Survey of the use of propane as refrigerant R290 in cooling circuits and heat pumps
Aminian, Ali; Prokopová, Olga; Vinš, Václav
2022 - English
The technical report presents a review on the application of propane as refrigerant R290 in cooling circuits and heat pumps (HVAC). Safety risks of R290 used in HVAC are addressed according to ANSI/ASHRAE and EN standards. Comparison of thermophysical properties of propane with other refrigerants, solubility and miscibility of propane in compressor oils and heat transfer in condenser and evaporator are discussed. The main aim of the study is to provide an overview about the potential use of propane in the cooling circuit and heat pump for the hydrogen bus developed by the SOR Libchavy company.
Keywords:
cooling circuit; heat pump; hydrogen bus; refrigerant
Available at various institutes of the ASCR
Survey of the use of propane as refrigerant R290 in cooling circuits and heat pumps
The technical report presents a review on the application of propane as refrigerant R290 in cooling circuits and heat pumps (HVAC). Safety risks of R290 used in HVAC are addressed according to ...
Identification of material constants of rubber damping segments by modal analysis for railway rubber-resilient wheels
Šulc, Petr; Šnábl, Pavel; Pešek, Luděk; Bula, Vítězslav
2022 - English
In this paper, an experimental and numerical modal analysis is described to assess two rubber compounds for the damping segments of a railway wheel. The subject of this comparison is materiál parameters such as Young’s modulus and loss factor for both compounds in the frequency range up to 6.5 kHz. From this comparison, an idea of the damping, stiffness and durability of these rubber segment materials inside these wheels is obtained.
Keywords:
modal analysis; rubber; railway wheel; damping segment
Available at various institutes of the ASCR
Identification of material constants of rubber damping segments by modal analysis for railway rubber-resilient wheels
In this paper, an experimental and numerical modal analysis is described to assess two rubber compounds for the damping segments of a railway wheel. The subject of this comparison is materiál ...
Měření fotokatalytické účinnosti nátěru fn nano®2 na modelu ulice Legerova
Nosek, Štěpán
2022 - Czech
Metodou fyzikálního modelování byl v aerodynamickém tunelu ÚT AV ČR v Novém Kníně úspěšně uskutečněn experiment simulující odbourávání zdraví nebezpečného polutantu (NOX) fotokatalýzou na povrchu ošetřeném aktivním nátěrem FN NANO®2 uvnitř modelu městského uličního kaňonu. Za kontrolovaných podmínek (stejný směr a střední rychlost nabíhajícího větru, neutrální stratifikace atmosféry) byl simulován případ znečištění modelu ulice Legerova nabíhající mezní vrstvou. Nabíhající mezní vrstva byla znečištěna koncentracemi NOX (tedy směsí NO a NO2) z automobilu.\nExperiment prokázal vyšší účinnost odbourávání NO (až 15 %) než NOX (max. 12 %), přičemž byla prokázána závislost účinnosti odbourávání na studované pozici. Nejnižší účinnosti bylo dosaženo v ulicích orientovaných paralelně s nabíhající mezní vrstvou. Tyto ulice jsou nicméně přirozeně lépe větrány. \n An experiment was conducted to test the effectiveness of the FN NANO®2 coating in removing a pollutant (NOX) by photocatalysis on a surface in a model of a real urban street canyon. The experiment was conducted in a wind tunnel under controlled conditions and simulated the case of pollution of a Legerova street model by an upwind boundary layer polluted by NOX concentrations from a car. The results showed that the coating has a higher degradation efficiency for NO (up to 15%) than for NOX (max. 12%), with the efficiency depending on the investigated position. The lowest efficiency was achieved in streets aligned parallel to the upwind boundary layer, which are naturally better ventilated.
Keywords:
photocatalysis; NOx; TiO2; street canyon; air purification; urban air pollution
Available at various institutes of the ASCR
Měření fotokatalytické účinnosti nátěru fn nano®2 na modelu ulice Legerova
Metodou fyzikálního modelování byl v aerodynamickém tunelu ÚT AV ČR v Novém Kníně úspěšně uskutečněn experiment simulující odbourávání zdraví nebezpečného polutantu (NOX) fotokatalýzou na povrchu ...
