Počet nalezených dokumentů: 12587
Publikováno od do

Application of In situ TR Spectroelectrochemical Techniques in Determination of Redox Mechanism of Bioactive Compounds
Sokolová, Romana; Jiroušková, Eliška; Degano, I.; Wantulok, J.; Nycz, J.
2023 - anglický
The electron transfer reactions play an important role in many natural processes. Reactions such as \ndissociation, protonation, and reactions with water and other small molecules often occur in \nbiotransformation. The reaction schemes involving these chemical reactions coupled to the \nelectron transfer can be determined by cyclic voltammetry. Additionally, in \nsitu spectroelectrochemistry can efficiently contribute to the determination of oxidation or \nreduction mechanism. This technique provides information about the electroactive chromophore during \nthe redox process allowing to identification the first reaction intermediates. The final reaction \nproducts were identified by chromatographic techniques. This study represents a key role of TR \nspectroelectrochemistry in the determination of reaction intermediates in the case of \n1,10- phenanthroline derivative substituted by bioactive phenothiazine unit and \ndrug 3- fluorophenmetrazine (2-(3-fluorophenyl)-3-methylmorpholine, 3-FPM). Co pound 3-FPM\nhave recently appeared as the new psychoactive substance in the drug market.\n Klíčová slova: IR spectroelectrochemistry; psychoactive substances; oxidation mechanism Plné texty jsou dostupné na vyžádání prostřednictvím repozitáře Akademie věd.
Application of In situ TR Spectroelectrochemical Techniques in Determination of Redox Mechanism of Bioactive Compounds

The electron transfer reactions play an important role in many natural processes. Reactions such as \ndissociation, protonation, and reactions with water and other small molecules often occur in ...

Sokolová, Romana; Jiroušková, Eliška; Degano, I.; Wantulok, J.; Nycz, J.
Ústav fyzikální chemie J. Heyrovského, 2023

A polarizable reference electrode
Mareček, Vladimír
2023 - anglický
New concept of a reference electrode for electrochemical systems resolves a problem of a poor \npotential stability of refence electrodes based on the distribution of a strongly \nhydrophobic common cation between two immiscible electrolyte solutions (TTTES). The use of a \npolarizable metal electrode instead of a classical reference electrode is demonstrated in \n a modified conventional four-electrode cell with TTTES. A simple battery operated potentiostat \ncontrols the working electrode potential in a three-electrode configuration. The working metal \nelectrode then serves as a polarizable reference organic solvent electrode in a four-electrode \nsystem for the polarization of the water/organic solvent interface.\n\n Klíčová slova: reference electrode; liquid/liquid interface; chloride extraction Plné texty jsou dostupné na vyžádání prostřednictvím repozitáře Akademie věd.
A polarizable reference electrode

New concept of a reference electrode for electrochemical systems resolves a problem of a poor \npotential stability of refence electrodes based on the distribution of a strongly ...

Mareček, Vladimír
Ústav fyzikální chemie J. Heyrovského, 2023

Determination of Selected Natural Psychoactive Substances in Organic Matrices at 3D Printed Electrodes
Choińska-Mlynarczyk, Marta; Šestáková, Ivana; Navrátil, Tomáš
2023 - anglický
Psilocybin and its derivative psilocin are popular psychoactive substances both as experimental\ntreatments in clinical trials and as illicit drugs. Their potential ability to influence the human\nbrain entails the need for a fast, inexpensive, selective, and sensitive method of their\ndetermination. The aim of our study was the development of new 3D-printed electrodes which\nfulfill these demands and are useful for medical, toxicological, and forensic purposes.\nSuccessful development allows determining in real matrices (human plasma and dried\nmushrooms) concentrations of the order of 1 μmol dm-3.\n Klíčová slova: natural psychoactive substances; 3D-printed electrodes; psilocin; psilocybin Plné texty jsou dostupné na vyžádání prostřednictvím repozitáře Akademie věd.
Determination of Selected Natural Psychoactive Substances in Organic Matrices at 3D Printed Electrodes

Psilocybin and its derivative psilocin are popular psychoactive substances both as experimental\ntreatments in clinical trials and as illicit drugs. Their potential ability to influence the ...

