No (3138)
Number of found documents:
3138
Published from
to
Computational and experimental assessment of natural frequencies in a bladed disk system
Mekhalfia, Mohammed Lamine; Procházka, Pavel; Maturkanič, Dušan; Voronova, Evgeniya; Hodboď, Robert
2024 - English
This paper examines the modal characteristics of a bladed disk in rotating machinery systems using a combination of analytical and experimental modal analysis methods. The analysis involves measuring natural frequencies and mode shapes under different operational conditions. A comparative analysis is conducted to assess modal properties obtained from both analytical and experimental approaches, while also considering the influence of rotation speed. Additionally, Finite Element Method (FEM) outputs are used to accurately position the strain gauge. Integrating these techniques provides a comprehensive understanding of the bladed disk's behaviour under varying rotational speeds, enhancing result accuracy and facilitating thorough investigation within rotating machinery systems.
Keywords:
natural frequencies; FEM; LDV; strain gauge
Available at various institutes of the ASCR
Computational and experimental assessment of natural frequencies in a bladed disk system
This paper examines the modal characteristics of a bladed disk in rotating machinery systems using a combination of analytical and experimental modal analysis methods. The analysis involves measuring ...
Verification of the dynamic properties of a new model turbine wheel with free blades
Voronova, Evgeniya; Procházka, Pavel; Maturkanič, Dušan; Mekhalfia, Mohammed Lamine; Hodboď, Robert
2024 - English
The paper describes a new experimental model of turbine wheel with free blades. Verification tests were carried out using a Doppler laser vibrometer, with a focus on the equipment parameters under various conditions. The measurements were performed in the Laboratory of Rotational Laser Vibrometry originated at the Institute of Thermomechanics AS CR, v.v.i.
Keywords:
natural frequencies; vibration; blade; laser; turbine
Available at various institutes of the ASCR
Verification of the dynamic properties of a new model turbine wheel with free blades
The paper describes a new experimental model of turbine wheel with free blades. Verification tests were carried out using a Doppler laser vibrometer, with a focus on the equipment parameters under ...
Modification of cooling system for laboratory measurement of rotor blade vibration
Maturkanič, Dušan; Procházka, Pavel; Hodboď, Robert; Voronova, Evgeniya; Mekhalfia, Mohammed Lamine
2024 - English
Last year, the replacement of the turbine wheel model was completed in the Laboratory of Rotational Laser Vibrometry of the Institute of Thermomechanics AS CR, v.v.i. Based on previous experience and the expected higher operating load planned for the new wheel, the cooling system was modified at the same time. The paper describes the main effort in this direction and the results that clarify the previous damage of the measuring device.
Keywords:
blade; vibration; cooling system; measurement; laboratory
Available at various institutes of the ASCR
Modification of cooling system for laboratory measurement of rotor blade vibration
Last year, the replacement of the turbine wheel model was completed in the Laboratory of Rotational Laser Vibrometry of the Institute of Thermomechanics AS CR, v.v.i. Based on previous experience and ...
DYNAMICS OF MACHINES AND MECHANICAL SYSTEMS WITH INTERACTIONS : PROCEEDINGS DYMAMESI 2024
Zolotarev, Igor; Pešek, Luděk; Kozień, M. S.
2024 - English
The aim of the DYMAMESI is to facilitate the exchange of up to date information and knowledge among specialists in structural and multibody dynamics, in coupled interacting systems as aero-elasticity, hydro-elasticity, biomechanics, systems with feedbacks and mechatronics. In 2023 will be hosted by Cracow University of Technology, Institute of Applied Mechanics, Section of Dynamics of Systems.
Keywords:
dynamics; vibrations of mechanical systems; vibrodiagnostics; energy transformations
Available at various institutes of the ASCR
DYNAMICS OF MACHINES AND MECHANICAL SYSTEMS WITH INTERACTIONS : PROCEEDINGS DYMAMESI 2024
The aim of the DYMAMESI is to facilitate the exchange of up to date information and knowledge among specialists in structural and multibody dynamics, in coupled interacting systems as aero-elasticity, ...
