Number of found documents: 3820
Published from to

SMV-2023-03: Držák autoemisních katod
Knápek, Alexandr; Horáček, Miroslav; Klein, Pavel
2023 - Czech
Smluvní výzkum (SMV) se zabývá vývojem modulárního držáku pro vývoj a testování auto-emisních katod v podmínkách ultra-vysokého vakua. Výzkum kombinuje znalosti z vakuové techniky, silnoproudé elektrotechniky a povrchové fyziky k dosažení spolehlivého zařízení, které umožňuje pracovat s polně-emisními katodami ve vakuových podmínkách, a to v diodové a triodové konfiguraci. Hlavním výstupem pro objednavatele je výkresová dokumentace, která umožňuje aparaturu replikovat a dále jeden kus funkčního prototypu, který byl v rámci SMV zkonstruován k ověření funkcionality. The contract research (CR) deals with the development of a modular holder for the development and testing of field-emission cathodes under ultra-high vacuum conditions. The research combines knowledge from vacuum engineering, power electronics and surface physics to achieve a reliable device that allows working with field-emission cathodes under vacuum conditions in diode and triode configurations. The main deliverables for the customer are drawings that allow the apparatus to be replicated and one piece of working prototype that has been constructed within the CR to verify the function. Keywords: field-emission cathode holder; relief structure; modular holder Available at various institutes of the ASCR
SMV-2023-03: Držák autoemisních katod

Smluvní výzkum (SMV) se zabývá vývojem modulárního držáku pro vývoj a testování auto-emisních katod v podmínkách ultra-vysokého vakua. Výzkum kombinuje znalosti z vakuové techniky, silnoproudé ...

Knápek, Alexandr; Horáček, Miroslav; Klein, Pavel
Ústav přístrojové techniky, 2023

Zhodnocení rizik ovlivnění povrchu terénu z hlediska geomechanických změn horninového masívu při zatápění důlního prostředí ostravské a petřvaldské dílčí pánve OKR důlní vodou - závěrečná zpráva
Kajzar, Vlastimil
2023 - Czech
Útlum zbylých, dosud činných dolů OKD, a.s. bude znamenat zánik primárního důvodu čerpání důlních vod z dolů, kterým je zajištění bezpečnosti práce a provozu v podzemí. Zároveň se tím eliminuje potřeba udržování v současnosti stanovené hladiny důlních vod v již utlumené části ostravsko-karvinského revíru (OKR), tedy v ostravské (ODP) a petřvaldské (PDP) části OKR, kterou nyní zajišťují vodní jámy Jeremenko (ODP) a Žofie (PDP). Po ukončení veškerých aktivit v podzemí OKR by tak mohl být spuštěn proces zatápění opuštěných důlních prostor. Cílem této práce je stanovit možná rizika způsobená geomechanickými a reologickými změnami v horninovém masívu, porušeném hornickou činností a především s tím spojená možná rizika ovlivnění zemského povrchu. Attenuation of the remaining, still active mines of OKD company will mean the end of the primary reason for pumping mine water from mines, which is to ensure the safety of work and operation underground. At the same time, this eliminates the need to maintain the currently determined level of mine water in the already attenuated part of the Ostrava-Karviná district (OKR), i.e. in the Ostrava (ODP) and Petřvald (PDP) parts of the OKR, which are now ensured by the Jeremenko (ODP) and Žofie (PDP) water shafts. After the end of all activities in the OKR underground, the process of flooding of the abandoned mine could be started. The aim of this work is to determine the possible risks caused by geomechanical and rheological changes in the rock massif disturbed by mining activity and, above all, the associated possible risks of affecting the earth's surface. Keywords: risks of the terrain surface influencing; geomechanical changes; flooding of the mining environment Available on request at various institutes of the ASCR
Zhodnocení rizik ovlivnění povrchu terénu z hlediska geomechanických změn horninového masívu při zatápění důlního prostředí ostravské a petřvaldské dílčí pánve OKR důlní vodou - závěrečná zpráva

Útlum zbylých, dosud činných dolů OKD, a.s. bude znamenat zánik primárního důvodu čerpání důlních vod z dolů, kterým je zajištění bezpečnosti práce a provozu v podzemí. Zároveň se tím eliminuje ...

