No (522)
Yes (41)
Used filters
(3)
Number of found documents:
563
Published from
to
Fast continuous in-situ XCT of additively manufactured carbon fiber reinforced tensile test specimens
Glinz, J.; Maurer, J.; Holzleitner, M.; Pace, F.; Stamopoulos, A.; Vopálenský, Michal; Kumpová, Ivana; Eckl, M.; Kastner, J.; Senck, S.
2023 - English
The reinforcement of fused filament fabricated (FFF) components with continuous fibers allows for high versatility in the design of mechanical properties for a specific application’s needs. However, the bonding quality between continuous fibers and the FFF matrix material has high impact on the overall performance of the composite. In a recent study [1], additively manufactured (AM) continuous fiber reinforced tensile test specimens have been investigated regarding the effect of amount and material of the embedded continuous fibers on tensile strength and AM build quality. During these tensile tests, a sudden reduction in tensile stress, which most likely was not related to actual rupture of continuous fibers, was noticeable. Since X-ray computed tomography (XCT) scans were performed only prior to and after the tensile testing, a detailed investigation on the origin of these drops in tensile stress was not possible. Within this work, we will expand upon these findings and present results of fast on-the-fly in-situ investigations performed on continuous carbon fiber reinforced specimens of the same AM build. During these investigations, specimens are loaded under the same conditions while fast XCT scans, with a total scan time of 12 seconds each, were performed consecutively. The resulting three-dimensional image data reveals internal meso- and macro-structural changes over time/strain to find the cause of the aforementioned reduction in tensile stress.
Keywords:
additive manufacturing; composites; X-ray computed tomography; in-situ tensile testing
Available at various institutes of the ASCR
Fast continuous in-situ XCT of additively manufactured carbon fiber reinforced tensile test specimens
The reinforcement of fused filament fabricated (FFF) components with continuous fibers allows for high versatility in the design of mechanical properties for a specific application’s needs. However, ...
Analyzing stochastic stability of a gyroscope through the stochastic Lyapunov function
Náprstek, Jiří; Fischer, Cyril
2023 - English
The text delves into the application of first integrals in the construction of Lyapunov functions for analyzing the stability of dynamic systems in stochastic domains. It emphasizes the distinct characteristics of first integrals that warrant the introduction of additional constraints to ensure the essential properties required for a Lyapunov function. These constraints possess physical interpretations associated with system stability. The general approach to testing stochastic stability is illustrated using the example of a 3-degrees-of-freedom system representing a gyroscope.
Keywords:
stochastic stability; Lyapunov function; first integral; gyroscope
Available at various institutes of the ASCR
Analyzing stochastic stability of a gyroscope through the stochastic Lyapunov function
The text delves into the application of first integrals in the construction of Lyapunov functions for analyzing the stability of dynamic systems in stochastic domains. It emphasizes the distinct ...
Innovative device for the simulation of environmental conditions and testing of building materials
Cacciotti, Riccardo; Wolf, Benjamin; Macháček, Michael; Frankl, Jiří
2022 - English
Excessive humidity influences the performance of building envelopes and the safety of their occupants. Moisture related problems can indeed impose significant health risks for buildings’ users and even lead, under extreme scenarios, to structural failures. This paper investigates an innovative experimental setup for evaluating the influence of changing environmental conditions on the performance of building materials. It stems out from a broader ongoing research aimed at studying the trends of mould growth on wooden building components. The presented results include the design, construction and numerical validation of a small-scale climatic wind tunnel (2m x 1.8m ca.) to be used for the simulation of natural ventilation and daily humidity and temperature fluctuations. Key findings include the final design of a low cost, modular construction which allows gathering reliable data on the response of building materials exposed to changing boundary conditions, intended for improving current mould growth models. Future work is also suggested.
Keywords:
building envelope; moisture; building material; wind tunnel; performance
Available in digital repository of the ASCR
Innovative device for the simulation of environmental conditions and testing of building materials
Excessive humidity influences the performance of building envelopes and the safety of their occupants. Moisture related problems can indeed impose significant health risks for buildings’ users and ...
Application of first integrals in the construction of the Lyapunov function for the random response stability testing
Náprstek, Jiří; Fischer, Cyril
2022 - English
The paper deals with a possibility of using the properties of first integrals for the construction of Lyapunov function for the analysis of a dynamic system stability in the stochastic domain. It points out certain characteristics of first integrals resulting in the necessity to introduce additional constraints to assure the principal properties of the Lyapunov function. A number of these constraints has their physical interpretation with reference to system stability. The advantage of this method constructing the Lyapunov function consists in the fact that the Lyapunov function itself contains information on the examined system and, consequently, it is not merely a positive definite function without any relation to the actual case concerned. The presented theory finds application in many dynamical systems. The procedure is illustrated by a nonlinear SDOF example.
Keywords:
stochastic stability; Lyapunov function; first integrals; cyclic coordinates
Available in digital repository of the ASCR
Application of first integrals in the construction of the Lyapunov function for the random response stability testing
The paper deals with a possibility of using the properties of first integrals for the construction of Lyapunov function for the analysis of a dynamic system stability in the stochastic domain. It ...
Determination of aerodynamic coefficients for air flow around U-profiles with different flange porosities
Ledvinková, Blanka; Hračov, Stanislav; Macháček, Michael
2022 - English
Our contribution presents the comparison of the experimental investigations and of the numerical 2D simulations of the air flow around U –profiles having different flange porosities. The U-shaped beams were exposed to the air flow having a given velocity at different angles of the wind attack for obtaining the curves of the aerodynamic coefficients depending on the impact angle. The numerical simulations of the wind tunnel testing were performed using the Unsteady Reynolds Averaged Navier-Stokes (RANS) method, k-ω SST turbulence model was assumed.
