Composites based on bioglass
Balík, Karel; Sochor, M.; Suchý, Tomáš; Černý, Martin; Sedláček, R.
2004 - English
The development of a C/C composite in a form of intevertebral cages and comparision with composite based on glass and polysiloxane were described. Vývoj C/C kompozitů jako mezitělových rozpěrek a porovnání těchto kompozitů s kompozity na bázi skla a polysiloxanů.
Keywords:
glass-polymer composites; biomaterial
Available at various institutes of the ASCR
Composites based on bioglass
The development of a C/C composite in a form of intevertebral cages and comparision with composite based on glass and polysiloxane were described....
Intervertebral Cages Based on Carbon-Carbon Composites - Experimental Measurements
Sochor, M.; Balík, Karel; Suchý, Tomáš; Tichý, P.; Sedláček, R.
2003 - English
In this paper are presented some results of project of carbon-carbon composite used for treatment of some human lumbar spine injuries in the form of the intervertebral cages.
Keywords:
C-C composite; mechanical testing; biocompatibility
Available at various institutes of the ASCR
Intervertebral Cages Based on Carbon-Carbon Composites - Experimental Measurements
In this paper are presented some results of project of carbon-carbon composite used for treatment of some human lumbar spine injuries in the form of the intervertebral cages.
Mechanical Testing of Carbon-Carbon Composite for Applications in Human Spine Surgery in the Form of Intervertebral Cages
Sochor, M.; Balík, Karel; Suchý, Tomáš; Sedláček, R.; Tichý, P.
2003 - English
In this paper are presented results of mechanical testing of carbon-carbon composites to be used in human spine surgery in the form of the intervertebral cages.
Keywords:
carbon-carbon composite; mechanical testing; biocompatibility
Available at various institutes of the ASCR
Mechanical Testing of Carbon-Carbon Composite for Applications in Human Spine Surgery in the Form of Intervertebral Cages
In this paper are presented results of mechanical testing of carbon-carbon composites to be used in human spine surgery in the form of the intervertebral cages.
The comparative characteristics of co-pyrolysis coal/waste tires and coal/waste plastics
Kříž, Vlastimil; Buchtele, Jaroslav
2003 - English
Co-pyrolysis of hard coal with waste tires and mixed waste plastics in a stationary bed (quartz reactor, 900 C). The yields, properties and composition of coke, tar, reaction water and gas were evaluated.
Keywords:
coal; waste tires; waste plastics; uhlí
Available at various institutes of the ASCR
The comparative characteristics of co-pyrolysis coal/waste tires and coal/waste plastics
Co-pyrolysis of hard coal with waste tires and mixed waste plastics in a stationary bed (quartz reactor, 900 C). The yields, properties and composition of coke, tar, reaction water and gas were ...
Characteristics of Materials to Be Used in Bone Surgery
Sochor, M.; Balík, Karel; Sedláček, R.; Tichý, P.; Suchý, Tomáš
2002 - English
The paper presented deals with mechanical testing of C-C composite materials useable in orthopeady in the form of intervertebral cages applied at lumbar spine injuries treatment. Some results obtained are presented in this paper.
Keywords:
C-C composite; mechanical testing; biocompatibility
Available at various institutes of the ASCR
Characteristics of Materials to Be Used in Bone Surgery
The paper presented deals with mechanical testing of C-C composite materials useable in orthopeady in the form of intervertebral cages applied at lumbar spine injuries treatment. Some results obtained ...
Young's modulus of heat-resistant fibrous composites at elevated temperatures
Černý, Martin; Glogar, Petr; Nekoksa, Pavel
2002 - English
Elastic behaviour of unidirectional composites with matrix derived from cured polysiloxanes and reinforced with SiC (Nicalon) or alumina (Nextel) fibres was measured at temperatures up to 1300řC in order to assess limits of their potential utilization as structural material in air environment.
Keywords:
young's modulus; fibrous composite
Available at various institutes of the ASCR
Young's modulus of heat-resistant fibrous composites at elevated temperatures
Elastic behaviour of unidirectional composites with matrix derived from cured polysiloxanes and reinforced with SiC (Nicalon) or alumina (Nextel) fibres was measured at temperatures up to 1300řC in ...
Inventory maps and modelling of slope movements using Arc View software
Klimeš, Jan; Guzzetti, F.; Cardinali, M.
2002 - English
Article deals with methods and results of landslide inventory mapping in the region of Umbria, Italy and District of Vsetín, Czech Republic. Possibilities of prediction of spatial distribution of shallow landslides using landslides inventory maps and SINMAP Arc View extension were also discused.
Keywords:
inventory maps; modelling of slope movements; GIS
Available at various institutes of the ASCR
Inventory maps and modelling of slope movements using Arc View software
Article deals with methods and results of landslide inventory mapping in the region of Umbria, Italy and District of Vsetín, Czech Republic. Possibilities of prediction of spatial distribution of ...
Evolution of ore-forming fluids along the Rožná-Olší shear zone, Bohemian Massif, Czech Republic: Implications for local uranium deposition and comparison with U-mineralization at Schlema, Erzgebirge, Germany
Hein, U.; Lehman, B.; Kříbek, B.; René, Miloš
2002 - English
The late-Variscan primary uranium mineralization was precipitated from low-salinity aqueous solutions at epithermal conditions. The overall temporal evolution of the ore forming fluids is identical with that of polymetallic vein-type systems in large parts of Western and Central Europe.
Keywords:
ore fluids; uranium
Available at various institutes of the ASCR
Evolution of ore-forming fluids along the Rožná-Olší shear zone, Bohemian Massif, Czech Republic: Implications for local uranium deposition and comparison with U-mineralization at Schlema, Erzgebirge, Germany
The late-Variscan primary uranium mineralization was precipitated from low-salinity aqueous solutions at epithermal conditions. The overall temporal evolution of the ore forming fluids is identical ...
Co-pyrolysis coal/waste tyres
Kříž, Vlastimil; Brožová, Zuzana; Buchtele, Jaroslav
2002 - English
Co-pyrolysis of hard coal, scrap tyres and its mixtures in stationary bed. The yields, properties and composition of products were evaluated.
Keywords:
coal; waste rubber; co-pyrolysis; uhlí
Available at various institutes of the ASCR
Co-pyrolysis coal/waste tyres
Co-pyrolysis of hard coal, scrap tyres and its mixtures in stationary bed. The yields, properties and composition of products were evaluated.
Report on initiation of morphotectonic research of the contact zone of the Rychlebské hory Mts. and the Hrubý Jeseník Mts
Štěpančíková, Petra
2002 - English
The contribution deals with manifestation of tectonic activity along the Marginal Sudetic Fault being tectonicly active since Prevariscan period. Present-day tectonics is monitored by using of extensometric gauge TM-71.
Keywords:
morphotectonics; recent tectonics; Sudetic Fault
Available at various institutes of the ASCR
Report on initiation of morphotectonic research of the contact zone of the Rychlebské hory Mts. and the Hrubý Jeseník Mts
The contribution deals with manifestation of tectonic activity along the Marginal Sudetic Fault being tectonicly active since Prevariscan period. Present-day tectonics is monitored by using of ...
NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web
Send your suggestions and comments to nusl@techlib.cz
Provider
Other bases