Number of found documents: 466
Published from to

IMPOSING BIAXIAL STRAIN ON 2D LAYERED MATERIALS BY LIQUID-INDUCED SWELLING OF SUPPORTING POLYMER
Sampathkumar, Krishna; Pekárek, J.; Frank, Otakar
2021 - English
2D layered materials promise to revolutionize the field of electronics, photonics, optoelectronics, energy storage, and sensing, etc. 2D materials have exceptional mechanical properties, with critical elongation >10%. Employing the strain to manipulate the electronic structure of these 2D materials could lead to further improvement of their implementation in many aspects. The ease of manipulation of their electronic structure can be one of the critical factors for their utilization in photonic devices. Apart from the strain, which decreases (increases) the bandgap energy at the rate of similar to 100 meV under 1% of biaxial tension (compression), also the layer number causes bandgap energy change of, e.g., 0.5 eV between bulk (1.3 eV) and monolayer MoS2 (1.8 eV). In our work, we focus on using the swelling behavior of PMMA/SU8 polymer in methanol to impose the strain on 2D layered materials. In the first trials, we have shown that it is possible to reach a strain gradient from 0 to similar to 0.5% of biaxial strain via simple swelling of polymer substrates, both for graphene [1] and transition metal di-chalcogenides (TMDC) like MoS2. Raman spectroscopy was used to probe the lattice strain in the materials through measuring changes of vibrational frequencies, and photoluminescence was used to probe the strain-induced bandgap character and energy in TMDC at room temperature. The surface corrugation of the 2D material after the soaking was recorded with the help of atomic force microscope (AFM). Keywords: raman-spectroscopy; graphene; monolayer; bubbles; 2D material; graphene; tmdc; strain engineering; biaxial strain Available in digital repository of the ASCR
IMPOSING BIAXIAL STRAIN ON 2D LAYERED MATERIALS BY LIQUID-INDUCED SWELLING OF SUPPORTING POLYMER

2D layered materials promise to revolutionize the field of electronics, photonics, optoelectronics, energy storage, and sensing, etc. 2D materials have exceptional mechanical properties, with critical ...

Sampathkumar, Krishna; Pekárek, J.; Frank, Otakar
Ústav fyzikální chemie J. Heyrovského, 2021

EPR-elektrochemická studie redukčního mechanismu konjugátů pyrenu a cyklobutenu
Koláčná, Lucie; Polák, P.; Klíma, Jiří; Tobrman, T.; Ludvík, Jiří
2021 - Czech
Čistě organické konjugované systémy nacházejí v současné době široké uplatnění\nv materiálové chemiiý. Jsou často využívané také pro přípravu organických polovodičů, na\nkteré je zaměřen náš projekt. ´´Green smart molecules´´ jsou biodegradovatelné látky, které\nneobsahují žádné kovy. Velkou výhodou je možnost úpravy jejich vlastností změnou struktury\npomocí prosté chemické modifikace. Reduction mechanism of pyrene-cyclobutene conjugates were studied electrochemically and\nspectro-electrochemically. Analysis and interpretation of spectro-electrochemical data of\nconjugates revealed intramolecular communication of electrons and enabled determination of\nredox mechanism of conjugates. This knowledge is fundamental for tuning the required redox\nproperties of molecules just by chemical modification. Studied molecules represent promising\nmaterial for organic semiconductor materials. Keywords: Pyrene; Electrochemical reduction; Cyclobutene Available on request at various institutes of the ASCR
EPR-elektrochemická studie redukčního mechanismu konjugátů pyrenu a cyklobutenu

Čistě organické konjugované systémy nacházejí v současné době široké uplatnění\nv materiálové chemiiý. Jsou často využívané také pro přípravu organických polovodičů, na\nkteré je zaměřen náš projekt. ...

Koláčná, Lucie; Polák, P.; Klíma, Jiří; Tobrman, T.; Ludvík, Jiří
Ústav fyzikální chemie J. Heyrovského, 2021

Looking into the Photo-stability of Eosin by Electrochemical Methods
Sabatini, F.; Sokolová, Romana; Degano, I.
2021 - English
Eosin Y is a synthetic organic dye belonging to the xanthene family. Its bright and fluorescent\npink hue attracted and intrigued the painters of the 19th century, who experimented eosin as\npigment lake (often called Geranium lake) in their paintings. Nevertheless, eosin coloration is\nas beautiful as unstable, and examples of work of arts with faded hues have been documented.\nEosin is not only photo-sensitive but also pH sensitive, making its study very complex. In this\nwork, the combination of electrochemical and spectroscopic techniques revealed to be effective\nfor correlating the physical evidence of eosin fading with its chemical degradation. Keywords: Eosin; Synthetic dye; UV-Vis spectroelectrochemistry Available on request at various institutes of the ASCR
Looking into the Photo-stability of Eosin by Electrochemical Methods

Eosin Y is a synthetic organic dye belonging to the xanthene family. Its bright and fluorescent\npink hue attracted and intrigued the painters of the 19th century, who experimented eosin as\npigment ...

