No (7633)
Number of found documents:
7633
Published from
to
Enhanced growth rate of diamond films at low temperature in focused microwave plasma system
Babčenko, Oleg; Bydžovská, Irena; Fait, Jan; Shagieva, Ekaterina; Ondič, Lukáš; Kromka, Alexander
2023 - English
The low temperature (< 500 °C) diamond film deposition on fused silica in two different focused microwave plasma systems, i.e. a multimode clamshell cavity (MCC) and a rotational ellipsoid cavity (REC) reactor, was investigated. During the experiments, the methane to hydrogen ratio, in the hydrogen-rich process gas mixture, varied from 1 % to 15 % for MCC and from 1 % to 9 % for REC. The grown films were analyzed by scanning electron microscopy and Raman shift measurements. The outcomes of the study and enhanced diamond growth at low temperatures is advantageous for overcoating of fused silica as well as thermally sensitive substrates, e.g. optical elements, photonic crystals, sensors, etc.
Keywords:
well-faceted diamonds; low temperature deposition; high growth rate; low non-diamond content; focused plasma
Available at various institutes of the ASCR
Enhanced growth rate of diamond films at low temperature in focused microwave plasma system
The low temperature (...
Self-balancing of vertical disc rotors supported by contactless bearings
Zapoměl, Jaroslav; Kozánek, Jan; Košina, Jan
2023 - English
Article discusses the self-balancing of the vertical disc rotors supported by contactless bearings on principle of diamagnetic levitation. There are three possibilities of contactless supports: permanent magnet levitation with the help of bismuth, graphite and pyrolitic graphite.
Keywords:
self balancing; vertical disc rotors; contactless bearings
Available at various institutes of the ASCR
Self-balancing of vertical disc rotors supported by contactless bearings
Article discusses the self-balancing of the vertical disc rotors supported by contactless bearings on principle of diamagnetic levitation. There are three possibilities of contactless supports: ...
Topical Problems of Fluid Mechanics 2023
Šimurda, David; Bodnár, T.
2023 - English
Proceedings contain collection of papers presented during the conference Topical Problems of Fluid Mechanics 2023. Majority of papers is concerned with numerical simulations covering wide range of applications in fluid mechanics.\n
Keywords:
experimental fluid mechanics; mathematical modelling; CFD; turbulence; stratified fluid; multiphase flow; vortex structures; supersonic flow
Available at various institutes of the ASCR
Topical Problems of Fluid Mechanics 2023
Proceedings contain collection of papers presented during the conference Topical Problems of Fluid Mechanics 2023. Majority of papers is concerned with numerical simulations covering wide range of ...
Damage detection study for a pedestrian cable-stayed bridge using ANSYS
Bayer, Jan; Kawulok, Marek; Urushadze, Shota
2023 - English
In connection to development of new testing techniques for bridges at ITAM, a theoretical damage detection case study was performed for a cable stayed bridge over the Vltava River at Lužec. The results recognise the most susceptible loading modes which should be identified exactly during the in-situ measurements.
Keywords:
cable stayed bridges; structural health monitoring; ANSYS
Available at various institutes of the ASCR
Damage detection study for a pedestrian cable-stayed bridge using ANSYS
In connection to development of new testing techniques for bridges at ITAM, a theoretical damage detection case study was performed for a cable stayed bridge over the Vltava River at Lužec. The ...
Technological challenges in the fabrication of MoS.sub.2./sub./diamond heterostructures
Varga, Marián; Sojková, M.; Hrdá, J.; Hutar, P.; Parsa Saeb, S.; Vanko, G.; Pribusova Slusna, L.; Ondič, Lukáš; Fait, Jan; Kromka, Alexander; Hulman, M.
