Used filters (1)  Zrušit všechna omezení
Number of found documents: 34400
Published from to

Investigation of Mechanical Processing of Solar Photovoltaic Panels
Šperlich, Antonín
2024 - English
This work aims to describe the possibilities of mechanical treatment of solar photovoltaic panels. In the first part, the shredding and milling process for the transformation of the product (whole panel) into material that can be further processed, was investigated. Milled material was sieved and analyzed. It was observed that this shredding also works as a selective grinding because three main products were produced. The second part of this work was aimed at the physical concentration of silver in real samples of milled solar photovoltaic panels by Knelson separator. This device (type of centrifugal separator) showed the ability to significantly increase the amount of silver in the outcome stream. Keywords: solar photovoltaic panels; selective milling; Knelson Available in a digital repository NRGL
Investigation of Mechanical Processing of Solar Photovoltaic Panels

This work aims to describe the possibilities of mechanical treatment of solar photovoltaic panels. In the first part, the shredding and milling process for the transformation of the product (whole ...

Šperlich, Antonín
Ústav chemických procesů, 2024

Axial Dispersion and Mass Transfer in Bubble Column
Terentyak, Mark
2024 - English
The objective of the study is to experimentally investigate axial dispersion and mass transfer within a bubble column, examining their mutual interrelation\nand their correlation with operational parameters and AR1. Keywords: bubble column; axial dispersion; mass transfer Available in a digital repository NRGL
Axial Dispersion and Mass Transfer in Bubble Column

The objective of the study is to experimentally investigate axial dispersion and mass transfer within a bubble column, examining their mutual interrelation\nand their correlation with operational ...

Terentyak, Mark
Ústav chemických procesů, 2024

Exploring Bubble Dynamics with VOF Method Simulations: Insights from Two Fundamental Gas-Liquid Flow Case Studies
Harrandt, Václav
2024 - English
The present study focuses on the flow of Taylor bubbles, representing the interaction between the channel wall and the gas phase, and the collision of\na bubble with a vortex ring, serving as a model liquid-gas interaction. Understanding the former case can be essential to prevent the membrane\nfouling or the flow induced corrosion. The dynamics of the latter case is the predictive criterion for whether the initial mother bubble will break up into the daughter bubbles or not2 and this process can therefore be used as an idealized model of turbulent bubble flow. Keywords: bubble dynamics; multiphase interaction,; numerical simulation Available in a digital repository NRGL
Exploring Bubble Dynamics with VOF Method Simulations: Insights from Two Fundamental Gas-Liquid Flow Case Studies

The present study focuses on the flow of Taylor bubbles, representing the interaction between the channel wall and the gas phase, and the collision of\na bubble with a vortex ring, serving as a model ...

Harrandt, Václav
Ústav chemických procesů, 2024

Flow simulations approach for flocculation tanks
Idžakovičová, Kristýna; Bílek, V.; Haidl, J.; Isoz, Martin; Pivokonský, M.
2024 - English
Flocculation in water treatment facilities plays a key role in the separation of colloidal inorganic and organic substances. Its optimization leads to a significant increase in its efficiency and savings of operational costs. However, it is currently based on trial-and-error experimental approaches. In this contribution, we focus on flow modeling in stirred flocculation tanks that would, after coupling with a calibrated model of particle aggregation, enable simulationbased flocculation optimization. Despite the abundance of literature on stirred tank modeling, there is no universal agreement on the methodology used to describe turbulence nor on the approach to the computational mesh creation. Consequently, there is no unified methodology for simulations and their validation. To address this, we present a best-practice methodology for economical, yet reliable flow simulations in the said device. This methodology includes the choice of the turbulence model, the approach to the design of a high quality mesh suitable for arbitrary geometries, and results evaluation. It is developed based on an extensive literature review, a multitude of flow simulations using several meshes of progressively higher quality and resolution, and various strategies to converge to steady-state flow conditions. The simulation quality indicators used here involve comparison with the experimental data on fluid velocity, stirrer power output, and flow rate through the impeller zone. Additionally, the resulting flow simulation models are compared using tracer transport simulations, hinting at their potential for coupling with particle aggregation models. Keywords: flocculation tank; stirring; MRF; CFD; OpenFOAM Available at various institutes of the ASCR
Flow simulations approach for flocculation tanks

Flocculation in water treatment facilities plays a key role in the separation of colloidal inorganic and organic substances. Its optimization leads to a significant increase in its efficiency and ...

