Image analysis of particle size: effect of light source type
Formánek, R.; Kysela, Bohuš; Šulc, R.
2018 - English
Agitation of two immiscible liquids or solid-liquid suspension is a frequent operation in chemical and metallurgical industries. The sizes of particles, bubbles or droplets can be determined by the Image Analysis Technique. It is known that the quality of captured images depends significantly on the original image background that is mainly affected by the type of the light source. The aim of this contribution is to investigate the effect of light source type on image quality. The four types of light sources were tested: 1) 1000 W halogen lamp, 2) 72 W LED bar panel, 3) 60 W LED chip, and 4) 90 W LED chip. The illumination intensity and image background quality were investigated for each tested light sources. The effect of the shutter speed on evaluated particle sizes was tested using monodisperse spherical calibration particles having diameter of 1.19 mm. The difference observed between particle sizes evaluated by image analysis for given light source and declared calibration particle diameter was used as a measure of light source quality.
Available at various institutes of the ASCR
Image analysis of particle size: effect of light source type
Agitation of two immiscible liquids or solid-liquid suspension is a frequent operation in chemical and metallurgical industries. The sizes of particles, bubbles or droplets can be determined by the ...
Settling slurry flow near deposition velocity in inclined pipe of negative slope
Kesely, Mikoláš; Matoušek, Václav; Vlasák, Pavel
2018 - English
Pipe flow of sand-water slurry (settling slurry) is sensitive to pipe inclination. The effect of the angle to which the partially stratified flow is inclined from the horizontal has been subject to investigation in numerous studies. However, almost all of them focus on ascending flows, i.e. flows inclined to positive angles of inclination. It is well known that settling slurry flows inclined to negative slopes (descending flows) differ from those inclined to positive slopes, particularly at velocities near the deposition limit. The deposition limit velocity is the flow velocity at which stationary deposit starts to be formed at the bottom of the pipe. We investigate the effect of the negative slope on pipe flow near deposition limit velocity in the broad range of inclination angles. Besides the deposition limit, we focus on the distribution of solids across the pipe cross section. We combine experimental approach with mathematical modelling. Our new experiments with medium-to-coarse sand (mass-medium grain size 0.87 mm) in a 100-mm pipe inclined from 0 to -45 degree provide suitable data for a validation of predictions of our layered model for partially stratified flows in inclined pipes.
Available at various institutes of the ASCR
Settling slurry flow near deposition velocity in inclined pipe of negative slope
Pipe flow of sand-water slurry (settling slurry) is sensitive to pipe inclination. The effect of the angle to which the partially stratified flow is inclined from the horizontal has been subject to ...
Effect of pipe inclination on flow behaviour of fine-grained settling slurry
Vlasák, Pavel; Chára, Zdeněk; Matoušek, Václav; Konfršt, Jiří; Kesely, Mikoláš
2018 - English
The effect of flow parameters of fine-grained settling slurry on the pressure drop-velocity relationship, deposition limit velocity and local concentration distribution was studied in an experimental pipe loop of inner diameter D = 100 mm with inclinable pipe sections for pipe inclination ranging from – 45° to +45°. The slurry consisted from water and narrow particle size distribution glass beads of mean diameter d50 = 0.18 mm. The concentration distribution was studied with application of a gamma-ray densitometry. The deposition velocity was defined as the flow velocity at which stationary deposit started to be formed at the pipe invert. The study revealed the stratified flow pattern of the studied slurry in inclined pipe sections, for slurry velocities below to the deposition limit sliding or stationary bed were created in ascending pipe sections. For low pipe inclination ( < ± 25°) the effect of inclination on local concentration distribution was not significant. Mean transport concentration for descending flow was lower than that for the ascending flow Deposition limit in inclined pipe was slightly lower than that in horizontal pipe. Frictional pressure drops in ascending pipe were higher than that in descending pipe, the difference decreased with increasing velocity and inclination.
