No (6380)
Number of found documents:
6380
Published from
to
Adaptation of methods for cyclo-stationary processes for noisy structural health data
Fischer, Cyril; Bayer, Jan; Náprstek, Jiří; Urushadze, Shota
2023 - English
In structural health analysis, various techniques, including indirect measurement via monitoring vehicles, often yield data with significant randomness and insufficient frequency separation. Conversely, the desired attributes under scrutiny are periodic in nature. Thus, methodologies designed to identify cyclo-stationary properties within noisy data can be adapted for such scenarios, assuming an adequate length of the recorded data.
Keywords:
data analysis; cyclo-stationary processes; structural health monitoring
Available at various institutes of the ASCR
Adaptation of methods for cyclo-stationary processes for noisy structural health data
In structural health analysis, various techniques, including indirect measurement via monitoring vehicles, often yield data with significant randomness and insufficient frequency separation. ...
Consistency of mathematical and experimental model of the autoparametric system
Fischer, Cyril; Náprstek, Jiří
2023 - English
This paper presents a long-overdue comparison of data obtained from experimental investigation of a spherical vibration absorber with the results of two mathematical models of the motion of a heavy sphere in a spherical surface. It shows that the danger posed by the potentially unstable self-parametric nature of the mathematical system is not too great in the case of realistic configurations, and that the values of the parameters describing the realistic structures remain within intervals corresponding to the stable behaviour of the absorber.
Keywords:
vibration absorber; rolling sphere; spherical surface; autoparametric system; structural health monitoring
Available at various institutes of the ASCR
Consistency of mathematical and experimental model of the autoparametric system
This paper presents a long-overdue comparison of data obtained from experimental investigation of a spherical vibration absorber with the results of two mathematical models of the motion of a heavy ...
Comparison of finite element simulation of tungsten nanoindentation with Berkovich and conical indenter
Fiala, L.; Ballo, I.; Kovář, J.; Fuis, Vladimír
2023 - English
Finite Element Method (FEM) was used to study the difference between using Berkovich and conical indenters in nanoindentation test of tungsten specimen. The study was aimed to determine the\nmodulus of elasticity of a tested specimen and how it changes with different indenter. The FEM analysis also revealed that the modulus of elasticity was sensitive to the dimensions of both specimen and the indenter for which were made several numerical calculations with different dimensions.
Keywords:
nanoindentation; FEM; Berkovich indenter; conical indenter; tungsten
Available at various institutes of the ASCR
Comparison of finite element simulation of tungsten nanoindentation with Berkovich and conical indenter
Finite Element Method (FEM) was used to study the difference between using Berkovich and conical indenters in nanoindentation test of tungsten specimen. The study was aimed to determine the\nmodulus ...
Mechanical properties of basalt: a study on compressive loading at different strain rates using SHPB
Falta, J.; Krčmářová, N.; Fíla, T.; Vavro, Martin; Vavro, Leona
2023 - English
This article focuses on the mechanical properties of basalt in compressive loading at different strain-rates. The study employs advanced instrumentation for the evaluation of the results in dynamic conditions, while standard uni-axial loading device is used for evaluation in quasi-static conditions. Basalt specimens were subjected to four different loading-rates from 200–600 s−1 on which the stress-strain dependence was evaluated together with DIC analysis of crack initiation and disintegration process. Understanding the mechanical properties of basalt can provide insights for engineers and designers in creating structures that are durable and able to withstand different loading conditions. The findings of this study can have implications for a wide range of industries, including aerospace, automotive, and construction, among others.
Keywords:
SHPB; basalt; compressive loading; dynamic loading
Available at various institutes of the ASCR
Mechanical properties of basalt: a study on compressive loading at different strain rates using SHPB
This article focuses on the mechanical properties of basalt in compressive loading at different strain-rates. The study employs advanced instrumentation for the evaluation of the results in dynamic ...
Asynchronous time integration while achieving zero interface energy
Dvořák, Radim; Kolman, Radek; Falta, J.; Neühauserová, M.
2023 - English
This contribution deals with an asynchronous direct time integration of the finite-element model. The proposed method is applied to the phenomenon of wave propagation through an elastic linear continuum. The numerical model is partitioned into individual subdomains using the domain decomposition method by means of localized Lagrange multipliers. For each subdomain, different time discretizations are used. No restrictions for relation between subdomain’s time steps are imposed. The coupling of the subdomains is forced by an acceleration continuity condition. Additionally, we use the a posteriori technique to also provide the displacement and velocity continuity at the interfaces, and hence we obtain exact continuity of all three kinematic fields. The proposed method is experimentally validated using the modified SHPB (split Hopkinson pressure bar) setup.
Keywords:
finite element method; direct time integration; asynchronous integration; domain decomposition; localized lagrange multipliers
Available at various institutes of the ASCR
Asynchronous time integration while achieving zero interface energy
This contribution deals with an asynchronous direct time integration of the finite-element model. The proposed method is applied to the phenomenon of wave propagation through an elastic linear ...
The design of Bayesian diagnostic expert system Querix and it’s engineering application
Věchet, Stanislav; Krejsa, Jiří; Chen, K.-S.