Autobusy s vodíkovým a elektrickým pohonem v České republice a ve světě (2000-2022)
Gruber, Jan; Bouška, Jindřich; Brtna, D.; Janovec, Jiří
2022 - Czech
Zpráva shrnuje údaje o využití vodíkových autobusů v České republice, zemích Evropské unie a částečně též ostatních zemích světa. Zahrnuje jak historické a již ukončené projekty, tak i projekty běžící a plánované v blízké budoucnosti. Zpráva popisuje, shrnuje a srovnává dostupné parametry těchto vodíkových autobusů, se zaměřením na autobusy využívané pro městskou hromadnou dopravu. Zpráva také pro srovnání obsahuje předběžné výsledky simulací spotřeby vodíkového autobusu v modelu vyvíjeném v rámci projektu ve výpočetním a simulačním prostředí MATLAB/Simulink. The report summarizes parameters of electrobuses and hydrogen buses in the Czech republic, in the EU and to same extent also in other countries. In includes both historical, already finished projects and current or planned projects in the near future. The report describes and compares available parameters of these hydrogen buses, focusing on the mass-transit city buses. The report also includes preliminary results of simulations of hydrogen bus consumption. These were simulated in the model being developed in MATLAB/Simulink environment.
Keywords:
bus; electrobus; fuel celll; hydrogen; mass transit
Available at various institutes of the ASCR
Autobusy s vodíkovým a elektrickým pohonem v České republice a ve světě (2000-2022)
Zpráva shrnuje údaje o využití vodíkových autobusů v České republice, zemích Evropské unie a částečně též ostatních zemích světa. Zahrnuje jak historické a již ukončené projekty, tak i projekty běžící ...
V6: Zpráva popisující funkční vzorek NEMENUS
Štefan, Jan; Joch, Jaroslav; Převorovský, Zdeněk; Gabriel, Dušan; Krofta, Josef; Chlada, Milan; Kober, Jan; Masák, Jan; Materna, A.; Kovářík, O.; Čech, J.
2022 - Czech
Výzkumná zpráva je součástí závazného výstupu V6: FUNKČNÍ VZOREK projektu TAČR TK01030108: Inovativní posuzování bezpečnosti jaderných elektráren na základě nových technologií SHM a návazných procedur - NEMENUS (NEw MEthods for NUclear Safety). Zpráva podává úplný technický popis sestrojeného reprezentativního funkčního vzorku, tedy „reprezentativního SHM modelu“, a popis procesu čtyřletého experimentálního vývoje RFV. This research report is an integral part of mandatory output V6: FUNCTIONAL SPECIMEN of project TAČR TK01030108: Innovative methods for nuclear plant safety evaluation based on SHM technologies and related procedures - NEMENUS (NEw MEthods for NUclear Safety). The report presents full technical description of the elaborated representative functional specimen (the representative SHM model) and the description of a four-year experimental program.
Keywords:
structural health monitoring; nondestructive testing; fatigue testing
Available at various institutes of the ASCR
V6: Zpráva popisující funkční vzorek NEMENUS
Výzkumná zpráva je součástí závazného výstupu V6: FUNKČNÍ VZOREK projektu TAČR TK01030108: Inovativní posuzování bezpečnosti jaderných elektráren na základě nových technologií SHM a návazných procedur ...
Ochranné obvody měničů PF
Hauptmann, R.; Kokeš, Petr
2022 - Czech
Zpráva obsahuje popis a výsledky simulací obvodů, které slouží jako ochrany proti poškození hlavního silového obvodu napájení vinutí PF (Poloidal Field) tokamaku v případě vzniku havarijních stavů. Za normálního provozního stavu ochranné obvody činnost silových obvodů neovlivňují. Ochranné obvody tvoří samostatný systém, který je funkčně nezávislý na obvodech měničů a jejích řízení. Charakter funkce tohoto systému je koncipován jako bezpečnostní obvod – závada ochranného systému vede vždy k bezpečnému odstavení zařízení. Description and results of numerical simulations of circuits, which provide damage protection of the main power supply circuit for tokamak PF (Poloidal Field) coils under emergency conditions, is presented. In case of normal operation the protection circuits do not affect operation of the power supply circuitry. The protection circuits represent a separate system which is functionally independent of circuits and control of power converters. Functinality of this system is designed as a safety circuit - a fault of the protection system always causes safety shut-down of the device.
