No (20995)
Yes (2685)
Number of found documents:
23680
Published from
to
Surfactant-free silver nanofluids as liquid systems with neuromorphic potential
Nikitin, D.; Biliak, K.; Lemke, J.; Protsak, M.; Pleskunov, P.; Tosca, M.; Ali-Ogly, S.; Červenková, V.; Adejube, B.; Bajtošová, L.; Černochová, Zulfiya; Prokeš, J.; Křivka, I.; Biederman, H.; Faupel, F.; Vahl, A.; Choukourov, A.
2024 - English
Neuromorphic engineering is a rapidly developing branch of science that aims to implement the unique attributes of biological neural networks in artificial devices. Most neuromorphic devices are based on the resistive switching effect, which involves changing the device’s conductivity in response to an external electric field. For instance, percolating nanoparticle (NP) networks produced by gas aggregation cluster sources (GAS) show collective spiking behavior in conductivity reminiscent of brain-like dynamics. Nevertheless, the problem of dynamic spatial reconfiguration in solid-state neuromorphic systems remains unsolved. Herein, novel nanofluids with resistive switching properties are proposed as neuromorphic media. They are produced by depositing silver NPs from GAS into vacuum-compatible liquids (paraffin, silicon oil, and PEG) without the use of surfactants or other chemicals. When the electric field is applied between two electrodes, the migration of NPs toward biased electrode is detected in all liquids. The electrophoretic nature of the NP movement was proved by means of ζ-potential measurements. Such movement led to the self-assembly of NPs in conductive paths connecting the electrodes and, as a result, to resistive switching. The electrical response was strongly dependent on the dielectric constant of the base liquid. The Ag-PEG nanofluid demonstrated the best switching performance reproducible during several tens of current-voltage cycles. The growth of flexible and reconfigurable conductive filaments in nanofluids makes them suitable media for potential realization of 3D neural networks.
Keywords:
nanofluid; gas aggregation cluster source; ζ-potential, electrophoresis
Available at various institutes of the ASCR
Surfactant-free silver nanofluids as liquid systems with neuromorphic potential
Neuromorphic engineering is a rapidly developing branch of science that aims to implement the unique attributes of biological neural networks in artificial devices. Most neuromorphic devices are based ...
Emerging Contaminants in Sewage Sludge: Analysis and Their Removal by Pyrolysis
Hušek, Matěj
2024 - English
The study continues with flame retardants (e.g., phosphorus-based or brominated) present in sludge, which may pose a hazard to nature and human health3,4. There is a lack of information on their pyrolysis removal and occurrence in the sludge in the Czech Republic.
Keywords:
sewage sludge; pyrolysis; PFAS; flame retardants
Available in a digital repository NRGL
Emerging Contaminants in Sewage Sludge: Analysis and Their Removal by Pyrolysis
The study continues with flame retardants (e.g., phosphorus-based or brominated) present in sludge, which may pose a hazard to nature and human health3,4. There is a lack of information on their ...
Cholinium Based Ionic Liquids: Influence of Water as a Co-solvent on Their Physico-chemical Properties and Preliminary Results for Dissolution of Biopolymers
Souvenir Zafindrajaona, Mahasoa-Salina
2024 - English
Ionic liquids (ILs) are emerging as promising alternative solvents in the field of natural substance extraction, offering significant advantages over traditional solvents. Since the last decade, we notice the increasing use of greener solvent alternatives such as Natural Deep Eutectic Solvents (NaDES) or ILs for the extraction of highly valuable compounds from natural sources such as lignocellulose. During this presentation, the influence of water on heat capacity, density, speed of sound and TGA will be discussed and the preliminary results for lignin dissolution willbe presented.
Available in a digital repository NRGL
Cholinium Based Ionic Liquids: Influence of Water as a Co-solvent on Their Physico-chemical Properties and Preliminary Results for Dissolution of Biopolymers
Ionic liquids (ILs) are emerging as promising alternative solvents in the field of natural substance extraction, offering significant advantages over traditional solvents. Since the last decade, we ...
