Number of found documents: 1019
Published from to

NUMERICAL STUDY OF UNIVERSAL BEAM (I SECTION) UNDER BENDING LOAD WITH CRACK
Morán, Alvarez J.; Seitl, Stanislav; Miarka, Petr
2020 - English
The structural components often contain cracks as a results of applied load. Therefore, these cracks must be studied how they affect the structural behavior and the total service life-time of the component. Bearing beams of the bridges have usually cross-section in the shape of an I-profile. In this contribution, a numerical parametric model was made in order to study the influence of the crack length, Poisson's ratio and web thickness on the stress distribution in the structural element, for which a three-point bending specimen was applied. The model is based on the linear elastic fracture mechanics (LEFM), with focus set on the determination of the stress intensity factor, as it is one of the main parameters used in the description of the stress fields in vicinity of the crack tip. Keywords: Stress Intensity Factor; Linear Elastic Fracture Mechanics; Finite Element Method; I-Profile; Poisson's ratio Available at various institutes of the ASCR
NUMERICAL STUDY OF UNIVERSAL BEAM (I SECTION) UNDER BENDING LOAD WITH CRACK

The structural components often contain cracks as a results of applied load. Therefore, these cracks must be studied how they affect the structural behavior and the total service life-time of the ...

Morán, Alvarez J.; Seitl, Stanislav; Miarka, Petr
Ústav fyziky materiálů, 2020

DETEKCE PORUCH POMOCÍ AKUSTICKÉ EMISE (AE) V PODMÍNKÁCH VYSOKOTEPLOTNÍHO CREEPU
Dvořák, Jiří; Sklenička, Václav; Král, Petr; Kvapilová, Marie; Svobodová, M.; Šifner, J.; Koula, V.
2019 - Czech
Současné aplikace akustické emise (AE) jsou přednostně orientovány na průběžný monitoring provozu strojních komponent. AE je perspektivní nedestruktivní metodou pro včasnou predikci a identifikaci poruch materiálu dříve než dojde k havárii sledovaných zařízení. Příspěvek analyzuje naměřená data a rozbor signálů na úrovni jednotlivých emisních událostí v průběhu creepové zkoušky mědi na základě výsledků předchozí mikrostrukturní a fraktografické analýzy jejího creepového porušení a lomu. Cílem modelové studie je přispět k úspěšné aplikaci AE pro reálné provozní komponenty energetických zařízení a tím ke zvýšení jejich provozní bezpečnosti. Current acoustic emission (AE) applications are preferably oriented to continuous monitoring of machine component operation. AE is a perspective non-destructive method for early prediction and identification of material defects to avoid a disaster of running equipment. The paper analyzes the measured data and analysis of signals at the level of individual emission events during the creep test of a copper based on the results of previously performed microstructural and fractographic analyses of its creep damage evolution and fracture. The aim of the model study is to contribute to the successful application of AE for real operating components of power equipments and thus to increase their operational safety. Keywords: Acoustic emission; creep; coper Available at various institutes of the ASCR
DETEKCE PORUCH POMOCÍ AKUSTICKÉ EMISE (AE) V PODMÍNKÁCH VYSOKOTEPLOTNÍHO CREEPU

Současné aplikace akustické emise (AE) jsou přednostně orientovány na průběžný monitoring provozu strojních komponent. AE je perspektivní nedestruktivní metodou pro včasnou predikci a identifikaci ...

Dvořák, Jiří; Sklenička, Václav; Král, Petr; Kvapilová, Marie; Svobodová, M.; Šifner, J.; Koula, V.
Ústav fyziky materiálů, 2019