Keywords:
U-shaped beams; porosity; wind tunnel; RANS simulation; k-ω SST model
Available in digital repository of the ASCR
Determination of aerodynamic coefficients for air flow around U-profiles with different flange porosities
Our contribution presents the comparison of the experimental investigations and of the numerical 2D simulations of the air flow around U –profiles having different flange porosities. The U-shaped ...
Theoretical analysis of selected trajectories inscribed by a ball freely rolling in a spherical cavity
Náprstek, Jiří; Fischer, Cyril
2022 - English
Indirect monitoring of structures is significantly complicated when an artificial vibration absorber has to be taken into account. Knowledge of the absorber’s behaviour is necessary in order to correctly distinguish the response types obtained during an drive-by measurement. In this work, the mathematical model of the ball-type vibration absorber is used, which is based on the Lagrangian formalism. Three first integrals are identified when no external excitation nor damping is assumed. The paper illustrates the power of this approach, which enables a detailed analysis of free movement of the ball in the spherical cavity. Properties of several particular trajectories depending on initial conditions are presented.
Keywords:
slender structure; vibration absorber; first integral; rolling sphere; structural health monitoring
Available in digital repository of the ASCR
Theoretical analysis of selected trajectories inscribed by a ball freely rolling in a spherical cavity
Indirect monitoring of structures is significantly complicated when an artificial vibration absorber has to be taken into account. Knowledge of the absorber’s behaviour is necessary in order to ...
Long term optical monitoring technique of displacement fields based on ArUco markers
Kunecký, Jiří
2022 - English
In structural engineering it is often needed to measure tiny displacements of parts of the structure extremely precisely. For such a purpose it is often needed to use some type of sensor attached to the surface of the structure. This paper presents a new technique which simply uses computer vision libraries to measure displacement of markers originally developed for robotics. Such analysis can be under specific circumstances (2D planar movement) valid if we compare two images taken at different times with the same camera. Main advantage of this method is simplicity of use and low cost of markers, which can be printed in a standard office laser printer. The resolution (error) can be for standard cameras around 0.1 pixel. The method is especially developed for research of timber frames/joints behavior in real structures, because displacements of joints in creep or under load can reach an amplitude which is perfectly detectable by this method.
Keywords:
displacement measurement; long-term monitoring; ArUco markers
Available at various institutes of the ASCR
Long term optical monitoring technique of displacement fields based on ArUco markers
In structural engineering it is often needed to measure tiny displacements of parts of the structure extremely precisely. For such a purpose it is often needed to use some type of sensor attached to ...
Analysis of van der Pol equation on slow time scale for combined random and harmonic excitation
Náprstek, Jiří; Fischer, Cyril
2022 - English
Vortex shedding represents one of the most important processes that constantly attract the attention of experimental and theoretical research. A number of non-linear effects arise from the fluid-structure interaction. The non-stationary response in the vicinity of the lock-in region has a quasi-periodic character, beating frequency of which varies considerably with the distance from the lock-in frequency. This property is significantly affected by the assumption of combined random and harmonic excitation. This paper describes several details that contribute to the probabilistic characteristics of the system on a time-slow scale using partial response amplitudes.
Keywords:
SDOF oscillator; slow-time system; Fokker-Planck equation
Available at various institutes of the ASCR
Analysis of van der Pol equation on slow time scale for combined random and harmonic excitation
Vortex shedding represents one of the most important processes that constantly attract the attention of experimental and theoretical research. A number of non-linear effects arise from the ...
Construction of the Lyapunov function reflecting the physical properties of the model
Náprstek, Jiří; Fischer, Cyril
2022 - English
Practical experience shows that the random excitation component can affect the system response and its dynamic stability not only negatively but also positively. Such mechanisms are usually developed heuristically and are often not sufficiently justified theoretically. The paper presents a possibility of using the properties of first integrals for the construction of a Lyapunov function for the analysis of a dynamic system stability in the stochastic domain. In such case, the Lyapunov function itself contains information on the examined system and, consequently, it is able to provide a more detailed insight into the system stability properties. The procedure is illustrated by a nonlinear SDOF example.
Keywords:
Lyapunov function; stability; spherical pendulum
Available at various institutes of the ASCR
Construction of the Lyapunov function reflecting the physical properties of the model
Practical experience shows that the random excitation component can affect the system response and its dynamic stability not only negatively but also positively. Such mechanisms are usually developed ...
Analytical model of joint loaded perpendicular to wooden grain
Hataj, M.; Pošta, J.; Hasníková, Hana; Kunecký, Jiří
2022 - English
Computing models for structural behaviour and determination of traditional timber butt joints using analytical relations are presented in this paper. A component method is the base of the computing technique introduced herein. This method is usually used for steel joint design. The component method is based on dividing a joint into individual components. These are defined by partial joint component stiffness. An analytical solution includes a subsidence effect of wooden material close to compressive loading. Analytical computation results are compared with the experimental outputs. A design procedure according to Eurocode 5 for a load capacity determination of perpendicularly loaded structural elements is stated in the paper.
Keywords:
analytical models; load capacity; butt joint; carpentry; timber structures
Available at various institutes of the ASCR
Analytical model of joint loaded perpendicular to wooden grain
Computing models for structural behaviour and determination of traditional timber butt joints using analytical relations are presented in this paper. A component method is the base of the computing ...
NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web
Send your suggestions and comments to nusl@techlib.cz
Provider
Other bases