Choińska-Mlynarczyk, Marta; Šestáková, Ivana; Navrátil, Tomáš
Ústav fyzikální chemie J. Heyrovského, 2023

Ceramic protection of anti-corrosion layers of 3-glycidyloxypropyl-triethoxysilane on steel
Pokorný, P.; Prodanović, N.; Janata, Marek; Brožek, Vlastimil
2023 - anglický
There are various variations on the problem of steel reinforcement bond strength in concrete. Along with geometrical considerations, corrosion performance of steels with varying chemical compositions in interaction with variable chemical compositions of concrete are crucial. One approach is to cover steel surfaces with organosilane compounds, which increases the reinforcement resistance to corrosion in both acidic and alkaline conditions but, on the other hand, may weaken the reinforcement bond strength on concrete. The issue is resolved by intentionally forming a thin-walled, highly adhering corundum layer that is highly porous and impregnated with 3-glycidyloxypropyltriethoxysilane. This procedure also includes testing the adhesion properties between the ceramic and the metal and the cement prior to conducting a corrosion test in a chloride environment. Klíčová slova: steel; concrete; ceramics Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Ceramic protection of anti-corrosion layers of 3-glycidyloxypropyl-triethoxysilane on steel

There are various variations on the problem of steel reinforcement bond strength in concrete. Along with geometrical considerations, corrosion performance of steels with varying chemical compositions ...

Pokorný, P.; Prodanović, N.; Janata, Marek; Brožek, Vlastimil
Ústav fyziky plazmatu, 2023

Infants' learning of novel segments is modulated by prosody
Chládková, Kateřina; Podlipský, V.J.; Nudga, Natalia; Paillereau, Nikola; Kynčlová, Kateřina; Šimáčková, Š.
2023 - anglický
Young infants recognize atypical realisations of native-language speech. Later they learn words better from native-accented talkers. However, 6-month-olds preferentially listen to unfamiliar speech. We tested whether the learning of new vowels matches 6-month-olds’ listening preferences, being more effective from nonnative-accented speech. We exposed Czech six-month-olds to delexicalised utterances with consonants replaced by [f] and vowels by 405 tokens sampled from a bimodal [ɛ]-[æ] distribution, a contrast absent from Czech, and with either native or atypical rhythm. Discrimination of [ɛ]-[æ] was then tested in an alternating/non-alternating paradigm. Longer first-look duration to non-alternating than to alternating trials – indicating a learning effect – was found in infants familiarised with the novel contrast in atypical rhythm, such effect was not\ndetected after familiarisation with native rhythm. Six-month-olds thus more effectively exploit distributional information about novel vowels from non-native rhythm, which matches their previously reported preferences for listening to novel over familiar accents. Klíčová slova: distributional learning; selective learning; non-native rhythm; vowels; infancy Plné texty jsou dostupné na vyžádání prostřednictvím repozitáře Akademie věd.
Infants' learning of novel segments is modulated by prosody

Young infants recognize atypical realisations of native-language speech. Later they learn words better from native-accented talkers. However, 6-month-olds preferentially listen to unfamiliar speech. ...

Chládková, Kateřina; Podlipský, V.J.; Nudga, Natalia; Paillereau, Nikola; Kynčlová, Kateřina; Šimáčková, Š.
Psychologický ústav, 2023

Room temperature ethanol detection using carbon materials
Kočí, Michal
2023 - anglický
Allotropic forms of carbon, in particular graphene oxide (GO) or nanocrystalline diamond (NCD), attracted the attention of many research groups due to their unique electronic structures and extraordinary physical and chemical properties, preferable for many different applications, including sensor devices. This work focuses on responses of various sensing layers (NCD with hydrogen termination (H-NCD), graphene oxide (GO), reduced graphene oxide (rGO), thiol-functionalized graphene oxide (GO-SH) and their hybrid structures to ethanol vapor with concentrations up to 100 ppm in synthetic air at room temperature. The measured parameters of the tested sensors, especially stability, reproducibility and regeneration, are compared and critically evaluated. The high sensitivity of tested sensors achieved at room temperature makes them very promising for monitoring ethanol vapor as well as other volatile substances (e.g., isopropyl-alcohol or acetone). Klíčová slova: gas sensor; nanocrystalline diamond (NCD); graphene oxide (GO); reduced graphene oxide (rGO); thiol-functionalized graphene oxide (GO-SH) Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Room temperature ethanol detection using carbon materials

Allotropic forms of carbon, in particular graphene oxide (GO) or nanocrystalline diamond (NCD), attracted the attention of many research groups due to their unique electronic structures and ...