Idžakovičová, Kristýna; Bílek, V.; Haidl, J.; Isoz, Martin; Pivokonský, M.
Ústav termomechaniky, 2024

Improvement of an unbaffled stirred tank mixing characteristics using variable speed impeller
Gebouský, Ondřej; Haidl, Jan; Bodnár, J.; Pivokonský, Martin
2024 - English
Unbaffled mixing tanks with magnetically driven impellers are increasingly used in biotechnological and pharmaceutical industries, combining the benefits of a closed, sterile environment with easy equipment cleanability. On the other hand, missing internals, such as baffles or cooling coils, have an adverse effect on the equipment mixing characteristics, namely the batch\nhomogenization time. In our previous research, we uncovered that the eccentricity and inclination of the impeller – both employed routinely to enhance the mixing characteristics of unbaffled vessels – are not fully effective in the suppression of central vortex formation resulting in the increase in the homogenization time. In this work, we propose a simple solution to counteract the central vortex formation – a periodical variation of impeller rotational speed. This approach destabilizes the central vortex, significantly reducing homogenization time while maintaining the benefits of the original unbaffled setup. This innovation can seamlessly integrate into existing industrial setups, promising efficiency gains for biotech and pharmaceutical production. Keywords: unbaffled mixing tanks; variable rotational speed; vortex destabilization; mixing time improvement Available in digital repository of the ASCR
Improvement of an unbaffled stirred tank mixing characteristics using variable speed impeller

Unbaffled mixing tanks with magnetically driven impellers are increasingly used in biotechnological and pharmaceutical industries, combining the benefits of a closed, sterile environment with easy ...

Gebouský, Ondřej; Haidl, Jan; Bodnár, J.; Pivokonský, Martin
Ústav pro hydrodynamiku, 2024

Práce prostřednictvím platforem
Výzkumný ústav bezpečnosti práce, v. v. i.
2024 - Czech
Ekonomika digitálních platforem v EU i ČR roste. V průběhu pandemie covidu-19 nabrala tato práce na dynamice a stala se běžnou záležitostí. Digitální pracovní platformy používají algoritmy pro řízení lidských zdrojů. Keywords: platformy; digitalizace; online platformy Available in a digital repository NRGL
Práce prostřednictvím platforem

Ekonomika digitálních platforem v EU i ČR roste. V průběhu pandemie covidu-19 nabrala tato práce na dynamice a stala se běžnou záležitostí. Digitální pracovní platformy používají algoritmy pro řízení ...

Výzkumný ústav bezpečnosti práce, v. v. i.
Výzkumný ústav bezpečnosti práce, v.v.i., 2024

Monitoring chemismu srážkových vod na území NPČS. Závěrečná zpráva za rok 2023-2024
Navrátil, Tomáš; Dobešová, Irena; Rohovec, Jan
2024 - Czech
Keywords: deposition; bulk precipitation; acidificants; main elements; throughfall Available at various institutes of the ASCR
Monitoring chemismu srážkových vod na území NPČS. Závěrečná zpráva za rok 2023-2024