Growth and Phosphorus Dynamics During Tolypothrix tenuis Cultivation – a Cyanobacterium of Biotechnological Potential
Mušálková, Petra
2024 - English
Here I investigated the course of biomass growth, phosphorus uptake and changes in intracellular phosphorus content in T. tenuis in a batch cultivation. Cultivation experiment was held in multiple bubble columns during a light regime (alternating light and dark periods 16 and 8h). Thanks to this experiment I was able to obtain a growth curve of T. tenuis. The decrease of phosphorus concentration in the medium was disproportionally faster\nthan biomass growth resulting in significant oscillations of phosphorus content in the biomass, which are typical characteristics for LPU. It was also observed, that after all phosphorus was removed from the medium, the algae growth continues over time, while obviously utilizing intracellular phosphorus reserves. These findings are valuable in course of using this cyanobacterium for efficient bioremediation of eutrophic water based on phosphorus removal by targeted algae cultivation.
Available in a digital repository NRGL
Growth and Phosphorus Dynamics During Tolypothrix tenuis Cultivation – a Cyanobacterium of Biotechnological Potential
Here I investigated the course of biomass growth, phosphorus uptake and changes in intracellular phosphorus content in T. tenuis in a batch cultivation. Cultivation experiment was held in multiple ...
Influence of Material Properties and Mixing Dynamics on Heat Transport in Granular Materials
Kokavcová, Anna
2024 - English
This study evaluates the effect of rotational speed on heat transfer and analyzes particle motion at different stirrer rotational frequencies to understand how primary and secondary flows affect heat transfer efficiency. It also examines the effect of Young’s modulus on heat transfer at different agitator\noperating speeds. Key simulation parameters and their influence 33 on heat transfer efficiency are detailed to improve the reproducibility and applicability of the results.
Keywords:
granular mixing; heat transfer; DEM
Available in digital repository of the ASCR
Influence of Material Properties and Mixing Dynamics on Heat Transport in Granular Materials
This study evaluates the effect of rotational speed on heat transfer and analyzes particle motion at different stirrer rotational frequencies to understand how primary and secondary flows affect heat ...
Electrochemical Properties of Pretomanid. New drug for Tuberculosis Treatment
Deri, M.; Vespi, M.; Giannarelli, S.; Hromadová, Magdaléna
2024 - English
The electrochemical behavior of Pretomanid (PA 824) has been investigated in acetonitrile by cyclic voltammetry at different scan rates and compared to dimetridazole reduction in order to elucidate its redox mechanism. Both compounds show similar reduction behavior in the aprotic solvent that involves one electron transfer to the nitro group. The reduction of Pretomanid is more difficult and the stability of its nitro anion radical is much lower compared to the dimetridazole molecule.
Keywords:
pretomanid; dimetridazole; cyclic voltammetry; reduction mechanism
Available on request at various institutes of the ASCR
Electrochemical Properties of Pretomanid. New drug for Tuberculosis Treatment
The electrochemical behavior of Pretomanid (PA 824) has been investigated in acetonitrile by cyclic voltammetry at different scan rates and compared to dimetridazole reduction in order to elucidate ...
Redox Properties of Pyrene-Cyclohexene Conjugates – Electrochemical Study
Koláčná, Lucie; Čubiňák, M.; Tobrman, T.; Ludvík, Jiří
2024 - English
The series of 16 compounds for "organic electronics" comprising the double-bond cyclohexene core extended by pyrene and/or other aromatics were electrochemically characterized by rotating disk voltammetry in N,N-dimethylformamide. Due to multiple substitutions, the resulting potential gap represents the sum of all substituent effects. Different combinations of substituents can be used to achieve the desired properties of cyclohexene-pyrene derivatives. The electrochemical data presented in this contribution facilitate further tuning of properties of these molecules and systems to achieve features required in material chemistry just by means of chemical modification.
