No (28497)
Number of found documents:
28497
Published from
to
Modification of cooling system for laboratory measurement of rotor blade vibration
Maturkanič, Dušan; Procházka, Pavel; Hodboď, Robert; Voronova, Evgeniya; Mekhalfia, Mohammed Lamine
2024 - English
Last year, the replacement of the turbine wheel model was completed in the Laboratory of Rotational Laser Vibrometry of the Institute of Thermomechanics AS CR, v.v.i. Based on previous experience and the expected higher operating load planned for the new wheel, the cooling system was modified at the same time. The paper describes the main effort in this direction and the results that clarify the previous damage of the measuring device.
Keywords:
blade; vibration; cooling system; measurement; laboratory
Available at various institutes of the ASCR
Modification of cooling system for laboratory measurement of rotor blade vibration
Last year, the replacement of the turbine wheel model was completed in the Laboratory of Rotational Laser Vibrometry of the Institute of Thermomechanics AS CR, v.v.i. Based on previous experience and ...
PROPERTIES OF NANOCRYSTALLINE FE-NI PARTICLES PREPARED BY THERMAL REDUCTION OF OXALATE PRECURSORS
Švábenská, Eva; Roupcová, Pavla; Havlíček, Lubomír; Schneeweiss, Oldřich
2024 - English
Recent technological advancements require development of cost-effective and high-performance magnets \nwhich ideally do not contain rare earth metals or noble metals. The promising candidates are Fe-Ni-based \nalloys, in particular, the Fe50Ni50 L10 phase (tetrataenite), which has a great perspective for producing hard \nmagnetic materials. Our study explores a promising method for preparing nanoparticles of Fe-Ni alloy from an \niron-nickel oxalate precursor. The coprecipitation method was employed to prepare oxalate precursors, \nfollowed by controlled thermal decomposition in a reducing hydrogen atmosphere. The morphology and \nproperties of the resulting particles were analysed using scanning electron microscopy (SEM) coupled with \nenergy dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), Mössbauer spectroscopy (MS), and \nmagnetic measurements.\nThe SEM analysis revealed that the particles have approximately cube-shaped unit cell morphology with a\nsize in a range of 1 - 2 μm. Upon annealing, the samples contain multiple phases with varying Fe-Ni content.\nMagnetic measurements confirmed the formation of magnetically suitable Fe-Ni phases in the samples after \nannealing. Mössbauer spectroscopy emerged as a highly effective method for characterizing individual phases \nof the Fe-Ni system.
Keywords:
Magnetic materials; thermal decomposition; Mössbauer spectroscopy
Available at various institutes of the ASCR
PROPERTIES OF NANOCRYSTALLINE FE-NI PARTICLES PREPARED BY THERMAL REDUCTION OF OXALATE PRECURSORS
Recent technological advancements require development of cost-effective and high-performance magnets \nwhich ideally do not contain rare earth metals or noble metals. The promising candidates are ...
DYNAMICS OF MACHINES AND MECHANICAL SYSTEMS WITH INTERACTIONS : PROCEEDINGS DYMAMESI 2024
Zolotarev, Igor; Pešek, Luděk; Kozień, M. S.
2024 - English
The aim of the DYMAMESI is to facilitate the exchange of up to date information and knowledge among specialists in structural and multibody dynamics, in coupled interacting systems as aero-elasticity, hydro-elasticity, biomechanics, systems with feedbacks and mechatronics. In 2023 will be hosted by Cracow University of Technology, Institute of Applied Mechanics, Section of Dynamics of Systems.
Keywords:
dynamics; vibrations of mechanical systems; vibrodiagnostics; energy transformations
Available at various institutes of the ASCR
DYNAMICS OF MACHINES AND MECHANICAL SYSTEMS WITH INTERACTIONS : PROCEEDINGS DYMAMESI 2024
The aim of the DYMAMESI is to facilitate the exchange of up to date information and knowledge among specialists in structural and multibody dynamics, in coupled interacting systems as aero-elasticity, ...
