Ne (11867)
Ano (2896)
Počet nalezených dokumentů:
14763
Publikováno od
do
Functional Tungsten-based thin films and their characterization
Košelová, Zuzana; Horáková, L.; Sobola, Dinara; Burda, Daniel; Knápek, Alexandr; Fohlerová, Z.
2024 - anglický
Anodizing is a technique by which thin oxide layers can be formed on a surface. Thin oxide layers have been found to be useful in a variety of applications, including emitters of electrons. Tungsten is still a common choice for cold field emitters in commercial microscopy applications. Its suitable quality can be further improved by thin film deposition. Not only the emission characteristic can be improved, but also the emitter operating time can be extended. Tungsten oxide is known for its excellent resistance to corrosion and chemical attack due to its stable crystal structure and strong chemical bonds between tungsten and oxygen atoms. Many techniques with different advantages and disadvantages have been used for this purpose. Anodization was chosen for this work because of the controllable uniform coverage of the material and its easy availability without the need for expensive complex equipment. The anodizing process involves applying an electrical potential to tungsten while it is immersed in an electrolyte solution. This creates a thin layer of tungsten oxide on the surface of the metal. The thickness and properties of the resulting oxide layer can be controlled by adjusting the anodization conditions, such as the electrolyte solution, voltage, and the duration of the process. In this work, H3PO4 was used as the electrolyte to test whether these tungsten oxide layers would be useful for electron emitters, for use in electron guns and other devices that require high-quality electron emitters. The properties were evaluated using appropriate techniques. In general, anodization of tungsten to form thin layers of tungsten oxide layers is a promising technique for producing high quality electron emitters.
Klíčová slova:
cold-field emission; thin layer deposition; tungsten oxide; resonance enhanced tunneling; anodization
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Functional Tungsten-based thin films and their characterization
Anodizing is a technique by which thin oxide layers can be formed on a surface. Thin oxide layers have been found to be useful in a variety of applications, including emitters of electrons. Tungsten ...
Survey expectations, adaptive learning and inflation dynamics
Rychalovska, Y.; Slobodyan, Sergey; Wouters, R.
2024 - anglický
The use of survey information on inflation expectations as an observable in a DSGE model can substantially refine identification of the shocks that drive inflation. Optimal integration of the survey information improves the model forecast for inflation and for other macroeconomic variables. Models with expectations based on an Adaptive Learning setup can exploit survey information more efficiently than their Rational Expectations counterparts. The resulting time-variation in the perceived inflation target, in inflation persistence, and in the sensitivity of inflation to various shocks provide a rich and consistent description of the joint dynamics of realized and expected inflation. Our framework produces a reasonable interpretation of the post-Covid inflation dynamics. Our learning model successfully identifies the more persistent nature of the recent inflation surge.
Klíčová slova:
inflation; expectations; survey data
Dokument je dostupný na externích webových stránkách.
Survey expectations, adaptive learning and inflation dynamics
The use of survey information on inflation expectations as an observable in a DSGE model can substantially refine identification of the shocks that drive inflation. Optimal integration of the survey ...
The American origin of the French Revolution
Ottinger, Sebastian; Rosenberger, L.
2024 - anglický
We show that the French combatants’ exposure to the United States increased support for the French Revolution a decade later. French regions from which more American combatants originated had more revolts against feudal institutions, revolutionary societies, volunteers for the revolutionary army, and emigrants from the Old Regime’s elite. To establish causality, we exploit two historical coincidences: i) originally, a French army of seven and a half thousand was ready to sail, but one-third did not, ii) among those deployed, only some regiments were stationed in New England. Only combatants exposed to New England affected the French Revolution after their return.
Klíčová slova:
institutional change; French Revolution; American War of Independence
Dokument je dostupný na externích webových stránkách.
The American origin of the French Revolution
We show that the French combatants’ exposure to the United States increased support for the French Revolution a decade later. French regions from which more American combatants originated had more ...
COVID-19 and political preferences through stages of the pandemic: the case of the Czech Republic
Bičáková, Alena; Jurajda, Štěpán
2024 - anglický
We track the effects of the COVID-19 pandemic on political preferences through ‘high’ and ‘low’ phases of the pandemic. We ask about the effects of the health and the economic costs of the pandemic measured at both personal and municipality levels. Consistent with the literature, we estimate effects suggestive of political accountability of leaders during ‘high’ pandemic phases. However, we also find that the pandemic political accountability effects are mostly short-lived, and do not extend to the first post-pandemic elections.
