Number of found documents: 8560
Published from to

SMV-2023-36: Wuhan Space
Hrabina, Jan; Holá, Miroslava; Oulehla, Jindřich; Pokorný, Pavel; Lazar, Josef; Šarlejová, Tatiana; Šlechtický, Stanislav
2023 - Czech
Smluvní výzkum byl zaměřen na vývoj reference optického kmitočtů pro frekvenční stabilizaci kompaktních laserových zdrojů. Tato optická reference je založena na bázi absorpční kyvety plněných čistými plyny a dovoluje stabilizaci laserových zdrojů pomocí metod laserové spektroskopie. Kyveta je určena k použití jako reference optických kmitočtů laserové normály pracující v pásmu vlnových délek 532-633 nm. The contractual research was oriented towards the development of optical frequency reference intended for the frequency stabilisation of ultra-compact semiconductor laser sources. This optical reference is based on an absorption cell filled with ultra-pure absorption gases, and it allows precise locking of the lasers with laser spectroscopy methods. The cell will serve as a reference of optical frequencies in systems of laser standards (532-633 nm wavelengths). Keywords: absorption cell; iodine cell; laser spectroscopy; stabilised laser; frequency stability Available at various institutes of the ASCR
SMV-2023-36: Wuhan Space

Smluvní výzkum byl zaměřen na vývoj reference optického kmitočtů pro frekvenční stabilizaci kompaktních laserových zdrojů. Tato optická reference je založena na bázi absorpční kyvety plněných čistými ...

Hrabina, Jan; Holá, Miroslava; Oulehla, Jindřich; Pokorný, Pavel; Lazar, Josef; Šarlejová, Tatiana; Šlechtický, Stanislav
Ústav přístrojové techniky, 2023

SMV-2023-01: Reliéfní struktury na principu diftraktivní optiky
Horáček, Miroslav; Kolařík, Vladimír; Matějka, Milan; Krátký, Stanislav; Chlumská, Jana; Meluzín, Petr; Král, Stanislav
2023 - Czech
Výzkum a vývoj v oblasti fyzikální realizace grafických a optických struktur na principu difraktivní optiky prostředky elektronové litografie v záznamovém materiálu neseném křemíkovou nebo skleněnou deskou. Výzkum zahrnuje analýzu grafického resp. optického motivu, výzkum a aplikaci reliéfních struktur realizujících požadované grafické resp. optické vlastnosti, výzkum a modelování možností fyzikální realizace reliéfních struktur, vypracování a analýzu technologie realizace reliéfní struktury s ohledem na limity současných vědeckých přístrojů, ověření teoretických úvah expozicí vzorku reliéfní struktury. Research and development in the field of physical realization of graphic and optical structures based on the principle of diffractive optics by means of electron beam lithography in a recording material supported by a silicon or glass board. The research covers the analysis of the graphical or optical motive, research and application of relief structures implementing the required graphic and optical properties, research and modeling of the physical possibilities of implementation of relief structures, preparation and analysis of technology of implementation of relief structures with regard to the limits of current scientific instruments, verification of theoretical considerations by means of relief structure sample exposure. Keywords: diffractive optical structures; relief structure; e-beam lithography Available at various institutes of the ASCR
SMV-2023-01: Reliéfní struktury na principu diftraktivní optiky

Výzkum a vývoj v oblasti fyzikální realizace grafických a optických struktur na principu difraktivní optiky prostředky elektronové litografie v záznamovém materiálu neseném křemíkovou nebo skleněnou ...

Horáček, Miroslav; Kolařík, Vladimír; Matějka, Milan; Krátký, Stanislav; Chlumská, Jana; Meluzín, Petr; Král, Stanislav
Ústav přístrojové techniky, 2023

