No (7633)
Number of found documents:
7633
Published from
to
Analyzing stochastic stability of a gyroscope through the stochastic Lyapunov function
Náprstek, Jiří; Fischer, Cyril
2023 - English
The text delves into the application of first integrals in the construction of Lyapunov functions for analyzing the stability of dynamic systems in stochastic domains. It emphasizes the distinct characteristics of first integrals that warrant the introduction of additional constraints to ensure the essential properties required for a Lyapunov function. These constraints possess physical interpretations associated with system stability. The general approach to testing stochastic stability is illustrated using the example of a 3-degrees-of-freedom system representing a gyroscope.
Keywords:
stochastic stability; Lyapunov function; first integral; gyroscope
Available at various institutes of the ASCR
Analyzing stochastic stability of a gyroscope through the stochastic Lyapunov function
The text delves into the application of first integrals in the construction of Lyapunov functions for analyzing the stability of dynamic systems in stochastic domains. It emphasizes the distinct ...
Experimental and numerical investigation of the frequency-modal properties of the switch box
Zolotarev, Igor; Pešek, Luděk; Bula, Vítězslav; Šnábl, Pavel; Gabriel, Dušan; Mračko, Michal; Masák, Jan
2023 - English
The research is linked to increase of seismic resistivity of data board switch boxes. Therefore we deal with numerical modelling of the box for finding the hot spots and designing appropriate modifications. This paper deals with numerical and experimental frequency-modal properties of the switch box and mutual comparison for numerical model validation.
Keywords:
modal analysis; natural frequencies; eigen-modes of vibration
Available at various institutes of the ASCR
Experimental and numerical investigation of the frequency-modal properties of the switch box
The research is linked to increase of seismic resistivity of data board switch boxes. Therefore we deal with numerical modelling of the box for finding the hot spots and designing appropriate ...
Engineering Mechanics 2023
Radolf, Vojtěch; Zolotarev, Igor
2023 - English
The proceedings contains papers presented at the 29th International Conference on Engineering Mechanics, which has been held in OREA Resort Devět Skal in Czech Republic under auspices of the Czech Society of Mechanics and being a part of IFTOMM (The International Federation for the Promotion of Mechanism and Machine Science) activities. As it corresponds with character of the conference, this proceedings consists of several topic oriented parts: Biomechanics, Fluid mechanics, Dynamics, Fracture mechanics, Mechatronics, Reliability of structures, Mechanics of solids, Technological processes, Thermodynamics. The volume represents a well-balanced overview of theoretical, numerical and experimental work on fundamental and applied studies.
Keywords:
biomechanics; dynamics; mechatronics; fluid mechanics; mechanics of solids; fracture mechanics
Available at various institutes of the ASCR
Engineering Mechanics 2023
The proceedings contains papers presented at the 29th International Conference on Engineering Mechanics, which has been held in OREA Resort Devět Skal in Czech Republic under auspices of the Czech ...
Conductive open-cell silicone foam for modulatable damping and impact sensing applications
Preuer, R.; Šleichrt, Jan; Kytýř, Daniel; Graz, I.
2023 - English
Nature has long served as a source of inspiration for the development of new materials, with foam-like structures in fruits such as oranges and pamelos serving as examples of efficient energy dissipation. In this study, we present the synthesis and characterization of a conductive silicone foam for potential impact sensing applications. By blending Sylgard 184 and Carbon Black, we create a highly porous structure capable of dissipating energy and modulating its resistance. To investigate the properties of the foam, we utilized both micro-computer tomography (μCT) and scanning electron microscopy (SEM) imaging techniques. The μCT imaging revealed the intricate pore network of the foam, reminiscent of the complex structure found in natural sponges. SEM imaging allowed for observation of the uniform distribution of Carbon Black particles within the foam, enabling the conductive properties of the foam. The foam’s mechanical behavior was characterized by a compression test under μCT imaging to measure the deformation behavior and changes in the foam’s resistance. Additionally, a ball drop test was conducted to investigate the foam’s damping behavior while simultaneously measuring the impact location by the local change in resistance. Remarkably, our results demonstrate the exceptional damping capabilities of the conductive silicone foam, with the damping ratio modulated by adjusting the degree of compression-induced deformation. This is attributed to the collapse of the foam’s porous structure, resulting in a significant increase in the foam’s contact area. Overall, our study provides valuable insights into the behavior of conductive silicone foams and their potential as an impact sensing material. The use of both CT and SEM imaging techniques allows for a comprehensive understanding of the foam’s properties, which can be optimized for a variety of applications. The foam’s ability to modulate its damping properties by adjusting the degree of deformation provides a promising avenue for future research in the field of materials science and engineering.
