Yes (75)
Number of found documents:
75
Published from
to
Dynamics of surface water quality changes in model headwater areas of the Czech Republic
Fraindová, K.; Matoušková, M.; Kliment, Z.; Vlček, Lukáš; Vlach, V.; Šajnarová, L.
2023 - English
River headwaters have a high environmental value. Unfortunately, the biogeochemical processes in headwaters in context of different rainfall-runoff conditions and specific land cover have not been fully examined. This study focuses on changes in correlations of 16 biogeochemical parameters related to different types of rainfall-runoff events and land cover condition for eight headwater catchments in Central Europe. Multiple methods as linear regression, Spearman rank correlation, Principal Components Analysis and C/Q hysteresis loops revealed main relationships. Presence of peatlands and waterlogged spruce forests had decisive influence on the biogeochemistry (mainly for CODMn, humins, Fe, P-PO43− TP, and N-NO3−). The strongest positive correlation of organic matter (CODMn) and Fe is represented in a catchment with the largest area of damaged forest (70%), but with a smaller proportion of wetlands (8%). High flow rates influence the release of greater amounts of organic matter and N-NO3−.
Keywords:
headwater areas; organic matter; waterlogged areas; peatbogs; raifall-runoff events; water quality; electric conductivity
Fulltext is available at external website.
Dynamics of surface water quality changes in model headwater areas of the Czech Republic
River headwaters have a high environmental value. Unfortunately, the biogeochemical processes in headwaters in context of different rainfall-runoff conditions and specific land cover have not been ...
Dynamics of dissolved organic carbon in surface water during extreme rainfall-runoff events
Matoušková, M.; Fraindová, K.; Bejčková, M.; Kliment, Z.; Vlach, V.; Vlček, Lukáš
2023 - English
The release of a greater amount of natural organic matter (NOM) within climate change is registered in many catchments with peatbog areas. The aim of our research is to study the dynamics of releasing dissolved organic carbon (DOC) into surface water in headwater areas with peatbogs. DOC concentrations are analysed in relation to extreme rainfall-runoff (R-R) events and according to the hydrological preconditions of the basin. These preconditions are described using selected hydroclimatic variables (14 days before the R-R event). The source data comes from stations of the Faculty of Science, Charles University, and the Czech Hydrometeorological Institute. For the evaluation of relations and processes, the Principal component analysis (PCA), hysteresis loops or Pearson correlation coefficient was used. The lag time of DOCmax for Qmax, the dependence of DOCmax and groundwater levels were studied. The influence of flow rate on the decline and ascent phases of DOC\nconcentrations by hysteresis loops and the influence of the number of partial flow maximums on the amount of transported DOC during the R-R event was analysed. Our first results show that great influence on the dynamic of DOC concentration in surface water has the change in groundwater-levels in the peatbog and the outflow amount during the R-R event. The hydroclimatic preconditions of the basin have also a significant influence on the DOC release. Changes in concentrations during R-R events also occurred for other compounds that were studied additionally. Particularly significant was the increase in metals (mainly Fe, Al, Mn) and base cation (K) and decrease in nitrate nitrogen.
Keywords:
natural organic matter; dissolved organic carbon; peatbog; surface water
Fulltext is available at external website.
Dynamics of dissolved organic carbon in surface water during extreme rainfall-runoff events
The release of a greater amount of natural organic matter (NOM) within climate change is registered in many catchments with peatbog areas. The aim of our research is to study the dynamics of releasing ...
Summary of the Liquid-Gas Ejector Hydraulic Behavior - Theory and Practice
Gebouský, Ondřej; Haidl, Jan
2023 - English
Liquid-gas ejectors (LGEs) are fascinating devices that use the kinetic energy of the liquid jet to entrain and eventually compress the gas. LGEs find applications in both industry and everyday life, e.g., as sprayers. However, a complex and reliable method for LGE design was not available in the open literature until recently. This contribution follows up on our recent works about the hydraulic behavior of LGE with undisturbed and destabilized liquid jets. This paper aims to summarize the device’s complicated hydraulics and characterize its optimal design for three industrially relevant applications - (a) LGE as the vacuum pump, (b) LGE as the gas purification equipment, and (c) LGE as the gas distributor for bioreactors.
Keywords:
liquid-gas ejector; jet pump; design method
Available in digital repository of the ASCR
Summary of the Liquid-Gas Ejector Hydraulic Behavior - Theory and Practice
Liquid-gas ejectors (LGEs) are fascinating devices that use the kinetic energy of the liquid jet to entrain and eventually compress the gas. LGEs find applications in both industry and everyday life, ...
