Number of found documents: 2104
Published from to

Applying a two degree of freedom model for drive-by identification
Bayer, Jan
2024 - English
A new concept of drive-by identification is examined applying the analogy with a Two Degree Of Freedom (DOF) system where the bridge is considered the ground-supported spring-mass and the moving spring-mass the second DOF. The response of the moving spring-mass is simulated on a bridge model using different road profiles and compared to parameters of the corresponding two DOF system. The focus is the spectral shift that can be observed on the moving spring-mass during its passage along the bridge and could possibly be applied for drive-by identification. The accuracy mainly depends on the relation of the moving spring-mass to the bridge mass and the relation between the natural frequency of the spring-mass and those of the bridge. The simulations showed that road profile can significantly reduce the accuracy of identified results, which imposes limits on practical applications. Keywords: drive-by identification; structural health monitoring; finite element analysis; road roughness; two DOF system Available in digital repository of the ASCR
Applying a two degree of freedom model for drive-by identification

A new concept of drive-by identification is examined applying the analogy with a Two Degree Of Freedom (DOF) system where the bridge is considered the ground-supported spring-mass and the moving ...

Bayer, Jan
Ústav teoretické a aplikované mechaniky, 2024

Solution methods for an aeroelastic problem with combined harmonic and stochastic excitation
Fischer, Cyril; Náprstek, Jiří
2024 - English
Assessing responses in slender engineering structures facing both deterministic harmonic and stochastic excitation is often based on an approximation by the single-degree-of-freedom van der Pol-type nonlinear model. Determining the response probability density function involves solving the Fokker-Planck equation, which is generally a challenging task. Hence, semi-analytical and numerical methods come into play. This contribution reviews several possible techniques and spotlights the exponential-polynomial-closure method. The shown results are limited, as the paper reflects an early stage of the relevant research direction. Keywords: Fokker-Planck equation; stochastic averaging; numerical solution; Galerkin approximation; van der Pol-type oscillator; partial amplitudes; exponential-polynomial-closure method Available in digital repository of the ASCR
Solution methods for an aeroelastic problem with combined harmonic and stochastic excitation

Assessing responses in slender engineering structures facing both deterministic harmonic and stochastic excitation is often based on an approximation by the single-degree-of-freedom van der Pol-type ...

Fischer, Cyril; Náprstek, Jiří
Ústav teoretické a aplikované mechaniky, 2024

Galloping of insulated bundled overhead line simplified analysis
Hračov, Stanislav; Macháček, Michael
2024 - English
Our paper provides an analysis of the susceptibility of a particular bundled overhead line to galloping. It presents a case study of an aerial bundled cable, consisting of four conductors insulated by polyethylene, and used for low-voltage power lines. The susceptibility to loss of stability is analyzed for cable without and with simulated icing observed on similar real conductors. In the first case, the proneness to galloping was excluded based on the results of CFD simulation and the Den Hartog criterion. In latter case, the possible occurrence of galloping was confirmed. The critical wind velocity for the ice-covered cable was calculated utilizing quasi-steady theory. Finally, the amplitudes of limit cycle oscillation for supercritical wind speeds were estimated based on simplified numerical analysis. Keywords: aerial bundled cable; wind effects; galloping; limit cycle oscillation Available in digital repository of the ASCR
Galloping of insulated bundled overhead line simplified analysis

Our paper provides an analysis of the susceptibility of a particular bundled overhead line to galloping. It presents a case study of an aerial bundled cable, consisting of four conductors insulated by ...

Hračov, Stanislav; Macháček, Michael
Ústav teoretické a aplikované mechaniky, 2024

LES simulations of airflow around rectangle with side ratio 2:1 and their comparison with experiments
Ledvinková, Blanka; Hračov, Stanislav; Macháček, Michael
2024 - English
Our contribution is focused on the comparison of the experimental investigations and of the numerical 3D LES simulations of the airflow around sharply edged rectangle with side ratio 2:1. The rectangle object was exposed to the airflow having a given velocity at different angles of the wind attack in the wind tunnel with the aim to obtain the curves of the aerodynamic coefficients and Strouhal number depending on the impact angle. The comparative numerical 3D simulations of the wind tunnel testing were performed using COMSOL Multiphysics and OpenFoam both incorporating the Large Eddy Simulation (LES) method. Keywords: rectangle 2:1; wind tunnel; LES simulation; aerodynamic characteristics Available in digital repository of the ASCR
LES simulations of airflow around rectangle with side ratio 2:1 and their comparison with experiments

Our contribution is focused on the comparison of the experimental investigations and of the numerical 3D LES simulations of the airflow around sharply edged rectangle with side ratio 2:1. The ...

