No (9933)
Yes (1901)
Number of found documents:
11834
Published from
to
Numerical study of the steady airflow in the human respiratory system during inhaling and exhaling
Lancmanová, Anna; Bodnár, Tomáš
2024 - English
This paper presents some of the initial results of the numerical simulations of a steady turbulent flow in human upper airways during inhalation and exhalation. The mathematical model is based on the system of Reynolds-Averaged incompressible Navier-Stokes equations complemented by the SST k − ω turbulence model. The simulations were performed using finite-volume open source solver OpenFOAM on a realistic three-dimensional geometry. The main aim of this particular study is to verify the computational setup with special focus on appropriate choice and implementation of boundary conditions. The prescribed boundary conditions are chosen to mimic the physiological conditions during normal breathing cycle. This study aims to gain an insight into the airflow behavior during the inhalation and exhalation process by comparing the results of two distinct simulations corresponding to two different (opposite) flow rates . The obtained local flow rates and flow fields for both cases are presented and mutually compared. This initial work should serve as a foundation for future more complex simulations that will include the time-dependent and compressible effects.
Keywords:
human airways; incompressible Navier-Stokes; OpenFOAM
Available in digital repository of the ASCR
Numerical study of the steady airflow in the human respiratory system during inhaling and exhaling
This paper presents some of the initial results of the numerical simulations of a steady turbulent flow in human upper airways during inhalation and exhalation. The mathematical model is based on the ...
Verification of the dynamic properties of a new model turbine wheel with free blades
Voronova, Evgeniya; Procházka, Pavel; Maturkanič, Dušan; Mekhalfia, Mohammed Lamine; Hodboď, Robert
2024 - English
The paper describes a new experimental model of turbine wheel with free blades. Verification tests were carried out using a Doppler laser vibrometer, with a focus on the equipment parameters under various conditions. The measurements were performed in the Laboratory of Rotational Laser Vibrometry originated at the Institute of Thermomechanics AS CR, v.v.i.
Keywords:
natural frequencies; vibration; blade; laser; turbine
Available at various institutes of the ASCR
Verification of the dynamic properties of a new model turbine wheel with free blades
The paper describes a new experimental model of turbine wheel with free blades. Verification tests were carried out using a Doppler laser vibrometer, with a focus on the equipment parameters under ...
Reaction Mechanisms of Psychoactive Compounds
Sokolová, Romana; Beneš, Marek; Jiroušková, Eliška; Degano, I.
2024 - English
The reaction mechanism of selected new psychoactive substances (NPS) 4-methylpentedrone and 2-(((4-ethyl-2,5-dimethoxyphenethyl)amino)methyl)phenol was investigated based on their\nelectrochemical and spectroelectrochemical properties. Both drugs were examined by means of cyclic voltammetry using diagnostic parameters for particular reaction schemes, UV/Vis, and IR\nspectroelectrochemistry. Since water participates in the redox mechanism of both studied compounds, the reaction mechanism was studied under a controlled amount of water in an\nacetonitrile environment.
Keywords:
oxidation; reduction; IR spectrochemistry
Available on request at various institutes of the ASCR
Reaction Mechanisms of Psychoactive Compounds
The reaction mechanism of selected new psychoactive substances (NPS) 4-methylpentedrone and 2-(((4-ethyl-2,5-dimethoxyphenethyl)amino)methyl)phenol was investigated based on their\nelectrochemical and ...
Spectroelectrochemical Devices for Monitoring of Intermediates and Products on Carbonbased Composite Electrodes
Vaněčková, Eva; Šikula, M.; Hrdlička, Vojtěch; Sebechlebská, Táňa; Kolivoška, Viliam
2024 - English
Spectroelectrochemistry (SEC), as an interdisciplinary field, provides us with more comprehensive information about electroactive molecules involved in charge transfer reactions. Commercially\navailable SEC cells most often have an incorporated platinum working electrode, which can limit the range of the usable potential window and, in addition, can complicate the analysis due to the\nabsorption phenomenon. In this work, we designed and manufactured two types of custom-made SEC cells employing optically transparent carbon-based working electrodes for UV-Vis monitoring of reactants and electrogenerated intermediates and products. The first SEC cell is entirely manufactured by 3D printing using fused deposition modeling (FDM) by combining optically transparent (PET) and electrically conductive (PLA-CB) filaments. The second SEC cell employs pencil graphite (PG) rods as the working electrode (PGE) and its body is manually assembled from quartz slides. The functionality of the FDM 3D printed SEC cell and manually assembled quartz SEC cell were verified by cyclic voltammetry with in situ UV-Vis spectroscopic absorption monitoring of ruthenium(III) acetylacetonate (Ru(ac)3) redox-active probe dissolved in an aqueous or non-aqueous deaerated solvent, respectively. Both presented cells enable complete redox reversible conversion and strictly oxygen-free conditions.
Keywords:
pencil graphite electrode; spectroelectrochemistry; 3D printed electrode
Available on request at various institutes of the ASCR
Spectroelectrochemical Devices for Monitoring of Intermediates and Products on Carbonbased Composite Electrodes
Spectroelectrochemistry (SEC), as an interdisciplinary field, provides us with more comprehensive information about electroactive molecules involved in charge transfer reactions. ...
Numerical evaluation of mass-diffusive compressible fluids flows models
Bodnár, Tomáš; Fraunié, P.
