Computational and experimental assessment of natural frequencies in a bladed disk system
Mekhalfia, Mohammed Lamine; Procházka, Pavel; Maturkanič, Dušan; Voronova, Evgeniya; Hodboď, Robert
2024 - English This paper examines the modal characteristics of a bladed disk in rotating machinery systems using a combination of analytical and experimental modal analysis methods. The analysis involves measuring natural frequencies and mode shapes under different operational conditions. A comparative analysis is conducted to assess modal properties obtained from both analytical and experimental approaches, while also considering the influence of rotation speed. Additionally, Finite Element Method (FEM) outputs are used to accurately position the strain gauge. Integrating these techniques provides a comprehensive understanding of the bladed disk's behaviour under varying rotational speeds, enhancing result accuracy and facilitating thorough investigation within rotating machinery systems. Keywords: natural frequencies; FEM; LDV; strain gauge Available at various institutes of the ASCR Computational and experimental assessment of natural frequencies in a bladed disk system

This paper examines the modal characteristics of a bladed disk in rotating machinery systems using a combination of analytical and experimental modal analysis methods. The analysis involves measuring ...

Mekhalfia, Mohammed Lamine; Procházka, Pavel; Maturkanič, Dušan; Voronova, Evgeniya; Hodboď, Robert
Ústav termomechaniky, 2024

Influence of ball material on the resulting fatigue life of thermal sprayed HVOF coatings in dynamic impact testing
Duliškovič, J.; Daniel, Josef; Houdková, Š.
2024 - English Dynamic impact wear, i.e. contact between two components in the presence of high cyclic local loads, is a challenging failure mode that occurs in many mechanical applications. Many previous studies have confirmed that dynamic impact testing is suitable for evaluating the contact fatigue of thermal sprayed coatings. However, the effect of the test parameters on the resulting lifetime is unclear. The aim of this study describes the effect of the ball material used in the dynamic impact test on the resulting fatigue life of the HVOF thermal sprayed coating. Three test balls made of WC/Co alloy, Si3N4 silicon nitride and 440 C steel were chosen for this study. Dynamic impaction testing was carried out on the Cr3C2-NiCr coating, which was sprayed by HVOF on a 1.2376 high-speed steel substrate. The impact lifetime was described by the number of critical impacts, i.e. the number of impacts before coating fatigue occurs. Furthermore, the depth and volume of impact craters were measured. Using scanning electron microscopy (SEM), the surface of the impacts as well as the microstructure of the coating on the cross-section in the region of the impacts were observed. Furthermore, the mechanism of crack propagation in the coating and the microstructure of the indentor were investigated. Keywords: dynamic impact test; HVOF; Cr3C2-NiCr; fatigue Available at various institutes of the ASCR Influence of ball material on the resulting fatigue life of thermal sprayed HVOF coatings in dynamic impact testing

Dynamic impact wear, i.e. contact between two components in the presence of high cyclic local loads, is a challenging failure mode that occurs in many mechanical applications. Many previous studies ...