Available at various institutes of the ASCR
Effect of pipe inclination on flow behaviour of fine-grained settling slurry
The effect of flow parameters of fine-grained settling slurry on the pressure drop-velocity relationship, deposition limit velocity and local concentration distribution was studied in an experimental ...
Turbulence characteristics scaling in Rushton turbine impeller discharge flow: effect of PIV system setup
Šulc, R.; Ditl, P.; Fořt, I.; Jašíková, D.; Kotek, M.; Kopecký, V.; Kysela, Bohuš
2018 - English
Study of mechanism of turbulent energy dissipation rate in the impeller discharge stream from a standard Rushhton turbine impeler in a model cylyndrical vessel with radial baffles.
Available at various institutes of the ASCR
Turbulence characteristics scaling in Rushton turbine impeller discharge flow: effect of PIV system setup
Study of mechanism of turbulent energy dissipation rate in the impeller discharge stream from a standard Rushhton turbine impeler in a model cylyndrical vessel with radial baffles.
Experimental investigation of settling slurry flow in inclined pipe sections
Vlasák, Pavel; Chára, Zdeněk; Matoušek, Václav; Kesely, Mikoláš; Konfršt, Jiří
2018 - English
Narrow particle size distribution glass beads-water slurry flow in the pipe sections of different inclination were investigated on an experimental pipe loop of inner diameter D = 100 mm. The study refers to the effect of pipe inclination and slurry velicity on local concentration distribution, pressure drop-velocity relationship, and deposition limit. The study revealed that the glass beads-water mixtures in the inclined pipe sections were significantly stratified: the solid particles moved principally close to the pipe invert, and for flow velocities close to the deposition limit sliding bed or stationary deposit is created even in inclined pipe sections.
Keywords:
settling slurry; inclined pipe; pressure drops; concentration distribution; radiometry
Available at various institutes of the ASCR
Experimental investigation of settling slurry flow in inclined pipe sections
Narrow particle size distribution glass beads-water slurry flow in the pipe sections of different inclination were investigated on an experimental pipe loop of inner diameter D = 100 mm. The study ...
Dependence of morphology of electrospun PVB nanofibres containing fumed silica on elasticity of the processed solutions
Peer, Petra; Polášková, M.; Filip, Petr
2017 - English
Application of various types of fumed silica gives a possibility to tailor a degree of hydrophilicity or hydrophobicity of the resulting electrospun nanofibrous mats where as a basic polymeric material is taken poly(vinyl butyral) (PVB) solved in methanol. Presence of fumed silica substantially changes viscoelastic attributes in comparison with the neat PVB solution.\nThe aim of this contribution is to compare morphological structures of the resulting electrospun mats generated from the solutions with presence and absence of various types of fumed silica differing in surface morphology, size and the specific surface area. This comparison is based on the rheological characteristics with the emphasis to elasticity of the pre-processed solutions. The differences in elasticity among fumed silica based solutions are indeed remarkable. The obtained results show that elasticity does not play a crucial role in creation and morphological aspects of the corresponding nanofibrous mats including fibres diameter.
Keywords:
rheology; elasticity; PVB solution; fumed silica; electrospinning
Available at various institutes of the ASCR
Dependence of morphology of electrospun PVB nanofibres containing fumed silica on elasticity of the processed solutions
Application of various types of fumed silica gives a possibility to tailor a degree of hydrophilicity or hydrophobicity of the resulting electrospun nanofibrous mats where as a basic polymeric ...