Keywords:
silicone foam; conductive properties; deformation behaviour; damping
Available at various institutes of the ASCR
Conductive open-cell silicone foam for modulatable damping and impact sensing applications
Nature has long served as a source of inspiration for the development of new materials, with foam-like structures in fruits such as oranges and pamelos serving as examples of efficient energy ...
Characterization of five mosaic mortar beds from Austria produced by A. Neuhauser/Tiroler Glasmalerei and J. Pfefferle
Bauerová, Pavla; Frankeová, Dita; Slížková, Zuzana
2023 - English
The report contains the results of material analyses of five mortar beds of mosaics produced by the Austrian studios Neuhauser/Tiroler Glasmalerei and Josef Pfefferle. The analysed samples come from mosaics made at the turn of the 19th and 20th centuries and located in various places in Tyrol. The mortars were analysed by SEM-EDS and thermal analysis. The results showed that, in addition to traditional materials such as marble dust, they also contain atypical or innovative components such as waste ceramic and glass shards or early Portland cement.
Keywords:
SEM-EDS analysis; historic mortar; mosaic; thermal analysis
Available at various institutes of the ASCR
Characterization of five mosaic mortar beds from Austria produced by A. Neuhauser/Tiroler Glasmalerei and J. Pfefferle
The report contains the results of material analyses of five mortar beds of mosaics produced by the Austrian studios Neuhauser/Tiroler Glasmalerei and Josef Pfefferle. The analysed samples come from ...
Measurements on Turbine Cascade KOBRA
Luxa, Martin; Hála, Jindřich; Šimurda, David
2023 - English
The report contains results and evaluation of aerodynamic measurement on a blade cascade representing the section imitating the conical stream line in the last rotor row of a gas trubine under considerable off-design condition. The research report contains detailed specifications of the measured model, overview of the results of the optical measurements (interferometry, schlieren method in Toepler configuration) and pneumatic measurements (traversing with five hole conical probe downstream the cascade).
Keywords:
turbine cascade; turbine off-design condition; tarnsonic flow
Available at various institutes of the ASCR
Measurements on Turbine Cascade KOBRA
The report contains results and evaluation of aerodynamic measurement on a blade cascade representing the section imitating the conical stream line in the last rotor row of a gas trubine under ...
Fast continuous in-situ XCT of additively manufactured carbon fiber reinforced tensile test specimens
Glinz, J.; Maurer, J.; Holzleitner, M.; Pace, F.; Stamopoulos, A.; Vopálenský, Michal; Kumpová, Ivana; Eckl, M.; Kastner, J.; Senck, S.
2023 - English
The reinforcement of fused filament fabricated (FFF) components with continuous fibers allows for high versatility in the design of mechanical properties for a specific application’s needs. However, the bonding quality between continuous fibers and the FFF matrix material has high impact on the overall performance of the composite. In a recent study [1], additively manufactured (AM) continuous fiber reinforced tensile test specimens have been investigated regarding the effect of amount and material of the embedded continuous fibers on tensile strength and AM build quality. During these tensile tests, a sudden reduction in tensile stress, which most likely was not related to actual rupture of continuous fibers, was noticeable. Since X-ray computed tomography (XCT) scans were performed only prior to and after the tensile testing, a detailed investigation on the origin of these drops in tensile stress was not possible. Within this work, we will expand upon these findings and present results of fast on-the-fly in-situ investigations performed on continuous carbon fiber reinforced specimens of the same AM build. During these investigations, specimens are loaded under the same conditions while fast XCT scans, with a total scan time of 12 seconds each, were performed consecutively. The resulting three-dimensional image data reveals internal meso- and macro-structural changes over time/strain to find the cause of the aforementioned reduction in tensile stress.
