Number of found documents: 41
Published from to

On the X-ray micro-tomography measurements of biological samples under compressive loading
Fíla, T.; Kumpová, Ivana; Zlámal, Petr; Kytýř, Daniel; Koudelka_ml., Petr; Doktor, Tomáš; Jiroušek, Ondřej
2014 - English
In this paper, compact loading device for micro-CT measurements under applied load was used in a series of instrumented compressive test of bone sample. Tested bone samples were loaded in several deformation steps and micro-CT scanning was carried out in each step. Reconstructed three-dimensional data of intact bone sample were used to develop 3D model of the specimen. Data from each deformation step were processed by DVC method for identification of displacement and strain fields and thus for evaluation of deformation response of human trabecular bone sample. Keywords: micro-tomography; trabecular bone; compressive test; medical imaging; finite element modelling Fulltext is available at external website.
On the X-ray micro-tomography measurements of biological samples under compressive loading

In this paper, compact loading device for micro-CT measurements under applied load was used in a series of instrumented compressive test of bone sample. Tested bone samples were loaded in several ...

Fíla, T.; Kumpová, Ivana; Zlámal, Petr; Kytýř, Daniel; Koudelka_ml., Petr; Doktor, Tomáš; Jiroušek, Ondřej
Ústav teoretické a aplikované mechaniky, 2014

Calibration of an image processing tool for analysis of fibre orientation in fibre reinforced composites
Hos, J.; Doktor, T.; Petráňová, Veronika; Kytýř, Daniel
2014 - English
This paper deals with calculation of fibre orientation distribution (FOD) in fibre reinforced composite. The calculation was based on image analysis algorithm applied on image acquired by scanning electron microscope. A composite with oriented fibres was selected to be enable calibration of the algorithm by comparison of the obtained results with FOD declared by the manufacturer. Keywords: C/PPS; fibre orientation; SEM; composite Fulltext is available at external website.
Calibration of an image processing tool for analysis of fibre orientation in fibre reinforced composites

This paper deals with calculation of fibre orientation distribution (FOD) in fibre reinforced composite. The calculation was based on image analysis algorithm applied on image acquired by scanning ...

Hos, J.; Doktor, T.; Petráňová, Veronika; Kytýř, Daniel
Ústav teoretické a aplikované mechaniky, 2014

New devices for diagnostics of historical structures
Hasníková, Hana; Kloiber, Michal; Zíma, Pavel
2014 - English
Two new devices developed at ITAM AS CR for non-destructive testing of materials, especially from historical structures, are presented below. So called microtube is a semi-automatic portable tool for water absorption measurements. The natural stones, mortars and other porous materials can be measured and it is very useful to assess the efficiency of various hydrophobic treatments used within the restoration also. The diagnostic device for in-situ assessment of timber enables direct determination of conventional compressive strength and modulus of deformation in arbitrary depth along timber profile. The semi-destructive method causes a very gentle damage on the structural members. Keywords: historical structures; water absorption measurement; timber assessment Fulltext is available at external website.
New devices for diagnostics of historical structures

Two new devices developed at ITAM AS CR for non-destructive testing of materials, especially from historical structures, are presented below. So called microtube is a semi-automatic portable tool for ...

Hasníková, Hana; Kloiber, Michal; Zíma, Pavel
Ústav teoretické a aplikované mechaniky, 2014

On the modelling of compressive response of closed-cell aluminium foams under high-strain rate loading
Koudelka_ml., P.; Zlámal, Petr; Fíla, Tomáš
2014 - English
Porous metals and particularly aluminium foams are attractive materials for crash applications where constructional elements have to be able to absorb considerable amount of deformation energy while having as low weight as possible. Compressive behaviour for medium impact velocities can be experimentally assessed from a series of droptower impact tests instrumented with accelerometer and high-speed camera. However to predict such behaviour a proper modelling scheme has to be developed. In this paper droptower impact tests of Alporas aluminium foam were used for development of a material model for explicit finite element simulations of high-strain rate deformation process using LS-DYNA simulation environment. From the material models available low density foam, Fu-Chang’s foam, crushable foam and modified crushable foam models were selected for simulations using smoothed-particle hydrodynamics and solid formulations respectively. Numerical simulations were performed in order to assess constitutive parameters of these models and identify material model describing deformation behaviour of Alporas with the best accuracy. Keywords: aluminium foam; high strain-rate compression; finite element modelling Fulltext is available at external website.
On the modelling of compressive response of closed-cell aluminium foams under high-strain rate loading