Klíčová slova:
COVID-19; political preferences; election outcomes
Dokument je dostupný na externích webových stránkách.
COVID-19 and political preferences through stages of the pandemic: the case of the Czech Republic
We track the effects of the COVID-19 pandemic on political preferences through ‘high’ and ‘low’ phases of the pandemic. We ask about the effects of the health and the economic costs of the pandemic ...
Flow simulations approach for flocculation tanks
Idžakovičová, Kristýna; Bílek, Vojtěch; Haidl, Jan; Isoz, M.; Pivokonský, Martin
2024 - anglický
Flocculation in water treatment facilities plays a key role in the separation of colloidal inorganic and organic substances. Its optimization leads to a significant increase in its efficiency and savings of operational costs. However, it is currently based on trial-and-error experimental approaches. In this contribution, we focus on flow modeling in stirred flocculation tanks that would, after coupling with a calibrated model of particle aggregation, enable simulationbased flocculation optimization. Despite the abundance of literature on stirred tank modeling, there is no universal agreement on the methodology used to describe turbulence nor on the approach to the computational mesh creation. Consequently, there is no unified methodology for simulations and their validation. To address this, we present a best-practice methodology for economical, yet reliable flow simulations in the said device. This methodology includes the choice of the turbulence model, the approach to the design of a high quality mesh suitable for arbitrary geometries, and results evaluation. It is developed based on an extensive literature review, a multitude of flow simulations using several meshes of progressively higher quality and resolution, and various strategies to converge to steady-state flow conditions. The simulation quality indicators used here involve comparison with the experimental data on fluid velocity, stirrer power output, and flow rate through the impeller zone. Additionally, the resulting flow simulation models are compared using tracer transport simulations, hinting at their potential for coupling with particle aggregation models.
Klíčová slova:
flocculation tank; stirring; MRF; CFD; OpenFOAM
Plné texty jsou dostupné v digitálním repozitáři Akademie Věd.
Flow simulations approach for flocculation tanks
Flocculation in water treatment facilities plays a key role in the separation of colloidal inorganic and organic substances. Its optimization leads to a significant increase in its efficiency and ...
Galloping of insulated bundled overhead line - nonlinear numerical analysis in time domain
Macháček, Michael; Hračov, Stanislav
2024 - anglický
Our contribution focuses on a 3D numerical nonlinear analysis of galloping in a specific bundled overhead line with ice accretion. We studied the susceptibility to this self-excited oscillation, critical onset wind speeds, and global dynamic response of a very low-tensioned line with simulated icing observed on similar real conductors. Due to the highly nonlinear mechanical behavior of such a flexible cable, we employed the Newmark integration method combined with the iterative Newton-Raphson method. We analyzed two numerical models of the overhead line loaded by the wind: one assuming nonlinearity only in the wind load, while retaining the linearity of the mechanical system itself, and the other representing a fully nonlinear system including geometrical nonlinearity. Our analysis revealed that the determined critical wind speeds for the onset of galloping are in relatively close ranges for both models. However, numerical simulations with the fully nonlinear system indicated significantly lower amplitudes of limit cycle oscillations, especially at higher wind speeds, compared to the linear model of the line. This underscores the necessity of using fully nonlinear models during the design stage of such low-tensioned aerial conductors.
Klíčová slova:
aerial bundled conductors; wind effects; galloping; limit cycle oscillation
Plné texty jsou dostupné v digitálním repozitáři Akademie Věd.
Galloping of insulated bundled overhead line - nonlinear numerical analysis in time domain
Our contribution focuses on a 3D numerical nonlinear analysis of galloping in a specific bundled overhead line with ice accretion. We studied the susceptibility to this self-excited oscillation, ...
Numerical study of the steady airflow in the human respiratory system during inhaling and exhaling
Lancmanová, Anna; Bodnár, Tomáš
2024 - anglický
This paper presents some of the initial results of the numerical simulations of a steady turbulent flow in human upper airways during inhalation and exhalation. The mathematical model is based on the system of Reynolds-Averaged incompressible Navier-Stokes equations complemented by the SST k − ω turbulence model. The simulations were performed using finite-volume open source solver OpenFOAM on a realistic three-dimensional geometry. The main aim of this particular study is to verify the computational setup with special focus on appropriate choice and implementation of boundary conditions. The prescribed boundary conditions are chosen to mimic the physiological conditions during normal breathing cycle. This study aims to gain an insight into the airflow behavior during the inhalation and exhalation process by comparing the results of two distinct simulations corresponding to two different (opposite) flow rates . The obtained local flow rates and flow fields for both cases are presented and mutually compared. This initial work should serve as a foundation for future more complex simulations that will include the time-dependent and compressible effects.