Železniční cestovatel Eduard Bazika aneb Cestování s manželkou
Hlavačka, Milan
2024 - Czech
Ing. Eduard Bazika (1830–1914) nebyl profesionální poutník, ale poutník z profese. Jako absolvent pražské polytechniky se celý život specializoval na železniční stavitelství a jako inženýr nejdříve státních drah a od roku 1855 až do odchodu na odpočinek v roce 1891 soukromé Společnosti státní dráhy (StEG) celý život procestoval, respektive před výstavbou prochodil svěřené železnice v české a moravské krajině. I po odchodu na penzi pracoval pro Zemský výbor Království českého a jeho Železniční výbor a v této pozici opět pracovně putoval po všech koutech Čech, aby posuzoval rentabilitu budoucích místních drah. Jeho zvláštností bylo, že se vždy snažil skloubit své cestovní povinnosti s rodinným životem, což mělo za následek, že jeho žena a děti putovaly s ním po nejrůznějších štacích a železničních stavbách. Stranou neponechával ani dlouhodobější náročnější soukromé cesty s manželkou na světové výstavy a po historických památkách Itálie (v doprovodu Jiřího Stibrala) či k obhlídce nově dokončených alpských železnicích. Jako představitel sebevědomé české střední třídy, která už disponovala volným časem a finančními prostředky (a samozřejmě režijní jízdenkou) dovedl skloubit cestovatelskou povinnost s cestovatelskou vášní a putování vnímal jako nezbytnou součást aktivního životního stylu moderního člověka. Ing. Eduard Bazika (1830–1914) was not a professional pilgrim, but a pilgrim by profession. As a graduate of the Prague Polytechnic, he specialized in railway construction all his life and as an engineer, first of all for the State railways, and from 1855 until his retirement in 1891, he traveled all his life for the private State Railway Company (StEG), or rather, before construction, he traveled the entrusted railways in the Bohemian and Moravian landscape. Even after retiring, he worked for the Land Committee of the Kingdom of Bohemia and its Railway Committee, and in this position he once again traveled to all corners of Bohemia to assess the profitability of future local railways. A peculiarity of his was that he always tried to combine his traveling duties with his family life, which resulted in his wife and children traveling with him to various estates and railway constructions. He did not leave aside longer, more demanding private trips with his wife to world exhibitions and historical monuments in Italy (accompanied by Jiří Stibral) or to inspect the newly completed Alpine railways. As a representative of the self-confident Czech middle class, who already had free time and financial resources (and, of course, an overhead ticket), he was able to combine the obligation to travel with a passion for travel and perceived traveling as a necessary part of the active lifestyle of a modern person.
Keywords:
Ing Eduard Bazika; pilgrim by profession; railway
Available at various institutes of the ASCR
Železniční cestovatel Eduard Bazika aneb Cestování s manželkou
Ing. Eduard Bazika (1830–1914) nebyl profesionální poutník, ale poutník z profese. Jako absolvent pražské polytechniky se celý život specializoval na železniční stavitelství a jako inženýr nejdříve ...
Application of In situ TR Spectroelectrochemical Techniques in Determination of Redox Mechanism of Bioactive Compounds
Sokolová, Romana; Jiroušková, Eliška; Degano, I.; Wantulok, J.; Nycz, J.
2023 - English
The electron transfer reactions play an important role in many natural processes. Reactions such as \ndissociation, protonation, and reactions with water and other small molecules often occur in \nbiotransformation. The reaction schemes involving these chemical reactions coupled to the \nelectron transfer can be determined by cyclic voltammetry. Additionally, in \nsitu spectroelectrochemistry can efficiently contribute to the determination of oxidation or \nreduction mechanism. This technique provides information about the electroactive chromophore during \nthe redox process allowing to identification the first reaction intermediates. The final reaction \nproducts were identified by chromatographic techniques. This study represents a key role of TR \nspectroelectrochemistry in the determination of reaction intermediates in the case of \n1,10- phenanthroline derivative substituted by bioactive phenothiazine unit and \ndrug 3- fluorophenmetrazine (2-(3-fluorophenyl)-3-methylmorpholine, 3-FPM). Co pound 3-FPM\nhave recently appeared as the new psychoactive substance in the drug market.\n
Keywords:
IR spectroelectrochemistry; psychoactive substances; oxidation mechanism
Available on request at various institutes of the ASCR
Application of In situ TR Spectroelectrochemical Techniques in Determination of Redox Mechanism of Bioactive Compounds
The electron transfer reactions play an important role in many natural processes. Reactions such as \ndissociation, protonation, and reactions with water and other small molecules often occur in ...
A polarizable reference electrode
Mareček, Vladimír
2023 - English
New concept of a reference electrode for electrochemical systems resolves a problem of a poor \npotential stability of refence electrodes based on the distribution of a strongly \nhydrophobic common cation between two immiscible electrolyte solutions (TTTES). The use of a \npolarizable metal electrode instead of a classical reference electrode is demonstrated in \n a modified conventional four-electrode cell with TTTES. A simple battery operated potentiostat \ncontrols the working electrode potential in a three-electrode configuration. The working metal \nelectrode then serves as a polarizable reference organic solvent electrode in a four-electrode \nsystem for the polarization of the water/organic solvent interface.\n\n
Keywords:
reference electrode; liquid/liquid interface; chloride extraction
Available on request at various institutes of the ASCR
A polarizable reference electrode
New concept of a reference electrode for electrochemical systems resolves a problem of a poor \npotential stability of refence electrodes based on the distribution of a strongly ...