WE43 BIOCOMPATIBLE ALLOY AFTER SEVERE PLASTIC DEFORMATION: STRUCTURE CHARACTERIZATION
Kunčická, Lenka; Král, Petr; Dvořák, Jiří; Kocich, R.
2019 - English
The report presents results of the analyses of biocompatible WE 43 Mg-based alloy processed by friction stir processing (FSP) at two different rotational speeds of 400 RPM, and 1200 RPM. The structures were observed by scanning electron microscopy (SEM), electron backscattered diffraction (EBSD). Observations were primarily focused on characterizations of grains and textures, supplementary testing of mechanical properties was performed via tensile tests. The results of low angle grain boundaries fractions and grain sizes showed that both the processing methods led to significant grain refinement and recrystallization, the average grain diameter within the 1200 RPM sample was less than 2 μm. Texture observations showed slight tendencies of the grains to align in the {0001}〈101̅0〉 and {0001}〈112̅0〉 preferential orientations, however, the maximum intensities were only about two times random. Supplementary tensile tests confirmed the positive effects of FSP on structures and properties of both the samples. Keywords: Magnesium alloys; texture; scanning electron microscopy; X-ray diffraction Available at various institutes of the ASCR
WE43 BIOCOMPATIBLE ALLOY AFTER SEVERE PLASTIC DEFORMATION: STRUCTURE CHARACTERIZATION

The report presents results of the analyses of biocompatible WE 43 Mg-based alloy processed by friction stir processing (FSP) at two different rotational speeds of 400 RPM, and 1200 RPM. The ...

Kunčická, Lenka; Král, Petr; Dvořák, Jiří; Kocich, R.
Ústav fyziky materiálů, 2019

HYDROGEN SORPTION IN ORDERED Mg-In ALLOYS
Čermák, Jiří; Král, Lubomír; Roupcová, Pavla
2019 - English
Hydrogen storage (HS) performance of three Mg- x In- y CB alloys (CB - amorphous carbon, x = 55, 64, 73 y =\n10 wt%) was studied. Indium concentration covered an area of ordered β structures. Alloys were prepared by\nball-milling in hydrogen atmosphere. Kinetic curves and PCT isotherms were measured in the temperature\ninterval from 200 °C to 325 °C. X-ray diffraction spectroscopy (XRD) was used for structure investigation. Alloy\nwith x = 73 wt% In ( β ’’ structure) showed reversible amorphization during temperature cycling between about\n100 °C and 350 °C. Hydrogen sorption experiments were done by the Sieverts method under the hydrogen\ngas pressure ranging from 0.1 MPa to 2.5 MPa. It was found that hydrogen sorption capacity varied between\n0.47 and 1.1 wt% H 2 . Hydride formation enthalpy ∆H calculated from desorption PCT experiments was\nsignificantly lower than ∆H , known for pure Mg. This invoked an idea that atomic order of Mg-based HS\nmaterials might decrease the high thermodynamic stability of hydride phase. Keywords: Hydrogen storage; Mg alloys; hydride stability; ordering Available at various institutes of the ASCR
HYDROGEN SORPTION IN ORDERED Mg-In ALLOYS

Hydrogen storage (HS) performance of three Mg- x In- y CB alloys (CB - amorphous carbon, x = 55, 64, 73 y =\n10 wt%) was studied. Indium concentration covered an area of ordered β structures. Alloys ...

Čermák, Jiří; Král, Lubomír; Roupcová, Pavla
Ústav fyziky materiálů, 2019

Effect of casting conditions and heat treatment on high temperature low cycle fatigue performance of nickel superalloy Inconel 713LC
Šulák, Ivo; Obrtlík, Karel; Hrbáček, Karel
2019 - English
The present work is focused on the study of high temperature low cycle fatigue behaviour of Inconel 713LC produced by a vibratory investment casting (VIC) in as-cast conditions and in the condition after heat treatment (HT) consisting of hot isostatic pressing (HIP) followed by precipitation hardening. Low cycle fatigue tests were carried out on cylindrical specimens in symmetrical push-pull cycle under strain control with constant total strain amplitude and strain rate at 800 °C in air. Hardening/softening curves and fatigue life curves of both materials were assessed and compared with data of Inconel 713LC produced by a conventional investment casting (CIC). Cyclic hardening can be observed in the high amplitude domain while saturated stress response is apparent for low amplitude cycling for all material batches. Data presented in Basquin representation show an increase in fatigue life of both VIC batches compared to the CIC batch, however, no effect of HT on fatigue life of Inconel 713LC produced by VIC was observed. In contrast, the heat treated Inconel 713LC demonstrates slightly higher fatigue life in Coffin-Manson representation. The microstructure of both superalloys was studied by means of scanning electron microscopy (SEM). The microstructure of superalloy is characterized by dendritic grains with casting defects. It comprises the γ matrix, cubic γ´ precipitates, eutectics and carbides. The effect of the VIC and HT on fatigue performance and microstructure of Inconel 713LC is discussed. Keywords: Inconel 713LC; vibratory investment casting; hot isostatic pressing; high temperature low cycle fatigue; stress-strain response Available at various institutes of the ASCR
Effect of casting conditions and heat treatment on high temperature low cycle fatigue performance of nickel superalloy Inconel 713LC

