Praze, 2021

Concentration and size distribution of solid particle emissions from oxy-fuel combustion of biomass in a fluidized bed
Červený O.; Vybíral P.; Hemerka J.; Mareš L.
2021 - anglický
The presented work summaries results of measurement of solid particle emissions from experimental 30 kW combustion unit, which has been used for research of oxy fuel combustion of biomass in fluidized bed. Klíčová slova: solid particle emissions; oxy-fuel combustion of biomass in fluidized bed; impactor; particle size distribution Plné texty jsou dostupné v digitálním repozitáři ČVUT.
Concentration and size distribution of solid particle emissions from oxy-fuel combustion of biomass in a fluidized bed

The presented work summaries results of measurement of solid particle emissions from experimental 30 kW combustion unit, which has been used for research of oxy fuel combustion of biomass in fluidized ...

Červený O.; Vybíral P.; Hemerka J.; Mareš L.
České vysoké učení technické v Praze, 2021

Methodology of Controlled Crack Introduction in Cementitious Materials
Schreiberová H.; Fládr J.; Trtík T.; Chylík R.; Kohoutková A.
2021 - anglický
Crack formation is a common and generally inevitable phenomenon in the field of concrete structures. On the other hand, the ever-increasing demand for sustainable construction, thus the structures durability, has led researchers to propose and investigate various crack-sealing methods. This study deals with the key aspect of these investigations – the in-vitro creation of cracks. A large number of the conducted studies have been carried out on artificially cracked specimens, and various methodologies of the controlled crack introduction were presented; however, no specific method was clearly preferred. In this paper, several approaches to the crack introduction are applied: cracking through compressive loading, tensile loading, and 3-point bending. Further, different types of specimens are presented: plain concrete, reinforced with short and long steel fibers, and reinforced with steel rod. The achievable crack characteristics, such as widths or its stability over time, are evaluated and compared. This study thus provides valuable overlook of the possible approaches to the controlled crack creation and points out their potential and limitations. Based on the comparisons presented in this paper, the long steel fiber reinforced concrete specimens subjected to 3-point bending are identified as the most appropriate method of crack induction. Klíčová slova: concrete; controlled cracking; self-healing; non-destructive testing Plné texty jsou dostupné v digitálním repozitáři ČVUT.
Methodology of Controlled Crack Introduction in Cementitious Materials

Crack formation is a common and generally inevitable phenomenon in the field of concrete structures. On the other hand, the ever-increasing demand for sustainable construction, thus the structures ...

Schreiberová H.; Fládr J.; Trtík T.; Chylík R.; Kohoutková A.
České vysoké učení technické v Praze, 2021

Optimization of Tool Axis Orientations in Multi-Axis Toolpaths to Increase Surface Quality and Productivity
Stejskal M.; Vavruška P.; Zeman P.; Lomička J.
2021 - anglický
This paper deals with a method to optimize tool axis orientations in multi-axis milling toolpaths. The method is based on calculation of the actual cutting diameter and the cutting speed during the toolpath. Subsequently, the NC code is processed by the interpolator with a machine tool kinematic model. The result is a visualization of the actual cutting speed and the real feed-rate on the toolpath. Based on these results, the vectors used to orient the tool axis along the toolpath can be effectively set up in several iterations. The toolpath are optimized to achieve a more constant cutting speedwhich lead to an improvement in surface quality and increase in productivity. Klíčová slova: Milling Surface quality Computer aided manufacturing Cutting speed Tool axis vector Plné texty jsou dostupné v digitálním repozitáři ČVUT.
Optimization of Tool Axis Orientations in Multi-Axis Toolpaths to Increase Surface Quality and Productivity

This paper deals with a method to optimize tool axis orientations in multi-axis milling toolpaths. The method is based on calculation of the actual cutting diameter and the cutting speed during the ...

Stejskal M.; Vavruška P.; Zeman P.; Lomička J.
České vysoké učení technické v Praze, 2021

TCAD Simulation of the Bipolar Degradation in SiC MOSFET Power Devices
Lachichi, A.; Mawby, P.
2021 - anglický
TCAD Simulation of the Bipolar Degradation in SiC MOSFET Power Devices A. Lachichi and P. Mawby, School of Engineering University of Warwick. Coventry, United Kingdom Abstract Reliability and performance of SiC high power devices are still limited by inherent SiC material defects despite tremendous progress made to reduce the density of these defects. The bipolar degradation remains a major challenge for developing high voltage SiC power devices. It is mainly due to the presence of Shockley-type stacking sequence faults (SFs) within the hexagonal SiC structure lattice, creating 3C-like SiC regions embedded within the main 4H-SiC structure. In this paper, we present a two dimensional numerical model of 4H-SiC power MOSFET device in which the drift region of the device is formed by a 4H-3C-4H heterojunction to account for the bipolar degradation. TCAD simulation results showed that the 3C- nano-layer creates a high resistive layer, effectively preventing the current flows across it, hence reducing the total active area of the device. Plné texty jsou dostupné v digitálním repozitáři ČVUT.
TCAD Simulation of the Bipolar Degradation in SiC MOSFET Power Devices

TCAD Simulation of the Bipolar Degradation in SiC MOSFET Power Devices A. Lachichi and P. Mawby, School of Engineering University of Warwick. Coventry, United Kingdom Abstract ...

Lachichi, A.; Mawby, P.
České vysoké učení technické v Praze, 2021

Parylene as Coating for Power Semiconductor Devices
Clausner, S.; Hanf, M.; Meier, M. R.; Schweigart, H.; Kaminski, N.
2021 - anglický
The introduction of wide band gap semiconductor devices leads to smaller package sizes, higher power densities and higher switching frequencies, which is advantageous compared to the power electronics based on the conventional silicon devices. However, due to the small insulation distances and the limited temperature range of available package materials, it is not possible to exploit these advantages completely. In this study, the properties of Parylene coatings as passivation layers in power semiconductor devices is investigated. The material would be particularly advantageous for double-side cooled power modules because it can fill the small gaps between different conductive layers, which is not possible with conventional packaging technologies. Parylene is promising to provide an excellent insulation performance even in these areas and exhibits a good temperature stability. Furthermore, this polymer acts as a barrier for humidity, dirt and corrosive gasses. Two types of Parylene were tested using the High-Voltage, High Humidity, High Temperature Reverse Bias (HV-H³TRB) test on substrate level and the better Parylene type also on automotive three-phase modules. The results are encouraging, although the performance strongly depends on the Parylene type and although a sensitivity to the respecive surface condition to be coated became apparent. Plné texty jsou dostupné v digitálním repozitáři ČVUT.
Parylene as Coating for Power Semiconductor Devices

The introduction of wide band gap semiconductor devices leads to smaller package sizes, higher power densities and higher switching frequencies, which is advantageous compared to the power ...

Clausner, S.; Hanf, M.; Meier, M. R.; Schweigart, H.; Kaminski, N.
České vysoké učení technické v Praze, 2021

O službě

NUŠL poskytuje centrální přístup k informacím o šedé literatuře vznikající v ČR v oblastech vědy, výzkumu a vzdělávání. Více informací o šedé literatuře a NUŠL najdete na webu služby.

Vaše náměty a připomínky posílejte na email nusl@techlib.cz

Provozovatel

http://www.techlib.cz

Facebook

Zahraniční báze