Ne (11867)
Počet nalezených dokumentů:
11867
Publikováno od
do
Caves in Bohemia et Moravia Subterranea by Mauritius Vogt (1669–1730)
Rychnová, L.; Vokurka, Michal
2023 - anglický
The Manuscript Bohemia et Moravia Subterranea (1729) by Mauritius Vogt reflects the subterranean landscapes and underground spaces based on Athanasius Kircher’s theories. The paper analyses the application of Kirchers’s terminology to the natural phenomena from Bohemia and Moravia. Further, we focused on how Vogt worked with his sources – how far he relied on literature, correspondence, or personal experience.
Klíčová slova:
Mauritius Vogt; caves; subterranean; underground; early modern period
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Caves in Bohemia et Moravia Subterranea by Mauritius Vogt (1669–1730)
The Manuscript Bohemia et Moravia Subterranea (1729) by Mauritius Vogt reflects the subterranean landscapes and underground spaces based on Athanasius Kircher’s theories. The paper analyses the ...
Statistical Approach for BTT probes distribution
Mekhalfia, Mohammed Lamine; Procházka, Pavel; Šmíd, R.; Tchawou Tchuisseu, Eder Batista
2023 - anglický
Blade tip timing (BTT) system is a non-invasive method used for measuring the blade tip timing of rotating machinery. The BTT system typically consists of sensor probes, signal conditioning system, and data acquisition unit. The sensor probes are placed in proximity to the rotating blade tips, Sensors measure the time at which each blade passes by the probe. By measuring the blade tip timing, the BTT system can detect changes in the blade tip vibration, which is an important for the health monitoring and performance optimization of rotating machinery [1]. To ensure accurate measurement of blade tip timing, the probe arrangement is crucial. The placement of the probe relative to the blade tips can affect the measurement accuracy, and thus, several arrangement algorithms have been developed to optimize the placement of the probes. Instead of considering the condition number, a statistical algorithms is followed to optimize the placement of probes for accurate measurement of blade tip timing in turbo-machinery. The statistical approach will be employed to determine the optimal locations for probes, with the aim of reducing errors in the measurement of blade tip timing. \n
Klíčová slova:
blade tip timing principle; RMSE; blade´s dynamics
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Statistical Approach for BTT probes distribution
Blade tip timing (BTT) system is a non-invasive method used for measuring the blade tip timing of rotating machinery. The BTT system typically consists of sensor probes, signal conditioning system, ...
The design of Bayesian diagnostic expert system Querix and it’s engineering application
Věchet, Stanislav; Krejsa, Jiří; Chen, K.-S.
2023 - anglický
Expert systems have gained attention over the last two decades as they bring the possibility of using expert knowledge in various control systems. However, it has lost attraction in favor of artificial neural networks in recent years, which is mostly influenced by the availability of data to train neural network models and the availability of various frameworks to achieve fast time-to-market applications for given solutions.
Klíčová slova:
expert system; decision making; advanced diagnostic; autonomous navigation; RPA
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
The design of Bayesian diagnostic expert system Querix and it’s engineering application
Expert systems have gained attention over the last two decades as they bring the possibility of using expert knowledge in various control systems. However, it has lost attraction in favor of ...
Optimization of the outflow regime in Římov reservoir from the point of view of water supply
Mercado, Ma. Cristina Paule; Hejzlar, Josef; Jarošík, Jiří; Porcal, Petr
2023 - anglický
The best management strategy for the Římov reservoir: (a) discharge from a depth of 3–5 m during the stratified season, (b) without support for SHP and with high reservoir filling, (c) reducing the phosphorus loading of the reservoir as much as possible. The impacts of climate change on water quality are significant, as inflow DOC and P concentrations here increase with temperature and flow variability. The effects of climate change can be mitigated by targeted management of the reservoir, but the quality of water inflow will still deteriorate further.
Klíčová slova:
water; dissolved organic matter; reservoir
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Optimization of the outflow regime in Římov reservoir from the point of view of water supply
The best management strategy for the Římov reservoir: (a) discharge from a depth of 3–5 m during the stratified season, (b) without support for SHP and with high reservoir filling, (c) reducing the ...
Novel embedding resins for 3D-SEM II
Šlouf, Miroslav; Pavlova, Ewa; Strachota, Beata; Strachota, Adam; Nebesářová, Jana; Týč, Jiří; Krzyžánek, Vladislav; Skoupý, Radim
2023 - anglický
Research report for Thermo Fisher Scientific s. r. o., based on common project awarded by TA CR (program: National center of competence, TN01000008).
Klíčová slova:
novel embedding resins; 3D-SEM microscopy; higher e-beam resistance
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Novel embedding resins for 3D-SEM II
Research report for Thermo Fisher Scientific s. r. o., based on common project awarded by TA CR (program: National center of competence, TN01000008).
An Enzymatic Biosensor with Amperometric Detection in a Flow Injection Analysis for the Determination of L-lactic Acid: Development and Application
Tvorynska, Sofiia; Barek, J.; Josypčuk, Bohdan
2023 - anglický
An amperometric biosensor consisting of an enzymatic mini-reactor (lactate oxidase covalently\nattached to −NH2 functionalized mesoporous silica powder SBA−15 using glutaraldehyde) and\na silver amalgam-based screen-printed electrode acting as a transducer was developed for the\ndetermination of L-lactic acid (LA) in FIA. The detection potential of −0.9 V vs. Ag pseudoreference\nelectrode was applied for cathodic detection of enzymatically consumed oxygen.\nUnder the optimized conditions, the constructed biosensor enabled selective determination of\nLA with a micromolar limit of detection. Importantly, the proposed biosensor represented\nexcellent operational stability after ≥350 measurements. Finally, it was successfully applied to\nreal sample analysis.