2023 - English
Nowadays, 2D materials are one of the most studied classes of materials. In addition to the most famous graphene, progress has been achieved in studying and using fundamental properties of transition metal dichalcogenides (TMD). Complementary, diamond as a representative of 3D materials has gained a reputation as an extremely versatile material due to its extraordinary combination of physical/chemical/electrical/optical properties. Besides these particular forms of 2D and 3D materials, their heterostructures have become very attractive due to new phenomena and functions (bandgap engineering, enhanced charge transport, optical interaction, etc.). However, individual technological procedures are still minimally investigated and described. Here, we will demonstrate a proof-of-concept for the preparation of MoS2/diamond heterostructures, where two different strategies were employed: a) growth of MoS2 layers on diamond films, and b) growth of diamond films on Si/MoS2 substrates.
Keywords:
transition metal dichalcogenides; molybdenum disulfide; diamond; heterostructures
Available at various institutes of the ASCR
Technological challenges in the fabrication of MoS.sub.2./sub./diamond heterostructures
Nowadays, 2D materials are one of the most studied classes of materials. In addition to the most famous graphene, progress has been achieved in studying and using fundamental properties of transition ...
Effect of the long-term storage methods on the stability of cartilage biomechanical parameters
Žaloudková, Blanka; Sekorová, Š.; Kopecká, B.; Kytýř, Daniel
2023 - English
Long-term stability of the tissue product in terms of mechanical parameters is a key factor for its expiration date. For the investigation of storage effects on the cartilage tissues the experimental mechanical loading test combined with XCT scanning for the irregular shape inspection was performed. The samples were preserved according to three different protocols using the deep-freezing and two types of saline solution preservation. The stability of the biomechanical parameters was tested within annual intervals. All samples were subjected to uni-axial compression loading using the in-house developed compact table top loading device in displacement-driven mode. Based on the measurements, the results are represented in the form of stress-strain curves and quantified as elastic modulus and ultimate compression stress. It can be concluded that no significant difference was found in neither the mechanical properties of the samples nor in the effects of each preservational method.
Keywords:
stability study; cartilage; biomechanical characterisation; compression loading; XCT imaging
Available at various institutes of the ASCR
Effect of the long-term storage methods on the stability of cartilage biomechanical parameters
Long-term stability of the tissue product in terms of mechanical parameters is a key factor for its expiration date. For the investigation of storage effects on the cartilage tissues the experimental ...
Applications of blade vibration measurements in the laboratory of rotational laser vibrometry
Maturkanič, Dušan; Procházka, Pavel; Hodboď, Robert; Mekhalfia, Mohammed Lamine; Voronova, Evgeniya
2023 - English
The Laboratory of Rotational Laser Vibrometry was established at the Institute of Thermomechanics AS CR, v.v.i. in 2015 and the first experiments were started the following year. The measurements are intended for the research of vibration of rotating blades. The paper includes a summary of measurement results using a special turbine model and their consequences in theoretical research, as well as measurements with a real compressor of aircraft engine and comparison with computational analysis. The paper also describes the complex system for measurement and analysis.
Keywords:
laboratory; turbine; blade; vibration; precision method
Available at various institutes of the ASCR
Applications of blade vibration measurements in the laboratory of rotational laser vibrometry
The Laboratory of Rotational Laser Vibrometry was established at the Institute of Thermomechanics AS CR, v.v.i. in 2015 and the first experiments were started the following year. The measurements are ...
The effect of the backfill on the integrity of a buried pipeline upon heavy-duty vehicle crossings
Gajdoš, Lubomír; Šperl, Martin; Slížková, Zuzana; Drdlová, M.