Correlation between the onset of beadless character of nanofibrous webs and rheological characteristics of electrospun polymer solutions
Zelenková, Jana; Peer, Petra; Filip, Petr
2021 - English
An overwhelming majority of applications of nanofibrous webs requires sufficiently smooth character of nanofibres surface. This character is apart other parameters strongly influenced by a concentration of chosen polymeric material in the solvents. Qualitative attributes roughly depend on the prepared concentration, specifically whether it belongs to one of the four basic regions: dilute, semidilute unentangled, semidilute entangled and concentrated. A concentration separating the latter two regions is often taken as a zero-th approximation indicating an onset of beadless nanofibrous webs. The present contribution uses as a more precise indicator behaviour of so-called phase angle relating viscous and elastic moduli, in other words mutual participation of viscous and elastic components. To this aim three frequently used polymers were used: copolymer of poly(vinylidene fluoride) and hexafluoropropylene (PVDF-co-HFP), poly(ethylene oxide) (PEO) and poly(vinyl butyral) (PVB). For materials exhibiting first a constant behaviour or moderate decrease in a phase angle for lower concentrations, an approximation of the starting concentration is given by a concentration value where a phase angle curve starts to decrease, apparently reflecting a more progressive viscoelastic nature. As shown, such approximation provides relatively very good approximation enabling to eliminate a traditional trial-and-error method.
Keywords:
nanofibres; beadless morphology; PVDF-co-HFP; polymer concentration; rheology
Available in digital repository of the ASCR
Correlation between the onset of beadless character of nanofibrous webs and rheological characteristics of electrospun polymer solutions
An overwhelming majority of applications of nanofibrous webs requires sufficiently smooth character of nanofibres surface. This character is apart other parameters strongly influenced by a ...
The importance of the radiation balance for water retention of the landscape
Kofroňová, Jitka
2018 - English
As part of the radiation balance, longwave radiation is one of the factors needed to estimate potential evapotranspiration (PET). Since the longwave radiation balance is rarely measured, many computational methods have been designed. In this study, we report on the difference between the observed longwave radiation balance and modelling results obtained using the two main procedures outlined in Manuals 24 and 56 of the FAO. The performance of these equations was evaluated in the warmer months (April to October) over eight years at the Liz experimental catchment in the Bohemian Forest (Czech Republic). The coefficients of both methods were also calibrated based on local conditions. Four commonly used methods were used to calculate the PET (Penman-Monteith, Pristley and Taylor, Kimberley-Penman, Thom and Oliver). The use of default coefficient values gave errors of 40 100 mm and 0 20 mm for the seasonal PET estimates for FAO56 and FAO24, respectively (the PET was usually overestimated). Parameter calibration decreased the FAO56 error to less than 20 mm per season (FAO24 remained unaffected by the calibration). The FAO56 approach with calibrated coefficients proved to be more suitable for estimation of the longwave radiation balance.
Keywords:
water retention; radiation balance; potential evapotranspiration (PET)
Available in digital repository of the ASCR
The importance of the radiation balance for water retention of the landscape
As part of the radiation balance, longwave radiation is one of the factors needed to estimate potential evapotranspiration (PET). Since the longwave radiation balance is rarely measured, many ...
Evaluation of the turbulent kinetic dissipation rate in an agitated vessel
Kysela, Bohuš; Konfršt, Jiří; Chára, Zdeněk; Sulc, R.; Jašíková, D.
2017 - English
The design of agitated tanks depends on operating conditions and processes for that are used for. An important parameter for the scale-up modelling is the dissipation rate of the turbulent kinetic energy. The dissipation rate is commonly assumed to be a function of the impeller power input. But this approach gives no information about distribution of the dissipation rate inside the agitated volume. In this paper the distributions of the dissipation rate inside the agitated vessels are estimated by evaluations of the CFD (Computational Fluid Dynamics). The results obtained from RANS (Reynolds Averaged Navier-Stokes equations) k-epsilon turbulent model and LES (Large Eddy Simulations) with Smagorinsky SGS (Sub Grid Scale) model are compared. The agitated vessels with standard geometry equipped with four baffles and stirred by either a standard Rushton turbine or a high shear impeller were investigated. The results are compared with mean dissipation rate estimated from the total impeller power input.
Keywords:
flow; large-eddy simulation
Fulltext is available at external website.
Evaluation of the turbulent kinetic dissipation rate in an agitated vessel
The design of agitated tanks depends on operating conditions and processes for that are used for. An important parameter for the scale-up modelling is the dissipation rate of the turbulent kinetic ...
