Počet nalezených dokumentů: 620
Publikováno od do

Local velocity scaling in upward flow to tooth impeller in a fully turbulent region
Šulc, R.; Ditl, P.; Fořt, I.; Jašíková, D.; Kotek, M.; Kopecký, V.; Kysela, Bohuš
2018 - anglický
The hydrodynamics and flow field were measured in an agitated vessel using 2-D Time Resolved Particle Image Velocimetry (2-D TR PIV). The experiments were carried out in a fully baffled cylindrical flat bottom vessel 400 mm in inner diameter agitated by a tooth impeller 133 mm in diameter. Distilled water was used as the agitated liquid. The velocity fields were investigated in the upward flow to the impeller for three impeller rotation speeds – 300 rpm, 500 rpm and 700 rpm, corresponding to a Reynolds number in the range 94 000 < Re < 221 000. This means that fully-developed turbulent flow was reached. This Re range secures the fully-developed turbulent flow in an agitated liquid. In accordance with the theory of mixing, the dimensionless mean and fluctuation velocities in the measured directions were found to be constant and independent of the impeller Reynolds number. On the basis of the test results the spatial distributions of dimensionless velocities were calculated. The axial turbulence intensity was found to be in the majority in the range from 0.4 to 0.7, which corresponds to the middle level of turbulence intensity. Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Local velocity scaling in upward flow to tooth impeller in a fully turbulent region

The hydrodynamics and flow field were measured in an agitated vessel using 2-D Time Resolved Particle Image Velocimetry (2-D TR PIV). The experiments were carried out in a fully baffled cylindrical ...

Šulc, R.; Ditl, P.; Fořt, I.; Jašíková, D.; Kotek, M.; Kopecký, V.; Kysela, Bohuš
Ústav pro hydrodynamiku, 2018

Droplets breakage in flow conditions of an agitated tank
Kysela, Bohuš; Konfršt, Jiří; Chára, Zdeněk; Šulc, R.; Kotek, M.
2018 - anglický
Production of two immiscible liquid dispersions used in chemical or metallurgical industry is usually performed by a mixing process. The droplets of secondary liquid are predominantly dispersed by the shear flow forces to the primary liquid. It is well known, that the real droplet size distribution is limited by the physical properties of both liquids, the acting forces and residence time. This phenomenon is investigated experimentally or numerically simulated by several methods. In this study, the simplified mixing test case was studied. The single droplet dispergation was simulated using finite volume method and multiphase VOF (Volume-of-Fluid) model. The capability of the local remeshing method was investigated. The increase of calculation performance and the phases mass imbalance during automatic mesh refinement is summarized. Klíčová slova: immiscible liquid dispersion; mixing process; droplet size distribution Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Droplets breakage in flow conditions of an agitated tank

Production of two immiscible liquid dispersions used in chemical or metallurgical industry is usually performed by a mixing process. The droplets of secondary liquid are predominantly dispersed by the ...

Kysela, Bohuš; Konfršt, Jiří; Chára, Zdeněk; Šulc, R.; Kotek, M.
Ústav pro hydrodynamiku, 2018

Plasty v pitné vodě
Čermáková, Lenka; Novotná, Kateřina; Peer, Petra; Janda, V.; Pivokonský, Martin
2018 - český
Výzkum byl zaměřen na výskyt mikroplastů ve zdrojích vody a v samotné pitné vodě. V poslední době je téma výskytu plastů ve vodě velice aktuální. Většina prací je včak zaměřena na kvantifikaci mikroplastů ve vodě mořské, sedimentech či povrchových vodách, které nejsou zdrojem surové vody pro úpravu na vodu pitnou, a zároveň se téměř vždy zabývají analýzou částic ve velikostním rozmezí 0,3-5 mm. Předmětem předkládané studie bylo kvantifikovat mikroplasty již od velikosti 0,2 μm, a to v surové a upravené vodě ze třech nejmenovaných úpraven vody v České republice, určit jejich velikostní distribuci, tvar a materiálové složení. Bylo zjištěno, že v závislosti na zdroji vody a technologii dané úpravny se počet mikroplastů pohyboval v rozmezí 1414-7006 částic I-1 v surové vodě a 305-921 částic I-1 ve vodě upravené. Velikostně dominovaly částice menší než 10 μm a tvarově ve dvou zdrojích fragmenty a v jednom zdroji vlákna. Z hlediska materiálového složení analyzovaných mikroplastů převládal poyethylentereftalát a polypropylén. The research was focused on microplastics occurring in water sources and in drinking water. Recently, the topic of microplastics in water is very up to date. However, most of the studies are focused on quantification of microplastics in sea water, sediments or surface waters, which are not a source of raw water for drinking water treatment, and at the same time the most of studies deal with the analysis of particles in the size range of 0.3 - 5 mm. The subject of the present study was to quantify microplastics from 0.2 μm in raw and treated water from three unnamed water treatment plants in the Czech Republic and to determine their size distribution, shape and material composition. It has been found that the number of microplastics ranged from 1414-7006 L-1 particles in raw water and 305-921 L-1 particles in treated water. Microplastics smaller than 10 μm were the most plentiful in both raw and treated water samples. Fragments clearly prevailed at two of the water treatment plants and fibres together with fragments predominated at one case. Klíčová slova: microplastics; drinking water; water treatment; raw water Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Plasty v pitné vodě

