Number of found documents: 9287
Published from to

Nanoparticels from brake pads wear
Švábenská, Eva; Roupcová, Pavla; Friák, Martin; Schneeweiss, Oldřich
2023 - English
Exposure to particulate air pollution has been associated with a variety of health problems. One of the main\nsources of metal-rich airborne particulate pollution in roadside environments are brake-wear emissions. The \nscanning electron microscopy (SEM) and transmission electron microscopy (TEM), Mössbauer spectroscopy \n(MS), X-ray powder diffraction (XRD) was used to a make quantitative evaluation of wear particles in two \nsamples. Sizes, morphologies, oxidation state, and trace element compositions of wear particles were\ninvestigated using combination of several methods revealed high concentrations of Fe species and phases, \noften associated with carbonaceous material. SEM and TEM observations show that brake wear particles with \na size of tens to hundreds of nm mainly form particle agglomerates. However, ultrafine (<100 nm) particles are \nlikely to pose a health threat after inhalation and/or ingestion. Keywords: Wear particles; analysis; TEM; iron oxides; metallic particles Available at various institutes of the ASCR
Nanoparticels from brake pads wear

Exposure to particulate air pollution has been associated with a variety of health problems. One of the main\nsources of metal-rich airborne particulate pollution in roadside environments are ...

Švábenská, Eva; Roupcová, Pavla; Friák, Martin; Schneeweiss, Oldřich
Ústav fyziky materiálů, 2023

Bohl-Marek decomposition applied to a class of biochemical networks with conservation properties
Papáček, Štěpán; Matonoha, Ctirad; Duintjer Tebbens, Jurjen
2023 - English
This study presents an application of one special technique, further called as Bohl-Marek decomposition, related to the mathematical modeling of biochemical networks with mass conservation properties. We continue in direction of papers devoted to inverse problems of parameter estimation for mathematical models describing the drug-induced enzyme production networks [3]. However, being aware of the complexity of general physiologically based pharmacokinetic (PBPK) models, here we focus on the case of enzyme-catalyzed reactions with a substrate transport chain [5]. Although our ultimate goal is to develop a reliable method for fitting the model parameters to given experimental data, here we study certain numerical issues within the framework of optimal experimental design [6]. Before starting an experiment on a real biochemical network, we formulate an optimization problem aiming to maximize the information content of the corresponding experiment. For the above-sketched optimization problem, the computational costs related to the two formulations of the same biochemical network, being (i) the classical formulation x˙(t) = Ax(t) + b(t) and (ii) the 'quasi-linear' Bohl-Marek formulation x˙M(t) = M(x(t)) xM(t), can be determined and compared. Keywords: Mathematical modeling; Biochemical network; Pharmacokinetic (PBPK) models Fulltext is available at external website.
Bohl-Marek decomposition applied to a class of biochemical networks with conservation properties

This study presents an application of one special technique, further called as Bohl-Marek decomposition, related to the mathematical modeling of biochemical networks with mass conservation properties. ...

Papáček, Štěpán; Matonoha, Ctirad; Duintjer Tebbens, Jurjen
Ústav teorie informace a automatizace, 2023

Validation of numerical simulations of a simple immersed boundary solver for fluid flow in branching channels
Keslerová, R.; Lancmanová, Anna; Bodnár, Tomáš
2023 - English
This work deals with the flow of incompressible viscous fluids in a two-dimensional branching channel. Using the immersed boundary method, a new finite difference solver was developed to interpret the channel geometry. The numerical results obtained by this new solver are compared with the numerical simulations of the older finite volume method code and with the results obtained with OpenFOAM. The aim of this work is to verify whether the immersed boundary method is suitable for fluid flow in channels with more complex geometries with difficult grid generation. Keywords: immersed boundary method; finite volume method; OpenFOAM Available in digital repository of the ASCR
Validation of numerical simulations of a simple immersed boundary solver for fluid flow in branching channels

This work deals with the flow of incompressible viscous fluids in a two-dimensional branching channel. Using the immersed boundary method, a new finite difference solver was developed to interpret the ...