Local velocity scaling in T400 vessel agitated by Rushton turbine in a fully turbulent region
Šulc, R.; Ditl, P.; Fořt, I.; Jašíková, D.; Kotek, M.; Kopecký, V.; Kysela, Bohuš
2017 - English
The hydrodynamics and flow field were measured in an agitated vessel using 2-D Time Resolved Particle Image Velocimetry (2-D TR PIV). The experiments were carried out in a fully baffled cylindrical flat bottom vessel 400 mm in inner diameter agitated by a Rushton turbine 133 mm in diameter. The velocity fields were measured in the zone in upward flow to the impeller for impeller rotation speeds from 300 rpm to 850 rpm and three liquids of different viscosities (i.e. (i) distilled water, ii) a 28% vol. aqueous solution of glycol, and iii) a 43% vol. aqueous solution of glycol), corresponding to the impeller Reynolds number in the range 50 000 < Re < 189 000. This Re range secures the fully-developed turbulent flow of agitated liquid. In accordance with the theory of mixing, the dimensionless mean and fluctuation velocities in the measured directions were found to be constant and independent of the impeller Reynolds number. On the basis of the test results the spatial distributions of dimensionless velocities were calculated. The axial turbulence intensity was found to be in the majority in the range from 0.388 to 0.540, which corresponds to the high level of turbulence intensity.
Keywords:
agitated vessel; Rushton turbine; PIV
Fulltext is available at external website.
Local velocity scaling in T400 vessel agitated by Rushton turbine in a fully turbulent region
The hydrodynamics and flow field were measured in an agitated vessel using 2-D Time Resolved Particle Image Velocimetry (2-D TR PIV). The experiments were carried out in a fully baffled cylindrical ...
Simulation of collagen solution flow in rectangular capillary
Kysela, Bohuš; Skočilas, J.; Zitny, R.; Stancl, J.; Houska, M.; Landfeld, A.
2017 - English
The viscoelastic properties of foods and polymers can be evaluated from flow of the material in capillary with specified dimension and shape. The extrusion rheometer equipped by capillary with rectangular cross-section was used for determination of the rheological behaviour of water collagen solution. The measurements of the axial profiles in longitudinal direction of the total stresses at capillary wall were performed for various shear rates. The linear viscoelastic model of Oldroyd B type: White-Metzner model was used for simulation of fluid flow in OpenFOAM software package. The simulations describe the effect of relaxation time on wall total stress in convergent-divergent capillary.
Keywords:
collagen; viscoelastic model; convergent-divergent capillary
Fulltext is available at external website.
Simulation of collagen solution flow in rectangular capillary
The viscoelastic properties of foods and polymers can be evaluated from flow of the material in capillary with specified dimension and shape. The extrusion rheometer equipped by capillary with ...
The minimum record time for PIV measurement in a vessel agitated by a Rushton turbine
Šulc, R.; Ditl, P.; Fořt, I.; Jašíková, D.; Kotek, M.; Kopecký, V.; Kysela, Bohuš
2017 - English
In PIV studies published in the literature focusing on the investigation of the flow field in an agitated vessel the record time is ranging from the tenths and the units of seconds. The aim of this work was to determine minimum record time for PIV measurement in a vessel agitated by a Rushton turbine that is necessary to obtain relevant results of velocity field. The velocity fields were measured in a fully baffled cylindrical flat bottom vessel 400 mm in inner diameter agitated by a Rushton turbine 133 mm in diameter using 2-D Time Resolved Particle Image Velocimetry in the impeller Reynolds number range from 50 000 to 189 000. This Re range secures the fully-developed turbulent flow of agitated liquid. Three liquids of different viscosities were used as the agitated liquid. On the basis of the analysis of the radial and axial components of the mean- and fluctuation velocities measured outside the impeller region it was found that dimensionless minimum record time is independent of impeller Reynolds number and is equalled N. t(Rmin) = 103 +/- 19.
Keywords:
agitated vessel; Rushton turbine; PIV; averaging limits
Fulltext is available at external website.
The minimum record time for PIV measurement in a vessel agitated by a Rushton turbine
In PIV studies published in the literature focusing on the investigation of the flow field in an agitated vessel the record time is ranging from the tenths and the units of seconds. The aim of this ...
Multi-functional composites with integrated nanostructured carbon nanotubes based sensing films
Slobodian, P.; Pertegás, S.L.; Schledjewski, R.; Matyáš, J.; Olejník, R.; Říha, Pavel
2016 - English
Carbon nanotubes are exceptional nano-objects with respect to their remarkable properties, holding great potential in new polymeric materials design with unique characteristics. To illustrate it, the conventional glass reinforced epoxy composite is combined with a layer of entangled network of carbon nanotubes deposited on polyurethane non-woven membrane. The prepared nano-composite is studied for their diverse mjulti-functional applications involving extension and compression strain sensing composite, remoulding by means of resistance Joule heating and radiating as a planar micro strip antenna operating at frequencies of 2MHz up to 4GHz.
Keywords:
epoxy composite; glass fibers; carbon nanotubes; electro-mechanical properties
Fulltext is available at external website.
Multi-functional composites with integrated nanostructured carbon nanotubes based sensing films
Carbon nanotubes are exceptional nano-objects with respect to their remarkable properties, holding great potential in new polymeric materials design with unique characteristics. To illustrate it, the ...
NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web
Send your suggestions and comments to nusl@techlib.cz
Provider
Other bases