Number of found documents: 629
Published from to

Theoretical analysis of selected trajectories inscribed by a ball freely rolling in a spherical cavity
Náprstek, Jiří; Fischer, Cyril
2022 - English
Indirect monitoring of structures is significantly complicated when an artificial vibration absorber has to be taken into account. Knowledge of the absorber’s behaviour is necessary in order to correctly distinguish the response types obtained during an drive-by measurement. In this work, the mathematical model of the ball-type vibration absorber is used, which is based on the Lagrangian formalism. Three first integrals are identified when no external excitation nor damping is assumed. The paper illustrates the power of this approach, which enables a detailed analysis of free movement of the ball in the spherical cavity. Properties of several particular trajectories depending on initial conditions are presented. Keywords: slender structure; vibration absorber; first integral; rolling sphere; structural health monitoring Available in digital repository of the ASCR
Theoretical analysis of selected trajectories inscribed by a ball freely rolling in a spherical cavity

Indirect monitoring of structures is significantly complicated when an artificial vibration absorber has to be taken into account. Knowledge of the absorber’s behaviour is necessary in order to ...

Náprstek, Jiří; Fischer, Cyril
Ústav teoretické a aplikované mechaniky, 2022

Long term optical monitoring technique of displacement fields based on ArUco markers
Kunecký, Jiří
2022 - English
In structural engineering it is often needed to measure tiny displacements of parts of the structure extremely precisely. For such a purpose it is often needed to use some type of sensor attached to the surface of the structure. This paper presents a new technique which simply uses computer vision libraries to measure displacement of markers originally developed for robotics. Such analysis can be under specific circumstances (2D planar movement) valid if we compare two images taken at different times with the same camera. Main advantage of this method is simplicity of use and low cost of markers, which can be printed in a standard office laser printer. The resolution (error) can be for standard cameras around 0.1 pixel. The method is especially developed for research of timber frames/joints behavior in real structures, because displacements of joints in creep or under load can reach an amplitude which is perfectly detectable by this method. Keywords: displacement measurement; long-term monitoring; ArUco markers Available at various institutes of the ASCR
Long term optical monitoring technique of displacement fields based on ArUco markers

In structural engineering it is often needed to measure tiny displacements of parts of the structure extremely precisely. For such a purpose it is often needed to use some type of sensor attached to ...

Kunecký, Jiří
Ústav teoretické a aplikované mechaniky, 2022

Analysis of van der Pol equation on slow time scale for combined random and harmonic excitation
Náprstek, Jiří; Fischer, Cyril
2022 - English
Vortex shedding represents one of the most important processes that constantly attract the attention of experimental and theoretical research. A number of non-linear effects arise from the fluid-structure interaction. The non-stationary response in the vicinity of the lock-in region has a quasi-periodic character, beating frequency of which varies considerably with the distance from the lock-in frequency. This property is significantly affected by the assumption of combined random and harmonic excitation. This paper describes several details that contribute to the probabilistic characteristics of the system on a time-slow scale using partial response amplitudes. Keywords: SDOF oscillator; slow-time system; Fokker-Planck equation Available at various institutes of the ASCR
Analysis of van der Pol equation on slow time scale for combined random and harmonic excitation

Vortex shedding represents one of the most important processes that constantly attract the attention of experimental and theoretical research. A number of non-linear effects arise from the ...

Náprstek, Jiří; Fischer, Cyril
Ústav teoretické a aplikované mechaniky, 2022

Construction of the Lyapunov function reflecting the physical properties of the model
Náprstek, Jiří; Fischer, Cyril
2022 - English
Practical experience shows that the random excitation component can affect the system response and its dynamic stability not only negatively but also positively. Such mechanisms are usually developed heuristically and are often not sufficiently justified theoretically. The paper presents a possibility of using the properties of first integrals for the construction of a Lyapunov function for the analysis of a dynamic system stability in the stochastic domain. In such case, the Lyapunov function itself contains information on the examined system and, consequently, it is able to provide a more detailed insight into the system stability properties. The procedure is illustrated by a nonlinear SDOF example. Keywords: Lyapunov function; stability; spherical pendulum Available at various institutes of the ASCR
Construction of the Lyapunov function reflecting the physical properties of the model

Practical experience shows that the random excitation component can affect the system response and its dynamic stability not only negatively but also positively. Such mechanisms are usually developed ...