Sabatini, F.; Sokolová, Romana; Degano, I.
Ústav fyzikální chemie J. Heyrovského, 2021

Oxidation Processes of N-methylguanines
Trnková, L.; Třísková, I.; Liška, Alan; Ludvík, Jiří
2021 - English
The oxidation processes of N-methylguanines were investigated in both experimental and\ntheoretical way. Voltammetric oxidation potentials of guanine and its methyl analogues,\nacquired on polymer pencil graphite electrode (pPeGE), were compared with the HOMO\n(SOMO) energies calculated by density functional (DFT) methods. Our study contributes to\nunderstanding not only the oxidation processes of methylated guanines but also their role in\nepigenetics. Keywords: Guanine; N-methylated guanine; Oxidation process Available on request at various institutes of the ASCR
Oxidation Processes of N-methylguanines

The oxidation processes of N-methylguanines were investigated in both experimental and\ntheoretical way. Voltammetric oxidation potentials of guanine and its methyl analogues,\nacquired on polymer ...

Trnková, L.; Třísková, I.; Liška, Alan; Ludvík, Jiří
Ústav fyzikální chemie J. Heyrovského, 2021

3D printed materials for the electrochemical determination of biologically active compounds
Choińska, Marta Katarzyna; Navrátil, Tomáš; Hrdlička, Vojtěch
2021 - English
3D printing materials are relatively novel materials in electrochemistry,\nused for manufacturing of electrochemical cells, electrodes\netc. They have been widely used mainly for tailored, fast, inexpensive,\nand easy preparation of various equipment for analyses of\nbiologically active compounds. Various medicinal products and illicit\ndrugs belong to this broad group of analytes which need to be\nmonitored because of the possibility of (un)intentional overdose or\nrecreational consumption, which can cause serious side effects or\neven death. Due to this risk, we decided to focus our research on the\ndevelopment of new, sensitive, selective, and easily customizable 3D\nprinted sensors for the determination of some commonly used\nantidepressants, analgesics, and illicit drugs. Keywords: analgesics; antidepressants; voltammetric determination Available on request at various institutes of the ASCR
3D printed materials for the electrochemical determination of biologically active compounds

3D printing materials are relatively novel materials in electrochemistry,\nused for manufacturing of electrochemical cells, electrodes\netc. They have been widely used mainly for tailored, fast, ...

Choińska, Marta Katarzyna; Navrátil, Tomáš; Hrdlička, Vojtěch
Ústav fyzikální chemie J. Heyrovského, 2021

Metalothioneiny jako biomarkery znečištění životního prostředí
Šestáková, Ivana; Křivská, D.; Navrátil, Tomáš
2021 - Czech
Sledování obsahu metalothioneinů jako biomarkeru znečištění vodního prostředí je\npředmětem řady studií i mezinárodního programu (Mediterranean Action Plan of The United\nNations Environment Program, 1999). Pro sledování vlivu kontaminace půdy jsou vhodnou\nmožností volně žijící drobní savci, kde hladiny metalothioneinů závisí na obsazích kovů\nv půdě, a i na dietních zvyklostech (omnivoři, herbivoři, karnivoři). V posledním desetiletí\nnabývají na významu studie vlivu parazitů, kde je popisován jak pozitivní, tak negativní vliv\nparazitů na obsahy kovů ve tkáních hostitele. U některých parazitů ryb byl zjištěn řádový nárůst\nobsahu kovů ve tkáních parazitu, který vedl k uvažování možnosti užití právě parazitů jako\nindikátoru znečištění. Small wild mammals living at contaminated soil are exploited for monitoring of their metal and\nmetallothionein (MT) levels, which can be influenced by presence of parasites. This has been\ntested in laboratory experiment with white rats (Rattus norvegicus) infected with tapeworm\nHimenolepis diminuta and given diet enriched with lead or zinc. The influence of parasite was\nconfirmed with analysis of samples, where metal concentrations in infected groups were\nlowered in comparison with the uninfected rats. Within infected groups, tapeworms MT levels\nwere 6 or 3 times higher than MT in tapeworms of the control group. Obtained results support\npossibility of using MT concentration in Himenolepis diminuta for biomonitoring. Keywords: metallothioneins; lead; zinc; rats Available on request at various institutes of the ASCR
Metalothioneiny jako biomarkery znečištění životního prostředí

Sledování obsahu metalothioneinů jako biomarkeru znečištění vodního prostředí je\npředmětem řady studií i mezinárodního programu (Mediterranean Action Plan of The United\nNations Environment Program, ...

