No (33475)
Yes (4333)
Number of found documents:
37808
Published from
to
Flow simulations approach for flocculation tanks
Idžakovičová, Kristýna; Bílek, Vojtěch; Haidl, Jan; Isoz, M.; Pivokonský, Martin
2024 - English
Flocculation in water treatment facilities plays a key role in the separation of colloidal inorganic and organic substances. Its optimization leads to a significant increase in its efficiency and savings of operational costs. However, it is currently based on trial-and-error experimental approaches. In this contribution, we focus on flow modeling in stirred flocculation tanks that would, after coupling with a calibrated model of particle aggregation, enable simulationbased flocculation optimization. Despite the abundance of literature on stirred tank modeling, there is no universal agreement on the methodology used to describe turbulence nor on the approach to the computational mesh creation. Consequently, there is no unified methodology for simulations and their validation. To address this, we present a best-practice methodology for economical, yet reliable flow simulations in the said device. This methodology includes the choice of the turbulence model, the approach to the design of a high quality mesh suitable for arbitrary geometries, and results evaluation. It is developed based on an extensive literature review, a multitude of flow simulations using several meshes of progressively higher quality and resolution, and various strategies to converge to steady-state flow conditions. The simulation quality indicators used here involve comparison with the experimental data on fluid velocity, stirrer power output, and flow rate through the impeller zone. Additionally, the resulting flow simulation models are compared using tracer transport simulations, hinting at their potential for coupling with particle aggregation models.
Keywords:
flocculation tank; stirring; MRF; CFD; OpenFOAM
Available in digital repository of the ASCR
Flow simulations approach for flocculation tanks
Flocculation in water treatment facilities plays a key role in the separation of colloidal inorganic and organic substances. Its optimization leads to a significant increase in its efficiency and ...
Galloping of insulated bundled overhead line - nonlinear numerical analysis in time domain
Macháček, Michael; Hračov, Stanislav
2024 - English
Our contribution focuses on a 3D numerical nonlinear analysis of galloping in a specific bundled overhead line with ice accretion. We studied the susceptibility to this self-excited oscillation, critical onset wind speeds, and global dynamic response of a very low-tensioned line with simulated icing observed on similar real conductors. Due to the highly nonlinear mechanical behavior of such a flexible cable, we employed the Newmark integration method combined with the iterative Newton-Raphson method. We analyzed two numerical models of the overhead line loaded by the wind: one assuming nonlinearity only in the wind load, while retaining the linearity of the mechanical system itself, and the other representing a fully nonlinear system including geometrical nonlinearity. Our analysis revealed that the determined critical wind speeds for the onset of galloping are in relatively close ranges for both models. However, numerical simulations with the fully nonlinear system indicated significantly lower amplitudes of limit cycle oscillations, especially at higher wind speeds, compared to the linear model of the line. This underscores the necessity of using fully nonlinear models during the design stage of such low-tensioned aerial conductors.
Keywords:
aerial bundled conductors; wind effects; galloping; limit cycle oscillation
Available in digital repository of the ASCR
Galloping of insulated bundled overhead line - nonlinear numerical analysis in time domain
Our contribution focuses on a 3D numerical nonlinear analysis of galloping in a specific bundled overhead line with ice accretion. We studied the susceptibility to this self-excited oscillation, ...
Numerical study of the steady airflow in the human respiratory system during inhaling and exhaling
Lancmanová, Anna; Bodnár, Tomáš
2024 - English
This paper presents some of the initial results of the numerical simulations of a steady turbulent flow in human upper airways during inhalation and exhalation. The mathematical model is based on the system of Reynolds-Averaged incompressible Navier-Stokes equations complemented by the SST k − ω turbulence model. The simulations were performed using finite-volume open source solver OpenFOAM on a realistic three-dimensional geometry. The main aim of this particular study is to verify the computational setup with special focus on appropriate choice and implementation of boundary conditions. The prescribed boundary conditions are chosen to mimic the physiological conditions during normal breathing cycle. This study aims to gain an insight into the airflow behavior during the inhalation and exhalation process by comparing the results of two distinct simulations corresponding to two different (opposite) flow rates . The obtained local flow rates and flow fields for both cases are presented and mutually compared. This initial work should serve as a foundation for future more complex simulations that will include the time-dependent and compressible effects.
Keywords:
human airways; incompressible Navier-Stokes; OpenFOAM
Available in digital repository of the ASCR
Numerical study of the steady airflow in the human respiratory system during inhaling and exhaling
This paper presents some of the initial results of the numerical simulations of a steady turbulent flow in human upper airways during inhalation and exhalation. The mathematical model is based on the ...