Klíčová slova:
human airways; incompressible Navier-Stokes; OpenFOAM
Plné texty jsou dostupné v digitálním repozitáři Akademie Věd.
Numerical study of the steady airflow in the human respiratory system during inhaling and exhaling
This paper presents some of the initial results of the numerical simulations of a steady turbulent flow in human upper airways during inhalation and exhalation. The mathematical model is based on the ...
Verification of the dynamic properties of a new model turbine wheel with free blades
Voronova, Evgeniya; Procházka, Pavel; Maturkanič, Dušan; Mekhalfia, Mohammed Lamine; Hodboď, Robert
2024 - anglický
The paper describes a new experimental model of turbine wheel with free blades. Verification tests were carried out using a Doppler laser vibrometer, with a focus on the equipment parameters under various conditions. The measurements were performed in the Laboratory of Rotational Laser Vibrometry originated at the Institute of Thermomechanics AS CR, v.v.i.
Klíčová slova:
natural frequencies; vibration; blade; laser; turbine
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Verification of the dynamic properties of a new model turbine wheel with free blades
The paper describes a new experimental model of turbine wheel with free blades. Verification tests were carried out using a Doppler laser vibrometer, with a focus on the equipment parameters under ...
Matching to suppliers in the production network: an empirical framework
Alfaro-Ureña, A.; Zacchia, Paolo
2024 - anglický
This paper develops a framework for the empirical analysis of the determinants of input supplier choice on the extensive margin using firm-to-firm transaction data. Building on a theoretical model of production network formation, we characterize the assumptions that enable a transformation of the multinomial logit likelihood function from which the seller fixed effects, which encode the seller marginal costs, vanish. This transformation conditions, for each subnetwork restricted to one supplier industry, on the out-degree of sellers (a sufficient statistic for the seller fixed effect) and the in-degree of buyers (which is pinned down by technology and by “make-or-buy” decisions). This approach delivers a consistent estimator for the effect of dyadic explanatory variables, which in our model are interpreted as matching frictions, on the supplier choice probability. The estimator is easy to implement and in Monte Carlo simulations it outperforms alternatives based on group fixed effects. In an empirical application about the effect of a major Costa Rican infrastructural project on firm-to-firm connections, our approach yields estimates typically much smaller in magnitude than those from naive multinomial logit.
Klíčová slova:
production network; supplier choice; conditional logit
Dokument je dostupný na externích webových stránkách.
Matching to suppliers in the production network: an empirical framework
This paper develops a framework for the empirical analysis of the determinants of input supplier choice on the extensive margin using firm-to-firm transaction data. Building on a theoretical model of ...
Disappearing stepping stones: technological change and career paths
Kashkarov, Daniil; Artemev, V.
2024 - anglický
Which career paths lead workers towards high-skilled non-routine cognitive occupations? Using PSID data, we show that, for a significant share of workers, a career path towards non-routine cognitive occupations goes through middle-skilled routine occupations, with the majority going through a subset of routine cognitive occupations. We then argue that the decline in employment in routine cognitive occupations due to routine-biased technological change can negatively affect the chances of younger cohorts joining high-skilled occupations. To test this hypothesis, we develop a structural occupational choice model that endogenously generates realistic career paths and estimate it using PSID data and job ad data from three major US outlets covering the period from 1940 to 2000. Our estimations suggest that, on average, 6% of workers ending up in non-routine cognitive occupations use routine cognitive occupations as stepping stones that allow them to maintain and accumulate human capital and experience relevant for later employment in high-skilled occupations. A fall in employment opportunities in routine cognitive occupations over the period of the most intensive routine-biased technological change led to at least 1.37 million lost high-skilled workers who got stuck in less skilled occupations.
Klíčová slova:
routine-biased technological change; occupational choice; human capital
Dokument je dostupný na externích webových stránkách.
Disappearing stepping stones: technological change and career paths
Which career paths lead workers towards high-skilled non-routine cognitive occupations? Using PSID data, we show that, for a significant share of workers, a career path towards non-routine cognitive ...
NUŠL poskytuje centrální přístup k informacím o šedé literatuře vznikající v ČR v oblastech vědy, výzkumu a vzdělávání. Více informací o šedé literatuře a NUŠL najdete na webu služby.
Vaše náměty a připomínky posílejte na email nusl@techlib.cz
Provozovatel
Zahraniční báze