The present work is focused on the study of high temperature low cycle fatigue behaviour of Inconel 713LC produced by a vibratory investment casting (VIC) in as-cast conditions and in the condition ...

Šulák, Ivo; Obrtlík, Karel; Hrbáček, Karel
Ústav fyziky materiálů, 2019

PILOT ANALYSIS OF CHEVRON NOTCH LIGAMENT AREA FOR APPLICATION\nON QUASI-BRITTLE MATERIALS
Seitl, Stanislav; Růžička, P.; Miarka, P.; Sobek, J.
2018 - English
Specimens for the bending tests with the chevron notch are standardized for the\nevaluation of the fracture toughness of various materials. The main advantage of this test\nset-up is that no sharp pre-crack has to be introduced, because a sharp crack is formed\nduring loading at the beginning of the test. Furthermore, no crack length measurement is\nrequired, and a stable crack growth can be reached due to geometry of the notch. In this\ncontribution a difference of the ligament area of the specimens with the straight through\nnotch and the chevron notch was investigated Keywords: Fracture mechanics; chevron notch; ligament area; work of fracture; straight notch; blunt Available at various institutes of the ASCR
PILOT ANALYSIS OF CHEVRON NOTCH LIGAMENT AREA FOR APPLICATION\nON QUASI-BRITTLE MATERIALS

Specimens for the bending tests with the chevron notch are standardized for the\nevaluation of the fracture toughness of various materials. The main advantage of this test\nset-up is that no sharp ...

Seitl, Stanislav; Růžička, P.; Miarka, P.; Sobek, J.
Ústav fyziky materiálů, 2018

Study of mechanical properties of nanolayered Ti/Ni coatings
Zábranský, L.; Václavík, R.; Přibyl, R.; Ženíšek, J.; Souček, P.; Buršík, Jiří; Fořt, Tomáš; Buršíková, V.
2018 - English
The aim of the present work was to study the dependence of mechanical properties of Ti/Ni multilayer thin films on the thicknesses of constituent Ti and Ni layers. The multilayer thin films were synthesized by deposition of Ti and Ni layers alternately on single crystalline silicon substrates using direct current magnetron sputtering method. Thicknesses of Ti and Ni layers varied from 1.7 nm to 100 nm. The micro-structure of the multilayer films was studied using X-ray diffraction technique, scanning electron microscopy with focused ion beam technique and transmission electron microscopy. Mechanical properties obtained from nanoindentation experiments were discussed in relation to microstructural observations. Keywords: Ti/Ni; multilayers; magnetron sputtering; nanoindentation; TEM Available at various institutes of the ASCR
Study of mechanical properties of nanolayered Ti/Ni coatings

The aim of the present work was to study the dependence of mechanical properties of Ti/Ni multilayer thin films on the thicknesses of constituent Ti and Ni layers. The multilayer thin films were ...

Zábranský, L.; Václavík, R.; Přibyl, R.; Ženíšek, J.; Souček, P.; Buršík, Jiří; Fořt, Tomáš; Buršíková, V.
Ústav fyziky materiálů, 2018