SMV-2023-37: Projekt CRYSA - kryostat sondy 2
Frolec, Jiří
2023 - Czech
Cílem celého projektu CRYSA je výběr a testování tří kompozitních materiálů vhodných pro uchycení zařízení na velmi nízké teplotě (kryostatu), jež bude součástí chystané vesmírné sondy Athena od Evropské kosmické agentury (ESA). Na projektu spolupracuje skupina Kryogeniky a supravodivosti z Ústavu přístrojové techniky (ÚPT), firmy OHB Czechspace, 5M s.r.o. a Ústav fyziky materiálů AV ČR. Uvedené smluvní výzkumy se v r. 2023 v ÚPT zaměřily na dílčí cíle projektu. Konkrétně byl finalizován výběr tří nejlepších materiálů, které budou v budoucnu testovány, byly vypracovány detailní postupy pro plánované měření tepelných vodivostí vzorků a metoda jejich teplotního cyklování za nízkých teplot. Pracovníky skupiny Kryogenika a supravodivost byla také provedena optimalizace měřící aparatury a změřeny tepelné vodivosti několika cvičných vzorků. Výstupy tohoto projektu pomohou ESA s výběrem optimálního materiálu pro konstrukci závěsů uvedeného kryostatu pro dalekohled Athena. The goal of the project CRYSA is the selection and testing of three composite materials suitable for fixation of a low temperature device (cryostat), which will be part of the upcoming Athena space probe from the European Space Agency (ESA). The Cryogenics and Superconductivity group at the Institute of Scientific Instruments of the Czech Academy of Sciences (ISI Brno), OHB Czechspace, 5M s.r.o. and the Institute of Physics of Materials of the CAS (IPM) collaborate on this project. The aforementioned contractual researches carried out at ISI Brno in 2023 were focused on the partial goals of the project. Specifically, the selection of the three best materials, which will be tested in the future, was finalized. Further, detailed procedures for the planned measurements of the thermal conductivity of the samples and the method of their temperature cycling at low temperatures were developed. The members of the Cryogenics and Superconductivity Group also performed optimization of the measuring devices and measured thermal conductivities of several dummy samples. The outputs of this project will help ESA with the selection of the optimal material for the construction of the mechanical supports for the cryostat in the Athena telescope. Keywords: thermal conductivity; cryogenics; space probe; Athena Available at various institutes of the ASCR
SMV-2023-37: Projekt CRYSA - kryostat sondy 2

Cílem celého projektu CRYSA je výběr a testování tří kompozitních materiálů vhodných pro uchycení zařízení na velmi nízké teplotě (kryostatu), jež bude součástí chystané vesmírné sondy Athena od ...

Frolec, Jiří
Ústav přístrojové techniky, 2023

Key barriers, opportunities and good practices for entrepreneurship and innovation
Křížková, Alena; Marková Volejníčková, Romana; Pospíšilová, Marie; Vohlídalová, Marta
2023 - English
The report is focused on barriers, opportunities and good practices for gender-sensitive innovations and entrepreneurship. It is based on the analysis of 36 interviews with experts from the health, green and digital fields and the target groups defined in the quadruple helix of academia, citizens, industry, and government. The interviews were collected by 12 GILL partners in the 10 consortium countries in 2023. Gender stereotypical cultural beliefs and norms, masculine bias, gender segregation, lack of funding, lack of policies to support work-life balance and lack of political will and empirical evidence to remove these barriers are the main problems identified. The opportunities reflected largely correspond to these barriers and highlight the role of key actors, such as the EU, in setting standards. Projects focusing on fixing the number of women under-represented in certain fields and occupations and management positions predominate among good practices. Keywords: .gender equality; gender in entrepreneurship; gender in science; gender in innovation; gender stereotypes; good practices Available in digital repository of the ASCR
Key barriers, opportunities and good practices for entrepreneurship and innovation

The report is focused on barriers, opportunities and good practices for gender-sensitive innovations and entrepreneurship. It is based on the analysis of 36 interviews with experts from the health, ...

Křížková, Alena; Marková Volejníčková, Romana; Pospíšilová, Marie; Vohlídalová, Marta
Sociologický ústav, 2023

