Number of found documents: 112
Published from to

Localization of logistic centres in the Czech Republic and the decision making ways about outsourcing of logistic services
Chlaň, Alexander; Gottfried, Miroslav
2010 - English
The paper deals with the localization of logistic centers in the Czech Republic in relation to the development of transport field on European continent. Major influences on current and future building of logistic centers are dealt in the paper together with the decision making ways of outsourcing services of an external logistic services supplier or the operation of a logistic center by a private company operating in the light industry from the economic and technological point of view. Keywords: logistic centers; outsourcing; logistic services Available in digital repository of UPCE.
Localization of logistic centres in the Czech Republic and the decision making ways about outsourcing of logistic services

The paper deals with the localization of logistic centers in the Czech Republic in relation to the development of transport field on European continent. Major influences on current and ...

Chlaň, Alexander; Gottfried, Miroslav
Univerzita Pardubice, 2010

Enhancing the energy efficiency of diesel multiple units with hydrodynamic power transmission
Kache, Martin; Steglich, Uwe
2010 - English
The authors discuss the impact of several measures to save and regain energy during the operation of diesel multiple units (dmu) on regional and local railway lines. The problem of recuperating and storing kinetic energy on vehicles with hydrodynamic power transmissions as well as a strategy of using the waste heat of the diesel engine are examined. A model to simulate (hybrid) diesel hydraulic multiple units is presented, taking into account the influences of track and driver behaviour. The simulation results provided show a significant fuel saving potential for rail vehicles with hybrid drive trains. Keywords: hybrid; energy storage; waste heat recovery; simulation of rail vehicles; diesel multiple unit Available in digital repository of UPCE.
Enhancing the energy efficiency of diesel multiple units with hydrodynamic power transmission

The authors discuss the impact of several measures to save and regain energy during the operation of diesel multiple units (dmu) on regional and local railway lines. The problem of recuperating and ...

Kache, Martin; Steglich, Uwe
Univerzita Pardubice, 2010

Techniques and methodologies for railway capacity analysis: comparative studies and integration perspectives
Kontaxi, Evangelia
2010 - English
The article provides an analysis of methods and techniques for the qualification of the railway capacity, classified by reference to factors having a direct relationship with the obtained results. Synthetic, analytical and analogical methods are compared and developed. Keywords: capacity; methodologies; techniques Available in digital repository of UPCE.
Techniques and methodologies for railway capacity analysis: comparative studies and integration perspectives

The article provides an analysis of methods and techniques for the qualification of the railway capacity, classified by reference to factors having a direct relationship with the obtained results. ...

Kontaxi, Evangelia
Univerzita Pardubice, 2010

Utilization of polycomponent composites in automobile transport
Krmela, Jan; Pešlová, Františka; Tomanová, Vladimíra
2010 - English
Polycomponent composite materials for automobile transport are used in interior of automobiles and namely for tyre manufacturing. The tyres are essential elements into interactions between vehicles and roads which secured of force transmission with ability of damping of road irregularity etc. Therefore it expect from these materials with theirs excellent material parameters that will be able to good securing of observance of right function with respect to working requirements of automobile and high tyre life. The contribution deals with complex composite – tyre for its characteristic specific deformation properties. These properties are determined of construction – geometry and placement of reinforcements and also tyre materials. The computational modelling of strain-stress states of selected composite assisting to solution of right selection of optimum geometry and placing reinforcing long-filaments – cords. The authors used for computational modelling the Finite Element Method program ANSYS. The orientation is namely on materials parameters of rubber matrix and steel-cord reinforcement, which are applied into tyre casing for passenger vehicles. It is necessary to deal with materials for tyre manufacturing and also materials upon degradation action with respect to transport safety. Keywords: polycomponent; composite; tyre Available in digital repository of UPCE.
Utilization of polycomponent composites in automobile transport

Polycomponent composite materials for automobile transport are used in interior of automobiles and namely for tyre manufacturing. The tyres are essential elements into interactions between vehicles ...

