Modification of cooling system for laboratory measurement of rotor blade vibration
Maturkanič, Dušan; Procházka, Pavel; Hodboď, Robert; Voronova, Evgeniya; Mekhalfia, Mohammed Lamine
2024 - English
Last year, the replacement of the turbine wheel model was completed in the Laboratory of Rotational Laser Vibrometry of the Institute of Thermomechanics AS CR, v.v.i. Based on previous experience and the expected higher operating load planned for the new wheel, the cooling system was modified at the same time. The paper describes the main effort in this direction and the results that clarify the previous damage of the measuring device.
Keywords:
blade; vibration; cooling system; measurement; laboratory
Available at various institutes of the ASCR
Modification of cooling system for laboratory measurement of rotor blade vibration
Last year, the replacement of the turbine wheel model was completed in the Laboratory of Rotational Laser Vibrometry of the Institute of Thermomechanics AS CR, v.v.i. Based on previous experience and ...
DYNAMICS OF MACHINES AND MECHANICAL SYSTEMS WITH INTERACTIONS : PROCEEDINGS DYMAMESI 2024
Zolotarev, Igor; Pešek, Luděk; Kozień, M. S.
2024 - English
The aim of the DYMAMESI is to facilitate the exchange of up to date information and knowledge among specialists in structural and multibody dynamics, in coupled interacting systems as aero-elasticity, hydro-elasticity, biomechanics, systems with feedbacks and mechatronics. In 2023 will be hosted by Cracow University of Technology, Institute of Applied Mechanics, Section of Dynamics of Systems.
Keywords:
dynamics; vibrations of mechanical systems; vibrodiagnostics; energy transformations
Available at various institutes of the ASCR
DYNAMICS OF MACHINES AND MECHANICAL SYSTEMS WITH INTERACTIONS : PROCEEDINGS DYMAMESI 2024
The aim of the DYMAMESI is to facilitate the exchange of up to date information and knowledge among specialists in structural and multibody dynamics, in coupled interacting systems as aero-elasticity, ...
Stochastic version of the arc-length method
Náprstek, Jiří; Fischer, Cyril
2024 - English
The solution of a nonlinear algebraic system using the incremental method, based on pre-defined loading steps, fails in the vicinity of local extrema as well as around bifurcation points. The solution involved the derivation of the so-called ’Arc-Length’ method. Its essence lies in not incrementing the system parameter or any of the independent variables but rather the length of the response curve. The stochastic variant of this method allows for working with a system where system parameters include random imperfections. This contribution presents a variant that tracks the first two stochastic moments. Even in this simple case, interesting phenomena can be observed, such as the disappearance of the energy barrier against equilibrium jump due to random imperfections in the system.
Keywords:
random imperfection; stochastic arc-length method; continuation; numerical method
Available in digital repository of the ASCR
Stochastic version of the arc-length method
The solution of a nonlinear algebraic system using the incremental method, based on pre-defined loading steps, fails in the vicinity of local extrema as well as around bifurcation points. The solution ...
Acoustic emission methods in steel bridge degradation identification and monitoring
Šorm, Filip
2024 - English
Acoustic emission methods proved to be an effective diagnostic tool in many industrial sectors. The potential of this method in the field of steel bridge diagnostics is explored in this article. The goal is to find the most effective use of this method.
Keywords:
steel bridges; diagnostics; acoustic emission
Available in digital repository of the ASCR
Acoustic emission methods in steel bridge degradation identification and monitoring
Acoustic emission methods proved to be an effective diagnostic tool in many industrial sectors. The potential of this method in the field of steel bridge diagnostics is explored in this article. The ...
Some modifications of the limited-memory variable metric optimization methods
Vlček, Jan; Lukšan, Ladislav
2023 - English
Several modifications of the limited-memory variable metric (or quasi-Newton) line search methods for large scale unconstrained optimization are investigated. First the block version of the symmetric rank-one (SR1) update formula is derived in a similar way as for the block BFGS update in Vlˇcek and Lukˇsan (Numerical Algorithms 2019). The block SR1 formula is then modified to obtain an update which can reduce the required number of arithmetic operations per iteration. Since it usually violates the corresponding secant conditions, this update is combined with the shifting investigated in Vlˇcek and Lukˇsan (J. Comput. Appl. Math. 2006). Moreover, a new efficient way how to realize the limited-memory shifted BFGS method is proposed. For a class of methods based on the generalized shifted economy BFGS update, global convergence is established. A numerical comparison with the standard L-BFGS and BNS methods is given.
Keywords:
unconstrained minimization; variable metric methods; limited-memory methods; variationally derived methods; arithmetic operations reduction; global convergence
Available in a digital repository NRGL
Some modifications of the limited-memory variable metric optimization methods
Several modifications of the limited-memory variable metric (or quasi-Newton) line search methods for large scale unconstrained optimization are investigated. First the block version of the symmetric ...