Porous metals and particularly aluminium foams are attractive materials for crash applications where constructional elements have to be able to absorb considerable amount of deformation energy while ...

Koudelka_ml., P.; Zlámal, Petr; Fíla, Tomáš
Ústav teoretické a aplikované mechaniky, 2014

Semiautomatic Surface Reflectance Measurement for Monitoring of Material Weathering
Kocour, Vladimír; Valach, Jaroslav
2014 - English
We present a device for measurement of surface reflectance in dependence on incidence angle and reflectance angle. This measurement enables us to quantitatively determine how much the surface is glossy or matt. The device is programmable, which enables us to choose non-equidistant steps of angles, and study special situations more in detail. It can be used for monitoring of material weathering or other types of degradation as weathering usually causes that the surface becomes more matt. Keywords: surface; reflectance; photometry Fulltext is available at external website.
Semiautomatic Surface Reflectance Measurement for Monitoring of Material Weathering

We present a device for measurement of surface reflectance in dependence on incidence angle and reflectance angle. This measurement enables us to quantitatively determine how much the surface is ...

Kocour, Vladimír; Valach, Jaroslav
Ústav teoretické a aplikované mechaniky, 2014

Post-critical multi-modal vibration of a continuous inverse pendulum type system
Náprstek, Jiří; Fischer, Cyril
2014 - English
Auto-parametric effects are processes endangering structures during a seismic attack. Tall structures exposed to a strong vertical component of an earthquake excitation nearby the epicenter can collapse due to auto-parametric resonance effect. Vertical and horizontal response components being independent in the linear regime get into a complex interaction due to non-linear terms in post-critical regime. Two generally different types of the post-critical regimes are presented: (i) post-critical state with possible recovery; (ii) exponentially rising horizontal response leading to a collapse. A special attention is paid to processes of transition from semi-trivial to post-critical state in case of time limited excitation period as it concerns the seismic processes. Solution method combining analytical and numerical approaches is developed and used. Its applicability and shortcomings are commented. A few hints for engineering applications are given. Keywords: auto-parametric systems; dynamic stability; semi-trivial solution; multi-modal vibration Available in digital repository of the ASCR
Post-critical multi-modal vibration of a continuous inverse pendulum type system

Auto-parametric effects are processes endangering structures during a seismic attack. Tall structures exposed to a strong vertical component of an earthquake excitation nearby the epicenter can ...

Náprstek, Jiří; Fischer, Cyril
Ústav teoretické a aplikované mechaniky, 2014

Investigation of deformation behaviour of aluminium foam under high-strain rate loading and comparison with conventional energy absorbing material
Zlámal, P.; Fíla, Tomáš; Jiroušek, O.; Králík, V.
2014 - English
The aim of this study is proper description of stress-strain behaviour of the metal foam structure Alporas under high-strain rate loading. Stress-strain response of Alporas specimens is measured during an impact test using a drop tower experiment. Strain of the specimens is evaluated by two independent approaches: i) double numerical integration of acceleration data and ii) digital image correlation technique. Thus, experimental setup is equipped with triaxial accelerometer and high speed camera. Resulting stress-strain curves are compared with behaviour of polystyrene material samples (polystyrene material is commonly used as a shock absorber) obtained from the same testing procedure and with stress-strain function determined from Alporas quasi-static compression testing. Keywords: digital image correlation; impact test; polystyrene; metal foam Fulltext is available at external website.
Investigation of deformation behaviour of aluminium foam under high-strain rate loading and comparison with conventional energy absorbing material

The aim of this study is proper description of stress-strain behaviour of the metal foam structure Alporas under high-strain rate loading. Stress-strain response of Alporas specimens is measured ...