Krmela, Jan; Pešlová, Františka; Tomanová, Vladimíra
Univerzita Pardubice, 2010

Small aircraft transportation system in Poland – idea and model assumptions
Marciszewska, Elžbieta; Bergel, Izabella
2010 - English
The paper presents the idea of small aircraft transportation system in Poland based on research being done within a grant of Institute of Aviation along with Warsaw School of Economics and Warsaw Institute of Technology. The final aim of this system is to provide a fast means of transport to all Polish regions, especially the provision of business trips to/from any region in Poland within one day at the cost comparable to travelling by car. Within the research on SATS there was a series of investigation on intra-regional mobility, passenger flows estimation based on income distribution, time value and intraregional mobility statistical database. Direct research (questionnaire) involved three regions, 900 respondents (households and companies). Data gathered on intra-regional mobility is a basis for modelling the demand for SATS services, including formulation of transportation task, selection of aircraft and system workings. In the final phase of research an attempt will be made at working out a comprehensive idea of SATS workings in Poland along with flight and fleet management system, flight scheduling and service marketing. It is also assumed that SATS Data Collecting and Management System (System Wide Information Management) will be established within SESAR programme by 2020. During the research on SATS in Poland research and studies carried out within EPATS (European Personal Air Transportation System) project were used. These were a part of the Sixth Framework Programme of the EU. Keywords: small aircraft transportation system; intra-regional flows; model assumptions Available in digital repository of UPCE.
Small aircraft transportation system in Poland – idea and model assumptions

The paper presents the idea of small aircraft transportation system in Poland based on research being done within a grant of Institute of Aviation along with Warsaw School of Economics and ...

Marciszewska, Elžbieta; Bergel, Izabella
Univerzita Pardubice, 2010

Innovative approach to determining railway line capacity
Mojžíš, Vlastislav; Molková, Tatiana; Bulíček, Josef
2010 - English
The contribution deals with critical assessment of used analytical and graphic-analytical methods for determining the lines capacity and of problems connected to the capacity formulation. Negative outcomes from executed case studies force us to investigate new approaches, which would result in more accurate capacity determination. Simulation models appear to be an appropriate tool allowing the investigation of the capacity of transport infrastructure in the interaction with the range of traffic. In case of incongruity between the transport infrastructure and the range of traffic operation, the implementation of various arrangements including the economical assessment can be simulated by means of scenarios. At the end of the paper a short list of the experience with the application of simulation modelling on particular lines in the Czech Republic is presented. Keywords: capacity; railway transport; infrastructure; simulation modeling Available in digital repository of UPCE.
Innovative approach to determining railway line capacity

The contribution deals with critical assessment of used analytical and graphic-analytical methods for determining the lines capacity and of problems connected to the capacity formulation. ...

Mojžíš, Vlastislav; Molková, Tatiana; Bulíček, Josef
Univerzita Pardubice, 2010

Automatic train route setting in Czech Republic
Polach, Vlastimil; Růžička, Martin
2010 - English
The operation of railway traffic from a single dispatching control centre ensures high quality of traffic management. Even better traffic control could be achieved through the automation of the dispatchers’ routine work. It saves dispatchers´ time which he can be devoted to solving conflicts caused by delayed trains. The process of planning the traffic and the execution of this plan are two independent activities which have to be done simultaneously. The dispatcher of the remote controlled lines has not just to optimize the railway traffic, he has to care for the properly train route setting as well. The new system of automatic train route setting should help him by doing much work on above mentioned activities for him. System that fulfils these requirements is automatic train route setting system. System or train dispatcher just decides how to handle the conflict situation and the function of automatic train route setting will execute the command at the proper time. This trend can be also seen in other countries. Very helpful for dispatchers who control the railway traffic is the graphic timetable. There is a common used application called GTN on Czech railways which is supplied together with the electronic interlocking from the AZD Praha. This application shows the actual and expected graphic timetable in the most appropriate form for dispatcher and moreover provides many other support functions. New designed function of the graphic train route editor enables precising the predicted timetable and consequently gaining the most probable prediction in the next moments. Given that GTN knows the actual timetable, dispose of data of trains and knows the exact train location in real time, the GTN is nowadays a powerful tool for decision support for traffic control staff. Therefore, GTN is an essential part of the system of automatic train route setting which is now being developed. Using the existing electronic interlocking, their remote control and the GTN application seems to be the easiest way how to implement automatic train route setting system on the infrastructure of the Czech railways. Keywords: interlocking system; traffic control; information system; control system Available in digital repository of UPCE.
Automatic train route setting in Czech Republic

The operation of railway traffic from a single dispatching control centre ensures high quality of traffic management. Even better traffic control could be achieved through the automation of the ...

