Ne (7622)
Ano (1644)
Počet nalezených dokumentů:
9266
Publikováno od
do
Book of Abstracts. 18th Youth Symposium on Experimental Solid Mechanics
Kytýř, Daniel; Doktor, Tomáš; Zlámal, Petr
2023 - anglický
The YSESM symposium provides a forum for young researchers and engineers, PhD students and students dealing with subjects of experimental mechanics. The Symposium concentrates on current work in all areas of experimental research and its application in solid and fluid mechanics. The topic will particularly concern to: Conventional and Advanced Experimental Methods in Solid and Fluid Mechanics; Non-Destructive Testing and Inspection, Measurements in Material Science, Computer Assisted Testing and Simulation, Engineering Design Simulation, Hybrid Methods, Experimental Techniques – Numerical Simulation, Optical Methods and Image Processing, Measurements in Biomechanics, Sensor Techniques for Micro- and Nano-Applications, Measurement Methods for Forensic Engineering.
Klíčová slova:
experimental mechanics; fluid mechanics; mechanics of solids
Dokument je dostupný na externích webových stránkách.
Book of Abstracts. 18th Youth Symposium on Experimental Solid Mechanics
The YSESM symposium provides a forum for young researchers and engineers, PhD students and students dealing with subjects of experimental mechanics. The Symposium concentrates on current work in all ...
Souvislost mezi principem nejmenší akce a termodynamickou podmínkou stability
Maršík, František; Trávníček, Zdeněk; Antošová, Zuzana
2023 - anglický
The extended principle is formulated for a material point (M.P.) X, which has nonzero mass, temperature, and trajectory x(X,t). The Lagrangian of this variation principle is equal to the kinetic energy from which, the internal energy of the material point (which depends on the entropy) and the additional energy caused by the frictional force are subtracted. The relation between the inertial force and the entropy gradient is found and the gravitational force is completely replaced by the entropy gradient. Thanks to the mentioned properties of the total enthalpy, the Thermodynamic criterion of stability of the state of M.P., is formulated.
Klíčová slova:
principle of the least action; thermodynamic stability condition; annular swirl flow
Dokument je dostupný na externích webových stránkách.
Souvislost mezi principem nejmenší akce a termodynamickou podmínkou stability
The extended principle is formulated for a material point (M.P.) X, which has nonzero mass, temperature, and trajectory x(X,t). The Lagrangian of this variation principle is equal to the kinetic ...
Texture Spectral Similarity Criteria Comparison
Havlíček, Michal; Haindl, Michal
2023 - anglický
Criteria capable of texture spectral similarity evaluation are presented and compared. From the fifteen evaluated criteria, only four criteria guarantee zero or minimal spectral ranking errors. Such criteria can support texture modeling algorithms by comparing the modeled texture with corresponding synthetic simulations. Another possible application is the development of texture retrieval, classification, or texture acquisition system. These criteria thoroughly test monotonicity and mutual correlation on specifically designed extensive monotonously degrading experiments.
Klíčová slova:
Texture Comparison; Texture Modeling; Texture Retrieval; Texture Classification; Texture Acquisition
Dokument je dostupný na externích webových stránkách.
Texture Spectral Similarity Criteria Comparison
Criteria capable of texture spectral similarity evaluation are presented and compared. From the fifteen evaluated criteria, only four criteria guarantee zero or minimal spectral ranking errors. Such ...
Book of abstracts of the 1st outdoor seminar of the Department of Optical Materials: Advances in the new materials engineering and study
Buryi, Maksym; Král, Robert
2023 - anglický
The seminar is dedicated to the main activities of the department of Optical Materials, FZU - Institute of Physics of the Czech Academy of Sciences in the course of national and international collaborations. In particular, the advanced methods of the (nano)materials synthesis, fabrication, and characterization are presented and discussed in detail. The aim of the seminar is to establish more of the effective paths of communication and data exchange by creating and maintaining links among the teams of national and international experts in various fields of physical and chemical knowledge, both experimental and theoretical.
Klíčová slova:
nanomaterials; synthesis; data exchange
Dokument je dostupný na externích webových stránkách.
Book of abstracts of the 1st outdoor seminar of the Department of Optical Materials: Advances in the new materials engineering and study
The seminar is dedicated to the main activities of the department of Optical Materials, FZU - Institute of Physics of the Czech Academy of Sciences in the course of national and international ...
Stereolithography for manufacturing of advanced porous solids
Drechslerová, V.; Neuhäuserová, M.; Falta, J.; Šleichrt, J.; Kytýř, Daniel
2023 - anglický
The aim of this paper is focused on benefits of stereolithography (SLA) technology for the fabrication of the lightweight lattice structures with potential for load-bearing function and high absorption of impact energy. SLA is an additive manufacturing technology employing the principle of liquid resins curing moderated by radiation of a wavelength from ultra-violet band where resulting material parameters are tunable by setting of the curing process. The batches of samples manufactured using three different resins were subjected to quasi-static uni-axial tensile and compression tests. Acquired data were processed to derive deformation behaviour expressed as stress-strain diagrams and fundamental material properties. Based on the knowledge obtained from the mechanical tests, the setup of the fabrication parameters, the most suitable resin for manufacturing of the lattice structures and the overall suitability of SLA technology for the fabrication of advanced porous materials, were determined.
Klíčová slova:
stereolithography; advanced porous materials; quasi-static testing; resin; mechanical characteristics
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Stereolithography for manufacturing of advanced porous solids
The aim of this paper is focused on benefits of stereolithography (SLA) technology for the fabrication of the lightweight lattice structures with potential for load-bearing function and high ...