Local velocity scaling in T400 vessel agitated by Rushton turbine in a fully turbulent region
Šulc, R.; Ditl, P.; Fořt, I.; Jašíková, D.; Kotek, M.; Kopecký, V.; Kysela, Bohuš
2017 - English
The hydrodynamics and flow field were measured in an agitated vessel using 2-D Time Resolved Particle Image Velocimetry (2-D TR PIV). The experiments were carried out in a fully baffled cylindrical flat bottom vessel 400 mm in inner diameter agitated by a Rushton turbine 133 mm in diameter. The velocity fields were measured in the zone in upward flow to the impeller for impeller rotation speeds from 300 rpm to 850 rpm and three liquids of different viscosities (i.e. (i) distilled water, ii) a 28% vol. aqueous solution of glycol, and iii) a 43% vol. aqueous solution of glycol), corresponding to the impeller Reynolds number in the range 50 000 < Re < 189 000. This Re range secures the fully-developed turbulent flow of agitated liquid. In accordance with the theory of mixing, the dimensionless mean and fluctuation velocities in the measured directions were found to be constant and independent of the impeller Reynolds number. On the basis of the test results the spatial distributions of dimensionless velocities were calculated. The axial turbulence intensity was found to be in the majority in the range from 0.388 to 0.540, which corresponds to the high level of turbulence intensity.
Keywords:
agitated vessel; Rushton turbine; PIV
Fulltext is available at external website.
Local velocity scaling in T400 vessel agitated by Rushton turbine in a fully turbulent region
The hydrodynamics and flow field were measured in an agitated vessel using 2-D Time Resolved Particle Image Velocimetry (2-D TR PIV). The experiments were carried out in a fully baffled cylindrical ...
Evaluation of the turbulent kinetic dissipation rate in an agitated vessel
Kysela, Bohuš; Konfršt, Jiří; Chára, Zdeněk; Sulc, R.; Jašíková, D.
2017 - English
The design of agitated tanks depends on operating conditions and processes for that are used for. An important parameter for the scale-up modelling is the dissipation rate of the turbulent kinetic energy. The dissipation rate is commonly assumed to be a function of the impeller power input. But this approach gives no information about distribution of the dissipation rate inside the agitated volume. In this paper the distributions of the dissipation rate inside the agitated vessels are estimated by evaluations of the CFD (Computational Fluid Dynamics). The results obtained from RANS (Reynolds Averaged Navier-Stokes equations) k-epsilon turbulent model and LES (Large Eddy Simulations) with Smagorinsky SGS (Sub Grid Scale) model are compared. The agitated vessels with standard geometry equipped with four baffles and stirred by either a standard Rushton turbine or a high shear impeller were investigated. The results are compared with mean dissipation rate estimated from the total impeller power input.
Keywords:
flow; large-eddy simulation
Fulltext is available at external website.
Evaluation of the turbulent kinetic dissipation rate in an agitated vessel
The design of agitated tanks depends on operating conditions and processes for that are used for. An important parameter for the scale-up modelling is the dissipation rate of the turbulent kinetic ...
Flow behaviour and structure of heterogeneous particles-water mixture in horizontal and inclined pipes
Vlasák, Pavel; Chára, Zdeněk; Konfršt, Jiří
2017 - English
Available at various institutes of the ASCR
Flow behaviour and structure of heterogeneous particles-water mixture in horizontal and inclined pipes
Simulation of collagen solution flow in rectangular capillary
Kysela, Bohuš; Skočilas, J.; Zitny, R.; Stancl, J.; Houska, M.; Landfeld, A.
2017 - English
The viscoelastic properties of foods and polymers can be evaluated from flow of the material in capillary with specified dimension and shape. The extrusion rheometer equipped by capillary with rectangular cross-section was used for determination of the rheological behaviour of water collagen solution. The measurements of the axial profiles in longitudinal direction of the total stresses at capillary wall were performed for various shear rates. The linear viscoelastic model of Oldroyd B type: White-Metzner model was used for simulation of fluid flow in OpenFOAM software package. The simulations describe the effect of relaxation time on wall total stress in convergent-divergent capillary.
Keywords:
collagen; viscoelastic model; convergent-divergent capillary
Fulltext is available at external website.
Simulation of collagen solution flow in rectangular capillary
The viscoelastic properties of foods and polymers can be evaluated from flow of the material in capillary with specified dimension and shape. The extrusion rheometer equipped by capillary with ...
NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web
Send your suggestions and comments to nusl@techlib.cz
Provider
Other bases