Posouzení výpočtové dokumentace zaměřené na hodnocení analýzy dopadu zvýšení výkonu bloků EDU II na vertikální stabilitu a dynamickou odezvu vnitřních částí reaktoru včetně uvažování nehody LOCA DN500
Pták, Svatopluk
2023 - Czech
Tato technická zpráva shrnuje výsledky posouzení výpočtové dokumentace zaměřené na hodnocení analýzy dopadu zvýšení výkonu bloků EDU II v souvislosti s projektem '6729 − Využití projektových rezerv bloků EDU II' na vertikální stabilitu a dynamickou odezvu vnitřních částí reaktoru včetně uvažování nehody LOCA DN500, konkrétně se jedná o posouzení dvou zpráv autorských kolektivů z ÚJV, a. s.: 'M. Klemenc a P. Gál: Analýzy dopadu zvýšení výkonu na dynamické chování VČR při nehodě LOCA DN500, zpráva ÚJV DITI 2301/1242, 12/2020' a M. Švrček a J. Vyčichl: Analýzy dopadu zvýšení výkonu na vertikální stabilitu a vibrační odezvu (vysokocyklovou únavu) VČR, zpráva ÚJV DITI 2301/1307, 08/2021. This technical report summarizes the results of the assessment aimed at evaluation of the impact analysis of the increase in the performance of EDU II units in connection with the project '6729 - Use of design margins of the Dukovany reactor units' on the vertical stability and dynamic response of the reactor internal components, including consideration of the LOCA DN500 event, specifically, it is an assessment of two reports of author collectives from ÚJV, a. s.: M. Klemenc and P. Gál: 'Analyzes of the impact of the power increase on the dynamic behavior of RIC during the LOCA DN500 event, report ÚJV DITI 2301/1242, 12/2020 and M. Švrček a J. Vyčichl: 'Analyzes of the impact of increasing power on vertical stability and vibration response (high-cycle fatigue) of RIC', report ÚJV DITI 2301/1307, 08/2021. Keywords: loss coolant accident; dynamic response; primary pipelime of nuclear reactor; internal parts of nuclear reactor Available at various institutes of the ASCR
Posouzení výpočtové dokumentace zaměřené na hodnocení analýzy dopadu zvýšení výkonu bloků EDU II na vertikální stabilitu a dynamickou odezvu vnitřních částí reaktoru včetně uvažování nehody LOCA DN500

Tato technická zpráva shrnuje výsledky posouzení výpočtové dokumentace zaměřené na hodnocení analýzy dopadu zvýšení výkonu bloků EDU II v souvislosti s projektem '6729 − Využití projektových rezerv ...

Pták, Svatopluk
Ústav termomechaniky, 2023

Souhrnná zpráva zakázky OZM-LCF-2023: Experimentální hodnocení vlastností oceli 1.4529 z hlediska nízkocyklové únavy
Štefan, Jan; Parma, Slavomír
2023 - Czech
Tato technická zpráva byla zpracována v rámci zakázky „OZM-LCF-2023: Experimentální hodnocení vlastností oceli 1.4529 z hlediska nízkocyklové únavy“. Ve zprávě jsou přehledně zdokumentovány všechny podstatné informace týkající se odborného plnění zakázky počínaje návrhem experimentálního programu, přes protokoly o provedených experimentech až po souhrnné vyhodnocení programu vč. návrhů pro případné rozšíření zakázky a navazující experimentální činnost. This technical report was prepared within the framework of the contract "OZM-LCF-2023: Experimental evaluation of the properties of steel 1.4529 in terms of low cycle fatigue". The report clearly documents all relevant information concerning the technical performance of the contract, starting from the design of the experimental program, through the protocols of the experiments performed, to the summary evaluation of the program, including proposals for possible contract extension and follow-up experimental activities. Keywords: material testing; low-cycle fatigue; austenitic stainless steels Available at various institutes of the ASCR
Souhrnná zpráva zakázky OZM-LCF-2023: Experimentální hodnocení vlastností oceli 1.4529 z hlediska nízkocyklové únavy

Tato technická zpráva byla zpracována v rámci zakázky „OZM-LCF-2023: Experimentální hodnocení vlastností oceli 1.4529 z hlediska nízkocyklové únavy“. Ve zprávě jsou přehledně zdokumentovány všechny ...

Štefan, Jan; Parma, Slavomír
Ústav termomechaniky, 2023

Measurements on KR-D-11B Optimized Subsonic Blade Cascade
Šimurda, David; Hála, Jindřich
2023 - English
This report contains results and evaluation of aerodynamic measurements conducted on a subsonic compressor blade cascade. Keywords: compressor blade cascade; experiment; subsonic flow; optimized profile Available at various institutes of the ASCR
Measurements on KR-D-11B Optimized Subsonic Blade Cascade

This report contains results and evaluation of aerodynamic measurements conducted on a subsonic compressor blade cascade.