Duliškovič, J.; Daniel, Josef; Houdková, Š.
Ústav přístrojové techniky, 2024

Functional Tungsten-based thin films and their characterization
Košelová, Zuzana; Horáková, L.; Sobola, Dinara; Burda, Daniel; Knápek, Alexandr; Fohlerová, Z.
2024 - English Anodizing is a technique by which thin oxide layers can be formed on a surface. Thin oxide layers have been found to be useful in a variety of applications, including emitters of electrons. Tungsten is still a common choice for cold field emitters in commercial microscopy applications. Its suitable quality can be further improved by thin film deposition. Not only the emission characteristic can be improved, but also the emitter operating time can be extended. Tungsten oxide is known for its excellent resistance to corrosion and chemical attack due to its stable crystal structure and strong chemical bonds between tungsten and oxygen atoms. Many techniques with different advantages and disadvantages have been used for this purpose. Anodization was chosen for this work because of the controllable uniform coverage of the material and its easy availability without the need for expensive complex equipment. The anodizing process involves applying an electrical potential to tungsten while it is immersed in an electrolyte solution. This creates a thin layer of tungsten oxide on the surface of the metal. The thickness and properties of the resulting oxide layer can be controlled by adjusting the anodization conditions, such as the electrolyte solution, voltage, and the duration of the process. In this work, H3PO4 was used as the electrolyte to test whether these tungsten oxide layers would be useful for electron emitters, for use in electron guns and other devices that require high-quality electron emitters. The properties were evaluated using appropriate techniques. In general, anodization of tungsten to form thin layers of tungsten oxide layers is a promising technique for producing high quality electron emitters. Keywords: cold-field emission; thin layer deposition; tungsten oxide; resonance enhanced tunneling; anodization Available at various institutes of the ASCR Functional Tungsten-based thin films and their characterization

Anodizing is a technique by which thin oxide layers can be formed on a surface. Thin oxide layers have been found to be useful in a variety of applications, including emitters of electrons. Tungsten ...

Košelová, Zuzana; Horáková, L.; Sobola, Dinara; Burda, Daniel; Knápek, Alexandr; Fohlerová, Z.
Ústav přístrojové techniky, 2024

Microstructure modifications of Al-Si-coated press-hardened steel 22MnB5 by laser welding
Šebestová, Hana; Horník, Petr; Mika, Filip; Mikmeková, Šárka; Ambrož, Ondřej; Mrňa, Libor
2024 - English Weld microstructure depends on the characteristics of welded materials and parameters of welding technology, especially on the heat input that determines the peak temperature and the cooling rate. When the coated sheets are welded, the effect of the chemical composition of the coating must be also considered even though its thickness is only a few tens of microns. During 22MnB5+AlSi laser welding experiments, the ferrite-stabilizing elements of coating modified the weld metal microstructure. Ferrite appeared in a quenched weld metal. The rapid cooling rate accompanying welding with a focused beam limited the homogenization of the weld metal which resulted in the formation of ferritic bands in the regions rich in Si and especially in Al. On the other hand, a high level of homogenization was reached when welding with the defocused beam. The ferritic islands uniformly distributed in the weld metal were formed at 0.4 wt% and 1.6 wt% of Si and Al, respectively. The doubled heat input reduced the Al content to 0.7 wt% insufficient for the ferrite formation at still relatively high cooling rates. Predicting the distribution of ferrite in the weld metal is challenging due to its dependence on various factors, such as cooling rate and the volume of dissolved coating, which may vary with any modifications made to the welding parameters. Keywords: laser welding; high-strength steel; microstructure; heat input; ferrite stabilization Available at various institutes of the ASCR Microstructure modifications of Al-Si-coated press-hardened steel 22MnB5 by laser welding

Weld microstructure depends on the characteristics of welded materials and parameters of welding technology, especially on the heat input that determines the peak temperature and the cooling rate. ...

Šebestová, Hana; Horník, Petr; Mika, Filip; Mikmeková, Šárka; Ambrož, Ondřej; Mrňa, Libor
Ústav přístrojové techniky, 2024

Paralely a odlišnosti sociálních situací s panickým potenciálem - IMPAKT 2023
Červenka, Jan; Vinopal, Jiří
2024 - Czech Výzkumná zpráva s hlavními výsledky dotazníkových šetření provedených v rámci projektu „Paralely a odlišnosti sociálních situací s panickým potenciálem - příklad RMU a pandemie koronaviru v české společnosti“ v roce 2023. A research report with main outputs of the surveys conducted under the project „Parallels and Differences of Social Situations with Panic Potential - an example of RMU and a coronavir pandemic in Czech society“ in 2023. Keywords: social panic; radiation; citizen science Available at various institutes of the ASCR Paralely a odlišnosti sociálních situací s panickým potenciálem - IMPAKT 2023

Výzkumná zpráva s hlavními výsledky dotazníkových šetření provedených v rámci projektu „Paralely a odlišnosti sociálních situací s panickým potenciálem - příklad RMU a pandemie koronaviru v české ...