Kajzar, Vlastimil
Ústav geoniky, 2023

Palynologie vybraných vzorků z vrtu Dětřichov J2014 a vrtu Maletín 1
Svobodová, Marcela
2023 - Czech
Keywords: Cenomanian; palynology; palaeoenvironment; Bohemian Cretaceous Basin Available at various institutes of the ASCR
Palynologie vybraných vzorků z vrtu Dětřichov J2014 a vrtu Maletín 1

Svobodová, Marcela
Geologický ústav, 2023

GA 19-07635S: Outputs and Results
Rehák, Branislav
2023 - English
This manuscript aims to deliver a survey of results obtained during the solution of the project No. GA19-07635S of the Czech Science Foundation. The timespan dedicated to the work on this project was 1.3.2019 - 30.6.2022. The main area dealt with were\nnonlinear multi-agent systems and their synchronization, further, attention was paid to some auxiliary results in the area of nonlinear observers. This Report briefly introduces the Project, provides a summary of the results obtained and also sketches an outline how these results will be applied and extended in future. Keywords: multi-agent systems; nonlinear multi-agent systems; synchronization Fulltext is available at external website.
GA 19-07635S: Outputs and Results

This manuscript aims to deliver a survey of results obtained during the solution of the project No. GA19-07635S of the Czech Science Foundation. The timespan dedicated to the work on this project was ...

Rehák, Branislav
Ústav teorie informace a automatizace, 2023

Závěrečná zpráva o řešení projektu MPO čís. CZ.01.1.02/0.0/0.0ú20_321/0023673
Zolotarev, Igor; Pešek, Luděk; Gabriel, Dušan; Procházka, Pavel P.
2023 - Czech
Projektu MPO s názvem Vývoj rozvaděče pro těžké podmínky a snížení rizik ohrožení kritické infrastruktury byl zaměřen na výzkum, vývoj optimalizované konstrukce a zajištění konfigurační technologie pro opakovanou produkci různých variant modulárního systémového rozváděče pro použití v těžkých podmínkách a snížení rizik seizmického ohrožení, pro zajištění spolehlivosti kritické infrastruktury. Výstupem má být prototyp seizmicky robustního zařízení s dynamicky odlehčené konstrukce, vysokou spolehlivostí funkce sestavy rozvaděče a elektrovýzbroje a SW aplikace pro interaktivní návrhy a dokumentaci. The MIT project entitled Development of a switchgear for severe conditions and reduction of risks of critical infrastructure threat was focused on research, development of optimized design and provision of configuration technology for repeated production of different variants of modular system switchgear for use in severe conditions and reduction of risks of seismic threat, to ensure the reliability of critical infrastructure. The output is to be a prototype seismically robust device with a dynamically lightweight design, high reliability of switchgear and electrical equipment assembly function, and a software application for interactive design and documentation. Keywords: vibration; natural frequencies; modes of vibration; seismic resistance; dynamic properties of structures Available at various institutes of the ASCR
Závěrečná zpráva o řešení projektu MPO čís. CZ.01.1.02/0.0/0.0ú20_321/0023673

Projektu MPO s názvem Vývoj rozvaděče pro těžké podmínky a snížení rizik ohrožení kritické infrastruktury byl zaměřen na výzkum, vývoj optimalizované konstrukce a zajištění konfigurační technologie ...

Zolotarev, Igor; Pešek, Luděk; Gabriel, Dušan; Procházka, Pavel P.
Ústav termomechaniky, 2023