Ledvinková, Blanka; Hračov, Stanislav; Macháček, Michael
Ústav teoretické a aplikované mechaniky, 2024

Gas sensors based on diamond heterostructures for air quality monitoring
Kočí, Michal; Szabó, Ondrej; Izsák, T.; Sojková, M.; Godzierz, M.; Wróbel, P.; Husák, M.; Kromka, Alexander
2024 - English
Currently, great emphasis is placed on air quality and the presence of pollutants. Attention is therefore focused on new gas-sensing materials enabling detection even at low (up to room) temperatures with sufficient response and short reaction time. Here, we investigate the suitability of H-NCD films and their heterostructures with MoS2, GO, rGO, SH-GO, or Au NPs for gas sensing applications. Electrical properties are measured for oxidizing gas NO2, reducing gas NH3, and chemical vapor of ethanol, and at temperatures varied from room temperature to 125 °C. In contrast to the individual forms of employed materials with limited response to the exposed gases, the HNCD heterostructures revealed better sensing properties. In particular, the Au NPs/H-NCD heterostructures revealed a higher response at 125 °C in contrast to H-NCD, MoS2/H-NCD had quite good response even at room temperature and GO/H-NCD revealed high sensitivity to chemical vapor, which further improved for the SH-GO/HNCD. Keywords: gas sensors; nanocrystalline diamond; heterostructures; air quality monitoring Fulltext is available at external website.
Gas sensors based on diamond heterostructures for air quality monitoring

Currently, great emphasis is placed on air quality and the presence of pollutants. Attention is therefore focused on new gas-sensing materials enabling detection even at low (up to room) temperatures ...

Kočí, Michal; Szabó, Ondrej; Izsák, T.; Sojková, M.; Godzierz, M.; Wróbel, P.; Husák, M.; Kromka, Alexander
Fyzikální ústav, 2024

Surface changes induced by plasma treatment and high temperature annealing of silicon dioxide microparticles
Babčenko, Oleg; Remeš, Zdeněk; Beranová, Klára; Kolářová, Kateřina; Lörinc, J.; Prošek, Z.; Tesárek, P.
2024 - English
Due to the high surface to volume ratio, the particles’ surface properties modification defines its properties in general, which is crucial for their use. From this point of view, plasma processing or high temperature annealing can be considered as the universal techniques for efficient modification of materials in the form of powder. In this study, the silicon dioxide microparticles have been treated in a hydrogen, oxygen or vacuum by low temperature plasma or annealing. The change of SiO2 microparticles properties was investigated by photoluminescence spectroscopy at room and low temperature. High temperature annealing in hydrogen induced under UV excitation photoluminescence in the near UV and visible light indicating the change of defect states on the surface of the microparticles. We believe that observed findings clearly demonstrate useful method for analysis of SiO2 microparticles surface modification attractive also for fundamental research. Keywords: silicon dioxide; plasma treatment; annealing; photoluminescence; measuring setup Fulltext is available at external website.
Surface changes induced by plasma treatment and high temperature annealing of silicon dioxide microparticles

Due to the high surface to volume ratio, the particles’ surface properties modification defines its properties in general, which is crucial for their use. From this point of view, plasma processing or ...

Babčenko, Oleg; Remeš, Zdeněk; Beranová, Klára; Kolářová, Kateřina; Lörinc, J.; Prošek, Z.; Tesárek, P.
Fyzikální ústav, 2024

Improvement of an unbaffled stirred tank mixing characteristics using variable speed impeller
Gebouský, Ondřej; Haidl, Jan; Bodnár, J.; Pivokonský, Martin
2024 - English
Unbaffled mixing tanks with magnetically driven impellers are increasingly used in biotechnological and pharmaceutical industries, combining the benefits of a closed, sterile environment with easy equipment cleanability. On the other hand, missing internals, such as baffles or cooling coils, have an adverse effect on the equipment mixing characteristics, namely the batch\nhomogenization time. In our previous research, we uncovered that the eccentricity and inclination of the impeller – both employed routinely to enhance the mixing characteristics of unbaffled vessels – are not fully effective in the suppression of central vortex formation resulting in the increase in the homogenization time. In this work, we propose a simple solution to counteract the central vortex formation – a periodical variation of impeller rotational speed. This approach destabilizes the central vortex, significantly reducing homogenization time while maintaining the benefits of the original unbaffled setup. This innovation can seamlessly integrate into existing industrial setups, promising efficiency gains for biotech and pharmaceutical production. Keywords: unbaffled mixing tanks; variable rotational speed; vortex destabilization; mixing time improvement Available in digital repository of the ASCR
Improvement of an unbaffled stirred tank mixing characteristics using variable speed impeller

Unbaffled mixing tanks with magnetically driven impellers are increasingly used in biotechnological and pharmaceutical industries, combining the benefits of a closed, sterile environment with easy ...