Keywords:
pyrene; cyclohexene; conjugation
Available on request at various institutes of the ASCR
Redox Properties of Pyrene-Cyclohexene Conjugates – Electrochemical Study
The series of 16 compounds for "organic electronics" comprising the double-bond cyclohexene core extended by pyrene and/or other aromatics were electrochemically characterized by rotating disk ...
Electrochemical Valorization of Lignocellulosic Biomass Amination of Furfural and 5-Hydroxymethylfurfural
Donkeng Dazie, Joel; Koláčná, Lucie; Urban, Jiří; Lamač, Martin; Ludvík, Jiří
2024 - English
Furfural (FF) and 5-hydroxymethylfurfural (HMF) isolated from waste lignocellulosic biomass represent renewable sources. The present contribution deals with the transformation of FF and HMF into furfuryl amines which are important precursors namely for pharmaceutical synthesis. First, FF and HMF underwent condensation reactions with various amines which were electrochemically monitored to optimize the process. The resulting Schiff bases were identified by NMR and subsequently electrochemically reduced in basic media. The vicinal diamine (aminopinacol) was the main product besides the expected furfuryl amines. This reaction is a contribution to green synthesis because it was performed electrochemically, in water, and without any metallic catalysts.
Keywords:
furfural; 5-hydroxymethylfurfural; (di)amines
Available on request at various institutes of the ASCR
Electrochemical Valorization of Lignocellulosic Biomass Amination of Furfural and 5-Hydroxymethylfurfural
Furfural (FF) and 5-hydroxymethylfurfural (HMF) isolated from waste lignocellulosic biomass represent renewable sources. The present contribution deals with the transformation of FF and HMF into ...
Electrochemical Properties of Newly Synthesized Selaginpulvilins
Dostálová, L.; Sokolová, Romana; Schwarzová-Pecková, K.; Rýček, L.
2024 - English
The electrochemical properties of newly synthesized selaginpulvilin were investigated by cyclic voltammetry and UV-Vis spectroelectrochemistry. The subject of the study were two\nselaginpulvilins differing in the presence of a hydroxyl group in the media of 0.1 mol L-1 tetrabutylammonium hexafluorophosphate as supporting electrolyte in anhydrous acetonitrile. Both\ncompounds provided an oxidative signal in the positive region until +2.0 V.
Keywords:
oxidation; cyclic voltammetry; selaginpulvilins
Available on request at various institutes of the ASCR
Electrochemical Properties of Newly Synthesized Selaginpulvilins
The electrochemical properties of newly synthesized selaginpulvilin were investigated by cyclic voltammetry and UV-Vis spectroelectrochemistry. The subject of the study were two\nselaginpulvilins ...
3D-printed Electrodes with Nearly Ideal Charge Transfer Characteristics
Vaněčková, Eva; Sebechlebská, Táňa; Kolivoška, Viliam
2024 - English
3D printing is an outstanding manufacturing tool for prototyping customized designs at reduced time and costs, having found applications in fields such as medicine or the automotive industry. The development of printable electrically conductive composite materials brought a revolution to electrochemistry, with 3D-printed electrodes being intensively studied from the viewpoint of\nanalytical performance and stability. However, it is often reported that 3D-printed electrodes have poor charge transfer characteristics, typically due to limited exposure of the electrically conductive phase at the composite surface to the surrounding solution. In this work, we devise and apply simple electrochemical activation procedures that lead to a significant improvement of charge transfer characteristics of 3D printed electrodes.
Keywords:
three-dimensional printing; electrochemistry; electrodes
Available on request at various institutes of the ASCR
3D-printed Electrodes with Nearly Ideal Charge Transfer Characteristics
3D printing is an outstanding manufacturing tool for prototyping customized designs at reduced time and costs, having found applications in fields such as medicine or the automotive industry. The ...
NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web
Send your suggestions and comments to nusl@techlib.cz
Provider
Other bases