Yes (4319)
Number of found documents:
4319
Published from
to
HIGHLY-TIME RESOLVED ELEMENTAL SOURCE APPORTIONMENT OF PM2.5 AT AN URBAN TRAFFIC SITE IN PRAGUE
Windell, Laurence Christian; Pokorná, Petra; Ondráček, Jakub; Schwarz, Jaroslav; Lhotka, Radek; Vodička, Petr; Zíková, Naděžda; Hopke, P.K.; Ždímal, Vladimír
2023 - English
This work aims to quantify metal emissions from traffic at an urban traffic site in Prague, Czech Republic, identify key tracers of emissions, and investigate exhaust and non-exhaust emissions observable in fine particulate matter (PM2.5). This project signifies the first high-time resolution elemental analysis of Prague aerosols.
Keywords:
source apportionment; traffic; online
Available in a digital repository NRGL
HIGHLY-TIME RESOLVED ELEMENTAL SOURCE APPORTIONMENT OF PM2.5 AT AN URBAN TRAFFIC SITE IN PRAGUE
This work aims to quantify metal emissions from traffic at an urban traffic site in Prague, Czech Republic, identify key tracers of emissions, and investigate exhaust and non-exhaust emissions ...
INFLUENCE OF RESPIRATORY TRACT CONDITIONS ON PARTICLE SIZE DISTRIBUTIONS GENERATED BY COMMERCIALLY AVAILABLE INHALERS
Mašková, Ludmila; Ždímal, Vladimír; Ondráček, Jakub
2023 - English
Pressurized metered dose inhalers (MDI) and dry powder inhalers (DPI) are an integral part of the treatment of lung diseases such as asthma and chronic obstructive pulmonary disease (COPD) (Vichrow et al., 2008). An important characteristic of particles dosed by MDI and DPI is particle size distribution (PSD) (Byron, 1990). This may vary depending on the formulation, but also on the temperature and relative humidity (RH) changes during the transport from the inhaler to the human respiratory tract. The aim of this study was to determine the influence of RH and inspiratory flow rates on the PSD\ncharacteristics and predict deposition efficiency of inhalable particles in the lungs.
Keywords:
number size distribution; inhaler; hygroscopicity
Available in a digital repository NRGL
INFLUENCE OF RESPIRATORY TRACT CONDITIONS ON PARTICLE SIZE DISTRIBUTIONS GENERATED BY COMMERCIALLY AVAILABLE INHALERS
Pressurized metered dose inhalers (MDI) and dry powder inhalers (DPI) are an integral part of the treatment of lung diseases such as asthma and chronic obstructive pulmonary disease (COPD) (Vichrow et ...
VE VODĚ ROZPUSTNÉ SLOUČENINY PM2.5 NA TŘECH VENKOVSKÝCH POZAĎOVÝCH LOKALITÁCH VE STŘEDNÍ EVROPĚ V CHLADNÝCH A TEPLÝCH OBDOBÍCH
Schwarz, Jaroslav; Vodička, Petr; Lhotka, Radek; Pokorná, Petra; Zíková, Naděžda; Ondráček, Jakub; Aurora, S.; Poulain, L.; Herrmann, H.; Ždímal, Vladimír
2023 - Czech
Iontová chromatografie (IC) byla použita k charakterizaci ve vodě rozpustných sloučenin v PM2,5 během zimní a letní kampaně na třech venkovských lokalitách ve střední Evropě v časovém rozlišení 12 hodin (den/noc). Koncentrace aerosolů ze spalování biomasy se v zimě od Melpitzu po Košetice zdvojnásobily, mořská sůl vykazovala opačné chování. V létě byly v Melpitzu zjištěny vyšší hodnoty síranů a kyseliny metansulfonové. Poměr denních a nočních koncentrací vykazoval vyšší denní koncentrace fosforečnanů a sloučenin spojených se spórami hub a bakterií, zatímco vyšší noční koncentrace byly spojeny se spalováním dřeva. Jako přibližné měřítko pro rozlišení místních a dálkově přenášených aerosolů byl použit ventilační index. Produkty spalování biomasy byly identifikovány jako většina místních aerosolů, zatímco mořská sůl jako dálkově přenášený aerosol. Ion chromatography (IC) was used to characterize water soluble compounds in PM2.5 during winter and summer campaigns at three rural sites in Central Europe in 12-hour (day/night) time resolution. Concentrations of biomass combustion aerosolsdoubled from Melpitz to Košetice in winter, sea salt exhibited opposite behaviour. Summer exhibited higher sulphates and methane sulphonic acid in Melpitz. Day to night ratios showed higher day concentrations for phosphates and compounds connected to fungal spores and bacteria, while higher night concentrations were connected to wood combustion. Ventilation index was used as an approximate measure to distinguish local and long range transported aerosols. Biomass combustion products were identified as the \nmajority of local aerosols, while sea salt as long range transported one.