A new blade cascade for flutter studies
Šnábl, Pavel; Pešek, Luděk; Procházka, Pavel P.; Skála, V.
2023 - anglický
In this paper, a new blade cascade, developed in the Institute of Thermomechanics, is presented. The geometry of the cascade was modified so now the stall flutter can occur. It has some major construction improvements over the original cascade which now allow more precise and reliable measurements. The stability of the new blade cascade with five NACA 0010 profiles with rotational degree of freedom is assessed by Travelling Wave Mode approach and Aerodynamic Influence Coefficient approach.
Klíčová slova:
blade cascade; stability; travelling wave mode; aerodynamic influence coefficient
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
A new blade cascade for flutter studies
In this paper, a new blade cascade, developed in the Institute of Thermomechanics, is presented. The geometry of the cascade was modified so now the stall flutter can occur. It has some major ...
Identification of quasiperiodic processes in the vicinity of the resonance
Fischer, Cyril; Náprstek, Jiří
2023 - anglický
In nonlinear dynamical systems, strong quasiperiodic beating effects appear due to combination of self-excited and forced vibration. The presence of symmetric or asymmetric beatings indicates an exchange of energy between individual degrees of freedom of the model or by multiple close dominant frequencies. This effect is illustrated by the case of the van der Pol equation in the vicinity of resonance. The approximate analysis of these nonlinear effects uses the harmonic balance method and the multiple scale method.
Klíčová slova:
dynamical systems; quasiperiodic response; van der Pol equation
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Identification of quasiperiodic processes in the vicinity of the resonance
In nonlinear dynamical systems, strong quasiperiodic beating effects appear due to combination of self-excited and forced vibration. The presence of symmetric or asymmetric beatings indicates an ...
Laboratory X-ray imaging in material sciences
Koudelka_ml., Petr; Kytýř, Daniel; Jiroušek, O.
2023 - anglický
In recent decades, X-ray imaging and computed (micro)tomography (XCT) in particular have become common tools for volumetric inspection, visualization, and analysis of internal structure in materials from various fields [1]. In this lecture, we will explore various applications of laboratory X-ray imaging chains utilizing the combination of tomographical imaging with mechanical, thermal, or chemical loading of the irradiated sample in a so-called time-resolved imaging allowing for unprecedented insight into different phenomena driving fundamental processes encountered in various fields of material science. We will show that failure processes in engineering or geological materials [2] can be thoroughly studied by synergy of information from radiographical imaging and other methods including acoustic emission detection and optical measurements via high-speed visible-spectrum and thermal-imaging cameras, where the radiography provides important spatial information regarding deformation processes evolving within the tested samples that could not be obtained otherwise. The state-of-the-art the laboratory based imaging chains for investigation of dynamic response of materials under loading will be also discussed including high speed X-ray radiography utilizing a powerful X-ray source during high velocity impact as an approach suitable for inspection of an impacted sample. As an alternative to both conventional high-power sources and accelerator facilities, capabilities of a flash X-ray system developed primarily for in-situ ballistics research providing very short bursts of an extremely powerful intermittent X-ray radiation with a typical duration of dozens of nanoseconds will be shown.
Klíčová slova:
X-ray imaging; material characterization; mechanical properties
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Laboratory X-ray imaging in material sciences
In recent decades, X-ray imaging and computed (micro)tomography (XCT) in particular have become common tools for volumetric inspection, visualization, and analysis of internal structure in materials ...
Aerodynamic Measurements on Subsonic Compressor Blade Cascades KR-D-7 and KR-D-8
Šimurda, David; Hála, Jindřich; Luxa, Martin; Radnic, Tomáš
2023 - anglický
This report contains results and evaluation of aerodynamic measurements conducted on two variant subsonic compressor blade cascades with MCA profile (KR-D-7) and DCA profile (KR-D-8) at transonic flow regimes.
Klíčová slova:
compressor blade cascade; experiment; transonic flow; subsonic flow; MCA profile; DCA profile
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Aerodynamic Measurements on Subsonic Compressor Blade Cascades KR-D-7 and KR-D-8
This report contains results and evaluation of aerodynamic measurements conducted on two variant subsonic compressor blade cascades with MCA profile (KR-D-7) and DCA profile (KR-D-8) at transonic flow ...
Aerodynamic Measurements on Transonic Compressor Blade Cascades KR-D-9 and KR-D-10
Šimurda, David; Hála, Jindřich; Luxa, Martin
2023 - anglický
This report contains results and evaluation of aerodynamic measurements conducted on two variant transonic compressor blade cascades with MCA profile (KR-D-10) and DCA profile (KR-D-9) at transonic flow regimes.
Klíčová slova:
compressor blade cascade; experiment; transonic flow; MCA profile; DCA profile
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Aerodynamic Measurements on Transonic Compressor Blade Cascades KR-D-9 and KR-D-10
This report contains results and evaluation of aerodynamic measurements conducted on two variant transonic compressor blade cascades with MCA profile (KR-D-10) and DCA profile (KR-D-9) at transonic ...
NUŠL poskytuje centrální přístup k informacím o šedé literatuře vznikající v ČR v oblastech vědy, výzkumu a vzdělávání. Více informací o šedé literatuře a NUŠL najdete na webu služby.
Vaše náměty a připomínky posílejte na email nusl@techlib.cz
Provozovatel
Zahraniční báze