Number of found documents: 100
Published from to

Evaluation of the turbulent kinetic dissipation rate in an agitated vessel
Kysela, Bohuš; Konfršt, Jiří; Chára, Zdeněk; Sulc, R.; Jašíková, D.
2017 - English
The design of agitated tanks depends on operating conditions and processes for that are used for. An important parameter for the scale-up modelling is the dissipation rate of the turbulent kinetic energy. The dissipation rate is commonly assumed to be a function of the impeller power input. But this approach gives no information about distribution of the dissipation rate inside the agitated volume. In this paper the distributions of the dissipation rate inside the agitated vessels are estimated by evaluations of the CFD (Computational Fluid Dynamics). The results obtained from RANS (Reynolds Averaged Navier-Stokes equations) k-epsilon turbulent model and LES (Large Eddy Simulations) with Smagorinsky SGS (Sub Grid Scale) model are compared. The agitated vessels with standard geometry equipped with four baffles and stirred by either a standard Rushton turbine or a high shear impeller were investigated. The results are compared with mean dissipation rate estimated from the total impeller power input. Keywords: flow; large-eddy simulation Fulltext is available at external website.
Evaluation of the turbulent kinetic dissipation rate in an agitated vessel

The design of agitated tanks depends on operating conditions and processes for that are used for. An important parameter for the scale-up modelling is the dissipation rate of the turbulent kinetic ...

Kysela, Bohuš; Konfršt, Jiří; Chára, Zdeněk; Sulc, R.; Jašíková, D.
Ústav pro hydrodynamiku, 2017

Local velocity scaling in T400 vessel agitated by Rushton turbine in a fully turbulent region
Šulc, R.; Ditl, P.; Fořt, I.; Jašíková, D.; Kotek, M.; Kopecký, V.; Kysela, Bohuš
2017 - English
The hydrodynamics and flow field were measured in an agitated vessel using 2-D Time Resolved Particle Image Velocimetry (2-D TR PIV). The experiments were carried out in a fully baffled cylindrical flat bottom vessel 400 mm in inner diameter agitated by a Rushton turbine 133 mm in diameter. The velocity fields were measured in the zone in upward flow to the impeller for impeller rotation speeds from 300 rpm to 850 rpm and three liquids of different viscosities (i.e. (i) distilled water, ii) a 28% vol. aqueous solution of glycol, and iii) a 43% vol. aqueous solution of glycol), corresponding to the impeller Reynolds number in the range 50 000 < Re < 189 000. This Re range secures the fully-developed turbulent flow of agitated liquid. In accordance with the theory of mixing, the dimensionless mean and fluctuation velocities in the measured directions were found to be constant and independent of the impeller Reynolds number. On the basis of the test results the spatial distributions of dimensionless velocities were calculated. The axial turbulence intensity was found to be in the majority in the range from 0.388 to 0.540, which corresponds to the high level of turbulence intensity. Keywords: agitated vessel; Rushton turbine; PIV Fulltext is available at external website.
Local velocity scaling in T400 vessel agitated by Rushton turbine in a fully turbulent region

The hydrodynamics and flow field were measured in an agitated vessel using 2-D Time Resolved Particle Image Velocimetry (2-D TR PIV). The experiments were carried out in a fully baffled cylindrical ...

Šulc, R.; Ditl, P.; Fořt, I.; Jašíková, D.; Kotek, M.; Kopecký, V.; Kysela, Bohuš
Ústav pro hydrodynamiku, 2017

Simulation of collagen solution flow in rectangular capillary
Kysela, Bohuš; Skočilas, J.; Zitny, R.; Stancl, J.; Houska, M.; Landfeld, A.
2017 - English
The viscoelastic properties of foods and polymers can be evaluated from flow of the material in capillary with specified dimension and shape. The extrusion rheometer equipped by capillary with rectangular cross-section was used for determination of the rheological behaviour of water collagen solution. The measurements of the axial profiles in longitudinal direction of the total stresses at capillary wall were performed for various shear rates. The linear viscoelastic model of Oldroyd B type: White-Metzner model was used for simulation of fluid flow in OpenFOAM software package. The simulations describe the effect of relaxation time on wall total stress in convergent-divergent capillary. Keywords: collagen; viscoelastic model; convergent-divergent capillary Fulltext is available at external website.
Simulation of collagen solution flow in rectangular capillary

The viscoelastic properties of foods and polymers can be evaluated from flow of the material in capillary with specified dimension and shape. The extrusion rheometer equipped by capillary with ...