Polach, Vlastimil; Růžička, Martin
Univerzita Pardubice, 2010

Distribution of municiplaities´ tax incomes/revenues modelling by means of genetic programming
Provazníková, Romana; Petr, Pavel
2010 - English
The Goal of this contribution is to demonstrate an illustrative example of genetic programming application in the area of regional administrations financing. The principle of genetic programming is used for the establishing of the analytical function for the calculation of the share each individual municipality has in the national shared taxes revenues in the Czech Republic. This approach is confronted with the existing municipal financing principle issuing from the effective act on Tax Assignment to sub-national Government Level. Keywords: Tax Assignment to sub-national Government Level; shared taxes; district/local administration; genetic programming Available in digital repository of UPCE.
Distribution of municiplaities´ tax incomes/revenues modelling by means of genetic programming

The Goal of this contribution is to demonstrate an illustrative example of genetic programming application in the area of regional administrations financing. The principle of genetic programming is ...

Provazníková, Romana; Petr, Pavel
Univerzita Pardubice, 2010

Regional railway transport funding in conditions of the Czech Republic and in the Pilsen region
Benediktová, Marcela; Chlaň, Alexander
2010 - English
Present situation in financing of regional railway transport does not allow sustainable development of transport services in a region and also often leads to further worsening of situation in rolling stock financing. This paper describes basic problems related to financing of regional transport services from regional budgets. Stability of regional railway transport financing in the future provides the resolution of government of the Czech Republic No. 1132/2009 from the 31st August 2009, for the renewal of rolling stock will be possible to get grants from the Regional operational program (ROP). Regional authorities have to decide how to prepare the long-term contract concerning the public service obligation. The question is how to choose the operator of regional trains and how to get the highest quality of provided services from amount incurred. Keywords: public service obligation; transport services; obligation of operation; obligation of removal; obligation of rate; demonstrable loss; selection procedure; Regional railway transport financing; ROP; the renewal of rolling stock Available in digital repository of UPCE.
Regional railway transport funding in conditions of the Czech Republic and in the Pilsen region

Present situation in financing of regional railway transport does not allow sustainable development of transport services in a region and also often leads to further worsening of situation in rolling ...

Benediktová, Marcela; Chlaň, Alexander
Univerzita Pardubice, 2010

Organizational level of public transport controlling in the public transport system
Břečka, Patrik; Kopecký, František; Kohl, Jiří
2010 - English
Controlling of public transport is a newly developed term just in connection with the IDS development. It is and it will be a direct support of the functioning transport system in the region, namely the support of interconnections of individual lines and services of individual transport operators. Transport technologists who have introduced this term, however, use it to cover all what is connected with the development of public transport in regions. This means a plan of the lines, awarding of contracts to transport operators, creation, monitoring of JŘ adherence, payments in the public transport, monitoring of provable losses, etc., but also the planning and the development of transport routes, transport terminals and interchange junctions. This very general term is not suitable from the viewpoint of creation of information and telematic support. This has already been highlighted by the solvers of the project entitled "Plans of ITS development in the link to the performance of state administration and local government", and therefore they have proposed a necessity of division of this term from the viewpoint of the existing, but especially the future organisation levels in the field of planning, actual organisation and control of public transport in regions. This is given by the presupposed model of activities of a coordinator of public transport. Keywords: obligation of public services; economical authorized common hauler costs; controlling of mass public transport; public transport; economy of public transport; public transport managing; public transport planning Available in digital repository of UPCE.
Organizational level of public transport controlling in the public transport system

Controlling of public transport is a newly developed term just in connection with the IDS development. It is and it will be a direct support of the functioning transport system in the region, namely ...

Břečka, Patrik; Kopecký, František; Kohl, Jiří
Univerzita Pardubice, 2010

About project

NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web

Send your suggestions and comments to nusl@techlib.cz

Provider

http://www.techlib.cz

Facebook

Other bases