No (274)
Yes (45)
Number of found documents:
319
Published from
to
Progresívne delenie hydroeróziou
Kmec, Ján; Sobotová, Lýdia
2011 - Slovak
Technology of water jet cutting and dividing of high pressure water into two jets present new
approaches of shape cutting and dividing of various materials at cold cut without influence of
heat-affected zone of material in cutting edge.
Keywords:
technologie řezání vodním paprskem; studený řez řezání všechny materiály; technology of water jet cutting; cold cut cuts all materials
Available in digital repository of ZČU.
Progresívne delenie hydroeróziou
Technology of water jet cutting and dividing of high pressure water into two jets present new approaches of shape cutting and dividing of various materials at cold cut without influence ...
Aplikácia IKT v predmete technika na ZŠ
Štancel, Michal
2011 - Slovak
Diplomová práca sa zaoberá aplikáciou IKT v predmete Technika na základných školách.
Práca je rozdelená do štyroch hlavných kapitol. Prvá kapitola sa zaoberá predmetom
Technika, jeho vzdelávacími cieľmi a učiteľom predmetu Technika. V druhej kapitole sú uvedené
jednotlivé prostriedky IKT, ktoré sa používajú na vyučovaní nielen na základných školách.
V poslednej teoretickej kapitole zdôrazňujeme prepojenie IKT a predmetu Technika.
V praktickej časti sme sa zaoberali najmä aplikáciou IKT do predmetu Technika. Venovali
sme sa využívaniu IKT na hodinách a zisťovali sme vplyv IKT na žiakov základných škôl. Diploma Thesis deals with the application of ICT to Technology in Primary School.
Diploma Thesis is divided into four main chapters. The first chapter deals with the subject
Technology, its aims of education and the teacher in subject Technology. The second chapter
introduces particular aids for teaching ICT, which are used in teaching process not only in
primary schools. The last theoretical chapter emphasizes the connection of ICT and Technology.
In the practical part we dealt mainly with the application of ICT to Technology. We applied
ICT at Technology lessons and we investigated the influence of ICT on pupils in primary
schools.
Keywords:
IKT; základní školy; ICT; primary schools
Available in the ZČU Library.
Aplikácia IKT v predmete technika na ZŠ
Diplomová práca sa zaoberá aplikáciou IKT v predmete Technika na základných školách. Práca je rozdelená do štyroch hlavných kapitol. Prvá kapitola sa zaoberá predmetom Technika, jeho vzdelávacími ...
Starobné dochodkové sporenie v dochodkovom systéme SR
Rievajová, Eva; Ošková, Silvia
2011 - Slovak
One of the tasks of social policy is to ensure adequate pensions to citizens.
Most EU countries in recent years have implemented reforms of pension systems and
the Slovak Republic has begun gradually since 2004. Slovak pension system is built on
three pillars, the article focuses on the second capitalization pillar. The aim of this
paper is an evaluation of its previous operation as well as outlining the upcoming
changes.
Keywords:
pension systems; pension´s reform in Slovakia; pillars of pension system; capitalization pillar
Available in the UPCE Library.
Starobné dochodkové sporenie v dochodkovom systéme SR
One of the tasks of social policy is to ensure adequate pensions to citizens. Most EU countries in recent years have implemented reforms of pension systems and the Slovak Republic has begun ...
Aktuálne k problematike kvality a efektívnosti výkonu verejnej správy v SR
Beličková, Kornélia
2010 - Slovak
The author´s paper has the aim to assess briefly the issue of quality and efficiency
of the public administration in Slovakia today compared with the past, when the focus of
attention in the state budget reporting was cash principle. Since has made some significant
changes regarding the budgetary process as a whole, i.e. in all its phases (stages).
Keywords:
state budget; budget process; changes in the budgetary process; government; budgeting information system
Available in digital repository of UPCE.
Aktuálne k problematike kvality a efektívnosti výkonu verejnej správy v SR
The author´s paper has the aim to assess briefly the issue of quality and efficiency of the public administration in Slovakia today compared with the past, when the focus of attention in the state ...
Verejná správa v slovenskej republike – aktuálne problémy
Neubauerová, Erika; Dubrovina, Nadiya
2010 - Slovak
The paper deals with structure of public administration in Slovakia and its three
parts: government, self-government and public corporations. On the basis of current
problems (the impact of the global economic crisis, development of world economy,
decentralization process in public administration, elections…) it points to the necessity of
changes in public policy.
Keywords:
public administration; government; self-government units; public corporations; competence
Available in digital repository of UPCE.
Verejná správa v slovenskej republike – aktuálne problémy
The paper deals with structure of public administration in Slovakia and its three parts: government, self-government and public corporations. On the basis of current problems (the impact of the ...
