Number of found documents: 144
Published from to

Models of AWS Material Functions
Wein, Ondřej; Pěnkavová, Věra
2014 - English
New classes of 4-parameter models of fluidity for the shear-thinning non-Newtonian liquids are introduced, including their local pseudosimilarity representation. The models cover both purely-viscous (PV) and visco-plastic (VP) flow behavior. New 4-parameter model of slipidity (Navier slip coefficient) is introduced, as well as its modification for retarded AWS (slipidity decreasing with rising shear stress) and wall dilatancy (negative slipidity). Their asymptotic behavior, as well as their asymptotic sub-models are identified and prepared for implementation in the software AWSWork. Keywords: visco-plastic materials; purely viscous liquids; pseudosimilarity; material functions Available on request at various institutes of the ASCR
Models of AWS Material Functions

New classes of 4-parameter models of fluidity for the shear-thinning non-Newtonian liquids are introduced, including their local pseudosimilarity representation. The models cover both purely-viscous ...

Wein, Ondřej; Pěnkavová, Věra
Ústav chemických procesů, 2014

12M-IMMEDIATE Research Report: Preparation of Pt on Carbon Black Supported Catalysts
Kaluža, Luděk; Zdražil, Miroslav; Gulková, Daniela; Vít, Zdeněk; Šolcová, Olga; Soukup, Karel; Maixnerová, Lucie
2014 - English
The aim of this work was to elucidate on advanced preparation of Pt/C catalysts from TimCal carbon black and H2PtCl6. The attention was directed to residual content of chloride in the prepared catalysts and scale-up to the amount about 1 gram of final product. The textrual properties of the supports and selected catalyst were studied by nitrogen physisorption. The analytical methods such as instrumental neutron activation analysis (INAA), liquid ion chromatography (LC), and titration with silver nitrates were applied for Cl analysis. Electron probe micro analysis (SEM-EDX), hydrogen chemisorption, temperature programed desorption of hydrogen (TPD) and a simplified determination of ignition temperature in air flow were used for Pt/C catalysts characterization. Keywords: Pt/C catalysts; carbon black; analytical methods Available at various institutes of the ASCR
12M-IMMEDIATE Research Report: Preparation of Pt on Carbon Black Supported Catalysts

The aim of this work was to elucidate on advanced preparation of Pt/C catalysts from TimCal carbon black and H2PtCl6. The attention was directed to residual content of chloride in the prepared ...

Kaluža, Luděk; Zdražil, Miroslav; Gulková, Daniela; Vít, Zdeněk; Šolcová, Olga; Soukup, Karel; Maixnerová, Lucie
Ústav chemických procesů, 2014

Vývoj technologií pilotní přípravy laktamáz a dalších enzymů
Prell, Aleš; Kujan, Petr; Sobotka, Miroslav; Šafář, Hynek
2014 - English
Development and optimization of the production of some enzymes for pharmaceutical industry. Cultivation technology and down-stream processing. Keywords: enzyme production; bacterial production; submerged aerobic cultivation; biotechnology Available at various institutes of the ASCR
Vývoj technologií pilotní přípravy laktamáz a dalších enzymů

Development and optimization of the production of some enzymes for pharmaceutical industry. Cultivation technology and down-stream processing.

Prell, Aleš; Kujan, Petr; Sobotka, Miroslav; Šafář, Hynek
Mikrobiologický ústav, 2014

Rheology of Colloidal Dispersions: Deflocculation of Kaolin Dispersions
Guerreiro, M.I.A.; Růžička, Marek; Pěnkavová, Věra
2013 - English
All inorganic additives in their optimal concentrations proved to be effective at reducing the initial viscosity to 1%. In the case of NaOH two different trends were observed: firstly this additive behaved as a deflocculant agent where, at its optimal range of concentrations, the viscosity of kaolin dispersion reduced to its minimal value, secondly when used at concentrations above its optimal range, sodium hydroxide behaved like a flocculant agent increasing strongly the viscosity of kaolin dispersions. The possible cause was attributed to an excess of Na+ and OH- species in bulk media that promoted the reversible effect. Similar effect was also reported for NaCMC at high and medium molar weight, were the viscosity firstly decreased to a certain concentration of additive and then above that concentration started to increase. Thus low molar weight NaCMC was the most effective among the organic additives since it decreased the viscosity to 10% of initial viscosity. Qualitative evaluation showed that organic additives promoted more stable dispersions, in contrast to poor stability offered by the inorganic additives, with exception of NaOH that provided dispersions with good stability inside of its optimal range. Keywords: kaolin dispersions; yield strss; viscoplastic fluids Available at various institutes of the ASCR
Rheology of Colloidal Dispersions: Deflocculation of Kaolin Dispersions

All inorganic additives in their optimal concentrations proved to be effective at reducing the initial viscosity to 1%. In the case of NaOH two different trends were observed: firstly this additive ...