Keywords:
water-soluble compounds,; 3 sites; 12-h time resolution
Available in a digital repository NRGL
VE VODĚ ROZPUSTNÉ SLOUČENINY PM2.5 NA TŘECH VENKOVSKÝCH POZAĎOVÝCH LOKALITÁCH VE STŘEDNÍ EVROPĚ V CHLADNÝCH A TEPLÝCH OBDOBÍCH
Iontová chromatografie (IC) byla použita k charakterizaci ve vodě rozpustných sloučenin v PM2,5 během zimní a letní kampaně na třech venkovských lokalitách ve střední Evropě v časovém rozlišení 12 ...
ON OUR RECENT WORK IN STUDYING NEW PARTICLE FORMATION (NPF)
Kovářík, Jiří; Špalová, Anna; Roztočil, Petr; Zíková, Naděžda; Schwarz, Jaroslav; Ždímal, Vladimír
2023 - English
New particle formation (NPF) is increasingly gaining attention since it emerged roughly twenty years ago as a field of interest within the aerosol science. It studies the transition process between gas phase molecules, forming clusters and eventually becoming aerosol particles. Thus, this field is a multidisciplinary one, ranging from meteorology, atmospheric chemistry and physics, all the way through physical chemistry towards chemistry and physics of aerosols. \nRecent development of instrumentation techniques allows measuring of sub-5 nm particles and molecule clusters, neutral and also charged ones. Therefore, modern analytical methods based on these measurements are often used for NPF studies.
Keywords:
atmospheric aerosols; new particle formation; NAIS
Available in a digital repository NRGL
ON OUR RECENT WORK IN STUDYING NEW PARTICLE FORMATION (NPF)
New particle formation (NPF) is increasingly gaining attention since it emerged roughly twenty years ago as a field of interest within the aerosol science. It studies the transition process between ...
Improving computational efficiency of contact solution in fully resolved CFD-DEM simulations with arbitrarily-shaped solids
Studeník, Ondřej; Kotouč Šourek, M.; Isoz, Martin
2023 - English
The abundance of industrial processes containing both solid and liquid phases generate demand for fully resolved models allowing for detailed analysis and optimization of these processes. An established approach providing such models is based using a variant of an immersed boundary method to couple the computational fluid dynamics (CFD) and discrete element method (DEM). In the talk, we will present our custom and monolithic implementation of a fully-resolved CFDDEM solver and concentrate on the intricacies of solving contact between two arbitrarily-shaped solids. We shall propose an efficient contact treatment based on the concept of a virtual mesh, which provides the mesh resolution required by DEM through dividing the space around the contact point in a finite volume fashion without any changes to the CFD mesh itself. A substantial part of the talk will devoted to the parallelization of the contact solution, especially in the context of the domain decomposition method imposed by the CFD solver.
Keywords:
CFD; DEM; virtual mesh
Fulltext is available at external website.
Improving computational efficiency of contact solution in fully resolved CFD-DEM simulations with arbitrarily-shaped solids
The abundance of industrial processes containing both solid and liquid phases generate demand for fully resolved models allowing for detailed analysis and optimization of these processes. An ...