GA 19-07635S: Outputs and Results
Rehák, Branislav
2023 - English
This manuscript aims to deliver a survey of results obtained during the solution of the project No. GA19-07635S of the Czech Science Foundation. The timespan dedicated to the work on this project was 1.3.2019 - 30.6.2022. The main area dealt with were\nnonlinear multi-agent systems and their synchronization, further, attention was paid to some auxiliary results in the area of nonlinear observers. This Report briefly introduces the Project, provides a summary of the results obtained and also sketches an outline how these results will be applied and extended in future.
Keywords:
multi-agent systems; nonlinear multi-agent systems; synchronization
Fulltext is available at external website.
GA 19-07635S: Outputs and Results
This manuscript aims to deliver a survey of results obtained during the solution of the project No. GA19-07635S of the Czech Science Foundation. The timespan dedicated to the work on this project was ...
Dynamics of Machines and Mechanical Systems with Interactions, DYMAMESI 2023
Zolotarev, Igor; Pešek, Luděk; Kozień, M. S.
2023 - English
The aim of the DYMAMESI is to facilitate the exchange of up to date information and knowledge among specialists in structural and multibody dynamics, in coupled interacting systems as aero-elasticity, hydro-elasticity, biomechanics, systems with feedbacks and mechatronics. The colloquium DYMAMESI 2021 is cofunded by the Strategy AV21 initiative of the Czech Academy of Sciences of the Czech Republic, and in 2021 will be hosted by Cracow University of Technology, Institute of Applied Mechanics, Section of Dynamics of Systems.
Keywords:
dynamics; vibrations of mechanical systems; vibrodiagnostics; energy transformations
Available at various institutes of the ASCR
Dynamics of Machines and Mechanical Systems with Interactions, DYMAMESI 2023
The aim of the DYMAMESI is to facilitate the exchange of up to date information and knowledge among specialists in structural and multibody dynamics, in coupled interacting systems as aero-elasticity, ...
On the structure and values of betweenness centrality in dense betweenness-uniform graphs
Ghanbari, B.; Hartman, David; Jelínek, V.; Pokorná, Aneta; Šámal, R.; Valtr, P.
2023 - English
Betweenness centrality is a network centrality measure based on the amount of shortest paths passing through a given vertex. A graph is betweenness-uniform (BUG)if all vertices have an equal value of betweenness centrality. In this contribution, we focus on betweenness-uniform graphs with betweenness centrality below one. We disprove a conjecture about the existence of a BUG with betweenness value α for any rational numberαfrom the interval (3/4,∞) by showing that only very few betweenness centrality values below 6/7 are attained for at least one BUG. Furthermore, among graphs with diameter at least three, there are no betweenness-uniform graphs with a betweenness centrality smaller than one. In graphs of smaller diameter, the same can be shown under a uniformity condition on the components of the complement.
Keywords:
betweenness; graphs
Available in digital repository of the ASCR
On the structure and values of betweenness centrality in dense betweenness-uniform graphs
Betweenness centrality is a network centrality measure based on the amount of shortest paths passing through a given vertex. A graph is betweenness-uniform (BUG)if all vertices have an equal value of ...
Adaptation of methods for cyclo-stationary processes for noisy structural health data
Fischer, Cyril; Bayer, Jan; Náprstek, Jiří; Urushadze, Shota
2023 - English
In structural health analysis, various techniques, including indirect measurement via monitoring vehicles, often yield data with significant randomness and insufficient frequency separation. Conversely, the desired attributes under scrutiny are periodic in nature. Thus, methodologies designed to identify cyclo-stationary properties within noisy data can be adapted for such scenarios, assuming an adequate length of the recorded data.
Keywords:
data analysis; cyclo-stationary processes; structural health monitoring
Available at various institutes of the ASCR
Adaptation of methods for cyclo-stationary processes for noisy structural health data
In structural health analysis, various techniques, including indirect measurement via monitoring vehicles, often yield data with significant randomness and insufficient frequency separation. ...
Consistency of mathematical and experimental model of the autoparametric system
Fischer, Cyril; Náprstek, Jiří
2023 - English
This paper presents a long-overdue comparison of data obtained from experimental investigation of a spherical vibration absorber with the results of two mathematical models of the motion of a heavy sphere in a spherical surface. It shows that the danger posed by the potentially unstable self-parametric nature of the mathematical system is not too great in the case of realistic configurations, and that the values of the parameters describing the realistic structures remain within intervals corresponding to the stable behaviour of the absorber.
Keywords:
vibration absorber; rolling sphere; spherical surface; autoparametric system; structural health monitoring
Available at various institutes of the ASCR
Consistency of mathematical and experimental model of the autoparametric system
This paper presents a long-overdue comparison of data obtained from experimental investigation of a spherical vibration absorber with the results of two mathematical models of the motion of a heavy ...
NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web
Send your suggestions and comments to nusl@techlib.cz
Provider
Other bases