Kysela, Bohuš; Skočilas, J.; Zitny, R.; Stancl, J.; Houska, M.; Landfeld, A.
Ústav pro hydrodynamiku, 2017

The minimum record time for PIV measurement in a vessel agitated by a Rushton turbine
Šulc, R.; Ditl, P.; Fořt, I.; Jašíková, D.; Kotek, M.; Kopecký, V.; Kysela, Bohuš
2017 - English
In PIV studies published in the literature focusing on the investigation of the flow field in an agitated vessel the record time is ranging from the tenths and the units of seconds. The aim of this work was to determine minimum record time for PIV measurement in a vessel agitated by a Rushton turbine that is necessary to obtain relevant results of velocity field. The velocity fields were measured in a fully baffled cylindrical flat bottom vessel 400 mm in inner diameter agitated by a Rushton turbine 133 mm in diameter using 2-D Time Resolved Particle Image Velocimetry in the impeller Reynolds number range from 50 000 to 189 000. This Re range secures the fully-developed turbulent flow of agitated liquid. Three liquids of different viscosities were used as the agitated liquid. On the basis of the analysis of the radial and axial components of the mean- and fluctuation velocities measured outside the impeller region it was found that dimensionless minimum record time is independent of impeller Reynolds number and is equalled N. t(Rmin) = 103 +/- 19. Keywords: agitated vessel; Rushton turbine; PIV; averaging limits Fulltext is available at external website.
The minimum record time for PIV measurement in a vessel agitated by a Rushton turbine

In PIV studies published in the literature focusing on the investigation of the flow field in an agitated vessel the record time is ranging from the tenths and the units of seconds. The aim of this ...

Šulc, R.; Ditl, P.; Fořt, I.; Jašíková, D.; Kotek, M.; Kopecký, V.; Kysela, Bohuš
Ústav pro hydrodynamiku, 2017

Sezónní proměnlivost parametrů půdních modelů
Šípek, Václav; Tesař, Miroslav
2016 - Czech
Simulace nasycení půdního profilu v malém horském povodí a testování dvou sezónních setů parametrů. Simulation of saturation of the soil profile in the small mountain river basins and testing of two seasonal sets of parameters. Keywords: soil moisture; seasonal variability; saturated hydraulic conductivity; poresize distribution; hydrological modelling; soil hydraulic parameters Available in digital repository of the ASCR
Sezónní proměnlivost parametrů půdních modelů

Simulace nasycení půdního profilu v malém horském povodí a testování dvou sezónních setů parametrů....

Šípek, Václav; Tesař, Miroslav
Ústav pro hydrodynamiku, 2016

Multi-functional composites with integrated nanostructured carbon nanotubes based sensing films
Slobodian, P.; Pertegás, S.L.; Schledjewski, R.; Matyáš, J.; Olejník, R.; Říha, Pavel
2016 - English
Carbon nanotubes are exceptional nano-objects with respect to their remarkable properties, holding great potential in new polymeric materials design with unique characteristics. To illustrate it, the conventional glass reinforced epoxy composite is combined with a layer of entangled network of carbon nanotubes deposited on polyurethane non-woven membrane. The prepared nano-composite is studied for their diverse mjulti-functional applications involving extension and compression strain sensing composite, remoulding by means of resistance Joule heating and radiating as a planar micro strip antenna operating at frequencies of 2MHz up to 4GHz. Keywords: epoxy composite; glass fibers; carbon nanotubes; electro-mechanical properties Fulltext is available at external website.
Multi-functional composites with integrated nanostructured carbon nanotubes based sensing films

Carbon nanotubes are exceptional nano-objects with respect to their remarkable properties, holding great potential in new polymeric materials design with unique characteristics. To illustrate it, the ...

Slobodian, P.; Pertegás, S.L.; Schledjewski, R.; Matyáš, J.; Olejník, R.; Říha, Pavel
Ústav pro hydrodynamiku, 2016

Systém včasného varování před přívalovými povodněmi s uvažováním stavu vody v půdě – příklad pro horní Úpu
Tesař, Miroslav
2015 - Czech
Contribution describes an early warning system for flash flood detection that has been built in the Giant Mts. This system is located in the upper part of the Úpa River basin and Lysečinský Brook basin. The closing profiles of these basins are situated in Horní Maršov (81,7 km2 and 18,3 km2). Forecasting of flood risk is based on model approach, which uses measured hydrological and hydrometeorological quantities (rain intensity and total, discharge, soil moisture, tensiometric pressure of the soil water, air and soil temperature) as input data. Contribution describes an early warning system for flash flood detection that has been built in the Giant Mts. This system is located in the upper part of the Úpa River basin and Lysečinský Brook basin. The closing profiles of these basins are situated in Horní Maršov (81,7 km2 and 18,3 km2). Forecasting of flood risk is based on model approach, which uses measured hydrological and hydrometeorological quantities (rain intensity and total, discharge, soil moisture, tensiometric pressure of the soil water, air and soil temperature) as input data. Keywords: early warning system; flash flood; surface and soil water monitoring Available in digital repository of the ASCR
Systém včasného varování před přívalovými povodněmi s uvažováním stavu vody v půdě – příklad pro horní Úpu

Contribution describes an early warning system for flash flood detection that has been built in the Giant Mts. This system is located in the upper part of the Úpa River basin and Lysečinský Brook ...

