No (11892)
Number of found documents:
11892
Published from
to
Reaction Mechanisms of Psychoactive Compounds
Sokolová, Romana; Beneš, Marek; Jiroušková, Eliška; Degano, I.
2024 - English
The reaction mechanism of selected new psychoactive substances (NPS) 4-methylpentedrone and 2-(((4-ethyl-2,5-dimethoxyphenethyl)amino)methyl)phenol was investigated based on their\nelectrochemical and spectroelectrochemical properties. Both drugs were examined by means of cyclic voltammetry using diagnostic parameters for particular reaction schemes, UV/Vis, and IR\nspectroelectrochemistry. Since water participates in the redox mechanism of both studied compounds, the reaction mechanism was studied under a controlled amount of water in an\nacetonitrile environment.
Keywords:
oxidation; reduction; IR spectrochemistry
Available on request at various institutes of the ASCR
Reaction Mechanisms of Psychoactive Compounds
The reaction mechanism of selected new psychoactive substances (NPS) 4-methylpentedrone and 2-(((4-ethyl-2,5-dimethoxyphenethyl)amino)methyl)phenol was investigated based on their\nelectrochemical and ...
Spectroelectrochemical Devices for Monitoring of Intermediates and Products on Carbonbased Composite Electrodes
Vaněčková, Eva; Šikula, M.; Hrdlička, Vojtěch; Sebechlebská, Táňa; Kolivoška, Viliam
2024 - English
Spectroelectrochemistry (SEC), as an interdisciplinary field, provides us with more comprehensive information about electroactive molecules involved in charge transfer reactions. Commercially\navailable SEC cells most often have an incorporated platinum working electrode, which can limit the range of the usable potential window and, in addition, can complicate the analysis due to the\nabsorption phenomenon. In this work, we designed and manufactured two types of custom-made SEC cells employing optically transparent carbon-based working electrodes for UV-Vis monitoring of reactants and electrogenerated intermediates and products. The first SEC cell is entirely manufactured by 3D printing using fused deposition modeling (FDM) by combining optically transparent (PET) and electrically conductive (PLA-CB) filaments. The second SEC cell employs pencil graphite (PG) rods as the working electrode (PGE) and its body is manually assembled from quartz slides. The functionality of the FDM 3D printed SEC cell and manually assembled quartz SEC cell were verified by cyclic voltammetry with in situ UV-Vis spectroscopic absorption monitoring of ruthenium(III) acetylacetonate (Ru(ac)3) redox-active probe dissolved in an aqueous or non-aqueous deaerated solvent, respectively. Both presented cells enable complete redox reversible conversion and strictly oxygen-free conditions.
Keywords:
pencil graphite electrode; spectroelectrochemistry; 3D printed electrode
Available on request at various institutes of the ASCR
Spectroelectrochemical Devices for Monitoring of Intermediates and Products on Carbonbased Composite Electrodes
Spectroelectrochemistry (SEC), as an interdisciplinary field, provides us with more comprehensive information about electroactive molecules involved in charge transfer reactions. ...
Basic characteristics of sulfide catalysts for the direct decomposition of H2S
Bonnet, Florian; Kaluža, Luděk
2024 - English
Sulfide catalysts are crucial in the hydrodesulfurization (HDS) of petroleum fractions, facilitating the hydrogenolysis of carbon-sulfur bonds. This process generates significant volumes of hydrogen sulfide (H2S), which is typically processed in the Claus unit. However, excess H2S can overwhelm the Claus process, creating both operational and environmental challenges. Researchers are now exploring sulfide catalysts for the direct thermo-catalytic decomposition of H2S to address this issue. Supported catalysts, like Mo/Al2O3, and commercial catalysts, considered typical monolayer-type well-dispersed catalysts, show the highest O2 uptake, ranging from 41.29 μmol/g for MoS2/Al2O3 (KLO) to 58.70 μmol/g for the commercial 715. Unsupported multilayer catalysts, such as Ni/MoWS2 (KKP), exhibit lower O2 uptake at 2.54 μmol/g, though it demonstrates high HDS activity with thiophene. Moreover, O2 uptake effectively describes the sintering of the Mo monolayer phase during the thermocatalytic reaction of H2S at 800°C. These O2 uptakes clearly correlate with the XRD patterns, where the MoS2 phase is X-ray amorphous with an O2 uptake of about 19.04 μmol/g, while the MoS2 phase in the spent catalyst shows certain crystallinity exhibiting an average particle size by Scherrer equation of about 6 nm and the O2 uptake of 1.63 μmol/g. O2 chemisorption thus serves as a valuable measure of the dispersion of Mo sulfides. The results obtain with the study of CoMo/Al2O3 (KJJ-family catalysts), highlight the correlation between the increasing amount of adsorbed O2 with the increasing nominal loading of MoO3 and the increasing rate constant of thiophene kTH. This research reveals the potential of these catalysts in hydrocarbon refining. The findings underline the connection between catalytic chemistry, process engineering, and environmental sustainability, with the objective to enhance industrial refining processes.