2024 - English
This contribution presents first numerical tests of some recently published alternative models for solution of viscous compressible and nearly incompressible models. All models are solved by high resolution compact finite difference scheme with strong stability preserving RungeKutta time stepping. The two simple but challenging computational test cases are presented, based on the double-periodic shear layer and the Kelvin-Helmholtz instability. The obtained time-dependent flow fields are showing pronounced shear and vorticity layers being resolved by the standard as well as by the new mass-diffusive modified models. The preliminary results show that the new models are viable alternative to the well established classical models.
Keywords:
compressible Navier-Stokes; nearly incompressible flow; mass diffusion; compact finite-difference
Available in digital repository of the ASCR
Numerical evaluation of mass-diffusive compressible fluids flows models
This contribution presents first numerical tests of some recently published alternative models for solution of viscous compressible and nearly incompressible models. All models are solved by high ...
Motion of fluids in the moving domain
Nečasová, Šárka
2024 - English
It is a survay paper where the problem of the existence of weak solutions of compressible barotropic solutions in a moving bounded domain is studied.
Keywords:
compressible fluid; moving domain; weak solutions
Available in digital repository of the ASCR
Motion of fluids in the moving domain
It is a survay paper where the problem of the existence of weak solutions of compressible barotropic solutions in a moving bounded domain is studied.
PROPERTIES OF NANOCRYSTALLINE FE-NI PARTICLES PREPARED BY THERMAL REDUCTION OF OXALATE PRECURSORS
Švábenská, Eva; Roupcová, Pavla; Havlíček, Lubomír; Schneeweiss, Oldřich
2024 - English
Recent technological advancements require development of cost-effective and high-performance magnets \nwhich ideally do not contain rare earth metals or noble metals. The promising candidates are Fe-Ni-based \nalloys, in particular, the Fe50Ni50 L10 phase (tetrataenite), which has a great perspective for producing hard \nmagnetic materials. Our study explores a promising method for preparing nanoparticles of Fe-Ni alloy from an \niron-nickel oxalate precursor. The coprecipitation method was employed to prepare oxalate precursors, \nfollowed by controlled thermal decomposition in a reducing hydrogen atmosphere. The morphology and \nproperties of the resulting particles were analysed using scanning electron microscopy (SEM) coupled with \nenergy dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), Mössbauer spectroscopy (MS), and \nmagnetic measurements.\nThe SEM analysis revealed that the particles have approximately cube-shaped unit cell morphology with a\nsize in a range of 1 - 2 μm. Upon annealing, the samples contain multiple phases with varying Fe-Ni content.\nMagnetic measurements confirmed the formation of magnetically suitable Fe-Ni phases in the samples after \nannealing. Mössbauer spectroscopy emerged as a highly effective method for characterizing individual phases \nof the Fe-Ni system.
Keywords:
Magnetic materials; thermal decomposition; Mössbauer spectroscopy
Available at various institutes of the ASCR
PROPERTIES OF NANOCRYSTALLINE FE-NI PARTICLES PREPARED BY THERMAL REDUCTION OF OXALATE PRECURSORS
Recent technological advancements require development of cost-effective and high-performance magnets \nwhich ideally do not contain rare earth metals or noble metals. The promising candidates are ...
Modification of cooling system for laboratory measurement of rotor blade vibration
Maturkanič, Dušan; Procházka, Pavel; Hodboď, Robert; Voronova, Evgeniya; Mekhalfia, Mohammed Lamine
2024 - English
Last year, the replacement of the turbine wheel model was completed in the Laboratory of Rotational Laser Vibrometry of the Institute of Thermomechanics AS CR, v.v.i. Based on previous experience and the expected higher operating load planned for the new wheel, the cooling system was modified at the same time. The paper describes the main effort in this direction and the results that clarify the previous damage of the measuring device.
Keywords:
blade; vibration; cooling system; measurement; laboratory
Available at various institutes of the ASCR
Modification of cooling system for laboratory measurement of rotor blade vibration
Last year, the replacement of the turbine wheel model was completed in the Laboratory of Rotational Laser Vibrometry of the Institute of Thermomechanics AS CR, v.v.i. Based on previous experience and ...
Stochastic version of the arc-length method
Náprstek, Jiří; Fischer, Cyril
2024 - English
The solution of a nonlinear algebraic system using the incremental method, based on pre-defined loading steps, fails in the vicinity of local extrema as well as around bifurcation points. The solution involved the derivation of the so-called ’Arc-Length’ method. Its essence lies in not incrementing the system parameter or any of the independent variables but rather the length of the response curve. The stochastic variant of this method allows for working with a system where system parameters include random imperfections. This contribution presents a variant that tracks the first two stochastic moments. Even in this simple case, interesting phenomena can be observed, such as the disappearance of the energy barrier against equilibrium jump due to random imperfections in the system.
Keywords:
random imperfection; stochastic arc-length method; continuation; numerical method
Available in digital repository of the ASCR
Stochastic version of the arc-length method
The solution of a nonlinear algebraic system using the incremental method, based on pre-defined loading steps, fails in the vicinity of local extrema as well as around bifurcation points. The solution ...
Acoustic emission methods in steel bridge degradation identification and monitoring
Šorm, Filip
2024 - English
Acoustic emission methods proved to be an effective diagnostic tool in many industrial sectors. The potential of this method in the field of steel bridge diagnostics is explored in this article. The goal is to find the most effective use of this method.
Keywords:
steel bridges; diagnostics; acoustic emission
Available in digital repository of the ASCR
Acoustic emission methods in steel bridge degradation identification and monitoring
Acoustic emission methods proved to be an effective diagnostic tool in many industrial sectors. The potential of this method in the field of steel bridge diagnostics is explored in this article. The ...
NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web
Send your suggestions and comments to nusl@techlib.cz
Provider
Other bases