Guerreiro, M.I.A.; Růžička, Marek; Pěnkavová, Věra
Ústav chemických procesů, 2013

6M-IMMEDIATE Research Report: Preparation of Pt on Carbon Black Supported Catalysts
Kaluža, Luděk; Zdražil, Miroslav; Gulková, Daniela; Vít, Zdeněk; Šolcová, Olga; Soukup, Karel; Maixnerová, Lucie
2013 - English
The purpose of the present work is to elucidate on carbon black materials as a support for high loading of Pt in highly dispersed form. There are three main methodologies described in the .literature for deposition of Pt: i) impregnation of the support with solution of well soluble Pt precursors, ii) deposition of a colloidal form of Pt onto the support, and iii) deposition of Pt onto the supports from microemulsion of Pt precursor with the assistance of surfactant. The Pt containing species are deposited either by spontaneous adsorption or by evaporation of the solvent. The deposited platinum compound is transformed to metallic platinum with some chemical or physical (temperature) treatment. Remainders of the deposited compound other than platinum must be removed from the catalysts (for instance by washing, calcination, etc.). Keywords: elucidate; carbon black materials; platinum Available at various institutes of the ASCR
6M-IMMEDIATE Research Report: Preparation of Pt on Carbon Black Supported Catalysts

The purpose of the present work is to elucidate on carbon black materials as a support for high loading of Pt in highly dispersed form. There are three main methodologies described in the .literature ...

Kaluža, Luděk; Zdražil, Miroslav; Gulková, Daniela; Vít, Zdeněk; Šolcová, Olga; Soukup, Karel; Maixnerová, Lucie
Ústav chemických procesů, 2013

Screening, identification and analysis of metabolites in the fungus Purpureocillium lilacinus
Šimek, Petr
2013 - English
The delivered samples of the strain Purpureocillium lilacinus PL11 were extracted for analysis of polar metabolites and the extracts were subjected to LC-MS analysis. Keywords: Purpureocillium lilacinus Available at various institutes of the ASCR
Screening, identification and analysis of metabolites in the fungus Purpureocillium lilacinus

The delivered samples of the strain Purpureocillium lilacinus PL11 were extracted for analysis of polar metabolites and the extracts were subjected to LC-MS analysis.

Šimek, Petr
Biologické centrum, 2013

WP5 Status Report Months 31 to 50
Křišťál, Jiří; Stavárek, Petr; Jiřičný, Vladimír
2013 - English
Within WP5 in this reporting period focused on the development of a new intensified reactor concept for sulph(on)ation reaction. Based on the previous hydrodynamic experiments and mathematical models we designed a new reactor – microSulphonator. We also constructed and manufactured several prototypes that were later tested with model fluids. Experimental data were used for the validation of the models defined previously. Results of this period served as a basis for the final microSulphonators to be tested in the PGB pilot plant during the demonstration phase of the F3 project. Keywords: microreactor desing; gas-liquid reaction; pilot plant demonstration Available at various institutes of the ASCR
WP5 Status Report Months 31 to 50

Within WP5 in this reporting period focused on the development of a new intensified reactor concept for sulph(on)ation reaction. Based on the previous hydrodynamic experiments and mathematical models ...

Křišťál, Jiří; Stavárek, Petr; Jiřičný, Vladimír
Ústav chemických procesů, 2013

Edge Effects in Rotational Viscometry III. ZZ and KK Sensors, Total Slip Pseudosimilarity
Wein, Ondřej
2013 - English
This report presents a next step of our effort in developing a system of corrections on edge effects in rotational AWS viscometry. In the previous two reports [4, 5], the edge corrections are given for Newtonian and pseudoplastic liquids with no-slip (adherence) boundary conditions at solid walls (BC). Keywords: edge effects; rotational viscometry; zz and kk sensors Available on request at various institutes of the ASCR
Edge Effects in Rotational Viscometry III. ZZ and KK Sensors, Total Slip Pseudosimilarity

This report presents a next step of our effort in developing a system of corrections on edge effects in rotational AWS viscometry. In the previous two reports [4, 5], the edge corrections are given ...

Wein, Ondřej
Ústav chemických procesů, 2013

F3 Factory Deliverable D8.5 on Demonstration Activities in Intensified Surfactant Making
Vanhoutte, D.; Křišťál, Jiří; Stavárek, Petr; Jiřičný, Vladimír; Haas-Santo, K.; Tarchini, R.
2013 - English
the continuos report abou of the project completed within the demonstration stage of the F3 Factory project. Keywords: process intensification; microreactors Available at various institutes of the ASCR
F3 Factory Deliverable D8.5 on Demonstration Activities in Intensified Surfactant Making

the continuos report abou of the project completed within the demonstration stage of the F3 Factory project.

Vanhoutte, D.; Křišťál, Jiří; Stavárek, Petr; Jiřičný, Vladimír; Haas-Santo, K.; Tarchini, R.
Ústav chemických procesů, 2013

Research Report T-788
Dušková, Miroslava; Dušek, Karel; Vlasák, P.
2013 - English
The project was focused on the formation of coating films from new precursors. Keywords: polymer networks; organic coating Available at various institutes of the ASCR
Research Report T-788

The project was focused on the formation of coating films from new precursors.

Dušková, Miroslava; Dušek, Karel; Vlasák, P.
Ústav makromolekulární chemie, 2013

About project

NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web

Send your suggestions and comments to nusl@techlib.cz

Provider

http://www.techlib.cz

Facebook

Other bases