Náprstek, Jiří; Fischer, Cyril
Ústav teoretické a aplikované mechaniky, 2022

Analytical model of joint loaded perpendicular to wooden grain
Hataj, M.; Pošta, J.; Hasníková, Hana; Kunecký, Jiří
2022 - English
Computing models for structural behaviour and determination of traditional timber butt joints using analytical relations are presented in this paper. A component method is the base of the computing technique introduced herein. This method is usually used for steel joint design. The component method is based on dividing a joint into individual components. These are defined by partial joint component stiffness. An analytical solution includes a subsidence effect of wooden material close to compressive loading. Analytical computation results are compared with the experimental outputs. A design procedure according to Eurocode 5 for a load capacity determination of perpendicularly loaded structural elements is stated in the paper. Keywords: analytical models; load capacity; butt joint; carpentry; timber structures Available at various institutes of the ASCR
Analytical model of joint loaded perpendicular to wooden grain

Computing models for structural behaviour and determination of traditional timber butt joints using analytical relations are presented in this paper. A component method is the base of the computing ...

Hataj, M.; Pošta, J.; Hasníková, Hana; Kunecký, Jiří
Ústav teoretické a aplikované mechaniky, 2022

Wooden construction of the movable roof of the garden pavilion in Český Krumlov castle
Bláha, Jiří; Kloiber, Michal
2022 - English
A remarkable technical monument is situated on one of the garden terraces belonging to the state castle and chateau in Český Krumlov. The umbrella-shaped roof of the lookout pavilion can be lifted about a meter above the masoned parapet allowing the visitor a beautiful view of the World Heritage town panorama when the weather is fine. In windy conditions or in case of heavy rain the roof could be lowered and the pavilion thus closed. The lifting is operated by means of a wooden lever mechanism with a counterweight box hidden in the basement level of the building. The unique construction was built in 1823 and needed to be partially altered in 1830-1835. However, since then it has been preserved in a surprisingly authentic state even allowing practical demonstrations of its original function. Prior to recent repairs in 2016, a comprehensive non-destructive survey was conducted. The extent of the damage discovered was determined by measuring the speed of elastic wave propagation using stress waves (Fakkop 2D) and measuring the mechanical resistance when drilling with a thin bit using resistance micro-drilling (Resistograph). Another method based on loading timber by means of a\nminiature loading jack inserted into a drilled hole was selected to determine the current mechanical properties. Keywords: lookout pavilion; gazebo; non-destructive testing; roof; timber; wood Available at various institutes of the ASCR
Wooden construction of the movable roof of the garden pavilion in Český Krumlov castle

A remarkable technical monument is situated on one of the garden terraces belonging to the state castle and chateau in Český Krumlov. The umbrella-shaped roof of the lookout pavilion can be lifted ...

Bláha, Jiří; Kloiber, Michal
Ústav teoretické a aplikované mechaniky, 2022

Aerodynamic interference forces acting on two square prisms in a model atmospheric boundary layer
Macháček, Michael; Lo, Y. L.; Máca, J.
2022 - English
The presented experimental analysis focuses on the definition of interference factors for aerodynamic forces acting on two square prisms depending on their relative position. Both prisms used had the same dimensions and a height to width ratio of 6 - this ratio is relatively common in high-rise buildings. The experiment was performed in a wind tunnel with a model atmospheric boundary layer, which represented a dense urban area. The forces acting at the base of one of the buildings were measured, and by moving the other building it was possible to measure 204 mutual configurations, i.e., 204 interference positions. In all positions, the windward facades of the small-area model were placed perpendicular to the direction of the incoming flow. This created a detailed map of the interference effect on a wind-loaded pair of buildings. The results show a significant effect of the relative position of buildings on wind loads. A significant increase in\nload occurred due to the proximity of buildings. Due to the interference effect, wind load fluctuations can increase by up to 28% and average values by up to 36%. Keywords: interference effect; two square prisms; wind tunnel experiments; turbulent boundary layer Available in digital repository of the ASCR
Aerodynamic interference forces acting on two square prisms in a model atmospheric boundary layer

The presented experimental analysis focuses on the definition of interference factors for aerodynamic forces acting on two square prisms depending on their relative position. Both prisms used had the ...