Klíčová slova:
L-lactic acid; Lactate oxidase; Amperometric biosensor; silver amalgam
Plné texty jsou dostupné na vyžádání prostřednictvím repozitáře Akademie věd.
An Enzymatic Biosensor with Amperometric Detection in a Flow Injection Analysis for the Determination of L-lactic Acid: Development and Application
An amperometric biosensor consisting of an enzymatic mini-reactor (lactate oxidase covalently\nattached to −NH2 functionalized mesoporous silica powder SBA−15 using glutaraldehyde) and\na silver ...
Identification of quasiperiodic processes in the vicinity of the resonance
Fischer, Cyril; Náprstek, Jiří
2023 - anglický
In nonlinear dynamical systems, strong quasiperiodic beating effects appear due to combination of self-excited and forced vibration. The presence of symmetric or asymmetric beatings indicates an exchange of energy between individual degrees of freedom of the model or by multiple close dominant frequencies. This effect is illustrated by the case of the van der Pol equation in the vicinity of resonance. The approximate analysis of these nonlinear effects uses the harmonic balance method and the multiple scale method.
Klíčová slova:
dynamical systems; quasiperiodic response; van der Pol equation
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Identification of quasiperiodic processes in the vicinity of the resonance
In nonlinear dynamical systems, strong quasiperiodic beating effects appear due to combination of self-excited and forced vibration. The presence of symmetric or asymmetric beatings indicates an ...
Laboratory X-ray imaging in material sciences
Koudelka_ml., Petr; Kytýř, Daniel; Jiroušek, O.
2023 - anglický
In recent decades, X-ray imaging and computed (micro)tomography (XCT) in particular have become common tools for volumetric inspection, visualization, and analysis of internal structure in materials from various fields [1]. In this lecture, we will explore various applications of laboratory X-ray imaging chains utilizing the combination of tomographical imaging with mechanical, thermal, or chemical loading of the irradiated sample in a so-called time-resolved imaging allowing for unprecedented insight into different phenomena driving fundamental processes encountered in various fields of material science. We will show that failure processes in engineering or geological materials [2] can be thoroughly studied by synergy of information from radiographical imaging and other methods including acoustic emission detection and optical measurements via high-speed visible-spectrum and thermal-imaging cameras, where the radiography provides important spatial information regarding deformation processes evolving within the tested samples that could not be obtained otherwise. The state-of-the-art the laboratory based imaging chains for investigation of dynamic response of materials under loading will be also discussed including high speed X-ray radiography utilizing a powerful X-ray source during high velocity impact as an approach suitable for inspection of an impacted sample. As an alternative to both conventional high-power sources and accelerator facilities, capabilities of a flash X-ray system developed primarily for in-situ ballistics research providing very short bursts of an extremely powerful intermittent X-ray radiation with a typical duration of dozens of nanoseconds will be shown.
Klíčová slova:
X-ray imaging; material characterization; mechanical properties
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Laboratory X-ray imaging in material sciences
In recent decades, X-ray imaging and computed (micro)tomography (XCT) in particular have become common tools for volumetric inspection, visualization, and analysis of internal structure in materials ...
Aerodynamic Measurements on Subsonic Compressor Blade Cascades KR-D-7 and KR-D-8
Šimurda, David; Hála, Jindřich; Luxa, Martin; Radnic, Tomáš
2023 - anglický
This report contains results and evaluation of aerodynamic measurements conducted on two variant subsonic compressor blade cascades with MCA profile (KR-D-7) and DCA profile (KR-D-8) at transonic flow regimes.
Klíčová slova:
compressor blade cascade; experiment; transonic flow; subsonic flow; MCA profile; DCA profile
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Aerodynamic Measurements on Subsonic Compressor Blade Cascades KR-D-7 and KR-D-8
This report contains results and evaluation of aerodynamic measurements conducted on two variant subsonic compressor blade cascades with MCA profile (KR-D-7) and DCA profile (KR-D-8) at transonic flow ...
Aerodynamic Measurements on Transonic Compressor Blade Cascades KR-D-9 and KR-D-10
Šimurda, David; Hála, Jindřich; Luxa, Martin
2023 - anglický
This report contains results and evaluation of aerodynamic measurements conducted on two variant transonic compressor blade cascades with MCA profile (KR-D-10) and DCA profile (KR-D-9) at transonic flow regimes.
Klíčová slova:
compressor blade cascade; experiment; transonic flow; MCA profile; DCA profile
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Aerodynamic Measurements on Transonic Compressor Blade Cascades KR-D-9 and KR-D-10
This report contains results and evaluation of aerodynamic measurements conducted on two variant transonic compressor blade cascades with MCA profile (KR-D-10) and DCA profile (KR-D-9) at transonic ...
NUŠL poskytuje centrální přístup k informacím o šedé literatuře vznikající v ČR v oblastech vědy, výzkumu a vzdělávání. Více informací o šedé literatuře a NUŠL najdete na webu služby.
Vaše náměty a připomínky posílejte na email nusl@techlib.cz
Provozovatel
Zahraniční báze