2023 - English
The aim of this work was to determine stresses in the wall of a buried empty gas pipeline caused by the weight of backfill as well as by heavy-duty vehicles crossing the pipeline, and, on their basis to assess the applicability of protective sleeves. A buried pipeline with zero internal pressure of transported medium (empty pipeline) differs from an unburied pipeline by the vertical load due to the weight of the backfill which causes an ovalness of the circular cross section of the pipeline. This leads to the rise of through-wall bending stresses with the tensile stress at the outside surface at the 3 and 9 o´clock positions and compressive stress at the inside surface. At the 6 and 12 o´clock positions the stresses are tensile at the inside surface and compressive at the outside surface. The current depth of soil cover above gas pipelines is 0.5 m. For pipes DN500, t ~ 6.5 mm the through-wall bending stress is found to be σb ≈ ±10 MPa. In comparison with the yield stress of pipeline material, this stress is negligible. The situation is changed when heavy-duty vehicles cross the pipeline. For example, when a MAN truck with the mass load 3270 kg acting on a single wheel of the front axle crosses this pipeline, the pressure transmitted to the pipe will cause the through-wall bending stress σb ≈ ±76 MPa. This stress is superimposed to that of the backfill to give the total value ±86 MPa. When dead loads, imposed by backfill cover, together with live loads, caused by truck-wheel loads, are excessive a crushing of side walls of the pipeline and/or ring buckling of the pipe cross section can happen.
Keywords:
gas pipeline; pressure; buried pipeline
Available at various institutes of the ASCR
The effect of the backfill on the integrity of a buried pipeline upon heavy-duty vehicle crossings
The aim of this work was to determine stresses in the wall of a buried empty gas pipeline caused by the weight of backfill as well as by heavy-duty vehicles crossing the pipeline, and, on their basis ...
Experimental evaluation of aluminothermic welds
Zeman, L.; Valach, J.; Zlámal, P.; Krčmářová, N.; Koudelková, Veronika; Zeman, J.
2023 - English
The article presents a study of the mechanical processes occurring during the aluminother-mic reaction using experimental methods (strain gauges, digital image correlation, thermography,scanning electron microscopy, profilometry). The aluminothermic reaction is a highly efficient weldingmethod due to its exothermic behaviour, however, it places considerable demands not only on thewelding technique, but also on the capabilities of the experimental methods used - these limitationsare also discussed in the article. The aluminothermic reaction is associated with the formation of alocalised heat source with a time evolution dictated by the technological procedure, which manifestsitself in heat propagation to the surrounding weld material. The unequal evolution of the temperaturefield is the fundamental cause of the appearance of the heat affected zone or local deformations orsurface curvature, which was the focus of the experimental methods deployed above and the results ofwhich are shown in the article.
Keywords:
aluminothermic reaction; train gauges; hardness; profilometry; scanning electron microscope
Available at various institutes of the ASCR
Experimental evaluation of aluminothermic welds
The article presents a study of the mechanical processes occurring during the aluminother-mic reaction using experimental methods (strain gauges, digital image correlation, thermography,scanning ...
Acta Polytechnica CTU Proceedings. Vol. 42 (2023)
Kytýř, Daniel; Doktor, T.; Zlámal, Petr
2023 - English
The YSESM symposium provides a forum for young researchers and engineers, PhD students and students dealing with subjects of experimental mechanics. The Symposium concentrates on current work in all areas of experimental research and its application in solid and fluid mechanics. The topic will particularly concern to: Conventional and Advanced Experimental Methods in Solid and Fluid Mechanics, Non-Destructive Testing and Inspection, Measurements in Material Science, Computer Assisted Testing and Simulation, Engineering Design Simulation, Hybrid Methods, Experimental Techniques – Numerical Simulation, Optical Methods and Image Processing, Measurements in Biomechanics, Sensor Techniques for Micro- and Nano-Applications, Measurement Methods for Forensic Engineering.
Keywords:
experimental mechanics; fluid mechanics; mechanics of solids
Available at various institutes of the ASCR
Acta Polytechnica CTU Proceedings. Vol. 42 (2023)
The YSESM symposium provides a forum for young researchers and engineers, PhD students and students dealing with subjects of experimental mechanics. The Symposium concentrates on current work in all ...
NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web
Send your suggestions and comments to nusl@techlib.cz
Provider
Other bases