Macháček, Michael; Lo, Y. L.; Máca, J.
Ústav teoretické a aplikované mechaniky, 2022

Tomographic investigation of the sandstone fracture toughness
Vavřík, Daniel; Beneš, Pavel; Fíla, Tomáš; Koudelka_ml., Petr; Kumpová, Ivana; Vavro, Martin
2022 - English
It is well known that the measured values of the fracture toughness of quasi brittle materials are influenced by material heterogeneity, dimensions, boundary conditions, and unequal tension and compression properties. Standard testing methods supposing isotropic material, in contrary the quasi-brittle materials differ from this theoretical expectation, therefore this approach may fail. The authors present Local Fracture Toughness Testing (LFTT) method to overcome this obstacle. LFFT based on a complex methodology using a series of tomographic reconstructions recorded during specimen loading is calculated independently of the outside boundary conditions. Keywords: fracture process zone; crack path; quasi-brittle material; X-Ray computed tomography; four-point bending test Available in digital repository of the ASCR
Tomographic investigation of the sandstone fracture toughness

It is well known that the measured values of the fracture toughness of quasi brittle materials are influenced by material heterogeneity, dimensions, boundary conditions, and unequal tension and ...

Vavřík, Daniel; Beneš, Pavel; Fíla, Tomáš; Koudelka_ml., Petr; Kumpová, Ivana; Vavro, Martin
Ústav teoretické a aplikované mechaniky, 2022

Stone surface topography of Prague historic monuments over the centuries
Kovářová, K.; Cihla, Michal; Malát, R.; Semerád, M.; Tryml, M.
2022 - English
Stonemasons tool traces on stone surface are undoubtably a significant part of monument historic value. As any other profession, stonemasons craft develops over time and has its own specifics in every period. Each work has its own unique pattern and bears traces of individual stonemason workshops, tradition, etc. The study of building stone cutting is based on evolving methods of mechanoscopy and analytical traceology. Stone traceology deals with traces in material and the subsequent reconstruction of tools and the processes of stoneworking. The interpretation of data in terms of determining the actual trace is called a mechanoscopy. When studying a stone surface, the latest 3D modelling technology is used with subsequent analyses by means of Global Mapper software. The use of these methods enables reconstruction of the craftsman’s tools. The presented article is an extract of a study that systematically maps the stone cutting work in the territory of Prague from the oldest buildings to the present day. For example, stonework in 9th century Prague was gradually evolving from simple stone block modelling to sophisticated cutting of blocks in the 12th century. This information can be very useful in the process of monument care. Keywords: stone topography; Prague; craftmanship; stonemason tool; tool traces Available at various institutes of the ASCR
Stone surface topography of Prague historic monuments over the centuries

Stonemasons tool traces on stone surface are undoubtably a significant part of monument historic value. As any other profession, stonemasons craft develops over time and has its own specifics in every ...

Kovářová, K.; Cihla, Michal; Malát, R.; Semerád, M.; Tryml, M.
Ústav teoretické a aplikované mechaniky, 2022

Creep of oak dowel: various loading and environmental conditions
Hasníková, Hana; Kunecký, Jiří; Hataj, M.
2022 - English
For research of timber joints, the crucial role in force distribution inside the joint is played by distribution and variability of stiffness of the dowels. Not only the instant stiffness, but the one that we can encounter after some longer period. Also, this value and its statistical distribution is influenced by many other factors, however, humidity and temperature are in timber (oak) dowels of utmost importance. In the work results of a creep experiment made using a special testing rig is presented. It has been found, that biggest changes in creep behavior are in case if very humid conditions are present, and, also, that cycling the temperature in high humidity conditions can produce about 104% of the original instantaneous displacement. The result is not surprising, however, new insights are made thanks to relatively high number of samples and ability to produce some statistics. Another outcome is relation of dowel stiffness in time to the level of applied stress, which is quantified in the article. Keywords: oak dowel; creep; humidity Available at various institutes of the ASCR
Creep of oak dowel: various loading and environmental conditions

For research of timber joints, the crucial role in force distribution inside the joint is played by distribution and variability of stiffness of the dowels. Not only the instant stiffness, but the one ...

Hasníková, Hana; Kunecký, Jiří; Hataj, M.
Ústav teoretické a aplikované mechaniky, 2022

About project

NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web

Send your suggestions and comments to nusl@techlib.cz

Provider

http://www.techlib.cz

Facebook

Other bases