Optical and Pneumatic Measurements on TR-U-11 Cascade
Luxa, Martin; Hála, Jindřich; Šimurda, David
2023 - English
The report contains results and evaluation of conducted optical (interferometry and schlieren technique) and pneumatic measurements on the first variant of the new tip section, intended for turbine rotor blade.
Keywords:
transonic flow; rotor turbine blade; tip section
Available at various institutes of the ASCR
Optical and Pneumatic Measurements on TR-U-11 Cascade
The report contains results and evaluation of conducted optical (interferometry and schlieren technique) and pneumatic measurements on the first variant of the new tip section, intended for turbine ...
Dynamics of Machines and Mechanical Systems with Interactions, DYMAMESI 2023
Zolotarev, Igor; Pešek, Luděk; Kozień, M. S.
2023 - English
The aim of the DYMAMESI is to facilitate the exchange of up to date information and knowledge among specialists in structural and multibody dynamics, in coupled interacting systems as aero-elasticity, hydro-elasticity, biomechanics, systems with feedbacks and mechatronics. The colloquium DYMAMESI 2021 is cofunded by the Strategy AV21 initiative of the Czech Academy of Sciences of the Czech Republic, and in 2021 will be hosted by Cracow University of Technology, Institute of Applied Mechanics, Section of Dynamics of Systems.
Keywords:
dynamics; vibrations of mechanical systems; vibrodiagnostics; energy transformations
Available at various institutes of the ASCR
Dynamics of Machines and Mechanical Systems with Interactions, DYMAMESI 2023
The aim of the DYMAMESI is to facilitate the exchange of up to date information and knowledge among specialists in structural and multibody dynamics, in coupled interacting systems as aero-elasticity, ...
Závěrečná zpráva o řešení projektu MPO čís. CZ.01.1.02/0.0/0.0ú20_321/0023673
Zolotarev, Igor; Pešek, Luděk; Gabriel, Dušan; Procházka, Pavel P.
2023 - Czech
Projektu MPO s názvem Vývoj rozvaděče pro těžké podmínky a snížení rizik ohrožení kritické infrastruktury byl zaměřen na výzkum, vývoj optimalizované konstrukce a zajištění konfigurační technologie pro opakovanou produkci různých variant modulárního systémového rozváděče pro použití v těžkých podmínkách a snížení rizik seizmického ohrožení, pro zajištění spolehlivosti kritické infrastruktury. Výstupem má být prototyp seizmicky robustního zařízení s dynamicky odlehčené konstrukce, vysokou spolehlivostí funkce sestavy rozvaděče a elektrovýzbroje a SW aplikace pro interaktivní návrhy a dokumentaci. The MIT project entitled Development of a switchgear for severe conditions and reduction of risks of critical infrastructure threat was focused on research, development of optimized design and provision of configuration technology for repeated production of different variants of modular system switchgear for use in severe conditions and reduction of risks of seismic threat, to ensure the reliability of critical infrastructure. The output is to be a prototype seismically robust device with a dynamically lightweight design, high reliability of switchgear and electrical equipment assembly function, and a software application for interactive design and documentation.
Keywords:
vibration; natural frequencies; modes of vibration; seismic resistance; dynamic properties of structures
Available at various institutes of the ASCR
Závěrečná zpráva o řešení projektu MPO čís. CZ.01.1.02/0.0/0.0ú20_321/0023673
Projektu MPO s názvem Vývoj rozvaděče pro těžké podmínky a snížení rizik ohrožení kritické infrastruktury byl zaměřen na výzkum, vývoj optimalizované konstrukce a zajištění konfigurační technologie ...
