Ano (955)
Použitá omezení
(4)
Počet nalezených dokumentů:
955
Publikováno od
do
Motion of fluids in the moving domain
Nečasová, Šárka
2024 - anglický
It is a survay paper where the problem of the existence of weak solutions of compressible barotropic solutions in a moving bounded domain is studied.
Klíčová slova:
compressible fluid; moving domain; weak solutions
Plné texty jsou dostupné v digitálním repozitáři Akademie Věd.
Motion of fluids in the moving domain
It is a survay paper where the problem of the existence of weak solutions of compressible barotropic solutions in a moving bounded domain is studied.
Stochastic version of the arc-length method
Náprstek, Jiří; Fischer, Cyril
2024 - anglický
The solution of a nonlinear algebraic system using the incremental method, based on pre-defined loading steps, fails in the vicinity of local extrema as well as around bifurcation points. The solution involved the derivation of the so-called ’Arc-Length’ method. Its essence lies in not incrementing the system parameter or any of the independent variables but rather the length of the response curve. The stochastic variant of this method allows for working with a system where system parameters include random imperfections. This contribution presents a variant that tracks the first two stochastic moments. Even in this simple case, interesting phenomena can be observed, such as the disappearance of the energy barrier against equilibrium jump due to random imperfections in the system.
Klíčová slova:
random imperfection; stochastic arc-length method; continuation; numerical method
Plné texty jsou dostupné v digitálním repozitáři Akademie Věd.
Stochastic version of the arc-length method
The solution of a nonlinear algebraic system using the incremental method, based on pre-defined loading steps, fails in the vicinity of local extrema as well as around bifurcation points. The solution ...
Acoustic emission methods in steel bridge degradation identification and monitoring
Šorm, Filip
2024 - anglický
Acoustic emission methods proved to be an effective diagnostic tool in many industrial sectors. The potential of this method in the field of steel bridge diagnostics is explored in this article. The goal is to find the most effective use of this method.
Klíčová slova:
steel bridges; diagnostics; acoustic emission
Plné texty jsou dostupné v digitálním repozitáři Akademie Věd.
Acoustic emission methods in steel bridge degradation identification and monitoring
Acoustic emission methods proved to be an effective diagnostic tool in many industrial sectors. The potential of this method in the field of steel bridge diagnostics is explored in this article. The ...
Improving computational efficiency of contact solution in fully resolved CFD-DEM simulations with arbitrarily-shaped solids
Studeník, Ondřej; Kotouč Šourek, M.; Isoz, Martin
2023 - anglický
The abundance of industrial processes containing both solid and liquid phases generate demand for fully resolved models allowing for detailed analysis and optimization of these processes. An established approach providing such models is based using a variant of an immersed boundary method to couple the computational fluid dynamics (CFD) and discrete element method (DEM). In the talk, we will present our custom and monolithic implementation of a fully-resolved CFDDEM solver and concentrate on the intricacies of solving contact between two arbitrarily-shaped solids. We shall propose an efficient contact treatment based on the concept of a virtual mesh, which provides the mesh resolution required by DEM through dividing the space around the contact point in a finite volume fashion without any changes to the CFD mesh itself. A substantial part of the talk will devoted to the parallelization of the contact solution, especially in the context of the domain decomposition method imposed by the CFD solver.
Klíčová slova:
CFD; DEM; virtual mesh
Dokument je dostupný na externích webových stránkách.
Improving computational efficiency of contact solution in fully resolved CFD-DEM simulations with arbitrarily-shaped solids
The abundance of industrial processes containing both solid and liquid phases generate demand for fully resolved models allowing for detailed analysis and optimization of these processes. An ...
On the development of a numerical model for the simulation of air flow in the human airways
Lancmanová, Anna; Bodnár, Tomáš; Sequeira, A.