Šestáková, Ivana; Křivská, D.; Navrátil, Tomáš
Ústav fyzikální chemie J. Heyrovského, 2021

Voltametrické stanovení těžkých kovů ve včelím jedu za použití rtuťové kapkové elektrody a uhlíkového vodivého filamentu pro 3D tisk
Navrátil, Tomáš; Choińska-Mlynarczyk, Marta; Šestáková, Ivana; Hrdlička, Vojtěch
2021 - Czech
Včelí jed představuje sekret z jedového ústrojí včelích dělnic nebo včelí matky (nikoliv trubců).\nSmrtelná dávka pro člověka je asi 400-700 žihadel, LD50 myší i.v.=0,6 mg/kg. Po vysušení\nvzniká světle žlutý, velmi jemný prášek. Je rozpustný ve vodě za vzniku opaleskujícího roztoku.\nTypické složení (procenta představují podíl látky v sušině):\n -50-55 % silně bazický polypeptid melitin (poškozuje červené i bílé krvinky), 2-3 %\nappamin (vliv na nervovou soustavu), MCD (mast cell degranulating) peptid (narušuje\nčinnost buněčných membrán,\n Enzymy: 13-14 % fosfolypáza A a B, 2-3 % hyaluronidáza,\n Biogenní aminy: histamin, dopamin, noradrenalin.\nKromě výše uvedených látek jsou v jedu, podobně jako ve včelím medu, obsaženy látky, se\nkterými přichází tento blanokřídlý hmyz do styku během svého života. Jedná se tedy i o těžké\nkovy, kterými je kontaminováno naše životní prostředí. Analýza včelího jedu včel\nmedonosných žijících ve zvolené oblasti může tedy poskytnout informaci o plošném znečištění\npoměrně velké oblasti. Heavy metals belong to typical contaminants of our environment. It is known that they are\nmetabolized and incorporated into bee products as honey as well as honeybee venom (apitoxin).\nIt is supposed that their composition can reflect contamination of the “bee environment” and\ncan give us information about the environment in the neighborhood of human dwellings.\nThis study aimed to develop a simple method for the determination of heavy metals in honeybee\nvenom. Due to the complicated matrix, wet microwave mineralization with sulfuric acid, nitric\nacid, under increased temperature and pressure, and repeated boiling with concentrated nitric\nacid had to be applied. Voltammetry proved to be very suitable for the determination of heavy\nmetals.\nTwo types of working electrodes have been used: pen-type hanging mercury drop electrode and\ncarbon conductive filaments for 3D printers. Results achieved using both of them and their\nadvantages and limitations have been compared. Keywords: anodic stripping voltammetry; heavy metals; honeybee venom Available on request at various institutes of the ASCR
Voltametrické stanovení těžkých kovů ve včelím jedu za použití rtuťové kapkové elektrody a uhlíkového vodivého filamentu pro 3D tisk

Včelí jed představuje sekret z jedového ústrojí včelích dělnic nebo včelí matky (nikoliv trubců).\nSmrtelná dávka pro člověka je asi 400-700 žihadel, LD50 myší i.v.=0,6 mg/kg. Po vysušení\nvzniká ...

Navrátil, Tomáš; Choińska-Mlynarczyk, Marta; Šestáková, Ivana; Hrdlička, Vojtěch
Ústav fyzikální chemie J. Heyrovského, 2021

Rozdíly v elektrochemické redukci jedno- a vícejaderných acylgermanů
Šimková, Ludmila; Dunlop, David; Liška, Alan; Ludvík, Jiří
2021 - Czech
Derivaty titanocenu nachazeji bohate vyuziti jako katalyzatory pri cele fade chemickych\ntransformaci. Nicmene v posledni dobe se zkouma i jejich potencialni vyuziti jako cytostatik\npri lecbe onkologickych onemocneni. Nedavne studie poukazaly na vyssi cytotoxicitu u cele\nfady titanocen difluoridovych derivatu v porovnani s jejich dichloridovymi analogy.\nNasledne zkoumani mechanismu ucinku titanocemi poukazalo na rozpad endoplasmatickeho\nretikula rakovinnych bunek pusobenim reaktivnich kyslikovych castic (ROS). Tyto castice\ngenerovane pomoci redoxne aktivnich kovu (v nasem pripade titanocenu) muzou byt ucinnym\nprostredkem pro selektivni likvidaci rakovinovych bunek, jejichz homeostaza je na pritomnost\nROS citlivejsi V porovnani se zdravymi bunkami. Recently, titanocene derivatives have been investigated in term of their potential use as\ncytostatics in the treatment of oncological diseases. The potentials for reduction or oxidation of\nindividual substances are one of the key properties which fundamentally affect the cytostatic\nefficiency. Our previous results led us to investigate the redox properties of series of titanocene\ndifluoride and dichloride derivatives. This study is mainly focused on the effect of the\nsubstitution of cyclopentadienyl ring and the halide anion on the redox properties of the\nderivative. Keywords: Titanocene derivatives; Tuning of redox behavior; Substitution of cyclopentadienyl ring Available on request at various institutes of the ASCR
Rozdíly v elektrochemické redukci jedno- a vícejaderných acylgermanů

