Number of found documents: 371
Published from to

Porous composites based on siloxane resin for hard tissue replacements
Suchý, T.; Balík, Karel; Sochor, M.; Černý, Martin; Hulejová, H.; Pešáková, V.
2006 - English
A composite material based on polysiloxane and first on glass fabrics was prepared. The composite samples were prepared with controlled open porosity, the sizes of which were in the range: i) 0,2-0,4 mm, ii) 0,4-0,6 mm, and iii) >0,6 mm. For further improvement of osseointegration, a powder hydroxyapatite, particle size of 0,005 mm in the amount of 10 wgt %. The effects of surface treatment and hydroxyapatite matrix additives on osseointegration were studied by methods in vitro and in vivo. Keywords: composite material; glass fibers; hard tissue Available at various institutes of the ASCR
Porous composites based on siloxane resin for hard tissue replacements

A composite material based on polysiloxane and first on glass fabrics was prepared. The composite samples were prepared with controlled open porosity, the sizes of which were in the range: i) 0,2-0,4 ...

Suchý, T.; Balík, Karel; Sochor, M.; Černý, Martin; Hulejová, H.; Pešáková, V.
Ústav struktury a mechaniky hornin, 2006

Some surface improvement and osseointegration
Suchý, T.; Balík, Karel; Sedláček, R.; Sochor, M.
2006 - English
As a further perspective material to be used in orthopedics, glass fibers (R-glass, 21055 satin-woven fabric, VETROTEX, Saint Gobain, France) and polysiloxane matrix (M130, Lučební závody Kolín, Czech Republic) based composite materials have been investigated. Keywords: composite materials; glass fibers; osseointegration Available at various institutes of the ASCR
Some surface improvement and osseointegration

As a further perspective material to be used in orthopedics, glass fibers (R-glass, 21055 satin-woven fabric, VETROTEX, Saint Gobain, France) and polysiloxane matrix (M130, Lučební závody Kolín, Czech ...

Suchý, T.; Balík, Karel; Sedláček, R.; Sochor, M.
Ústav struktury a mechaniky hornin, 2006

Zpracování odpadní pryže s hnědým uhlím ko-zplyněním. Výzkumná zpráva k ověření technologie ko-zplynění
Straka, Pavel; Kříž, Vlastimil; Káš, Václav; Hanzlíček, Tomáš; Brožová, Zuzana
2006 - Czech
Pokus v provozním měřítku prokázal, že odpadní pryž lze zpracovat ko-zplyněním s hnědým uhlím. Experiment in industrial scale proved that waste rubber can be treated by co-gasification with brown coal. Keywords: waste; rubber; brown coal Available at various institutes of the ASCR
Zpracování odpadní pryže s hnědým uhlím ko-zplyněním. Výzkumná zpráva k ověření technologie ko-zplynění

Pokus v provozním měřítku prokázal, že odpadní pryž lze zpracovat ko-zplyněním s hnědým uhlím....

Straka, Pavel; Kříž, Vlastimil; Káš, Václav; Hanzlíček, Tomáš; Brožová, Zuzana
Ústav struktury a mechaniky hornin, 2006

Reakce v keramickém materiálu s minoritním obsahem uhlíku
Stoklasa, Jaroslav
2006 - Czech
Řeší se problematika přítomnosti zdánlivě bezvýznamných množství běžných příměsí organických látek v keramice. Solutions to problems of present relatively unimportant amount of ingredients of organic substances into ceramics are treated. Keywords: burning out; kinetics; physical chemistry process Available at various institutes of the ASCR
Reakce v keramickém materiálu s minoritním obsahem uhlíku

Řeší se problematika přítomnosti zdánlivě bezvýznamných množství běžných příměsí organických látek v keramice....

Stoklasa, Jaroslav
Ústav struktury a mechaniky hornin, 2006

Alternative utilization of organic wastes - their co-processing with coal
Kříž, Vlastimil; Bučko, Z.
2006 - English
Samples of brown coal mixed with real organic wastes were gasified in a laboratory model gasification unit, using steam and carbon dioxide for gasification. The co-gasification possibility of brown coal/waste tires mixtures at industrial scale was verified. Směsné vzorky hnědého uhlí s reálnými organickými odpady byly zplyňovány v laboratorní modelové zplyňovací jednotce pomocí vodní páry a oxidu uhličitého. Ověření možnosti společného zplynění hnědého uhlí a odpadní pryže. Keywords: gasification; coal; used tires Available at various institutes of the ASCR
Alternative utilization of organic wastes - their co-processing with coal

Samples of brown coal mixed with real organic wastes were gasified in a laboratory model gasification unit, using steam and carbon dioxide for gasification. The co-gasification possibility of brown ...

