SIEMENS ‘FLYEYE‘ prototype lens results within a project 3SU1
Doleček, Roman; Melich, Radek; Macner, David
2014 - English
The aim of this study is to design and prototype a lens that enable a decrease of the light intensity that radiate into forward direction (90°) and at the same time increase the FWHM of the irradiated pattern.
Keywords:
Flyeye lens; illumination
Available at various institutes of the ASCR
SIEMENS ‘FLYEYE‘ prototype lens results within a project 3SU1
The aim of this study is to design and prototype a lens that enable a decrease of the light intensity that radiate into forward direction (90°) and at the same time increase the FWHM of the irradiated ...
Witness sample of M1 protrusion
Melich, Radek; Psota, Pavel; Rail, Zdeněk; Franců, Helena; Hadincová, Ivana
2014 - English
Development of the technological process of M1 protrusion witness samples with a characteristic surface strength > 70MPa and realization of technology demonstrators.
Keywords:
M1 protrusion; characteristic strength; METIS
Available at various institutes of the ASCR
Witness sample of M1 protrusion
Development of the technological process of M1 protrusion witness samples with a characteristic surface strength > 70MPa and realization of technology demonstrators.
Microroughness of the superpolished coated sample
Melich, Radek; Kovačičinová, Jana; Lédl, Vít; Matoušek, Ondřej; Pintr, Pavel; Pleštil, Jan; Polák, Jaroslav; Possolt, Martin; Procháska, František; Psota, Pavel; Rail, Zdeněk; Tomka, David; Vít, Tomáš
2014 - English
This document describes a test of microroughness change after coating of the representative sample of the METIS mirror surface with respect to microroughness.
Keywords:
microroughness; coating; METIS
Available at various institutes of the ASCR
Microroughness of the superpolished coated sample
This document describes a test of microroughness change after coating of the representative sample of the METIS mirror surface with respect to microroughness.
Analysis and synthesis of optical performance of given material
Kovačičinová, Jana; Pintr, Pavel
2014 - English
Development of measurement process of optical performance of given material
Keywords:
measurement; optical performance
Available at various institutes of the ASCR
Analysis and synthesis of optical performance of given material
Development of measurement process of optical performance of given material
METIS – Design report - mirrors
Lédl, Vít; Melich, Radek; Psota, Pavel; Steiger, Lukáš; Vít, Tomáš; Kovačičinová, Jana
2013 - English
The presented study shows results from the mechanical design of M1 and M2 mirrors for METIS/ICOR. The study compares the material properties of different materials, which are often used for manufacturing of
Keywords:
METIS; lightweighted mirrors; low microroughness
Available at various institutes of the ASCR
METIS – Design report - mirrors
The presented study shows results from the mechanical design of M1 and M2 mirrors for METIS/ICOR. The study compares the material properties of different materials, which are often used for ...
Illumination study of 3SU1 project
Melich, Radek; Vojtíšek, Petr; Mach, M.
2013 - English
This document provides report of results obtained during measurement of Siemens 3SU1 PLCompact, 3SU1 PLModular nad PCB indicators and their comparison to 3SB3 and Allan Bradley pilot lights.
Keywords:
angular radiation measurement
Available at various institutes of the ASCR
Illumination study of 3SU1 project
This document provides report of results obtained during measurement of Siemens 3SU1 PLCompact, 3SU1 PLModular nad PCB indicators and their comparison to 3SB3 and Allan Bradley pilot lights.
Contribution to ASPIICS Coronagraph on PROBA3
Melich, Radek; Psota, Pavel; Steiger, Lukáš; Vít, Tomáš; Kovačičinová, Jana
2013 - English
The aim of the document is to present design and technical notes on evaluation, manufacturing, and measurement of individual components and assembly methods of the Optical Objectives Assembly (OOA) of ASPIICS coronagraph for PROBA3.
Keywords:
ASPIICS; optical design; PROBA3
Available at various institutes of the ASCR
Contribution to ASPIICS Coronagraph on PROBA3
The aim of the document is to present design and technical notes on evaluation, manufacturing, and measurement of individual components and assembly methods of the Optical Objectives Assembly (OOA) of ...
Toptec Welding Process Visualization Instrument
Vojtíšek, Petr
2013 - English
MAG welding is characterized by very rapid processes in extreme condition of electric arc. To describe welding is necessary to use sufficiently quick equipment. Especially in the transition region between dip and spray transfer the processes develop quickly. Characterization of transition area in active three component shielding gas was carried out visually by hi speed camera equipment and electrically by quick response electronic measurement system
Keywords:
Welding visualiation
Available at various institutes of the ASCR
Toptec Welding Process Visualization Instrument
MAG welding is characterized by very rapid processes in extreme condition of electric arc. To describe welding is necessary to use sufficiently quick equipment. Especially in the transition region ...
Design, manufacture and test of M1 and M2 mirror production
Lédl, Vít; Melich, Radek; Pintr, Pavel; Polák, Jaroslav; Procháska, František; Psota, Pavel; Rail, Zdeněk; Steiger, Lukáš; Tomka, David; Václavík, Jan; Vápenka, David; Vít, Tomáš; Bartoníček, Jiří
2013 - English
Design and tests for realization of M1 and M2 mirrors for METIS project.
Keywords:
METIS; lightweingted mirrors; low microroughness
Available at various institutes of the ASCR
Design, manufacture and test of M1 and M2 mirror production
Design and tests for realization of M1 and M2 mirrors for METIS project.
Preliminary design of imaging system without zoom
Melich, Radek; Lédl, Vít
2012 - English
The aim of the report is to provide the preliminary design and simulations of an imaging system without zoom in accordance to the provided mechanical dimensions. The simulations will result in spot diagrams for various field objects. Finally, the optical transmission efficiency for optical design will be provided. All designed systems will be discussed with respect to their simulated performances and recommendation for final selected system will be provided.
Keywords:
imaging system; electron beam microscopy
Available at various institutes of the ASCR
Preliminary design of imaging system without zoom
The aim of the report is to provide the preliminary design and simulations of an imaging system without zoom in accordance to the provided mechanical dimensions. The simulations will result in spot ...
NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web
Send your suggestions and comments to nusl@techlib.cz
Provider
Other bases