Keslerová, R.; Lancmanová, Anna; Bodnár, Tomáš
Matematický ústav, 2023

Rooting algebraic vertices of convergent sequences
Hartman, David; Hons, T.; Nešetřil, J.
2023 - English
Structural convergence is a framework for convergence of graphs by Nešetřil and Ossona de Mendez that unifies the dense (left) graph convergence and Benjamini-Schramm convergence. They posed a problem asking whether for a given sequence of graphs (Gn) converging to a limit L and a vertex r of L it is possible to find a sequence of vertices (rn) such that L rooted at r is the limit of the graphs Gn rooted at rn. A counterexample was found by Christofides and Král’, but they showed that the statement holds for almost all vertices r of L. We offer another perspective to the original problem by considering the size of definable sets to which the root r belongs. We prove that if r is an algebraic vertex (i.e. belongs to a finite definable set), the sequence of roots (rn) always exists. Keywords: rooting; algebraic vertices; convergent sequences Available in digital repository of the ASCR
Rooting algebraic vertices of convergent sequences

Structural convergence is a framework for convergence of graphs by Nešetřil and Ossona de Mendez that unifies the dense (left) graph convergence and Benjamini-Schramm convergence. They posed a problem ...

Hartman, David; Hons, T.; Nešetřil, J.
Ústav informatiky, 2023

Drivers of Private Equity Activity across Europe: An East-West Comparison
Kočenda, Evžen; Shivendra, R.
2023 - English
We investigate the key macroeconomic and institutional determinants of fundraising and investment activities and compare them across Europe, covering 13 Central and Eastern European (CEE) and 16 Western European (WE) countries. Five macroeconomic variables and nineteen institutional variables are selected. These variables are studied using panel data analysis with fixed effects and random effects models over an eleven-year observation period (2010–2020). Bayesian Model Averaging (BMA) is applied to select the key variables. Our results suggest that macroeconomic variables have no significant impact on fundraising and investment activity in either region. Investment activity is a significant driver of fundraising across Europe. Similarly, fundraising and divestment activity are significant drivers of investments across Europe. Institutional variables, however, affect fundraising and investment activity differently. While investment freedom has a significant effect on funds raised in the WE and CEE countries, government integrity and trade freedom are both significant determinants of investments in both European regions. In addition, the results demonstrate that, in contrast to the WE region, fundraising in the CEE region is not country specific. We investigate the key macroeconomic and institutional determinants of fundraising and investment activities and compare them across Europe, covering 13 Central and Eastern European (CEE) and 16 Western European (WE) countries. Five macroeconomic variables and nineteen institutional variables are selected. These variables are studied using panel data analysis with fixed effects and random effects models over an eleven-year observation period (2010–2020). Bayesian Model Averaging (BMA) is applied to select the key variables. Our results suggest that macroeconomic variables have no significant impact on fundraising and investment activity in either region. Investment activity is a significant driver of fundraising across Europe. Similarly, fundraising and divestment activity are significant drivers of investments across Europe. Institutional variables, however, affect fundraising and investment activity differently. While investment freedom has a significant effect on funds raised in the WE and CEE countries, government integrity and trade freedom are both significant determinants of investments in both European regions. In addition, the results demonstrate that, in contrast to the WE region, fundraising in the CEE region is not country specific. Keywords: Private equity; Fundraising; Investment Fulltext is available at external website.
Drivers of Private Equity Activity across Europe: An East-West Comparison

We investigate the key macroeconomic and institutional determinants of fundraising and investment activities and compare them across Europe, covering 13 Central and Eastern European (CEE) and 16 ...

Kočenda, Evžen; Shivendra, R.
Ústav teorie informace a automatizace, 2023

Analysis suggestion for vehicle scanning method
Bayer, Jan
2023 - English
An analytical approach is suggested that can be conveniently applied in the framework of the Vehicle scanning method (VSM). It assumes that the modal parameters of a bridge will be imported from a finite element (FE) program into MATLAB, where the structural response caused by a moving mass and a moving spring mass is solved using coupling equations and numerical integration. A mathematical formulation of the solution is presented together with a short numerical case study that compares the results to a traditional closed form solution. It is shown that when comparing both forms of analysis the suggested approach is more accurate in the case of slow velocities of the passing sprung mass. Other advantages are that the method allows for the mass of the vehicle or (tractor) towing vehicle and a damping \nto be included in the calculation. The user-friendly preprocessing in commercial FE programs can also be considered an advantage. Keywords: moving vehicle; vehicle scanning method; natural frequency; finite element analysis Available at various institutes of the ASCR
Analysis suggestion for vehicle scanning method

An analytical approach is suggested that can be conveniently applied in the framework of the Vehicle scanning method (VSM). It assumes that the modal parameters of a bridge will be imported from a ...