Derivaty titanocenu nachazeji bohate vyuziti jako katalyzatory pri cele fade chemickych\ntransformaci. Nicmene v posledni dobe se zkouma i jejich potencialni vyuziti jako cytostatik\npri lecbe ...

Šimková, Ludmila; Dunlop, David; Liška, Alan; Ludvík, Jiří
Ústav fyzikální chemie J. Heyrovského, 2021

ELECTROCHEMICAL STUDY OF CuSCN INORGANIC HOLE-TRANSPORT MATERIAL FOR SOLAR CELLS PREPARED BY ELECTRODEPOSITION FROM AQUEOUS SOLUTION
Vlčková Živcová, Zuzana; Mansfeldová, Věra; Bouša, Milan; Kavan, Ladislav
2021 - English
A comparative study is reported for electrodeposited copper(I) thiocyanate layers (ca. 500 nm) on two types of conductive/semiconductive substrates: i) carbon (boron-doped diamond_BDD, glass-like carbon_GC), and ii) carbon-free F-doped SnO2 conducting glass (FTO). SEM and Raman evidence that electrodeposition from aqueous solution results in homogenous CuSCN layers with dominant thiocyanate ion bounded to copper through its S-end (Cu−SCN bonding), as in spin-coated CuSCN layers. Electrochemical impedance spectroscopy (EIS) confirms the p-type semiconductivity of layers with a flatband potential from 0.1 to 0.18 V vs. Ag/AgCl depending on the substrate type, and the acceptor concentration (NA) of 5 x 1020cm-3 in all cases. The flatband potentials determined from Mott-Schottky plots (EIS) are in good agreement with the Kelvin probe measurements. The blocking quality of CuSCN layers was tested using Ru(NH3)63+/2+ redox probe. CuSCN deposited on BDD substrate exhibits better blocking properties compared to CuSCN deposited on FTO. Keywords: electrodeposition; CuSCN; hole transport material Available in digital repository of the ASCR
ELECTROCHEMICAL STUDY OF CuSCN INORGANIC HOLE-TRANSPORT MATERIAL FOR SOLAR CELLS PREPARED BY ELECTRODEPOSITION FROM AQUEOUS SOLUTION

A comparative study is reported for electrodeposited copper(I) thiocyanate layers (ca. 500 nm) on two types of conductive/semiconductive substrates: i) carbon (boron-doped diamond_BDD, glass-like ...

Vlčková Živcová, Zuzana; Mansfeldová, Věra; Bouša, Milan; Kavan, Ladislav
Ústav fyzikální chemie J. Heyrovského, 2021

Preparation, Testing and Application of Amalgam Screen-Printed Electrodes
Josypčuk, Bohdan; Langmaier, Jan; Tvorynska, Sofiia
2021 - English
Silver amalgam screen-printed electrodes (AgA-SPEs) were designed, prepared, and tested for\nthe first time as perspective representatives among SPEs for measuring at high negative\npotentials. The precise coulometric preparation procedure for mercury deposition at the\nworking electrode surface of the commercial silver-SPE was developed. An optimal\nelectrolyzer construction for the mercury deposition, electrolyte composition, and electrolysis\nconditions were proposed. The maximum value of hydrogen overvoltage (-1979 ± 4 mV) was\nfound on AgA-SPE with 50% (w/w) of Hg content in 0.1 mol L-1 NaOH, which is more negative\nthan with the original silver-SPE for 387 mV (-1592 ± 12 mV). Keywords: electrochemistry; screen-printed electrodes; silver amalgam Available on request at various institutes of the ASCR
Preparation, Testing and Application of Amalgam Screen-Printed Electrodes

Silver amalgam screen-printed electrodes (AgA-SPEs) were designed, prepared, and tested for\nthe first time as perspective representatives among SPEs for measuring at high negative\npotentials. The ...

Josypčuk, Bohdan; Langmaier, Jan; Tvorynska, Sofiia
Ústav fyzikální chemie J. Heyrovského, 2021

About project

NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web

Send your suggestions and comments to nusl@techlib.cz

Provider

http://www.techlib.cz

Facebook

Other bases