Keywords:
tokamak; PF coils; power converter
Available at various institutes of the ASCR
Ochranné obvody měničů PF
Zpráva obsahuje popis a výsledky simulací obvodů, které slouží jako ochrany proti poškození hlavního silového obvodu napájení vinutí PF (Poloidal Field) tokamaku v případě vzniku havarijních stavů. Za ...
Measurement on Compressor Cascade KOBRA
Luxa, Martin; Šimurda, David
2022 - English
The report contains results and evaluation of conducted optical (shadowgraph and schlieren technique) and pneumatic measurements on the profile cascade intended for the tip section of the first rotor row compressor blade.
Keywords:
compressor cascade; transonic flow; optical measurement; pneumatic measurement
Available at various institutes of the ASCR
Measurement on Compressor Cascade KOBRA
The report contains results and evaluation of conducted optical (shadowgraph and schlieren technique) and pneumatic measurements on the profile cascade intended for the tip section of the first rotor ...
Two-way fluid structure interaction study of aero-engine compressor blade vibration under air excitation
Mekhalfia, Mohammed Lamine; Procházka, Pavel; Tchawou Tchuisseu, Eder Batista; Maturkanič, Dušan; Hodboď, Robert
2022 - English
In this paper, we provide a numerical method via FEM software (ANSYS) using two-way Fluid-Structure Interaction (FSI) solver to estimate the blade’s vibration where the force used to excitation is a continuous air jet. This will help to provide data to diagnostic blade condition and health monitoring and a bridge toward a precise study of the blade’s dynamic under rotation and the estimation of blade’s displacement to define the amplitude and the frequency that occurs under different types of excitation which is a pillar for the process of machine condition and health monitoring.
Keywords:
two-way fluid structure interaction (FSI); air excitation; blade tip displacement
Available at various institutes of the ASCR
Two-way fluid structure interaction study of aero-engine compressor blade vibration under air excitation
In this paper, we provide a numerical method via FEM software (ANSYS) using two-way Fluid-Structure Interaction (FSI) solver to estimate the blade’s vibration where the force used to excitation is a ...
The International Colloquium Dynamics of Machines and Mechanical Systems with Interactions, DYMAMESI 2022
Zolotarev, Igor; Pešek, Luděk; Kozień, M. S.
2022 - English
The papers of the DYMAMESI are divided into the three sections and focused on the Dynamics of Machines, Interactions and Power Engineering.
Keywords:
dynamics; vibrations of mechanical systems; vibrodiagnostics; energy transformations
Available at various institutes of the ASCR
The International Colloquium Dynamics of Machines and Mechanical Systems with Interactions, DYMAMESI 2022
The papers of the DYMAMESI are divided into the three sections and focused on the Dynamics of Machines, Interactions and Power Engineering.
Experimental and numerical evaluation of blade cascade instability using travelling wave mode approach
Chindada, Sony; Šnábl, Pavel; Pešek, Luděk
2022 - English
The stability of experimental blade cascade with five NACA 0010 profiles was measured and evaluated with travelling wave mode approach with three inner blades oscilating. The measured moment of the middle blade consist of not only the aerodynamic moment from the flow but also structural moment from the blade dynamics. Two days of obtaining the aerodynamic moment from the measured data are herein presented and the results compared. In addition, numercial simulations were done and the results from 2D CFD analysis in ANSYS are compared with the experimental data.
Keywords:
blade cascade instability; travelling wave mode approach; flutter
Available at various institutes of the ASCR
Experimental and numerical evaluation of blade cascade instability using travelling wave mode approach
The stability of experimental blade cascade with five NACA 0010 profiles was measured and evaluated with travelling wave mode approach with three inner blades oscilating. The measured moment of the ...
NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web
Send your suggestions and comments to nusl@techlib.cz
Provider
Other bases