Šimurda, David; Hála, Jindřich
Ústav termomechaniky, 2023

Analýza malty z 19. století
Bauerová, Pavla; Frankeová, Dita; Slížková, Zuzana; Vondráčková, Michaela
2023 - Czech
Chemické a mineralogické složení pojiva a plniva malty pomocí elektronové mikroskopie (SEM-EDS) a termické analýzy Chemical and mineralogical composition of the binder and the aggregates of the mortar, using SEM-EDS and thermal analysis Keywords: SEM-EDS analysis; historic mortar; hydraulic lime; decalcification; carbonatization Available at various institutes of the ASCR
Analýza malty z 19. století

Chemické a mineralogické složení pojiva a plniva malty pomocí elektronové mikroskopie (SEM-EDS) a termické analýzy...

Bauerová, Pavla; Frankeová, Dita; Slížková, Zuzana; Vondráčková, Michaela
Ústav teoretické a aplikované mechaniky, 2023

2TDK Railway, profile P18. Datings. Final Report.
Bosák, Pavel; Zupan Hajna, N.; Hercman, H.; Horáček, I.; Kdýr, Šimon; Kogovšek, B.
2023 - English
Samples for datings were taken in the railway construction (2TDK) near village of Divača, Classical Karst on October 12, 2021: (1) vertebrate bones in cave 2TDK – 002 at the profile P18, cave entrance appeared during the construction operations on cleaned karst surface in a wall of karst depression. Samples of mammal bones and gastropods were collected in situ on cave bottom, and (2) pieces of speleothems occurring in non in situ position on artificially planated surface near the cave opening were collected. U-series: no numerical date was obtained as geochemistry of sample indicate open system, probably due to recrystallization of sample in soil cover. Paleomagnetism: The transition of N- and R-polarized samples cannot be identified more precisely as U-series radiometric dating yielded no numerical results. The transition easily can represent Brunhes/Matuyama boundary (at 773 ka) as well as any of older such transitions (e. g., base of Jaramillo, base of Olduvai). In any case the speleothem grew in a closed cave space with roof, probably as flowstone (inclusion of red soils above the base) and later as baldachin on eroded allogenic fill of the paleocave. Vertebrate paleontology: bone remains of small and larger vertebrates represent subrecent to Holocene species. Sorex alpinus represents the species quite rare in fossil record, but recetly limited to variegated woodland habitats with high surface humidity. A chamois Rupicapra rupicapra represents a resident species present in Slovenia throughout all stages of a glacial cycle, recently restricted to mountain habitats. Keywords: Divača Karst; unroofed cave; speleothem; U-Th dating; paleomagnetism; zoopaleontology Available at various institutes of the ASCR
2TDK Railway, profile P18. Datings. Final Report.

Samples for datings were taken in the railway construction (2TDK) near village of Divača, Classical Karst on October 12, 2021: (1) vertebrate bones in cave 2TDK – 002 at the profile P18, cave entrance ...

Bosák, Pavel; Zupan Hajna, N.; Hercman, H.; Horáček, I.; Kdýr, Šimon; Kogovšek, B.
Geologický ústav, 2023

Inflation expectations in the wake of the war in Ukraine
Afunts, Geghetsik; Cato, M.; Schmidt, T.
2023 - English
Russia's invasion of Ukraine is posing a range of new challenges to the global economy, including affecting the inflation expectations of individuals. In this paper, we aim to quantify the effect of the invasion on short- and long-term inflation expectations of individuals in Germany. We use microdata from the Bundesbank Online Panel - Households (BOP-HH), for the period from February 15th to March 29th, 2022. Treating the unanticipated start of the war in Ukraine on the 24th of February 2022 as a natural experiment, we find that both short- and long-term inflation expectations increased as an immediate result of the invasion. Long-term inflation expectations increased by around 0.4 percentage points, while the impact on short-term inflation expectations was more than twice as large - around one percentage point. Looking into the possible mechanisms of this increase, we suggest that it can be partially attributed to individuals’ fears of soaring energy prices and increasing pessimism about economic trends in general. Our results indicate that large economic shocks can have a substantial impact on both short and long-term inflation expectations. Keywords: inflation expectations; Russian invasion of Ukraine; survey Fulltext is available at external website.
Inflation expectations in the wake of the war in Ukraine

Russia's invasion of Ukraine is posing a range of new challenges to the global economy, including affecting the inflation expectations of individuals. In this paper, we aim to quantify the effect of ...

Afunts, Geghetsik; Cato, M.; Schmidt, T.
Národohospodářský ústav, 2023

About project

NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web

Send your suggestions and comments to nusl@techlib.cz

Provider

http://www.techlib.cz

Facebook

Other bases