Keywords:
additive manufacturing; composites; X-ray computed tomography; in-situ tensile testing
Available at various institutes of the ASCR
Fast continuous in-situ XCT of additively manufactured carbon fiber reinforced tensile test specimens
The reinforcement of fused filament fabricated (FFF) components with continuous fibers allows for high versatility in the design of mechanical properties for a specific application’s needs. However, ...
The influence of first CNN layer initialization on training convergence
Krejsa, Jiří; Věchet, Stanislav; Chen, K.S.
2023 - English
During evaluation of convolution neural networks on the task of sign language single hand alphabet classification we have discovered that in small but not negligible number of cases the training of the network does not converge at all. This paper investigates the problem that we believe is independent of the application. While the true cause of training divergence was not discovered, we can offer the reader an easy solution from practical point of view – initialization of the first CNN layer using pretrained networks parameters.
Keywords:
convolution neural networks; training; initialization
Available at various institutes of the ASCR
The influence of first CNN layer initialization on training convergence
During evaluation of convolution neural networks on the task of sign language single hand alphabet classification we have discovered that in small but not negligible number of cases the training of ...
Post-processing the results of the topology optimization with the level set technique
Ježek, Ondřej; Kopačka, Ján; Gabriel, Dušan
2023 - English
Topology optimization (TO) has come to the fore with the development of 3D printing. The most commonly used method is SIMP, a density-based approach, which outputs a per-element constant density field and thus requires post-processing to obtain the shape. Conventional post-processing methods extract optimized topologies in the form of brep models. It yields only C0 continuous geometries, which are usually not suitable for downstream applications such as prototyping, design validation, and design exploration. In this paper, we present a new post-processing method based on the level set principle that overcomes common post-processing issues, such as the lack of smoothness.
Keywords:
topology optimization; post-processing; level-set; signed distance function
Available at various institutes of the ASCR
Post-processing the results of the topology optimization with the level set technique
Topology optimization (TO) has come to the fore with the development of 3D printing. The most commonly used method is SIMP, a density-based approach, which outputs a per-element constant density field ...
Photo-active liquid crystalline materials: effect of lateral substitution far from the chiral center
Mironov, Sergei; Suchánek, T.; Marhoul, J.; Cigl, Martin; Hamplová, Věra; Bubnov, Alexej
2023 - English
Photosensitive liquid crystalline (LC) materials give a fascinating possibility to tune and control the optical properties of soft systems distantly by illumination by UV-Vis light. Lateral substitution on the molecular core is an effective tool to tune the behaviour of chiral LCs. The effect of lateral substitution (by F, Cl, Br and methyl group) on the self-assembling behaviour, several new LCs with substituents placed on the benzene ring far from the chiral centre are and studied. All compounds, with exception of Br-substituted one, possess the cholesteric phase. The photosensitive behaviour, in particular the conversion of the E-Z isomers, was studied in toluene solution by HPLC. The kinetics of the photo-isomerization was identified under illumination by UV light. Due to presence of a photo-active azo group these materials can be used as functional dopants for design of smart photo-active liquid crystalline mixtures targeted for various applications in optoelectronics.
Keywords:
photosensitive chiral liquid crystal; lateral substitution; azobenzene; E-Z isomerization
Available at various institutes of the ASCR
Photo-active liquid crystalline materials: effect of lateral substitution far from the chiral center
Photosensitive liquid crystalline (LC) materials give a fascinating possibility to tune and control the optical properties of soft systems distantly by illumination by UV-Vis light. Lateral ...
NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web
Send your suggestions and comments to nusl@techlib.cz
Provider
Other bases