Kříž, Vlastimil; Bučko, Z.
Ústav struktury a mechaniky hornin, 2006

Permanentní GPS observatoře Ústavu struktury a mechaniky hornin AV ČR a využití jejich dat pro potřeby běžné geodetické práce
Schenk, Vladimír; Mantlík, František; Kottnauer, Pavel; Schenková, Zdeňka
2005 - Czech
ÚSMH provozuje 5 permanentních GPS observatoří, které registrují signály systému NAVSTAR a GLONASS. IRSM operates 5 GPS permanent observatories, that monitor signals of the systems NAVSTAR and GLONASS. Keywords: GPS; permanent observatories Available at various institutes of the ASCR
Permanentní GPS observatoře Ústavu struktury a mechaniky hornin AV ČR a využití jejich dat pro potřeby běžné geodetické práce

ÚSMH provozuje 5 permanentních GPS observatoří, které registrují signály systému NAVSTAR a GLONASS....

Schenk, Vladimír; Mantlík, František; Kottnauer, Pavel; Schenková, Zdeňka
Ústav struktury a mechaniky hornin, 2005

Preparation of waste rubber-geopolymer composite material
Skoba, O.; Bednařík, V.; Vondruška, M.; Slavík, R.; Hanzlíček, Tomáš
2005 - English
Study of the behavior of geopolymer composite with tyre- shreds (waste material of tread tyre production). Possibility of the futur use of new composite material. Studie chování geopolymerních kompozitů s obrusy gumy z pneumatik jako odpadového materiálu při protektorování automobilních plášťů. Možnosti dalšího využití takového kompoz. materiálu. Keywords: geopolymer; waste Available at various institutes of the ASCR
Preparation of waste rubber-geopolymer composite material

Study of the behavior of geopolymer composite with tyre- shreds (waste material of tread tyre production). Possibility of the futur use of new composite material....

Skoba, O.; Bednařík, V.; Vondruška, M.; Slavík, R.; Hanzlíček, Tomáš
Ústav struktury a mechaniky hornin, 2005

Stavba svahů ve středním povodí Losenice
Hartvich, Filip
2005 - Czech
Stavba, tvar a vývoj svahů jsou ovlivněny několika faktory. Jedná se o predispozici údolní soustavy tektonickými diskontinuitami a foliací, které jsou poté dotvářeny vnějšími geomorfologickými činiteli. According to results of the state-of-the-art research, the present shape of the slopes is a result of collaboration of several influences, particulary the structural and tectonical pre-disposition, which interacts with the surfacial geomorphological processes. Keywords: geomorphological research; slope movements; rock structure Available at various institutes of the ASCR
Stavba svahů ve středním povodí Losenice

Stavba, tvar a vývoj svahů jsou ovlivněny několika faktory. Jedná se o predispozici údolní soustavy tektonickými diskontinuitami a foliací, které jsou poté dotvářeny vnějšími geomorfologickými ...

Hartvich, Filip
Ústav struktury a mechaniky hornin, 2005

Co-carbonization coal/carbonaceous wastes mixtures
Kříž, Vlastimil; Brožová, Zuzana
2005 - English
Yields and properties comparison of carbonization products from coal/cotton, coal/waste tires and coal/mixed plastics mixtures. Porovnání výtěžků a vlastností produktů karbonizace směsí uhlí/bavlna, uhlí/odpadní pryž a uhlí/směsné plasty. Keywords: coal; co-carbonization; wastes Available at various institutes of the ASCR
Co-carbonization coal/carbonaceous wastes mixtures

Yields and properties comparison of carbonization products from coal/cotton, coal/waste tires and coal/mixed plastics mixtures....

Kříž, Vlastimil; Brožová, Zuzana
Ústav struktury a mechaniky hornin, 2005

Proces vyhořívání organických látek ze surového keramického střepu
Stoklasa, Jaroslav
2005 - Czech
Porovnány průběhy procesu vyhořívání v keramickém střepu s velmi malým a velkým množstvím vyhořívajících látek. Diskutována tvorba černých jader. Burning-out processes inside of ceramic body between very small quantity of burning-out substance and vast one are compared. Black cores formation is discused. Keywords: burning-out; advanced ceramics; physical chemistry process Available at various institutes of the ASCR
Proces vyhořívání organických látek ze surového keramického střepu

Porovnány průběhy procesu vyhořívání v keramickém střepu s velmi malým a velkým množstvím vyhořívajících látek. Diskutována tvorba černých jader....

Stoklasa, Jaroslav
Ústav struktury a mechaniky hornin, 2005

About project

NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web

Send your suggestions and comments to nusl@techlib.cz

Provider

http://www.techlib.cz

Facebook

Other bases