Gebouský, Ondřej; Haidl, Jan; Bodnár, J.; Pivokonský, Martin
Ústav pro hydrodynamiku, 2024

Finite element approximation of fluid structure interaction using Taylor-Hood and Scott-Vogelius elements
Vacek, Karel; Sváček, P.
2024 - English
This paper addresses the problem of fluid flow interacting a vibrating solid cylinder described by one degree of freedom system and with fixed airfoil. The problem is described by the incompressible Navier-Stokes equations written in the arbitrary Eulerian-Lagrangian (ALE) formulation. The ALE mapping is constructed with the use of a pseudo-elastic approach. The flow problem is numerically approximated by the finite element method (FEM). For discretization of the fluid flow, the results obtained by both the Taylor-Hood (TH) element and the Scott-Vogelius (SV) finite element are compared. The TH element satisfies the Babuška-Brezzi inf-sup condition, which guarantees the stability of the scheme. In the case of the SV element the mesh, that is created as a barycentric refinement of regular triangulation, is used to satisfy the Babuška-Brezzi condition. The numerical results for two benchmark problems are shown. Keywords: finite element method; arbitrary Lagrangian-Eulerian method; Scott-Vogelius element; Taylor-Hood element Available in digital repository of the ASCR
Finite element approximation of fluid structure interaction using Taylor-Hood and Scott-Vogelius elements

This paper addresses the problem of fluid flow interacting a vibrating solid cylinder described by one degree of freedom system and with fixed airfoil. The problem is described by the incompressible ...

Vacek, Karel; Sváček, P.
Matematický ústav, 2024

Flow simulations approach for flocculation tanks
Idžakovičová, Kristýna; Bílek, Vojtěch; Haidl, Jan; Isoz, M.; Pivokonský, Martin
2024 - English
Flocculation in water treatment facilities plays a key role in the separation of colloidal inorganic and organic substances. Its optimization leads to a significant increase in its efficiency and savings of operational costs. However, it is currently based on trial-and-error experimental approaches. In this contribution, we focus on flow modeling in stirred flocculation tanks that would, after coupling with a calibrated model of particle aggregation, enable simulationbased flocculation optimization. Despite the abundance of literature on stirred tank modeling, there is no universal agreement on the methodology used to describe turbulence nor on the approach to the computational mesh creation. Consequently, there is no unified methodology for simulations and their validation. To address this, we present a best-practice methodology for economical, yet reliable flow simulations in the said device. This methodology includes the choice of the turbulence model, the approach to the design of a high quality mesh suitable for arbitrary geometries, and results evaluation. It is developed based on an extensive literature review, a multitude of flow simulations using several meshes of progressively higher quality and resolution, and various strategies to converge to steady-state flow conditions. The simulation quality indicators used here involve comparison with the experimental data on fluid velocity, stirrer power output, and flow rate through the impeller zone. Additionally, the resulting flow simulation models are compared using tracer transport simulations, hinting at their potential for coupling with particle aggregation models. Keywords: flocculation tank; stirring; MRF; CFD; OpenFOAM Available in digital repository of the ASCR
Flow simulations approach for flocculation tanks

Flocculation in water treatment facilities plays a key role in the separation of colloidal inorganic and organic substances. Its optimization leads to a significant increase in its efficiency and ...

Idžakovičová, Kristýna; Bílek, Vojtěch; Haidl, Jan; Isoz, M.; Pivokonský, Martin
Ústav pro hydrodynamiku, 2024

Galloping of insulated bundled overhead line - nonlinear numerical analysis in time domain
Macháček, Michael; Hračov, Stanislav
2024 - English
Our contribution focuses on a 3D numerical nonlinear analysis of galloping in a specific bundled overhead line with ice accretion. We studied the susceptibility to this self-excited oscillation, critical onset wind speeds, and global dynamic response of a very low-tensioned line with simulated icing observed on similar real conductors. Due to the highly nonlinear mechanical behavior of such a flexible cable, we employed the Newmark integration method combined with the iterative Newton-Raphson method. We analyzed two numerical models of the overhead line loaded by the wind: one assuming nonlinearity only in the wind load, while retaining the linearity of the mechanical system itself, and the other representing a fully nonlinear system including geometrical nonlinearity. Our analysis revealed that the determined critical wind speeds for the onset of galloping are in relatively close ranges for both models. However, numerical simulations with the fully nonlinear system indicated significantly lower amplitudes of limit cycle oscillations, especially at higher wind speeds, compared to the linear model of the line. This underscores the necessity of using fully nonlinear models during the design stage of such low-tensioned aerial conductors. Keywords: aerial bundled conductors; wind effects; galloping; limit cycle oscillation Available in digital repository of the ASCR
Galloping of insulated bundled overhead line - nonlinear numerical analysis in time domain

Our contribution focuses on a 3D numerical nonlinear analysis of galloping in a specific bundled overhead line with ice accretion. We studied the susceptibility to this self-excited oscillation, ...

Macháček, Michael; Hračov, Stanislav
Ústav teoretické a aplikované mechaniky, 2024

About project

NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web

Send your suggestions and comments to nusl@techlib.cz

Provider

http://www.techlib.cz

Facebook

Other bases