Navrátil, Tomáš; Dobešová, Irena; Rohovec, Jan
Geologický ústav, 2024

Kultura České republiky v číslech 2023:
Dedera, Milan; NIPOS, Národní informační a poradenské středisko pro kulturu
2024 - Czech
Statistika kultury se zabývá zjišťováním údajů o činnosti kulturních subjektů (např. návštěvnost, kapacita, vzdělávací akce, vydané publikace, výpůjčky, čtenáři). V předkládané brožuře jsou zveřejněny vybrané údaje za následující obory: divadlo, galerie, muzea a památníky, hvězdárny, planetária a astronomické pozorovatelny, veřejné knihovny, památkové objekty zpřístupněné za vstupné, neperiodické publikace a periodický tisk. Údaje ekonomické povahy jsou k dispozici pouze za subjekty veřejného sektoru, kulturní subjekty v soukromém sektoru je neposkytují. Keywords: divadelní představení; galerie; hudební tělesa; knihovny; kultura a společnost; muzea; nakladatelství; návštěvnost; památkové objekty; statistika; umění a společnost; výstavnictví; ancient monuments; art and society; culture and society; ensembles; galleries; libraries; museums; numbers of visitors; organization of exhibitions; publishing houses; statistics; theatrical perfomances Available in a digital repository NRGL
Kultura České republiky v číslech 2023:

Statistika kultury se zabývá zjišťováním údajů o činnosti kulturních subjektů (např. návštěvnost, kapacita, vzdělávací akce, vydané publikace, výpůjčky, čtenáři). V předkládané brožuře jsou zveřejněny ...

Dedera, Milan; NIPOS, Národní informační a poradenské středisko pro kulturu
NIPOS, 2024

Finite element approximation of fluid structure interaction using Taylor-Hood and Scott-Vogelius elements
Vacek, Karel; Sváček, P.
2024 - English
This paper addresses the problem of fluid flow interacting a vibrating solid cylinder described by one degree of freedom system and with fixed airfoil. The problem is described by the incompressible Navier-Stokes equations written in the arbitrary Eulerian-Lagrangian (ALE) formulation. The ALE mapping is constructed with the use of a pseudo-elastic approach. The flow problem is numerically approximated by the finite element method (FEM). For discretization of the fluid flow, the results obtained by both the Taylor-Hood (TH) element and the Scott-Vogelius (SV) finite element are compared. The TH element satisfies the Babuška-Brezzi inf-sup condition, which guarantees the stability of the scheme. In the case of the SV element the mesh, that is created as a barycentric refinement of regular triangulation, is used to satisfy the Babuška-Brezzi condition. The numerical results for two benchmark problems are shown. Keywords: finite element method; arbitrary Lagrangian-Eulerian method; Scott-Vogelius element; Taylor-Hood element Available in digital repository of the ASCR
Finite element approximation of fluid structure interaction using Taylor-Hood and Scott-Vogelius elements

This paper addresses the problem of fluid flow interacting a vibrating solid cylinder described by one degree of freedom system and with fixed airfoil. The problem is described by the incompressible ...

Vacek, Karel; Sváček, P.
Matematický ústav, 2024

Paralely a odlišnosti sociálních situací s panickým potenciálem - IMPAKT 2023
Červenka, Jan; Vinopal, Jiří
2024 - Czech
Výzkumná zpráva s hlavními výsledky dotazníkových šetření provedených v rámci projektu „Paralely a odlišnosti sociálních situací s panickým potenciálem - příklad RMU a pandemie koronaviru v české společnosti“ v roce 2023. A research report with main outputs of the surveys conducted under the project „Parallels and Differences of Social Situations with Panic Potential - an example of RMU and a coronavir pandemic in Czech society“ in 2023. Keywords: social panic; radiation; citizen science Available at various institutes of the ASCR
Paralely a odlišnosti sociálních situací s panickým potenciálem - IMPAKT 2023

Výzkumná zpráva s hlavními výsledky dotazníkových šetření provedených v rámci projektu „Paralely a odlišnosti sociálních situací s panickým potenciálem - příklad RMU a pandemie koronaviru v české ...

Červenka, Jan; Vinopal, Jiří
Sociologický ústav, 2024

About project

NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web

Send your suggestions and comments to nusl@techlib.cz

Provider

http://www.techlib.cz

Facebook

Other bases