Měření teploty při technické výchově
2024 -
V tomto pokusu budeme zkoumat šíření tepla při vrtání. Vyzkoušíme, jak se zahřívají ostré a tupé vrtáky při vrtání ocelové destičky
Keywords:
vrtání; teplo; experiment
Available in the ZČU Library.
Měření teploty při technické výchově
V tomto pokusu budeme zkoumat šíření tepla při vrtání. Vyzkoušíme, jak se zahřívají ostré a tupé vrtáky při vrtání ocelové destičky
Česká putování za Richardem Wagnerem
Fránek, Michal; Kopecký, J.
2024 - Czech
Studie zkoumá fenomén českých cest za slavným německým skladatelem Richardem Wagnerem a do míst spojených s jeho kultem (Mnichov, Bayreuth, Curych atd.). Zaměřuje se na wagnerovské cesty – uskutečněné i neuskutečněné – českých skladatelů (Bedřich Smetana, Antonín Dvořák, Zdeněk Fibich, Josef Bohuslav Foerster), interpretů (Ema Destinnová, Karel Burian aj.), hudebních kritiků (Otakar Hostinský, V. V. Zelený), malířů (Jaroslav Čermák) a spisovatelů (Julius Zeyer, Jaroslav Maria, Teréza Nováková), přičemž sleduje jejich různé motivace. The study explores the phenomenon of Czech travels to famous German composer Richard Wagner and to the places associated with his cult (Munich, Bayreuth, Zurich, etc.). It focuses on the Wagnerian journeys – accomplished and not – of Czech composers (Bedřich Smetana, Antonín Dvořák, Zdeněk Fibich, Josef Bohuslav Foerster), performers (Ema Destinnová, Karel Burian, etc.), music critics (Otakar Hostinský, V. V. Zelený), painters (Jaroslav Čermák) and writers (Julius Zeyer, Jaroslav Maria, Teréza Nováková), tracing their different motivations.
Keywords:
Richard Wagner; travelling to artists
Available at various institutes of the ASCR
Česká putování za Richardem Wagnerem
Studie zkoumá fenomén českých cest za slavným německým skladatelem Richardem Wagnerem a do míst spojených s jeho kultem (Mnichov, Bayreuth, Curych atd.). Zaměřuje se na wagnerovské cesty – uskutečněné ...
Verification of the dynamic properties of a new model turbine wheel with free blades
Voronova, Evgeniya; Procházka, Pavel; Maturkanič, Dušan; Mekhalfia, Mohammed Lamine; Hodboď, Robert
2024 - English
The paper describes a new experimental model of turbine wheel with free blades. Verification tests were carried out using a Doppler laser vibrometer, with a focus on the equipment parameters under various conditions. The measurements were performed in the Laboratory of Rotational Laser Vibrometry originated at the Institute of Thermomechanics AS CR, v.v.i.
Keywords:
natural frequencies; vibration; blade; laser; turbine
Available at various institutes of the ASCR
Verification of the dynamic properties of a new model turbine wheel with free blades
The paper describes a new experimental model of turbine wheel with free blades. Verification tests were carried out using a Doppler laser vibrometer, with a focus on the equipment parameters under ...
Numerical evaluation of mass-diffusive compressible fluids flows models
Bodnár, Tomáš; Fraunié, P.
2024 - English
This contribution presents first numerical tests of some recently published alternative models for solution of viscous compressible and nearly incompressible models. All models are solved by high resolution compact finite difference scheme with strong stability preserving RungeKutta time stepping. The two simple but challenging computational test cases are presented, based on the double-periodic shear layer and the Kelvin-Helmholtz instability. The obtained time-dependent flow fields are showing pronounced shear and vorticity layers being resolved by the standard as well as by the new mass-diffusive modified models. The preliminary results show that the new models are viable alternative to the well established classical models.
Keywords:
compressible Navier-Stokes; nearly incompressible flow; mass diffusion; compact finite-difference
Available in digital repository of the ASCR
Numerical evaluation of mass-diffusive compressible fluids flows models
This contribution presents first numerical tests of some recently published alternative models for solution of viscous compressible and nearly incompressible models. All models are solved by high ...
Motion of fluids in the moving domain
Nečasová, Šárka
2024 - English
It is a survay paper where the problem of the existence of weak solutions of compressible barotropic solutions in a moving bounded domain is studied.