Zlámal, P.; Fíla, Tomáš; Jiroušek, O.; Králík, V.
Ústav teoretické a aplikované mechaniky, 2014

Determination of drift distortion in SEM micrographs acquired at different magnifications and acquisition times
Petráňová, Veronika; Koudelka_ml., Petr; Valach, Jaroslav
2014 - English
In the experimental mechanics wide variety of optical methods including measurement of deformation at reduced length scales using combination of computer vision and scanning electron microscopy (SEM) have been recently applied. One of suitable methods for in-plane measurement of displacements and deformations in the micrographs obtained by SEM is the 2D digital image correlation. In contrast to images obtained in visible spectrum by classical optical devices temporally-varying distortions known as drift distortion are present in the SEM micrographs. These distortions are caused by positional errors of electron beam during scanning process. Magnitude of this effect decreases with higher conductivity of the sample and is also influenced by magnification and scanning time. For this purpose measurement of distortion was performed on a series of micrographs of conductive samples acquired at different magnifications and acquisition times. Surface of each sample was covered with liquid silver to ensure adequate contrast pattern necessary for determination of distortion’s magnitude and distortion magnitudes were assessed. Keywords: scanning electron microscopy; digital image correlation; drift distortion Fulltext is available at external website.
Determination of drift distortion in SEM micrographs acquired at different magnifications and acquisition times

In the experimental mechanics wide variety of optical methods including measurement of deformation at reduced length scales using combination of computer vision and scanning electron microscopy ...

Petráňová, Veronika; Koudelka_ml., Petr; Valach, Jaroslav
Ústav teoretické a aplikované mechaniky, 2014

Experimental study of tile grout material behavior
Kumpová, Ivana; Kloiber, Michal; Ševčík, Radek; Kytýř, Daniel
2014 - English
Study provides preliminary results of experimental study of tile grout material behavior. Experiments were performed with the use of microCT, three point bending test and methods for chemical analysis. It was proven that material behave very elastic and the suitability of the combination of used methods. Keywords: grout; three point bending test; microtomography; X-ray diffraction; FTIR Fulltext is available at external website.
Experimental study of tile grout material behavior

Study provides preliminary results of experimental study of tile grout material behavior. Experiments were performed with the use of microCT, three point bending test and methods for chemical ...

Kumpová, Ivana; Kloiber, Michal; Ševčík, Radek; Kytýř, Daniel
Ústav teoretické a aplikované mechaniky, 2014

Aeroelastic divergence modeled by means of the stochastic resonance
Náprstek, Jiří; Pospíšil, Stanislav
2014 - English
The divergence is one of the most important and dangerous phenomenon of aeroelastic post-critical states occurring at a prismatic slender beam in a cross-flow. This phenomenon manifests by stable periodic hopping between two nearly constant limits perturbed by random noises. Experimental observation and numerical simulation motivates an idea to model this process as the effect of the stochastic resonance. Being observed and practically used in a number of disciplines in physics (optics, plasma physics, atd.) its mathematical basis follows in the most simple case from properties of the Duffing equation with negative linear part of the stiffness. The occurrence of this phenomenon depends on certain combinations of input parameters, which can be determined theoretically and verified experimentally in the wind tunnel. Keywords: stochastic resonance; interwell hopping; non-linear vibration; aeroelastic divergence Available in digital repository of the ASCR
Aeroelastic divergence modeled by means of the stochastic resonance

The divergence is one of the most important and dangerous phenomenon of aeroelastic post-critical states occurring at a prismatic slender beam in a cross-flow. This phenomenon manifests by stable ...

Náprstek, Jiří; Pospíšil, Stanislav
Ústav teoretické a aplikované mechaniky, 2014

About project

NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web

Send your suggestions and comments to nusl@techlib.cz

Provider

http://www.techlib.cz

Facebook

Other bases