On the development of a numerical model for the simulation of air flow in the human airways
Lancmanová, Anna; Bodnár, Tomáš; Sequeira, A.
2023 - English
This contribution reports on an ongoing study focusing on reduced order models for incompressible viscous fluid flow in two dimensional channels. A finite difference solver was developed using a simple implementation of the immersed boundary method to represent the channel geometry. The solver was validated for unsteady flow by comparing the obtained two-dimensional numerical solutions with analytical profiles computed from the Womersley solution. Finally the 2D model was coupled to a simple 1D extension simulating the flow in axisymmetric elastic vessel (tube). Some of the coupling principles and implementation issues are discussed in detail.
Keywords:
reduced order model; incompressible Navier-Stokes equations; finite difference approximation; coupling method
Available in digital repository of the ASCR
On the development of a numerical model for the simulation of air flow in the human airways
This contribution reports on an ongoing study focusing on reduced order models for incompressible viscous fluid flow in two dimensional channels. A finite difference solver was developed using a ...
Simulating particle-laden flows: from immersed boundaries towards model order reduction
Isoz, Martin; Kubíčková, Lucie; Kotouč Šourek, M.; Studeník, Ondřej; Kovárnová, A.
2023 - English
Particle-laden flow is prevalent both in nature and in industry. Its appearance ranges from the trans-port of riverbed sediments towards the magma flow, from the deposition of catalytic material inside particulate matter filters in automotive exhaust gas aftertreatment towards the slurry transport in dredging operations. In this contribution, we focus on the particle-resolved direct numerical simulation (PR-DNS) of the particle-laden flow. Such a simulation combines the standard Eulerian approach to computational fluid dynamics (CFD) with inclusion of particles via a variant of the immersed boundary method (IBM) and tracking of the particles movement using a discrete element method (DEM). Provided the used DEM allows for collisions of arbitrarily shaped particles, PR-DNS is based (almost) entirely on first principles, and as such it is a truly high-fidelity model. The downside of PR-DNS is its immense computational cost. In this work, we focus on three possibilities of alleviating the computational cost of PR-DNS: (i) replacing PR-DNS by PR-LES or PR-RANS, while the latter requires combining IBM with wall functions, (ii) improving efficiency of DEM contact solution via adaptively refined virtual mesh, and (iii) developing a method of model order reduction specifically tailored to PR-DNS of particle-laden flows.
Keywords:
particle-laden flow; CFD-DEM; arbitrarily-shaped particles; finite volume method
Fulltext is available at external website.
Simulating particle-laden flows: from immersed boundaries towards model order reduction
Particle-laden flow is prevalent both in nature and in industry. Its appearance ranges from the trans-port of riverbed sediments towards the magma flow, from the deposition of catalytic material ...
On Reynolds-averaged turbulence modeling with immersed boundary method
Kubíčková, Lucie; Isoz, Martin
2023 - English
The immersed boundary (IB) method is an approach in the computational fluid dynamics in which complex geometry conforming meshes are replaced by simple ones and the true simulated geometry is projected onto the simple mesh by a scalar field and adjustment of governing equations. Such an approach is particularly advantageous in topology optimizations (TO) where it allows for substantial speed-up since a single mesh can be used for all the tested topologies. In our previous work, we linked our custom IB variant, the hybrid fictitious domain-immersed boundary method (HFDIB), with a TO framework and successfully carried out an optimization under laminar flow conditions. However, to allow for optimizations of reallife components, the IB approach needs to be coupled with an affordable turbulence modeling. In this contribution, we focus on extending the HFDIB approach by the possibility to perform Reynolds-averaged simulations (RAS). In particular, we implemented the k − ω turbulence model and wall functions for closure variables and velocity.
Keywords:
immersed boundary; RAS; wall functions; CFD; OpenFOAM
Fulltext is available at external website.
On Reynolds-averaged turbulence modeling with immersed boundary method
The immersed boundary (IB) method is an approach in the computational fluid dynamics in which complex geometry conforming meshes are replaced by simple ones and the true simulated geometry is ...