Kočí, Michal
Fyzikální ústav, 2023

Adaptation of methods for cyclo-stationary processes for noisy structural health data
Fischer, Cyril; Bayer, Jan; Náprstek, Jiří; Urushadze, Shota
2023 - anglický
In structural health analysis, various techniques, including indirect measurement via monitoring vehicles, often yield data with significant randomness and insufficient frequency separation. Conversely, the desired attributes under scrutiny are periodic in nature. Thus, methodologies designed to identify cyclo-stationary properties within noisy data can be adapted for such scenarios, assuming an adequate length of the recorded data. Klíčová slova: data analysis; cyclo-stationary processes; structural health monitoring Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Adaptation of methods for cyclo-stationary processes for noisy structural health data

In structural health analysis, various techniques, including indirect measurement via monitoring vehicles, often yield data with significant randomness and insufficient frequency separation. ...

Fischer, Cyril; Bayer, Jan; Náprstek, Jiří; Urushadze, Shota
Ústav teoretické a aplikované mechaniky, 2023

Consistency of mathematical and experimental model of the autoparametric system
Fischer, Cyril; Náprstek, Jiří
2023 - anglický
This paper presents a long-overdue comparison of data obtained from experimental investigation of a spherical vibration absorber with the results of two mathematical models of the motion of a heavy sphere in a spherical surface. It shows that the danger posed by the potentially unstable self-parametric nature of the mathematical system is not too great in the case of realistic configurations, and that the values of the parameters describing the realistic structures remain within intervals corresponding to the stable behaviour of the absorber. Klíčová slova: vibration absorber; rolling sphere; spherical surface; autoparametric system; structural health monitoring Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Consistency of mathematical and experimental model of the autoparametric system

This paper presents a long-overdue comparison of data obtained from experimental investigation of a spherical vibration absorber with the results of two mathematical models of the motion of a heavy ...

Fischer, Cyril; Náprstek, Jiří
Ústav teoretické a aplikované mechaniky, 2023

Comparison of finite element simulation of tungsten nanoindentation with Berkovich and conical indenter
Fiala, L.; Ballo, I.; Kovář, J.; Fuis, Vladimír
2023 - anglický
Finite Element Method (FEM) was used to study the difference between using Berkovich and conical indenters in nanoindentation test of tungsten specimen. The study was aimed to determine the\nmodulus of elasticity of a tested specimen and how it changes with different indenter. The FEM analysis also revealed that the modulus of elasticity was sensitive to the dimensions of both specimen and the indenter for which were made several numerical calculations with different dimensions. Klíčová slova: nanoindentation; FEM; Berkovich indenter; conical indenter; tungsten Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Comparison of finite element simulation of tungsten nanoindentation with Berkovich and conical indenter

Finite Element Method (FEM) was used to study the difference between using Berkovich and conical indenters in nanoindentation test of tungsten specimen. The study was aimed to determine the\nmodulus ...

Fiala, L.; Ballo, I.; Kovář, J.; Fuis, Vladimír
Ústav termomechaniky, 2023

Mechanical properties of basalt: a study on compressive loading at different strain rates using SHPB
Falta, J.; Krčmářová, N.; Fíla, T.; Vavro, Martin; Vavro, Leona
2023 - anglický
This article focuses on the mechanical properties of basalt in compressive loading at different strain-rates. The study employs advanced instrumentation for the evaluation of the results in dynamic conditions, while standard uni-axial loading device is used for evaluation in quasi-static conditions. Basalt specimens were subjected to four different loading-rates from 200–600 s−1 on which the stress-strain dependence was evaluated together with DIC analysis of crack initiation and disintegration process. Understanding the mechanical properties of basalt can provide insights for engineers and designers in creating structures that are durable and able to withstand different loading conditions. The findings of this study can have implications for a wide range of industries, including aerospace, automotive, and construction, among others. Klíčová slova: SHPB; basalt; compressive loading; dynamic loading Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Mechanical properties of basalt: a study on compressive loading at different strain rates using SHPB

This article focuses on the mechanical properties of basalt in compressive loading at different strain-rates. The study employs advanced instrumentation for the evaluation of the results in dynamic ...

Falta, J.; Krčmářová, N.; Fíla, T.; Vavro, Martin; Vavro, Leona
Ústav geoniky, 2023

O službě

NUŠL poskytuje centrální přístup k informacím o šedé literatuře vznikající v ČR v oblastech vědy, výzkumu a vzdělávání. Více informací o šedé literatuře a NUŠL najdete na webu služby.

Vaše náměty a připomínky posílejte na email nusl@techlib.cz

Provozovatel

http://www.techlib.cz

Facebook

Zahraniční báze