Posilnenie finančnej autonómie obcí a miest v SR
Neupauerová, Zuzana
2010 - Slovak
This article is discussing about the final form of the new territorial-administrative
system in Slovakia and their financing. The first reason was the need to summarize the scope
of new competencies of territorial self-government and match it with adequate amount of
public finances. The second reason was necessary to wait for the new tax structure that would
already be accordant with EU accession requirements as well as for decision on major source
of Slovak self-government funding.
Keywords:
decentralization; public finances; territorial self-government; tax structure
Available in digital repository of UPCE.
Posilnenie finančnej autonómie obcí a miest v SR
This article is discussing about the final form of the new territorial-administrative system in Slovakia and their financing. The first reason was the need to summarize the scope of new competencies ...
Programové rozpočtovanie ako jedno z prínosov reformy verejných financií
Baláži, Peter
2010 - Slovak
The aim of this text is to advert on implementation’s necessity of performance
budgeting in the level of local self-government, to analyse advantages, which it brings along
and on the example of the particular village to explain method of compilation of the
performance budget and his form. The result of the thesis’s exploration is that implementation
of performance budgeting is the sign of modern approach to the using of public resources. We
made a conclusion, that the performance budget has higher information’s value and it forms
the base for the budgeting of the medium-term expenses.
Keywords:
reform of state government; local self-government; performance budgeting; expenses of the local budget; efficiency; transparency
Available in the UPCE Library.
Programové rozpočtovanie ako jedno z prínosov reformy verejných financií
The aim of this text is to advert on implementation’s necessity of performance budgeting in the level of local self-government, to analyse advantages, which it brings along and on the example of the ...
Verejné výdavky a sociálny štát v čase hospodárskej krízy
Zubaľová, Alena; Vassová, Adriana
2010 - Slovak
The welfare state has several objectives, implementation of which brings increasing
pressure on public expenditure. Social policy is part of economic policy among its key
elements include: social support, social assistance, employment, housing and others. The
public sector plays an important role in achieving social policy objectives. In a time of
economic crisis, the question arises whether to support growth, or rather a reduction in
public expenditure in relation to the building of the welfare state.
Keywords:
public expenditure; public sector; welfare state; social policy; economic crisis
Available in digital repository of UPCE.
Verejné výdavky a sociálny štát v čase hospodárskej krízy
The welfare state has several objectives, implementation of which brings increasing pressure on public expenditure. Social policy is part of economic policy among its key elements include: social ...
Výskum časových nárokov na prípravu riadiacich programov
Havrila, Michal
2009 - Slovak
Časové nároky na prípravu riadiacich programov pre CNC obrábacie stroje môžu byť vhodným kritériom na vymedzenie priestoru pre použitie systémov dielenského programovania vo výrobnej praxi strojárskych a im príbuzných podnikov, závodov, firiem a prevádzok.
Pri príprave a sústredení časových nárokov na prípravu riadiacich programov je dôležité porovnanie a následná analýza použitých spôsobov programovania a to:
- konvenčným (ručným) programovaním
- dielenským programovaním
- automatizovaným programovaním CAD/CAM (modulmi určenými pre automatizovanú prípravu riadiacich programov)
Keywords:
obrábění; CNC řízení; řídící program; machining; CNC control; control program
Available in digital repository of ZČU.
Výskum časových nárokov na prípravu riadiacich programov
Časové nároky na prípravu riadiacich programov pre CNC obrábacie stroje môžu byť vhodným kritériom na vymedzenie priestoru pre použitie systémov dielenského programovania vo výrobnej praxi ...
Tvorba NC programu pre matematicky popísané tvarové plochy
Kráľ, Ján; Kráľ, Ján
2009 - Slovak
V súčasnosti pri výrobe tvarových plôch sa používajú CNC obrábacie stroje. Programy pre nich možno napísať ručne, alebo využitím CAM programov, resp. modulov, dostupných v niektorých z veľkých CA programov. Aj keď programy poskytujú veľké množstvo parametrov pre optimalizáciu NC kódu, univerzálna spolupráca s nekonečným množstvom postprocessorov, ako aj nedokonalosť CADovského modulu pri spracovaní 3D matematicky popísanej plochy, vedú k nie príliš presvedčivým výsledkom. Eliminovať tieto nežiaduce okolnosti by mal nižšie popísaný EqCAM. Generovaním optimálneho NC kódu, obídením rôznych vstavaných interpolácií a presným riadením v každom kroku je možné docieliť maximálnu presnosť a kvalitu výrobku každého stroja
Keywords:
CNC; postprocessor; Catia; parametrická plocha; CNC; postprocessor; Catia; parametric surface
Available in digital repository of ZČU.
Tvorba NC programu pre matematicky popísané tvarové plochy
V súčasnosti pri výrobe tvarových plôch sa používajú CNC obrábacie stroje. Programy pre nich možno napísať ručne, alebo využitím CAM programov, resp. modulov, dostupných v niektorých z veľkých CA ...
NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web
Send your suggestions and comments to nusl@techlib.cz
Provider
Other bases