2023 - anglický
This contribution reports on an ongoing study focusing on reduced order models for incompressible viscous fluid flow in two dimensional channels. A finite difference solver was developed using a simple implementation of the immersed boundary method to represent the channel geometry. The solver was validated for unsteady flow by comparing the obtained two-dimensional numerical solutions with analytical profiles computed from the Womersley solution. Finally the 2D model was coupled to a simple 1D extension simulating the flow in axisymmetric elastic vessel (tube). Some of the coupling principles and implementation issues are discussed in detail.
Klíčová slova:
reduced order model; incompressible Navier-Stokes equations; finite difference approximation; coupling method
Plné texty jsou dostupné v digitálním repozitáři Akademie Věd.
On the development of a numerical model for the simulation of air flow in the human airways
This contribution reports on an ongoing study focusing on reduced order models for incompressible viscous fluid flow in two dimensional channels. A finite difference solver was developed using a ...
Simulating particle-laden flows: from immersed boundaries towards model order reduction
Isoz, Martin; Kubíčková, Lucie; Kotouč Šourek, M.; Studeník, Ondřej; Kovárnová, A.
2023 - anglický
Particle-laden flow is prevalent both in nature and in industry. Its appearance ranges from the trans-port of riverbed sediments towards the magma flow, from the deposition of catalytic material inside particulate matter filters in automotive exhaust gas aftertreatment towards the slurry transport in dredging operations. In this contribution, we focus on the particle-resolved direct numerical simulation (PR-DNS) of the particle-laden flow. Such a simulation combines the standard Eulerian approach to computational fluid dynamics (CFD) with inclusion of particles via a variant of the immersed boundary method (IBM) and tracking of the particles movement using a discrete element method (DEM). Provided the used DEM allows for collisions of arbitrarily shaped particles, PR-DNS is based (almost) entirely on first principles, and as such it is a truly high-fidelity model. The downside of PR-DNS is its immense computational cost. In this work, we focus on three possibilities of alleviating the computational cost of PR-DNS: (i) replacing PR-DNS by PR-LES or PR-RANS, while the latter requires combining IBM with wall functions, (ii) improving efficiency of DEM contact solution via adaptively refined virtual mesh, and (iii) developing a method of model order reduction specifically tailored to PR-DNS of particle-laden flows.
Klíčová slova:
particle-laden flow; CFD-DEM; arbitrarily-shaped particles; finite volume method
Dokument je dostupný na externích webových stránkách.
Simulating particle-laden flows: from immersed boundaries towards model order reduction
Particle-laden flow is prevalent both in nature and in industry. Its appearance ranges from the trans-port of riverbed sediments towards the magma flow, from the deposition of catalytic material ...
On Reynolds-averaged turbulence modeling with immersed boundary method
Kubíčková, Lucie; Isoz, Martin
2023 - anglický
The immersed boundary (IB) method is an approach in the computational fluid dynamics in which complex geometry conforming meshes are replaced by simple ones and the true simulated geometry is projected onto the simple mesh by a scalar field and adjustment of governing equations. Such an approach is particularly advantageous in topology optimizations (TO) where it allows for substantial speed-up since a single mesh can be used for all the tested topologies. In our previous work, we linked our custom IB variant, the hybrid fictitious domain-immersed boundary method (HFDIB), with a TO framework and successfully carried out an optimization under laminar flow conditions. However, to allow for optimizations of reallife components, the IB approach needs to be coupled with an affordable turbulence modeling. In this contribution, we focus on extending the HFDIB approach by the possibility to perform Reynolds-averaged simulations (RAS). In particular, we implemented the k − ω turbulence model and wall functions for closure variables and velocity.
Klíčová slova:
immersed boundary; RAS; wall functions; CFD; OpenFOAM
Dokument je dostupný na externích webových stránkách.
On Reynolds-averaged turbulence modeling with immersed boundary method
The immersed boundary (IB) method is an approach in the computational fluid dynamics in which complex geometry conforming meshes are replaced by simple ones and the true simulated geometry is ...