HIGH - TEMPERATURE CREEP BEHAVIOUR OF CAST COBALT-BASE SUPERALLOYS
Dvořák, Jiří; Král, Petr; Kvapilová, Marie; Hrbáček, Karel; Sklenička, Václav
2018 - English
Two cast and heat-treated NbC and TaC – strengthened cobalt superalloys have been developed for a precision casting of spinner discs for glass wool industry. In this work constant load creep tests in tension were carried out in argon atmosphere at three testing temperature 900, 950 and 1000 °C and at the initial applied stresses ranged from 40 to 200 MPa. All the tests were continued until the final fracture. The results of creep testing were combined with microstructural and fractographic examinations by means of light and scanning electron microscopy. A mutual comparison of creep characteristics of the investigated superalloys under comparable creep loading conditions showed that NbC-strengthened superalloy exhibited longer creep life than TaC-strengthened one. Further, it was found that carbide precipitation is the primary strengthening mechanism in both cobalt-base superalloys under investigation and the amount, morphology\nand type of carbides have the decisive effect on the creep properties including creep damage and fracture processes. By contrast, NbC-superalloy exhibited a more brittle character of creep fracture mode than TaCstrengthened superalloy. This study was initiated to investigate in more details creep deformation processes and the effect of the creep microstructure and damage evolution on both investigated superalloys. The different behaviour and properties of studied superalloys were explained based on the received results of this study. Keywords: Co-based superalloys; creep tests; microstructure evolution; carbide precipitation; damage process Available at various institutes of the ASCR
HIGH - TEMPERATURE CREEP BEHAVIOUR OF CAST COBALT-BASE SUPERALLOYS

Two cast and heat-treated NbC and TaC – strengthened cobalt superalloys have been developed for a precision casting of spinner discs for glass wool industry. In this work constant load creep tests in ...

Dvořák, Jiří; Král, Petr; Kvapilová, Marie; Hrbáček, Karel; Sklenička, Václav
Ústav fyziky materiálů, 2018

INFLUENCE OF GRAPHITE UPON THE KINETICS OF HYDROGEN SORPTION IN Mg@Mg17Al12
Čermák, Jiří; Král, Lubomír; Roupcová, Pavla
2018 - English
Influence of graphite addition to the ball-milling charge composed of Mg splinters and Mg17Al12 particles upon the hydrogen sorption was investigated at sorption temperature 623 K. Measurements were carried out by Sieverts method. Graphite facilitates the ball-milling: It prevents re-agglomeration of crushed particles into large secondary particles. It also suppresses sticking the milled material to the balls and walls of the milling jar. It was found that an increase of carbon concentration up to a certain limit c(L) lying between 14 and 23 wt. % C, carbon increases both the absorption and the desorption rates and hydrogen storage capacity. Above c(L), carbon causes a considerable decrease in HS capacity, which spoils the application potential of Mg@Mg17Al12/C. Crystallite size of the material under study, obtained by XRD, is in the order of tens of nm. Keywords: storage; Hydrogen storage; Mg alloys; graphite Available at various institutes of the ASCR
INFLUENCE OF GRAPHITE UPON THE KINETICS OF HYDROGEN SORPTION IN Mg@Mg17Al12

Influence of graphite addition to the ball-milling charge composed of Mg splinters and Mg17Al12 particles upon the hydrogen sorption was investigated at sorption temperature 623 K. Measurements were ...

Čermák, Jiří; Král, Lubomír; Roupcová, Pavla
Ústav fyziky materiálů, 2018

ESTIMATION OF EQUILIBRIUM HYDROGEN PRESSURE - A NEW METHOD
Čermák, Jiří; Král, Lubomír
2018 - English
A new method is proposed to estimation of hydrogen pressure in equilibrium with hydride phase in a hydrogen\nstorage material. It is applicable both for hydrogen absorption and desorption in cases where the hydride phase\nis formed by nucleation and growth mechanism. The proposed method saves considerably the experimental\ntime replacing the conventional time consuming measurement of pressure-composition isotherms, the so\ncalled PCT curves. The proposed evaluation procedure is illustrated using hydrogen chemi-sorption at\ntemperatures 623 K, 573 K and 523 K in chosen hydrogen storage alloys Mg-Si-C, Mg-Li-C and Mg-Na-C. Keywords: Hydrogen storage; magnesium; new method Available at various institutes of the ASCR
ESTIMATION OF EQUILIBRIUM HYDROGEN PRESSURE - A NEW METHOD

A new method is proposed to estimation of hydrogen pressure in equilibrium with hydride phase in a hydrogen\nstorage material. It is applicable both for hydrogen absorption and desorption in cases ...

Čermák, Jiří; Král, Lubomír
Ústav fyziky materiálů, 2018

About project

NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web

Send your suggestions and comments to nusl@techlib.cz

Provider

http://www.techlib.cz

Facebook

Other bases