Červenka, Jan; Vinopal, Jiří
Sociologický ústav, 2024

Vrt DO 599. Paleomagnetický a magnetomineralogický výzkum. Závěrečná zpráva
Kdýr, Šimon; Pruner, Petr; Uçar, Hakan; Elbra, Tiiu
2024 - Czech Keywords: palaeomagnetism; rock-magnetism; greigite Available at various institutes of the ASCR Vrt DO 599. Paleomagnetický a magnetomineralogický výzkum. Závěrečná zpráva

Kdýr, Šimon; Pruner, Petr; Uçar, Hakan; Elbra, Tiiu
Geologický ústav, 2024

Využití termografie v průzkumech památek
Valach, Jaroslav; Eisler, Marek
2024 - Czech Termografie rozšiřuje portfolia metod, jimiž lze studovat vlastnosti objektů okolního světa. Ještě před deseti lety byla tato technologie kvůli potenciálním vojenským aplikacím úzkostlivě kontrolována, což omezovalo konkurenci v nabídce výrobků a výrobců a vedlo k vysokým cenám zařízení založených na těchto principech. Teprve díky uvolnění této kontroly došlo k rozmachu výroby a zpřístupnění zjednodušených výrobků masovému využití, takže si dnes může zákazník například pořídit chytrý telefon s doplňkovým termografickým modulem jen s malým navýšením ceny. Spolu s dostupností zařízení pozorujeme nárůst uplatnění termografie v mnoha oblastech, včetně průzkumů staveb a památek. Thermography expands the portfolio of methods that can be used to study the properties of objects in the surrounding world. As recently as a decade ago, the technology was frowned upon for potential military applications controlled, which limited competition in the offer of products and manufacturers and led to high prices of devices based on these principles. It was only thanks to the release of this control that it happened to expand production and make simplified products available to mass use, so get it today for example, a customer can purchase a smartphone with an additional thermographic module for only with a small price increase. Together with the availability of equipment, we observe an increase in the application of thermography in many areas, including surveys of buildings and monuments. Keywords: thermography; survey of historical structures Available at various institutes of the ASCR Využití termografie v průzkumech památek

Termografie rozšiřuje portfolia metod, jimiž lze studovat vlastnosti objektů okolního světa. Ještě před deseti lety byla tato technologie kvůli potenciálním vojenským aplikacím úzkostlivě ...

Valach, Jaroslav; Eisler, Marek
Ústav teoretické a aplikované mechaniky, 2024

Metody úprav čistírenských kalů pro aplikaci v zemědělství s ohledem na mikropolutanty
Vítková, M.; Komárek, M.; Wickramasinghe, N.; Pohořelý, Michael; Moško, Jaroslav; Hušek, Matěj; Cajthaml, Tomáš; Grasserová, Alena; Čechmánková, J.; Vácha, R.; Zimová, M.
2024 - Czech Cílem předkládané metodiky je popsat možnosti úpravy čistírenských kalů kompostováním a pyrolýzou pro aplikaci v zemědělství, a to zejména s ohledem na tzv. mikropolutanty, ale i na konvenční polutanty, a posoudit rizika upravených kalů pro půdní prostředí a vstup (mikro)polutantů do pěstovaných plodin. Metodika vychází z výsledků laboratorních a terénních experimentů tříletého projektu a z kritického přístupu ke kalům jako potenciálně nebezpečnému odpadu na straně jedné a recyklovatelného zdroje živin na straně druhé. The aim of the methodology is to describe the possibilities of sewage sludge treatment by composting and pyrolysis for the application in agriculture, with particular respect to the so-called micropollutants, but also to conventional pollutants, and to assess the risks of treated sludge for the soil environment and the uptake of (micro)pollutants by cultivated crops. The methodology is based on the results from laboratory and field experiments of a three-year project and on a critical approach to sludge as a potentially hazardous waste on the one hand and a recyclable source of nutrients on the other. Keywords: pyrolysi; composting; emerging pollutants; soil; plant uptake; leaching Available on request at various institutes of the ASCR Metody úprav čistírenských kalů pro aplikaci v zemědělství s ohledem na mikropolutanty