2023 - English
Expert systems have gained attention over the last two decades as they bring the possibility of using expert knowledge in various control systems. However, it has lost attraction in favor of artificial neural networks in recent years, which is mostly influenced by the availability of data to train neural network models and the availability of various frameworks to achieve fast time-to-market applications for given solutions.
Keywords:
expert system; decision making; advanced diagnostic; autonomous navigation; RPA
Available at various institutes of the ASCR
The design of Bayesian diagnostic expert system Querix and it’s engineering application
Expert systems have gained attention over the last two decades as they bring the possibility of using expert knowledge in various control systems. However, it has lost attraction in favor of ...
Statistical Approach for BTT probes distribution
Mekhalfia, Mohammed Lamine; Procházka, Pavel; Šmíd, R.; Tchawou Tchuisseu, Eder Batista
2023 - English
Blade tip timing (BTT) system is a non-invasive method used for measuring the blade tip timing of rotating machinery. The BTT system typically consists of sensor probes, signal conditioning system, and data acquisition unit. The sensor probes are placed in proximity to the rotating blade tips, Sensors measure the time at which each blade passes by the probe. By measuring the blade tip timing, the BTT system can detect changes in the blade tip vibration, which is an important for the health monitoring and performance optimization of rotating machinery [1]. To ensure accurate measurement of blade tip timing, the probe arrangement is crucial. The placement of the probe relative to the blade tips can affect the measurement accuracy, and thus, several arrangement algorithms have been developed to optimize the placement of the probes. Instead of considering the condition number, a statistical algorithms is followed to optimize the placement of probes for accurate measurement of blade tip timing in turbo-machinery. The statistical approach will be employed to determine the optimal locations for probes, with the aim of reducing errors in the measurement of blade tip timing. \n
Keywords:
blade tip timing principle; RMSE; blade´s dynamics
Available at various institutes of the ASCR
Statistical Approach for BTT probes distribution
Blade tip timing (BTT) system is a non-invasive method used for measuring the blade tip timing of rotating machinery. The BTT system typically consists of sensor probes, signal conditioning system, ...
Reduced modelling of aeroelastic instability in a turbine blade cascade
Pešek, Luděk; Šnábl, Pavel; Prasad, Chandra Shekhar
2023 - English
The contribution deals with the first results on flutter instability of the linear cascade triggered by impulse excitation. Together with experimental results, numerical results obtained by reduced modelling of the cascade using van der Pol model of self-excitation are presented and discussed.
Keywords:
flutter; blade cascade; self-excitation; Van der Pol
Available at various institutes of the ASCR
Reduced modelling of aeroelastic instability in a turbine blade cascade
The contribution deals with the first results on flutter instability of the linear cascade triggered by impulse excitation. Together with experimental results, numerical results obtained by reduced ...
Annular Impinging Jets and an Active Control of Hysteretic Effects
Devani, Yogendrasasidhar; Antošová, Zuzana; Trávníček, Zdeněk
2023 - English
An annular impinging air jet with and without flow control was studied experimentally using measurements of the wall pressure and flow velocity by the Pitot probe. To investigate flow control swirling effects, eight synthetic jets were generated from the nozzle center body. The experiments cover Reynolds numbers 4000–10,000 (evaluated from the outer exit diameter of the annular nozzle). For Re<9000, the bistability and hysteresis were identified and two different flow field patterns (A, B) were found under the same boundary conditions. For higher Re>9000, the hysteresis were not found.
Keywords:
annular jet; impinging jet; hysteresis
Available at various institutes of the ASCR
Annular Impinging Jets and an Active Control of Hysteretic Effects
An annular impinging air jet with and without flow control was studied experimentally using measurements of the wall pressure and flow velocity by the Pitot probe. To investigate flow control swirling ...
Stereolithography for manufacturing of advanced porous solids
Drechslerová, V.; Neuhäuserová, M.; Falta, J.; Šleichrt, J.; Kytýř, Daniel
2023 - English
The aim of this paper is focused on benefits of stereolithography (SLA) technology for the fabrication of the lightweight lattice structures with potential for load-bearing function and high absorption of impact energy. SLA is an additive manufacturing technology employing the principle of liquid resins curing moderated by radiation of a wavelength from ultra-violet band where resulting material parameters are tunable by setting of the curing process. The batches of samples manufactured using three different resins were subjected to quasi-static uni-axial tensile and compression tests. Acquired data were processed to derive deformation behaviour expressed as stress-strain diagrams and fundamental material properties. Based on the knowledge obtained from the mechanical tests, the setup of the fabrication parameters, the most suitable resin for manufacturing of the lattice structures and the overall suitability of SLA technology for the fabrication of advanced porous materials, were determined.
Keywords:
stereolithography; advanced porous materials; quasi-static testing; resin; mechanical characteristics
Available at various institutes of the ASCR
Stereolithography for manufacturing of advanced porous solids
The aim of this paper is focused on benefits of stereolithography (SLA) technology for the fabrication of the lightweight lattice structures with potential for load-bearing function and high ...
NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web
Send your suggestions and comments to nusl@techlib.cz
Provider
Other bases