Finite element modal analysis of a silicone vocal fold filled with fluid
Hájek, P.; Radolf, Vojtěch; Horáček, Jaromír; Švec, J. G.
2023 - anglický
A three dimensional (3D) finite element (FE) model of a silicone vocal fold (VF) filled with fluid is presented here. The silicone part of the model is based on partial differential equations of the continuum mechanics and consider large deformations. The fluid domain encapsulated in the silicone VF is defined semianalytically as a lumped-element model describing the fluid in hydrostatic conditions. The elongated and pressurized silicone VF was subjected to perturbed modal analysis. Results showed that the choice of the fluid inside the VF substantially influences the natural frequencies. Namely, the water-filling lowers the natural frequencies approximately by half over the air-filling. Besides, the procedure of reverse engineering for obtaining the geometry of the VF from already 3D-printed mold is introduced.
Klíčová slova:
perturbed modal analysis; finite element method; vocal folds; reverse engineering; biomechanics of voice
Dokument je dostupný na externích webových stránkách.
Finite element modal analysis of a silicone vocal fold filled with fluid
A three dimensional (3D) finite element (FE) model of a silicone vocal fold (VF) filled with fluid is presented here. The silicone part of the model is based on partial differential equations of the ...
From John Graunt to Adolphe Quetelet: on the Origins Of Demography
Kalina, Jan
2023 - anglický
John Graunt (1620-1674) and Adolphe Quetelet (1796-1874) were two important personalities, who contributed to the origins of demography. As they both developed statistical techniques for the analysis of demographic data, they are important also from the point of view of history of statistics. The contributions of both Graunt and Quetelet especially to the development of mortality tables and models are recalled in this paper. Already from the 17th century, the available mortality tables were exploited for computing life annuities. Also the contribution of selected personalities inspired by Graunt are recalled here, the work of Christian Huygens, Jacob Bernoulli, or Abraham de Moivre is discussed to document that the historical development of statistics and probability theory was connected with the development of demography.
Klíčová slova:
history of demography; history of statistics; probability theory; moral statistics; mortality tables
Dokument je dostupný na externích webových stránkách.
From John Graunt to Adolphe Quetelet: on the Origins Of Demography
John Graunt (1620-1674) and Adolphe Quetelet (1796-1874) were two important personalities, who contributed to the origins of demography. As they both developed statistical techniques for the analysis ...
MAD UFOs: Magnetically Arrested Discs with persistent Ultra-Fast Outflows
Suková, Petra; Zajaček, M.; Karas, Vladimír
2023 - anglický
We study an outflow that develops in the MAD state in 3D GRMHD simulations. We show that the outflow can be accelerated to\nrelativistic velocities and persist over the course of our simulation. We compare the properties of the outflow from MAD discs with those launched by orbiting secondary at close orbit. The main difference is that the orbiting body launches a more coherent, quasiperiodic ultrafast outflow at lower velocities (v < 0.5c) while the outflow launched in the MAD state (without the body) has a stochastic behaviour and has anapproximately flat velocity distribution between lower anf higher outflow velocities, 0.2c < v < 0.3c and v > 0.5c.
Klíčová slova:
accretion discs; black holes; active galactic nuclei
Dokument je dostupný na externích webových stránkách.
MAD UFOs: Magnetically Arrested Discs with persistent Ultra-Fast Outflows
We study an outflow that develops in the MAD state in 3D GRMHD simulations. We show that the outflow can be accelerated to\nrelativistic velocities and persist over the course of our simulation. We ...
NUŠL poskytuje centrální přístup k informacím o šedé literatuře vznikající v ČR v oblastech vědy, výzkumu a vzdělávání. Více informací o šedé literatuře a NUŠL najdete na webu služby.
Vaše náměty a připomínky posílejte na email nusl@techlib.cz
Provozovatel
Zahraniční báze