Cílem předkládané metodiky je popsat možnosti úpravy čistírenských kalů kompostováním a pyrolýzou pro aplikaci v zemědělství, a to zejména s ohledem na tzv. mikropolutanty, ale i na konvenční ...

Vítková, M.; Komárek, M.; Wickramasinghe, N.; Pohořelý, Michael; Moško, Jaroslav; Hušek, Matěj; Cajthaml, Tomáš; Grasserová, Alena; Čechmánková, J.; Vácha, R.; Zimová, M.
Ústav chemických procesů, 2024

Česká putování za Richardem Wagnerem
Fránek, Michal; Kopecký, J.
2024 - Czech Studie zkoumá fenomén českých cest za slavným německým skladatelem Richardem Wagnerem a do míst spojených s jeho kultem (Mnichov, Bayreuth, Curych atd.). Zaměřuje se na wagnerovské cesty – uskutečněné i neuskutečněné – českých skladatelů (Bedřich Smetana, Antonín Dvořák, Zdeněk Fibich, Josef Bohuslav Foerster), interpretů (Ema Destinnová, Karel Burian aj.), hudebních kritiků (Otakar Hostinský, V. V. Zelený), malířů (Jaroslav Čermák) a spisovatelů (Julius Zeyer, Jaroslav Maria, Teréza Nováková), přičemž sleduje jejich různé motivace. The study explores the phenomenon of Czech travels to famous German composer Richard Wagner and to the places associated with his cult (Munich, Bayreuth, Zurich, etc.). It focuses on the Wagnerian journeys – accomplished and not – of Czech composers (Bedřich Smetana, Antonín Dvořák, Zdeněk Fibich, Josef Bohuslav Foerster), performers (Ema Destinnová, Karel Burian, etc.), music critics (Otakar Hostinský, V. V. Zelený), painters (Jaroslav Čermák) and writers (Julius Zeyer, Jaroslav Maria, Teréza Nováková), tracing their different motivations. Keywords: Richard Wagner; travelling to artists Available at various institutes of the ASCR Česká putování za Richardem Wagnerem

Studie zkoumá fenomén českých cest za slavným německým skladatelem Richardem Wagnerem a do míst spojených s jeho kultem (Mnichov, Bayreuth, Curych atd.). Zaměřuje se na wagnerovské cesty – uskutečněné ...

Fránek, Michal; Kopecký, J.
Ústav pro českou literaturu, 2024

Verification of the dynamic properties of a new model turbine wheel with free blades
Voronova, Evgeniya; Procházka, Pavel; Maturkanič, Dušan; Mekhalfia, Mohammed Lamine; Hodboď, Robert
2024 - English The paper describes a new experimental model of turbine wheel with free blades. Verification tests were carried out using a Doppler laser vibrometer, with a focus on the equipment parameters under various conditions. The measurements were performed in the Laboratory of Rotational Laser Vibrometry originated at the Institute of Thermomechanics AS CR, v.v.i. Keywords: natural frequencies; vibration; blade; laser; turbine Available at various institutes of the ASCR Verification of the dynamic properties of a new model turbine wheel with free blades

The paper describes a new experimental model of turbine wheel with free blades. Verification tests were carried out using a Doppler laser vibrometer, with a focus on the equipment parameters under ...

Voronova, Evgeniya; Procházka, Pavel; Maturkanič, Dušan; Mekhalfia, Mohammed Lamine; Hodboď, Robert
Ústav termomechaniky, 2024