Posouzení výpočtové dokumentace zaměřené na hodnocení analýzy dopadu zvýšení výkonu bloků EDU II na vertikální stabilitu a dynamickou odezvu vnitřních částí reaktoru včetně uvažování nehody LOCA DN500
Pták, Svatopluk
2023 - Czech
Tato technická zpráva shrnuje výsledky posouzení výpočtové dokumentace zaměřené na hodnocení analýzy dopadu zvýšení výkonu bloků EDU II v souvislosti s projektem '6729 − Využití projektových rezerv bloků EDU II' na vertikální stabilitu a dynamickou odezvu vnitřních částí reaktoru včetně uvažování nehody LOCA DN500, konkrétně se jedná o posouzení dvou zpráv autorských kolektivů z ÚJV, a. s.: 'M. Klemenc a P. Gál: Analýzy dopadu zvýšení výkonu na dynamické chování VČR při nehodě LOCA DN500, zpráva ÚJV DITI 2301/1242, 12/2020' a M. Švrček a J. Vyčichl: Analýzy dopadu zvýšení výkonu na vertikální stabilitu a vibrační odezvu (vysokocyklovou únavu) VČR, zpráva ÚJV DITI 2301/1307, 08/2021. This technical report summarizes the results of the assessment aimed at evaluation of the impact analysis of the increase in the performance of EDU II units in connection with the project '6729 - Use of design margins of the Dukovany reactor units' on the vertical stability and dynamic response of the reactor internal components, including consideration of the LOCA DN500 event, specifically, it is an assessment of two reports of author collectives from ÚJV, a. s.: M. Klemenc and P. Gál: 'Analyzes of the impact of the power increase on the dynamic behavior of RIC during the LOCA DN500 event, report ÚJV DITI 2301/1242, 12/2020 and M. Švrček a J. Vyčichl: 'Analyzes of the impact of increasing power on vertical stability and vibration response (high-cycle fatigue) of RIC', report ÚJV DITI 2301/1307, 08/2021.
Keywords:
loss coolant accident; dynamic response; primary pipelime of nuclear reactor; internal parts of nuclear reactor
Available at various institutes of the ASCR
Posouzení výpočtové dokumentace zaměřené na hodnocení analýzy dopadu zvýšení výkonu bloků EDU II na vertikální stabilitu a dynamickou odezvu vnitřních částí reaktoru včetně uvažování nehody LOCA DN500
Tato technická zpráva shrnuje výsledky posouzení výpočtové dokumentace zaměřené na hodnocení analýzy dopadu zvýšení výkonu bloků EDU II v souvislosti s projektem '6729 − Využití projektových rezerv ...
Souhrnná zpráva zakázky OZM-LCF-2023: Experimentální hodnocení vlastností oceli 1.4529 z hlediska nízkocyklové únavy
Štefan, Jan; Parma, Slavomír
2023 - Czech
Tato technická zpráva byla zpracována v rámci zakázky „OZM-LCF-2023: Experimentální hodnocení vlastností oceli 1.4529 z hlediska nízkocyklové únavy“. Ve zprávě jsou přehledně zdokumentovány všechny podstatné informace týkající se odborného plnění zakázky počínaje návrhem experimentálního programu, přes protokoly o provedených experimentech až po souhrnné vyhodnocení programu vč. návrhů pro případné rozšíření zakázky a navazující experimentální činnost. This technical report was prepared within the framework of the contract "OZM-LCF-2023: Experimental evaluation of the properties of steel 1.4529 in terms of low cycle fatigue". The report clearly documents all relevant information concerning the technical performance of the contract, starting from the design of the experimental program, through the protocols of the experiments performed, to the summary evaluation of the program, including proposals for possible contract extension and follow-up experimental activities.
Keywords:
material testing; low-cycle fatigue; austenitic stainless steels
Available at various institutes of the ASCR
Souhrnná zpráva zakázky OZM-LCF-2023: Experimentální hodnocení vlastností oceli 1.4529 z hlediska nízkocyklové únavy
Tato technická zpráva byla zpracována v rámci zakázky „OZM-LCF-2023: Experimentální hodnocení vlastností oceli 1.4529 z hlediska nízkocyklové únavy“. Ve zprávě jsou přehledně zdokumentovány všechny ...
Measurements on KR-D-11B Optimized Subsonic Blade Cascade
Šimurda, David; Hála, Jindřich
2023 - English
This report contains results and evaluation of aerodynamic measurements conducted on a subsonic compressor blade cascade.
Keywords:
compressor blade cascade; experiment; subsonic flow; optimized profile
Available at various institutes of the ASCR
Measurements on KR-D-11B Optimized Subsonic Blade Cascade
This report contains results and evaluation of aerodynamic measurements conducted on a subsonic compressor blade cascade.
NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web
Send your suggestions and comments to nusl@techlib.cz
Provider
Other bases