Keywords:
compressible fluid; moving domain; weak solutions
Available in digital repository of the ASCR
Motion of fluids in the moving domain
It is a survay paper where the problem of the existence of weak solutions of compressible barotropic solutions in a moving bounded domain is studied.
Chladící efekt stromů ve městě: principy, funkce a příklady měření
2024 -
Přednáška představila výzkumné zaměření Doc. Pokorného, jeho
kolegů z ENKI, o.p.s. a z Pedagogické fakulty JČU v Českých Budějovi cích.
Výklad se zaměřil na tok energie v krajině, vliv evapotranspirace
a na jev zvaný biotická pumpa. Problematika byla nahlédnuta i z hle diska didaktiky - jako průřezové téma vedoucí k poznání komplexních
environmentálních souvislostí.
V diskuzi byly představeny vzdělávací materiály, které kolektiv
autorů připravil pro potřeby učitelů ZŠ a SŠ: metodiky a pracovní listy
dostupné v [1].
Keywords:
krajina; biotická pumpa; evapotranspirace
Available in the ZČU Library.
Chladící efekt stromů ve městě: principy, funkce a příklady měření
Přednáška představila výzkumné zaměření Doc. Pokorného, jeho kolegů z ENKI, o.p.s. a z Pedagogické fakulty JČU v Českých Budějovi cích. Výklad se zaměřil na tok energie v krajině, vliv ...
Železniční cestovatel Eduard Bazika aneb Cestování s manželkou
Hlavačka, Milan
2024 - Czech
Ing. Eduard Bazika (1830–1914) nebyl profesionální poutník, ale poutník z profese. Jako absolvent pražské polytechniky se celý život specializoval na železniční stavitelství a jako inženýr nejdříve státních drah a od roku 1855 až do odchodu na odpočinek v roce 1891 soukromé Společnosti státní dráhy (StEG) celý život procestoval, respektive před výstavbou prochodil svěřené železnice v české a moravské krajině. I po odchodu na penzi pracoval pro Zemský výbor Království českého a jeho Železniční výbor a v této pozici opět pracovně putoval po všech koutech Čech, aby posuzoval rentabilitu budoucích místních drah. Jeho zvláštností bylo, že se vždy snažil skloubit své cestovní povinnosti s rodinným životem, což mělo za následek, že jeho žena a děti putovaly s ním po nejrůznějších štacích a železničních stavbách. Stranou neponechával ani dlouhodobější náročnější soukromé cesty s manželkou na světové výstavy a po historických památkách Itálie (v doprovodu Jiřího Stibrala) či k obhlídce nově dokončených alpských železnicích. Jako představitel sebevědomé české střední třídy, která už disponovala volným časem a finančními prostředky (a samozřejmě režijní jízdenkou) dovedl skloubit cestovatelskou povinnost s cestovatelskou vášní a putování vnímal jako nezbytnou součást aktivního životního stylu moderního člověka. Ing. Eduard Bazika (1830–1914) was not a professional pilgrim, but a pilgrim by profession. As a graduate of the Prague Polytechnic, he specialized in railway construction all his life and as an engineer, first of all for the State railways, and from 1855 until his retirement in 1891, he traveled all his life for the private State Railway Company (StEG), or rather, before construction, he traveled the entrusted railways in the Bohemian and Moravian landscape. Even after retiring, he worked for the Land Committee of the Kingdom of Bohemia and its Railway Committee, and in this position he once again traveled to all corners of Bohemia to assess the profitability of future local railways. A peculiarity of his was that he always tried to combine his traveling duties with his family life, which resulted in his wife and children traveling with him to various estates and railway constructions. He did not leave aside longer, more demanding private trips with his wife to world exhibitions and historical monuments in Italy (accompanied by Jiří Stibral) or to inspect the newly completed Alpine railways. As a representative of the self-confident Czech middle class, who already had free time and financial resources (and, of course, an overhead ticket), he was able to combine the obligation to travel with a passion for travel and perceived traveling as a necessary part of the active lifestyle of a modern person.
Keywords:
Ing Eduard Bazika; pilgrim by profession; railway
Available at various institutes of the ASCR
Železniční cestovatel Eduard Bazika aneb Cestování s manželkou
Ing. Eduard Bazika (1830–1914) nebyl profesionální poutník, ale poutník z profese. Jako absolvent pražské polytechniky se celý život specializoval na železniční stavitelství a jako inženýr nejdříve ...
NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web
Send your suggestions and comments to nusl@techlib.cz
Provider
Other bases