SMV-2023-05: DI2023
Matějka, Milan; Krátký, Stanislav; Meluzín, Petr; Košelová, Zuzana; Chlumská, Jana; Horáček, Miroslav; Kolařík, Vladimír; Knápek, Alexandr
2023 - Czech
Výzkum se soustředí na zkoumání a vývoj precizních kalibračních vzorků s reliéfními strukturami. Tyto vzorky jsou koncipovány pro kalibraci parametrů ve skenovacích elektronových mikroskopech (SEM). Testovací vzory umožňují ověření kvality zobrazovaní danou mikroskopickou technikou jako je celkové zvětšení, velikost zorného, rozlišení, deformace zobrazení v laterárních osách a další geometrická zkreslení. Pro přípravku jsou využívány precizní litografické techniky a další techniky vycházející z technologií zpracování křemíku z polovodičového průmyslu. Vývoj byl zaměřen na optimalizaci záznamu leptacích masek před přenosem obrazu do monokrystalické křemíkové podložky. The research focuses on the investigation and development of precise calibration samples with relief structures. These samples are designed for calibrating parameters in scanning electron microscopes (SEM). Test patterns allow verification of the imaging quality through microscopic techniques such as overall magnification, field of view size, resolution, deformation in lateral axes, and other geometric distortions. Precision lithographic techniques and other methods derived from silicon processing technologies in the semiconductor industry are employed for sample preparation. The development has been directed towards optimizing the recording of etching masks before transferring the image onto a monocrystalline silicon substrate. Keywords: relief structure; e-beam lithography; silicon etching; microlithography Available at various institutes of the ASCR
SMV-2023-05: DI2023

Výzkum se soustředí na zkoumání a vývoj precizních kalibračních vzorků s reliéfními strukturami. Tyto vzorky jsou koncipovány pro kalibraci parametrů ve skenovacích elektronových mikroskopech (SEM). ...

Matějka, Milan; Krátký, Stanislav; Meluzín, Petr; Košelová, Zuzana; Chlumská, Jana; Horáček, Miroslav; Kolařík, Vladimír; Knápek, Alexandr
Ústav přístrojové techniky, 2023

Výpočty výměníku mezi primárním okruhem a meziokruhem malého modulárního reaktoru DAVID
Kobylka, D.; Hrubý, Jan; Kordík, Jozef; Gabriel, Dušan; Marek, René; Isoz, Martin
2023 - Czech
The report summarizes the joint results of the Department of Nuclear Reactors FNSPE, CTU and IT CAS, in the area of thermal and hydraulic calculations of the heat exchanger between the primary and intermediate circuits of the developed small modular reactor (SMR) DAVID. The assignment parameters were further specified during control days and with updated documentation. During the analysis of the initial system parameters, it was found that the original geometric configuration of the exchanger had a completely insufficient surface for heat transfer. A decision was made, several parameters were modified and based on a series of calculations using two independent simplified models, a reasonable configuration with a significantly smaller diameter of the tubes in a significantly larger number was chosen. The pressure losses on both sides of the heat exchanger are within normal ranges and will not cause problems with the construction of these circuits. Although there are differences between the results from both used models, their comparison shows that the chosen different calculation methods lead to approximately the same results and the models do not show fundamental errors. Keywords: small modular reactor DAVID; thermodynamics; heat exchanger Available at various institutes of the ASCR
Výpočty výměníku mezi primárním okruhem a meziokruhem malého modulárního reaktoru DAVID

The report summarizes the joint results of the Department of Nuclear Reactors FNSPE, CTU and IT CAS, in the area of thermal and hydraulic calculations of the heat exchanger between the primary and ...

Kobylka, D.; Hrubý, Jan; Kordík, Jozef; Gabriel, Dušan; Marek, René; Isoz, Martin
Ústav termomechaniky, 2023

Optical and Pneumatic Measurements on TR-U-11 Cascade
Luxa, Martin; Hála, Jindřich; Šimurda, David
2023 - English
The report contains results and evaluation of conducted optical (interferometry and schlieren technique) and pneumatic measurements on the first variant of the new tip section, intended for turbine rotor blade. Keywords: transonic flow; rotor turbine blade; tip section Available at various institutes of the ASCR
Optical and Pneumatic Measurements on TR-U-11 Cascade

The report contains results and evaluation of conducted optical (interferometry and schlieren technique) and pneumatic measurements on the first variant of the new tip section, intended for turbine ...