Keywords:
sulfide catalyst; O2 chemisorption; H2S decomposition
Available at various institutes of the ASCR
Basic characteristics of sulfide catalysts for the direct decomposition of H2S
Sulfide catalysts are crucial in the hydrodesulfurization (HDS) of petroleum fractions, facilitating the hydrogenolysis of carbon-sulfur bonds. This process generates significant volumes of hydrogen ...
PROPERTIES OF NANOCRYSTALLINE FE-NI PARTICLES PREPARED BY THERMAL REDUCTION OF OXALATE PRECURSORS
Švábenská, Eva; Roupcová, Pavla; Havlíček, Lubomír; Schneeweiss, Oldřich
2024 - English
Recent technological advancements require development of cost-effective and high-performance magnets \nwhich ideally do not contain rare earth metals or noble metals. The promising candidates are Fe-Ni-based \nalloys, in particular, the Fe50Ni50 L10 phase (tetrataenite), which has a great perspective for producing hard \nmagnetic materials. Our study explores a promising method for preparing nanoparticles of Fe-Ni alloy from an \niron-nickel oxalate precursor. The coprecipitation method was employed to prepare oxalate precursors, \nfollowed by controlled thermal decomposition in a reducing hydrogen atmosphere. The morphology and \nproperties of the resulting particles were analysed using scanning electron microscopy (SEM) coupled with \nenergy dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), Mössbauer spectroscopy (MS), and \nmagnetic measurements.\nThe SEM analysis revealed that the particles have approximately cube-shaped unit cell morphology with a\nsize in a range of 1 - 2 μm. Upon annealing, the samples contain multiple phases with varying Fe-Ni content.\nMagnetic measurements confirmed the formation of magnetically suitable Fe-Ni phases in the samples after \nannealing. Mössbauer spectroscopy emerged as a highly effective method for characterizing individual phases \nof the Fe-Ni system.
Keywords:
Magnetic materials; thermal decomposition; Mössbauer spectroscopy
Available at various institutes of the ASCR
PROPERTIES OF NANOCRYSTALLINE FE-NI PARTICLES PREPARED BY THERMAL REDUCTION OF OXALATE PRECURSORS
Recent technological advancements require development of cost-effective and high-performance magnets \nwhich ideally do not contain rare earth metals or noble metals. The promising candidates are ...
EFFECT OF OXIDE DISPERSION ON ELECTRIC CONDUCTIVITY OF ROTARY SWAGED POWDER-BASED COPPER COMPOSITES
Kunčická, Lenka; Benč, Marek; Kačor, P.; Marek, M.
2024 - English
Copper is a very popular electro-conductive material, however, the mechanical properties of pure Cu are low. They can be typically improved by (micro)alloying, or via structure modifications introduced by optimized deformation and thermomechanical treatments. Designing a Cu-based composite, possibly strengthened by a dispersion of fine oxides, is another way how to favourably improve the strength properties of Cu. In this study, we performed mechanical alloying of a Cu powder with a powder of Al2O3 oxide, which is known to have strengthening effects on metallic materials. After mixing, we sealed the powder mixture into evacuated tubular Cu containers (i.e. cans). As for the consolidation procedure, we applied direct consolidation of the canned powders via the intensive plastic deformation method of rotary swaging, performed under warm conditions. Subsequently, we subjected the swaged conductors to measurements of electric conductivity and detailed structure observations. The results revealed that the applied swaging ratio was sufficient to fully consolidate the canned powders as the final conductor was unrecognizable from a cast alloy from the viewpoints of visual and structure assessment. In other words, the structure did not exhibit any voids or remnants of unconsolidated powder particles. The observed fine grains with homogeneous dispersion of Al2O3 oxide particles provided improvement of the mechanical properties, as proven by microhardness measurements. Moreover, the electric properties remained favourable.
Keywords:
mechanical-properties; extrusion; Copper; oxide dispersion; electric conductivity; rotary swaging; microstructure
Available at various institutes of the ASCR
EFFECT OF OXIDE DISPERSION ON ELECTRIC CONDUCTIVITY OF ROTARY SWAGED POWDER-BASED COPPER COMPOSITES
Copper is a very popular electro-conductive material, however, the mechanical properties of pure Cu are low. They can be typically improved by (micro)alloying, or via structure modifications ...
Modification of cooling system for laboratory measurement of rotor blade vibration
Maturkanič, Dušan; Procházka, Pavel; Hodboď, Robert; Voronova, Evgeniya; Mekhalfia, Mohammed Lamine
2024 - English
Last year, the replacement of the turbine wheel model was completed in the Laboratory of Rotational Laser Vibrometry of the Institute of Thermomechanics AS CR, v.v.i. Based on previous experience and the expected higher operating load planned for the new wheel, the cooling system was modified at the same time. The paper describes the main effort in this direction and the results that clarify the previous damage of the measuring device.