Výzkum byl zaměřen na výskyt mikroplastů ve zdrojích vody a v samotné pitné vodě. V poslední době je téma výskytu plastů ve vodě velice aktuální. Většina prací je včak zaměřena na kvantifikaci ...

Čermáková, Lenka; Novotná, Kateřina; Peer, Petra; Janda, V.; Pivokonský, Martin
Ústav pro hydrodynamiku, 2018

32nd Symposium on anemometry: proceedings
Chára, Zdeněk; Klaboch, L.
2018 - český
Sborník z konference 32nd symposium o anemometrii. Konference byla zaměřena na experimentální techniky používané v mechanice tekutin. Proceedings of 32nd Symposium on Anemometry. The conference was oriented on the experimental techniques applied in fluid mechanics. Klíčová slova: anemometry; conference; proceedings Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
32nd Symposium on anemometry: proceedings

Sborník z konference 32nd symposium o anemometrii. Konference byla zaměřena na experimentální techniky používané v mechanice tekutin....

Chára, Zdeněk; Klaboch, L.
Ústav pro hydrodynamiku, 2018

Posouzení stavu a instalace rozvodů vody s ohledem na objasnění výskytu zavzdušnění napájecího řadu pastéru a provzdušnění piva v pivovaru Vyškov
Konfršt, Jiří
2018 - český
Technická zpráva se zabývá problematikou zavzdušnění přívodního potrubí pastéru v pivovaru ve Vyškově. Hodnotí se celkový stav rozvodů pivovaru, je proveden výpočet tlakových ztrát s cílem stanovení tlaku vody na sací straně čerpadla pastéru. Analyzovány jsou provozní stavy, při kterých by mohlo dojít k přisátí vzduch do vodního rozvodu pivovaru. The Technical report deals with the pasteurizer water supply air intrusion at the Vyškov brewery. Assessment of pipeline system installation condition has been done, pressure loss has been calculated, the pressure in the suction part of pasteurizer pump has been specified. Brewery water pipeline operational conditions has been analysed with the goal to find the cause why the air gets sucked in to water pipeline nets. Klíčová slova: water pipeline net; pasteurizer water supply; aeration of beer Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Posouzení stavu a instalace rozvodů vody s ohledem na objasnění výskytu zavzdušnění napájecího řadu pastéru a provzdušnění piva v pivovaru Vyškov

Technická zpráva se zabývá problematikou zavzdušnění přívodního potrubí pastéru v pivovaru ve Vyškově. Hodnotí se celkový stav rozvodů pivovaru, je proveden výpočet tlakových ztrát s cílem stanovení ...