Bayer, Jan
Ústav teoretické a aplikované mechaniky, 2023

A short study on self-balancing of vertical rotors mounted in passive contactless bearings
Zapoměl, Jaroslav; Kozánek, Jan
2023 - English
Energy losses and wear of the support elements of high-speed rotors can be reduced by mounting the rotors in stable passive contactless bearings, the operation of which is based on magnetic levitation. The goal of the conducted research was to investigate applicability of self­balancing device added to vertical rotors supported by bearings showing low stiffness and damping, which is a specific property of passive magnetic bearings. This paper deals with applicability and efficiency of self-balancing devices added to vertical rotors supported by bearings having very low stiffness and damping, which corresponds to the properties of magnetic frictionless bearings. Keywords: self-balancing of rotors; passive contactless bearings; the influence of external damping Available at various institutes of the ASCR
A short study on self-balancing of vertical rotors mounted in passive contactless bearings

Energy losses and wear of the support elements of high-speed rotors can be reduced by mounting the rotors in stable passive contactless bearings, the operation of which is based on magnetic ...

Zapoměl, Jaroslav; Kozánek, Jan
Ústav termomechaniky, 2023

Dynamic tensile experiments of hard rubber on instron test machine under finite deformations
Šulc, Petr; Pešek, Luděk; Bula, Vítězslav; Šnábl, Pavel
2023 - English
This paper deals with the first experimental tests of hard rubbers under tensile harmonic loading on the axial-torsional servohydraulic Instron 8852 test machine. The objective of these experiments on cylindrical rubber specimens on this machine is to obtain stress-strain curves of rubber specimens, first considering uniaxial finite longitudinal strains for a single load cycle. Next, the hysteresis loops and their skeleton curves are compared for two selected strain measures as a function of their conjugate stress. It is shown how to obtain the dependence between elongation in the axial direction and constriction in the radial direction, which is used to determine the Cauchy stress in this configuration. Keywords: uniaxial harmonic loading; finite deformation; second Piola-Kirchhoff stress; hysteresis loop; Green-Lagrange strain tensor Available at various institutes of the ASCR
Dynamic tensile experiments of hard rubber on instron test machine under finite deformations

This paper deals with the first experimental tests of hard rubbers under tensile harmonic loading on the axial-torsional servohydraulic Instron 8852 test machine. The objective of these experiments on ...

Šulc, Petr; Pešek, Luděk; Bula, Vítězslav; Šnábl, Pavel
Ústav termomechaniky, 2023

On the problem of singular limit
Caggio, Matteo; Ducomet, B.; Nečasová, Šárka; Tang, T.
2023 - English
We consider the problem of singular limit of the compressible Euler system confined to a straight layer Ωδ = (0, δ)×R², δ > 0. In the regime of low Mach number limit and reduction of dimension the convergence to the strong solution of the 2D incompressible Euler system is shown. Keywords: compressible Euler equations; dissipative measure-valued solutions; low Mach number; thin domain Available in digital repository of the ASCR
On the problem of singular limit

We consider the problem of singular limit of the compressible Euler system confined to a straight layer Ωδ = (0, δ)×R², δ > 0. In the regime of low Mach number limit and reduction of dimension the ...

Caggio, Matteo; Ducomet, B.; Nečasová, Šárka; Tang, T.
Matematický ústav, 2023

Deep learning methods for the acoustic emission methods to evaluate an onset of plastic straining
Parma, Slavomír; Kovanda, Martin; Chlada, Milan; Štefan, Jan; Kober, Jan; Feigenbaum, H. P.; Plešek, Jiří
2023 - English
Development of phenomenological plasticity models, hardening rules, and plasticity theories relies on experimental data of plastic straining. The experimental data are usually measured as the stress–strain response of the material being loaded and do not provide any clues or information about the local response of\nmaterial. In this paper, we analyze the plastic deformation of the material using the acoustic emission method and current state-of-the-art neural network models such as the InceptionTime architecture. Keywords: metal plasticity; strain hardening; acoustic emission; neural networks Fulltext is available at external website.
Deep learning methods for the acoustic emission methods to evaluate an onset of plastic straining

Development of phenomenological plasticity models, hardening rules, and plasticity theories relies on experimental data of plastic straining. The experimental data are usually measured as the ...

Parma, Slavomír; Kovanda, Martin; Chlada, Milan; Štefan, Jan; Kober, Jan; Feigenbaum, H. P.; Plešek, Jiří
Ústav termomechaniky, 2023

About project

NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web

Send your suggestions and comments to nusl@techlib.cz

Provider

http://www.techlib.cz

Facebook

Other bases