Elektrochemické studium pH závislých redoxních vlastností komplexů mědi s aza-makrocyklickými ligandy
Koláčná, Lucie; Maďar, M.; Kubíček, V.; Ludvík, Jiří
2023 - Czech
Molekulární elektronika je progresivní směr moderní materiálové chemie. Zabývá se vývojem\nelektronických prvků na úrovni jedné molekuly. Nejdůmyslnější molekulární elektroniku\nnajdeme v přírodě v podobě metaloenzymů. Jedním ze směrů výzkumu jejich modelů jsou\nkomplexy různě substituovaných azamakrocyklů. Předností těchto molekul je jejich stabilita a\ndobře definovaná syntéza. Investigated Cu(II) complexes are based on plain or cross-bridged cyclam. The\nelectrochemically inactive cyclam was modified by carboxylate, phosphonate, or phenolate\npendant arms. Cu(II) represents the main redox center of the complexes. Modification of the\nligand causes a changed pattern of complex redox response in buffered aqueous solution.\nIrreversible Cu(II) reduction results in complex decomposition to amalgamated copper and\nligand in excess. After Cu(0) electrochemical in situ re-oxidation, copper and ligand are recomplexed.\nComplexes undergo isomerization, accelerated by increasing the temperature. The\ninfluence of pH on complex isomerization and the reversibility of its reduction was described.
Keywords:
cyclam; Cu(II) complexes; pendant arms
Available on request at various institutes of the ASCR
Elektrochemické studium pH závislých redoxních vlastností komplexů mědi s aza-makrocyklickými ligandy
Molekulární elektronika je progresivní směr moderní materiálové chemie. Zabývá se vývojem\nelektronických prvků na úrovni jedné molekuly. Nejdůmyslnější molekulární elektroniku\nnajdeme v přírodě v ...
Determination of Selected Natural Psychoactive Substances in Organic Matrices at 3D Printed Electrodes
Choińska-Mlynarczyk, Marta; Šestáková, Ivana; Navrátil, Tomáš
2023 - English
Psilocybin and its derivative psilocin are popular psychoactive substances both as experimental\ntreatments in clinical trials and as illicit drugs. Their potential ability to influence the human\nbrain entails the need for a fast, inexpensive, selective, and sensitive method of their\ndetermination. The aim of our study was the development of new 3D-printed electrodes which\nfulfill these demands and are useful for medical, toxicological, and forensic purposes.\nSuccessful development allows determining in real matrices (human plasma and dried\nmushrooms) concentrations of the order of 1 μmol dm-3.\n
Keywords:
natural psychoactive substances; 3D-printed electrodes; psilocin; psilocybin
Available on request at various institutes of the ASCR
Determination of Selected Natural Psychoactive Substances in Organic Matrices at 3D Printed Electrodes
Psilocybin and its derivative psilocin are popular psychoactive substances both as experimental\ntreatments in clinical trials and as illicit drugs. Their potential ability to influence the ...
Epidemiologické modely s agenty
Neruda, Roman
2023 - Czech
Tento příspěvek je jemným úvodem do problematiky agentních modelů a jejich aplikací v epidemiologickém modelování. Představíme agentní modely jednak z hlediska informatiky, jednak jako nástroj modelování v jiných vědních disciplínách. V příkladové studii ukážeme model s agenty a sociální sítí jejich kontaktů, který slouží pro simulaci vývoje epidemie a vlivu protiepidemických opatření.
Available at various institutes of the ASCR
Epidemiologické modely s agenty
Tento příspěvek je jemným úvodem do problematiky agentních modelů a jejich aplikací v epidemiologickém modelování. Představíme agentní modely jednak z hlediska informatiky, jednak jako nástroj ...
Plošné návrhové srážky v českých povodích
Müller, Miloslav; Kašpar, Marek; Hulec, Filip
2023 - Czech
Data o srážkové intenzitě na území Česka s horizontálním rozlišením 1 km2 a časovým krokem 10 minut, získaná adjustací radarových odhadů daty ze srážkoměrných stanic, posloužila k odvození návrhových plošných srážek v českých povodích I. až IV. řádu a v povodích útvarů povrchových vod. Při zdvojnásobení doby akumulace srážky vzroste návrhový úhrn v jednotlivých pixelech v průměru o cca 20 %. S rostoucí plochou povodí velikost návrhových úhrnů klesá, a to především v případě kratších dob akumulace. Data on rainfall intensity on the territory of the Czech Republic with a horizontal resolution of 1 km2 and a time step of 10 minutes, obtained by adjusting radar estimates with data from rain gauge stations, were used to derive design areal precipitation in the Czech river basins of 1st to 4th order and in the basins of surface water bodies. When the rainfall accumulation time is doubled, the design precipitation total in individual pixels increases by about 20% on average. The magnitude of the design totals decreases with increasing catchment area, especially for shorter accumulation periods.
Keywords:
design precipitation; catchment; return period
Available at various institutes of the ASCR
Plošné návrhové srážky v českých povodích
Data o srážkové intenzitě na území Česka s horizontálním rozlišením 1 km2 a časovým krokem 10 minut, získaná adjustací radarových odhadů daty ze srážkoměrných stanic, posloužila k odvození návrhových ...
NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web
Send your suggestions and comments to nusl@techlib.cz
Provider
Other bases