Konfršt, Jiří
Ústav pro hydrodynamiku, 2018

Vliv organických látek na charakter agregátů tvořených koagulací/flokulací při úpravě vody
Filipenská, Monika; Pivokonská, Lenka; Vašatová, Petra; Pivokonský, Martin
2018 - český
Cílem práce bylo popsat vliv různých znečišťujících příměsí (kaolinitové částice, COM peptidy/proteiny a jejich směs) na velikost, velikostní distribuci, tvar a strukturu agregátů tvořených v proměnných hydrodynamických podmínkách (různá gradient rychlosti) v konečné fázi vývoje agregace, tzv. steady state. Jako míchací zařízení byl zvolen Taylor-Couettův reaktor, který umožňuje neinvazivní pozorování agregátů. Vlastnosti agregátů byly vyhodnocovány metodou obrazové analýzy. Bylo zjištěno, že velikost a tvar agregátů je závislá na typu koagulačního činidla, typu koagulované přímesi a aplikovaném gradientu rychlosti. Železité koagulační činidlo produkuje větší a méně pravidelné agregáty než činidlo hlinité. Podle příměsi roste velikost (zároveň klesá kompaktnost a roste neuspořádanost) agregátů v pořadí kaolinit < COM < kaolinit + COM. Bylo zjištěno, že velikost agregátů se na aplikovaném gradientu rychlosti nemění plynule, jak bylo doposud předpokládání, ale při překročení hodnoty tzv. kritických gradientů rychlosti, dochází k její prudké změně. Změny ve velikosti agregátů se liší v závislosti na charakteru koagulovaných příměsí a byly vysvětleny pomocí rozdílných interakcí mezi znečišťující příměsí a koagulačním činidlem. Characteristics of aggregates (size, shape, density and porosity) affect separation efficiency. These characteristics come from properties of impurities (molecular weight and structure, charge density, affinity to water, etc.), coagulation parameters (pH, type and concentration of coagulants, etc.) and by physical conditions (shear rate and time of mixing). In this work, we describe relations between the size of aggregates and shear rate and moreover dependency on the characteristics of coagulated compounds. In order to understand dependency on compounds, flocs formed by kaolinite, Algal Organic Matter (AOM) and a mixture of the same were studied. There was found aggregates are bigger and more porous when AOM is present. The most striking result is that aggregates size changes in dependence on shear rate are not smooth in progress. A rapid change for the kaolinite-coagulant suspension and two rapid changes for the suspensions containing AOM were observed. These were attributed to various intermolecular interactions between floc components participating in coagulation at the different shear rate. Klíčová slova: AOM; Algal Organic Matter; coagulation; aggregation; shear rate; aggregate structure; water treatment Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Vliv organických látek na charakter agregátů tvořených koagulací/flokulací při úpravě vody

Cílem práce bylo popsat vliv různých znečišťujících příměsí (kaolinitové částice, COM peptidy/proteiny a jejich směs) na velikost, velikostní distribuci, tvar a strukturu agregátů tvořených v ...

Filipenská, Monika; Pivokonská, Lenka; Vašatová, Petra; Pivokonský, Martin
Ústav pro hydrodynamiku, 2018

Analýza vzniku kritické situace ohrožení kulturního dědictví přírodní pohromou
Hnilicová, Soňa; Šípek, Václav
2018 - český
Analýza vzniku různých typů povodňových situací a hodnocení faktorů ovlivňující tvar povodňové vlny. Mechanismus komplexní protipovodňové ochrany včetně konkrétních opatření na území hl. m. Prahy. Floods are one of the most occurring natural hazards causing damage of cultural heritage. Factors influencing flood formation and the shape of flood wave are analysed. Mechanism of complex flood control protection is described including planned and realised measured in the capital city Prague. Klíčová slova: flood causing factor; flood wave; flood control protection Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Analýza vzniku kritické situace ohrožení kulturního dědictví přírodní pohromou

Analýza vzniku různých typů povodňových situací a hodnocení faktorů ovlivňující tvar povodňové vlny. Mechanismus komplexní protipovodňové ochrany včetně konkrétních opatření na území hl. m. ...

Hnilicová, Soňa; Šípek, Václav
Ústav pro hydrodynamiku, 2018

Dispersion kinetics in mechanically agitated vessel
Bucciarelli, E.; Formánek, R.; Kysela, Bohuš; Fořt, I.; Šulc, R.
2018 - anglický
Agitation of two immiscible liquids or solid-liquid suspension is a frequent operation in chemical and metallurgical industries. Prediction of mean drop/particle size and drop/particle size distribution (DSD) is vital for emulsification, suspension polymerization, solid particle dispersion or crystallization. Simulation of particulate systems requires the knowledge of DSD and its time evolution. The time evolution of drop size distribution was investigated in baffled vessel mechanically agitated by a Rushton turbine and a high-shear tooth impeller. The system water –silicone oil was used as a model liquid. The volume fraction of the dispersed phase was 0.047 %. The drop sizes were determined by image analysis. The time evolution of the drops size dp32 was studied for both impellers tested. The model used involves the first order kinetics. Finally, the following correlations predicted by the Kolmogorov-Hinze theory were evaluated at steady state: dp32/D = C1.We-0.6 and dpmax/D = C2.We-0.6, where We is the impeller Weber number. Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Dispersion kinetics in mechanically agitated vessel

Agitation of two immiscible liquids or solid-liquid suspension is a frequent operation in chemical and metallurgical industries. Prediction of mean drop/particle size and drop/particle size ...