Keywords:
blade; vibration; cooling system; measurement; laboratory
Available at various institutes of the ASCR
Modification of cooling system for laboratory measurement of rotor blade vibration
Last year, the replacement of the turbine wheel model was completed in the Laboratory of Rotational Laser Vibrometry of the Institute of Thermomechanics AS CR, v.v.i. Based on previous experience and ...
DYNAMICS OF MACHINES AND MECHANICAL SYSTEMS WITH INTERACTIONS : PROCEEDINGS DYMAMESI 2024
Zolotarev, Igor; Pešek, Luděk; Kozień, M. S.
2024 - English
The aim of the DYMAMESI is to facilitate the exchange of up to date information and knowledge among specialists in structural and multibody dynamics, in coupled interacting systems as aero-elasticity, hydro-elasticity, biomechanics, systems with feedbacks and mechatronics. In 2023 will be hosted by Cracow University of Technology, Institute of Applied Mechanics, Section of Dynamics of Systems.
Keywords:
dynamics; vibrations of mechanical systems; vibrodiagnostics; energy transformations
Available at various institutes of the ASCR
DYNAMICS OF MACHINES AND MECHANICAL SYSTEMS WITH INTERACTIONS : PROCEEDINGS DYMAMESI 2024
The aim of the DYMAMESI is to facilitate the exchange of up to date information and knowledge among specialists in structural and multibody dynamics, in coupled interacting systems as aero-elasticity, ...
Electrochemistry of Acetaminophen
Mikysek, T.; Ludvík, Jiří
2024 - English
The contribution is focused on electrochemical oxidation of acetaminophen mainly in non-aqueous media. The influence of various organic solvents as well as the pH effect is described herein. The redox properties of acetaminophen were studied by means of cyclic voltammetry, and rotating-disk voltammetry. We found that the protonation/deprotonation of acetaminophen acts as a ratedetermining step, where the stability of phenoxy radical intermediate plays an important role.
Keywords:
acetaminophen; phenacetine; voltammetry
Available on request at various institutes of the ASCR
Electrochemistry of Acetaminophen
The contribution is focused on electrochemical oxidation of acetaminophen mainly in non-aqueous media. The influence of various organic solvents as well as the pH effect is described herein. The redox ...
A New Approach to Determining the Drug Guaifenesin Using Voltammetric and Flow Injection Analysis
Kelíšková, P.; Matvieiev, O.; Sokolová, Romana; Janíková, L.; Behúl, M.; Šelešovská, R.
2024 - English
This study presents a new method for detecting guaifenesin (GFE) in pharmaceutical samples. We employed screen-printed sensors with a boron-doped diamond electrode (BDDE) to develop and validate both voltammetric and flow amperometric methods. These approaches were effectively used to analyze model solutions, pharmaceutical preparations, and serum samples spiked with GFE, producing accurate results comparable to those obtained with HPLC/DAD analysis. The developed methods provide straightforward, sensitive, and selective means for determining GFE in various sample matrices, underscoring the potential of SP/BDDE in electrochemical analysis.
Keywords:
guaifenesin; screen-printed sensor; boron-doped diamond electrode
Available on request at various institutes of the ASCR
A New Approach to Determining the Drug Guaifenesin Using Voltammetric and Flow Injection Analysis
This study presents a new method for detecting guaifenesin (GFE) in pharmaceutical samples. We employed screen-printed sensors with a boron-doped diamond electrode (BDDE) to develop and validate both ...
Optimization of Parameters Used in the Application of Elimination Voltammetry with Linear Scan
Navrátil, Tomáš; Trnková, L.; Hrdlička, Vojtěch; Li, X.
2024 - English
Elimination Voltammetry with Linear Scan (EVLS) is a well-established mathematical method that aids in understanding an analyzed electrochemical system. In almost 30 years since its derivation, it has become a “black-box” technique that is applied automatically (in most cases due to its incorporation into a voltammetric software) without thinking about its fundamentals. However, the choice of optimum parameters under which DC voltammetric data (from which elimination curves are calculated) is crucial. This contribution deals with revealing the optimum ratio of applied scan rates and their absolute values (i.e., times of recording) in dependence on the character of the investigated system (diffusion-controlled process, adsorption-controlled process, etc.).
Keywords:
elimination voltammetry with linear scan; optimization; adsorption
Available on request at various institutes of the ASCR
Optimization of Parameters Used in the Application of Elimination Voltammetry with Linear Scan
Elimination Voltammetry with Linear Scan (EVLS) is a well-established mathematical method that aids in understanding an analyzed electrochemical system. In almost 30 years since its derivation, it has ...
NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web
Send your suggestions and comments to nusl@techlib.cz
Provider
Other bases