Tesař, Miroslav
Ústav pro hydrodynamiku, 2015

Spinnability of PEO solutions with respect to their aging
Zelenková, Jana; Peer, Petra; Filip, Petr
2013 - English
Non - negligible portion of pol ymer commodity suffers from ageing that participates in sometimes significant changes of products attributes. Rheology represents a useful tool for a description of this process. The aim of this contribution is to evaluate possible ageing of PEO solution ( polyethylen e oxide ( M w =300,000 g/mol) dissolved in water at 10 wt.% concentration) based both on rheological characterization and on quality of electrospun fibres. Rheological measurements in steady shear and oscillatory modes were carried out using a rota tional rheometer MCR 501 (Anton Paar, Austria) equipped with the concentric cylinders geometry. The electrospinning measurements were executed with the help of a proposed laboratory device. The tip - to - collector distance attained 20 cm, applied voltage rang ed from 20 to 30 kV. The obtained electrospun fibres were analysed using a scanning electron microscope (VEGA 3, Tescan, Czech Republic). Both types of measurements were carried out in the period of several months during which the solution studied was plac ed in a dark and tempered box (25°C). The measurements indicate no ageing impact on rheological characteristics or quality of electrospun fibres. This guarantees more or less the identical quality of non - woven textiles prepared from PEO solutions regardles s of time period during which the solutions are deposited. Keywords: polyethylene oxide (PEO); ageing; electrospinning; rheological properties Fulltext is available at external website.
Spinnability of PEO solutions with respect to their aging

Non - negligible portion of pol ymer commodity suffers from ageing that participates in sometimes significant changes of products attributes. Rheology represents a useful tool for a description of ...

Zelenková, Jana; Peer, Petra; Filip, Petr
Ústav pro hydrodynamiku, 2013

Možnosti použití radiometrické metody při měření rozdělení hustoty směsi v potrubí
Krupička, Jan; Matoušek, Václav; Frýdl, Ivo
2011 - Czech
V Ústavu pro hydrodynamiku zrekonstruovaná laboratorní trubní linka pro výzkum proudění směsí je vybavena radiometrickým zařízením pro měření rozdělení hustoty proudící směsi po příčném profilu potrubí. Článek popisuje trubní linku a radiometrické zařízení a diskutuje různé způsoby snímání a vyhodnocení měřeného rozdělení hustoty radiometrem. Pozornost je věnována možným zdrojům chyb při měření a jejich kvantifikaci. Test loop for investigation of slurry flow was recently reconstructed at the Institute of hydrodynamics. The test loop is equipped with a radiometric device for measurement of density profiles in a pipe cross-section. The paper gives a description of the test loop and the radiometric device. The method of measurement and evaluation of density distribution is discussed. An attention is paid to identification and quantification of possible sources of measuring errors. Keywords: gamma-ray measurement; computer tomography; two-phase flow; počítačová tomografie Available in digital repository of the ASCR
Možnosti použití radiometrické metody při měření rozdělení hustoty směsi v potrubí

V Ústavu pro hydrodynamiku zrekonstruovaná laboratorní trubní linka pro výzkum proudění směsí je vybavena radiometrickým zařízením pro měření rozdělení hustoty proudící směsi po příčném profilu ...

Krupička, Jan; Matoušek, Václav; Frýdl, Ivo
Ústav pro hydrodynamiku, 2011

Vliv hrubozrnných suspenzí na měření průtoků
Chára, Zdeněk; Vlasák, Pavel
2011 - Czech
V příspěvku je ukázán vliv hrubých částic na měření průtoků pomocí elektromagnetického a hmotnostního průtokoměru. Přítomnost hrubých částic ovlivňuje přesnost měření především u elektromagnetického průtokoměru, kdy dochází k nízkofrekvenčním oscilacím. The paper deals with an investigation of an influence of coarse particles on flow metering by the electromagnetic and mass flowmeters. Presence of coarse particles has a negative impact on accuracy of the electromagnetic flowmeter, where low-frequency oscillations were observed. Keywords: suspensions; electromagnetic flowmeter; mass flowmeter; suspenze Available in digital repository of the ASCR
Vliv hrubozrnných suspenzí na měření průtoků

V příspěvku je ukázán vliv hrubých částic na měření průtoků pomocí elektromagnetického a hmotnostního průtokoměru. Přítomnost hrubých částic ovlivňuje přesnost měření především u elektromagnetického ...

Chára, Zdeněk; Vlasák, Pavel
Ústav pro hydrodynamiku, 2011

About project

NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web

Send your suggestions and comments to nusl@techlib.cz

Provider

http://www.techlib.cz

Facebook

Other bases