Bucciarelli, E.; Formánek, R.; Kysela, Bohuš; Fořt, I.; Šulc, R.
Ústav pro hydrodynamiku, 2018

Measurement of drop size distribution time rate for liquid-liquid dispersion using IPI method
Jašíková, D.; Kotek, M.; Kysela, Bohuš; Šulc, R.; Kopecký, V.
2018 - anglický
The liquid-liquid dispersion properties are studied mainly by image analysis (IA) and Interferometric Particle Imaging (IPI). Drop sizes will be investigated in dilute dispersion since in this case the break up phenomena is the dominating and is not affected by phase fraction. Characteristics of the size distribution and the evolution of two liquid-liquid phase’s disintegration were studied. The IPI method was used for subsequent detailed study of the disintegrated droplets. We compared two liquids: Rhodosil Oil 47V50, and Silicone Oil AP1000 under stirrer rate of 540 rpm, and 760 rpm. The experiment run in the scaled model of agitated tank with Rushton turbine. Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Measurement of drop size distribution time rate for liquid-liquid dispersion using IPI method

The liquid-liquid dispersion properties are studied mainly by image analysis (IA) and Interferometric Particle Imaging (IPI). Drop sizes will be investigated in dilute dispersion since in this case ...

Jašíková, D.; Kotek, M.; Kysela, Bohuš; Šulc, R.; Kopecký, V.
Ústav pro hydrodynamiku, 2018

Vodní režim v minulosti a současnosti – postřehy k zamyšlení
Buchtele, Josef; Slámová, Romana; Chlumecký, M.
2018 - český
The variability of the water regime is ascertained as being influenced by the frequent natural evolutions in the span of decades and also by some abrupt changes in the recent periods, including the damages or grows of vegetation cover or human influence in the historical decades. Analysis of such natural or man-made impacts in the context of historical evolution could clarify uncertainties and oscillations in basin water regime. The events as changes in vegetation cover, resp. evapotranspiration, land-use changes, building of new reservoirs and disappearing the old ones, effect of water management changing the condition of the water supply should be evaluated taking into account the influencing of the natural water regime. The modeling of rainfall-runoff process could be used to identify such impacts, especially for the cases when the long term complex monitoring is missing. The difference between observed and simulated streams flow appears as the helpful tool for the assessments of the resulting water regime. The variability of the water regime is ascertained as being influenced by the frequent natural evolutions in the span of decades and also by some abrupt changes in the recent periods, including the damages or grows of vegetation cover or human influence in the historical decades. Analysis of such natural or man-made impacts in the context of historical evolution could clarify uncertainties and oscillations in basin water regime. The events as changes in vegetation cover, resp. evapotranspiration, land-use changes, building of new reservoirs and disappearing the old ones, effect of water management changing the condition of the water supply should be evaluated taking into account the influencing of the natural water regime. The modeling of rainfall-runoff process could be used to identify such impacts, especially for the cases when the long term complex monitoring is missing. The difference between observed and simulated streams flow appears as the helpful tool for the assessments of the resulting water regime. Klíčová slova: water regime; climate change; water resources Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Vodní režim v minulosti a současnosti – postřehy k zamyšlení

The variability of the water regime is ascertained as being influenced by the frequent natural evolutions in the span of decades and also by some abrupt changes in the recent periods, including the ...

Buchtele, Josef; Slámová, Romana; Chlumecký, M.
Ústav pro hydrodynamiku, 2018

O službě

NUŠL poskytuje centrální přístup k informacím o šedé literatuře vznikající v ČR v oblastech vědy, výzkumu a vzdělávání. Více informací o šedé literatuře a NUŠL najdete na webu služby.

Vaše náměty a připomínky posílejte na email nusl@techlib.cz

Provozovatel

http://www.techlib.cz

Facebook

Zahraniční báze