Finite element modal analysis of a silicone vocal fold filled with fluid
Hájek, P.; Radolf, Vojtěch; Horáček, Jaromír; Švec, J. G.
2023 - English
A three dimensional (3D) finite element (FE) model of a silicone vocal fold (VF) filled with fluid is presented here. The silicone part of the model is based on partial differential equations of the continuum mechanics and consider large deformations. The fluid domain encapsulated in the silicone VF is defined semianalytically as a lumped-element model describing the fluid in hydrostatic conditions. The elongated and pressurized silicone VF was subjected to perturbed modal analysis. Results showed that the choice of the fluid inside the VF substantially influences the natural frequencies. Namely, the water-filling lowers the natural frequencies approximately by half over the air-filling. Besides, the procedure of reverse engineering for obtaining the geometry of the VF from already 3D-printed mold is introduced.
Keywords:
perturbed modal analysis; finite element method; vocal folds; reverse engineering; biomechanics of voice
Fulltext is available at external website.
Finite element modal analysis of a silicone vocal fold filled with fluid
A three dimensional (3D) finite element (FE) model of a silicone vocal fold (VF) filled with fluid is presented here. The silicone part of the model is based on partial differential equations of the ...
Proměny interpretace hudebního folkloru: od ochrany každodenní kultury po vznik hudebního žánru (na příkladu České republiky)
Uhlíková, Lucie; Pavlicová, M.
2023 - Czech
Od 60. let 20. století se v české etnologii začaly rozvíjet snahy, které postupně začaly zařazovat projevy folkloru v jejich druhé existenci do odborného výzkumu. Oblast folklorismu se někdy překrývala s existujícími lidovými tradicemi, někdy na ně navazovala a někdy se jimi pouze v různé míře inspirovala. Rozlišení v takto vymezených kategoriích nebylo snadné ani v minulosti a s příchodem stále rychlejším vývojem společnosti se v obecném povědomí rozostřilo. V tomto rámci vznikl současný široký hudební žánr zakořeněný v hudebním folkloru, který není snadné obsahově vymezit. Příspěvek nastiňuje průběh jeho historického formování, ukazuje modelové momenty jeho vývoje a zabývá se jeho polyfunkčností: mnoho kolektivů se prezentuje nejen na jevišti (spolu s tanečníky) a v hudebních pořadech. koncertním prostředí (samostatně), podílí se ale také na místních etnokulturních tradicích, tanečních zábavách, rodinných oslavách (svatby, narozeniny) a komerčně zaměřených akcích. akce. K ilustraci popsaných faktů článek využívá archivní pramenný materiál a terénní výzkum založený na základě rozhovorů s vybranými hudebníky From the 1960s onwards, efforts began to develop in Czech ethnology, which gradually began to include folklore manifestations in their second existence in professional research. The field of folklorism sometimes overlapped with the existence of folk traditions, sometimes built on them, and sometimes was only inspired by them to varying degrees. The distinction in such defined categories was not easy even in the past, and with the increasingly rapid development of society, it became blurred in the general consciousness. Within this scope, a contemporary broad music genre, music folklore, has emerged that is not easy to define in terms of content. In this paper, the authors outline its historical formation, show model moments of its development, and deal with its polyfunctionality: many collectives present themselves not only on stage (together with dancers) and in concert settings (independently), but also participate in local ethno-cultural traditions, dance parties, family celebrations (weddings, birthdays), and commercially focused events. To illustrate this, the paper uses archival source material, and field research based on interviews with selected musicians.
Keywords:
Music folklore; transformations of folk tradition; music genre; folk revivalism in the Czech Republic
Fulltext is available at external website.
Proměny interpretace hudebního folkloru: od ochrany každodenní kultury po vznik hudebního žánru (na příkladu České republiky)
Od 60. let 20. století se v české etnologii začaly rozvíjet snahy, které postupně začaly zařazovat projevy folkloru v jejich druhé existenci do odborného výzkumu. Oblast folklorismu se někdy ...
NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web
Send your suggestions and comments to nusl@techlib.cz
Provider
Other bases