Luxa, Martin; Hála, Jindřich; Šimurda, David
Ústav termomechaniky, 2023

Posouzení výpočtové dokumentace zaměřené na hodnocení analýzy dopadu zvýšení výkonu bloků EDU II na vertikální stabilitu a dynamickou odezvu vnitřních částí reaktoru včetně uvažování nehody LOCA DN500
Pták, Svatopluk
2023 - Czech
Tato technická zpráva shrnuje výsledky posouzení výpočtové dokumentace zaměřené na hodnocení analýzy dopadu zvýšení výkonu bloků EDU II v souvislosti s projektem '6729 − Využití projektových rezerv bloků EDU II' na vertikální stabilitu a dynamickou odezvu vnitřních částí reaktoru včetně uvažování nehody LOCA DN500, konkrétně se jedná o posouzení dvou zpráv autorských kolektivů z ÚJV, a. s.: 'M. Klemenc a P. Gál: Analýzy dopadu zvýšení výkonu na dynamické chování VČR při nehodě LOCA DN500, zpráva ÚJV DITI 2301/1242, 12/2020' a M. Švrček a J. Vyčichl: Analýzy dopadu zvýšení výkonu na vertikální stabilitu a vibrační odezvu (vysokocyklovou únavu) VČR, zpráva ÚJV DITI 2301/1307, 08/2021. This technical report summarizes the results of the assessment aimed at evaluation of the impact analysis of the increase in the performance of EDU II units in connection with the project '6729 - Use of design margins of the Dukovany reactor units' on the vertical stability and dynamic response of the reactor internal components, including consideration of the LOCA DN500 event, specifically, it is an assessment of two reports of author collectives from ÚJV, a. s.: M. Klemenc and P. Gál: 'Analyzes of the impact of the power increase on the dynamic behavior of RIC during the LOCA DN500 event, report ÚJV DITI 2301/1242, 12/2020 and M. Švrček a J. Vyčichl: 'Analyzes of the impact of increasing power on vertical stability and vibration response (high-cycle fatigue) of RIC', report ÚJV DITI 2301/1307, 08/2021. Keywords: loss coolant accident; dynamic response; primary pipelime of nuclear reactor; internal parts of nuclear reactor Available at various institutes of the ASCR
Posouzení výpočtové dokumentace zaměřené na hodnocení analýzy dopadu zvýšení výkonu bloků EDU II na vertikální stabilitu a dynamickou odezvu vnitřních částí reaktoru včetně uvažování nehody LOCA DN500

Tato technická zpráva shrnuje výsledky posouzení výpočtové dokumentace zaměřené na hodnocení analýzy dopadu zvýšení výkonu bloků EDU II v souvislosti s projektem '6729 − Využití projektových rezerv ...

Pták, Svatopluk
Ústav termomechaniky, 2023

Souhrnná zpráva zakázky OZM-LCF-2023: Experimentální hodnocení vlastností oceli 1.4529 z hlediska nízkocyklové únavy
Štefan, Jan; Parma, Slavomír
2023 - Czech
Tato technická zpráva byla zpracována v rámci zakázky „OZM-LCF-2023: Experimentální hodnocení vlastností oceli 1.4529 z hlediska nízkocyklové únavy“. Ve zprávě jsou přehledně zdokumentovány všechny podstatné informace týkající se odborného plnění zakázky počínaje návrhem experimentálního programu, přes protokoly o provedených experimentech až po souhrnné vyhodnocení programu vč. návrhů pro případné rozšíření zakázky a navazující experimentální činnost. This technical report was prepared within the framework of the contract "OZM-LCF-2023: Experimental evaluation of the properties of steel 1.4529 in terms of low cycle fatigue". The report clearly documents all relevant information concerning the technical performance of the contract, starting from the design of the experimental program, through the protocols of the experiments performed, to the summary evaluation of the program, including proposals for possible contract extension and follow-up experimental activities. Keywords: material testing; low-cycle fatigue; austenitic stainless steels Available at various institutes of the ASCR
Souhrnná zpráva zakázky OZM-LCF-2023: Experimentální hodnocení vlastností oceli 1.4529 z hlediska nízkocyklové únavy

Tato technická zpráva byla zpracována v rámci zakázky „OZM-LCF-2023: Experimentální hodnocení vlastností oceli 1.4529 z hlediska nízkocyklové únavy“. Ve zprávě jsou přehledně zdokumentovány všechny ...

Štefan, Jan; Parma, Slavomír
Ústav termomechaniky, 2023

About project

NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web

Send your suggestions and comments to nusl@techlib.cz

Provider

http://www.techlib.cz

Facebook

Other bases