Number of found documents: 3820
Published from to

2TDK Railway, profile P18. Datings. Final Report.
Bosák, Pavel; Zupan Hajna, N.; Hercman, H.; Horáček, I.; Kdýr, Šimon; Kogovšek, B.
2023 - English
Samples for datings were taken in the railway construction (2TDK) near village of Divača, Classical Karst on October 12, 2021: (1) vertebrate bones in cave 2TDK – 002 at the profile P18, cave entrance appeared during the construction operations on cleaned karst surface in a wall of karst depression. Samples of mammal bones and gastropods were collected in situ on cave bottom, and (2) pieces of speleothems occurring in non in situ position on artificially planated surface near the cave opening were collected. U-series: no numerical date was obtained as geochemistry of sample indicate open system, probably due to recrystallization of sample in soil cover. Paleomagnetism: The transition of N- and R-polarized samples cannot be identified more precisely as U-series radiometric dating yielded no numerical results. The transition easily can represent Brunhes/Matuyama boundary (at 773 ka) as well as any of older such transitions (e. g., base of Jaramillo, base of Olduvai). In any case the speleothem grew in a closed cave space with roof, probably as flowstone (inclusion of red soils above the base) and later as baldachin on eroded allogenic fill of the paleocave. Vertebrate paleontology: bone remains of small and larger vertebrates represent subrecent to Holocene species. Sorex alpinus represents the species quite rare in fossil record, but recetly limited to variegated woodland habitats with high surface humidity. A chamois Rupicapra rupicapra represents a resident species present in Slovenia throughout all stages of a glacial cycle, recently restricted to mountain habitats. Keywords: Divača Karst; unroofed cave; speleothem; U-Th dating; paleomagnetism; zoopaleontology Available at various institutes of the ASCR
2TDK Railway, profile P18. Datings. Final Report.

Samples for datings were taken in the railway construction (2TDK) near village of Divača, Classical Karst on October 12, 2021: (1) vertebrate bones in cave 2TDK – 002 at the profile P18, cave entrance ...

Bosák, Pavel; Zupan Hajna, N.; Hercman, H.; Horáček, I.; Kdýr, Šimon; Kogovšek, B.
Geologický ústav, 2023

Analýza malty z 19. století
Bauerová, Pavla; Frankeová, Dita; Slížková, Zuzana; Vondráčková, Michaela
2023 - Czech
Chemické a mineralogické složení pojiva a plniva malty pomocí elektronové mikroskopie (SEM-EDS) a termické analýzy Chemical and mineralogical composition of the binder and the aggregates of the mortar, using SEM-EDS and thermal analysis Keywords: SEM-EDS analysis; historic mortar; hydraulic lime; decalcification; carbonatization Available at various institutes of the ASCR
Analýza malty z 19. století

Chemické a mineralogické složení pojiva a plniva malty pomocí elektronové mikroskopie (SEM-EDS) a termické analýzy...

Bauerová, Pavla; Frankeová, Dita; Slížková, Zuzana; Vondráčková, Michaela
Ústav teoretické a aplikované mechaniky, 2023

Dynamická zkouška dvojice zavěšených lávek pro pěší a cyklisty v oblasti Dolních Vítkovic
Hračov, Stanislav; Urushadze, Shota; Macháček, Michael
2023 - Czech
Zpráva popisuje postup provedení a výsledky dynamické zatěžovací zkoušky dvojice lávek pro pěší v Ostravě. Zjištěné modální vlastnosti skutečných konstrukcí jsou porovnány s výsledky teoretické modální analýzy jejich numerických modelů. Úroveň vibrací mostovek obou lávek od přechodů chodců a běžců je poté posouzena s ohledem na jejich pohodlí a zdraví. The report describes the procedure and results of the dynamic loading test carried out at a pair of footbridges in Ostrava. The determined modal properties of the real structures are compared with the results of the theoretical modal analysis of their numerical models. The levels of the vibrations of the decks originated from pedestrians and runners are assessed with respect to their comfort and health. Keywords: footbridge; dynamic loading test; pedestrian load; vibration comfort criteria; tuned mass dampers Available at various institutes of the ASCR
Dynamická zkouška dvojice zavěšených lávek pro pěší a cyklisty v oblasti Dolních Vítkovic

Zpráva popisuje postup provedení a výsledky dynamické zatěžovací zkoušky dvojice lávek pro pěší v Ostravě. Zjištěné modální vlastnosti skutečných konstrukcí jsou porovnány s výsledky teoretické ...

Hračov, Stanislav; Urushadze, Shota; Macháček, Michael
Ústav teoretické a aplikované mechaniky, 2023

Some modifications of the limited-memory variable metric optimization methods
Vlček, Jan; Lukšan, Ladislav
2023 - English
Several modifications of the limited-memory variable metric (or quasi-Newton) line search methods for large scale unconstrained optimization are investigated. First the block version of the symmetric rank-one (SR1) update formula is derived in a similar way as for the block BFGS update in Vlˇcek and Lukˇsan (Numerical Algorithms 2019). The block SR1 formula is then modified to obtain an update which can reduce the required number of arithmetic operations per iteration. Since it usually violates the corresponding secant conditions, this update is combined with the shifting investigated in Vlˇcek and Lukˇsan (J. Comput. Appl. Math. 2006). Moreover, a new efficient way how to realize the limited-memory shifted BFGS method is proposed. For a class of methods based on the generalized shifted economy BFGS update, global convergence is established. A numerical comparison with the standard L-BFGS and BNS methods is given. Keywords: unconstrained minimization; variable metric methods; limited-memory methods; variationally derived methods; arithmetic operations reduction; global convergence Available in a digital repository NRGL
Some modifications of the limited-memory variable metric optimization methods

Several modifications of the limited-memory variable metric (or quasi-Newton) line search methods for large scale unconstrained optimization are investigated. First the block version of the symmetric ...

Vlček, Jan; Lukšan, Ladislav
Ústav informatiky, 2023

SMV-2023-30: ILA compact
Hrabina, Jan; Holá, Miroslava; Oulehla, Jindřich; Pokorný, Pavel; Lazar, Josef; Šarlejová, Tatiana; Šlechtický, Stanislav
2023 - Czech
Smluvní výzkum byl zaměřen na vývoj reference optického kmitočtů pro frekvenční stabilizaci kompaktních laserových zdrojů. Tato optická reference je založena na bázi absorpční kyvety plněných čistými plyny a dovoluje stabilizaci laserových zdrojů pomocí metod laserové spektroskopie. Kyveta je určena k použití jako reference optických kmitočtů laserové normály pracující v pásmu vlnových délek 532-633 nm. The contractual research was oriented towards the development of optical frequency reference intended for the frequency stabilisation of ultra-compact semiconductor laser sources. This optical reference is based on an absorption cell filled with ultra-pure absorption gases, and it allows precise locking of the lasers with laser spectroscopy methods. The cell will serve as a reference of optical frequencies in systems of laser standards (532-633 nm wavelengths). Keywords: absorption cell; iodine cell; laser spectroscopy; stabilised laser; frequency stability Available at various institutes of the ASCR
SMV-2023-30: ILA compact

Smluvní výzkum byl zaměřen na vývoj reference optického kmitočtů pro frekvenční stabilizaci kompaktních laserových zdrojů. Tato optická reference je založena na bázi absorpční kyvety plněných čistými ...

Hrabina, Jan; Holá, Miroslava; Oulehla, Jindřich; Pokorný, Pavel; Lazar, Josef; Šarlejová, Tatiana; Šlechtický, Stanislav
Ústav přístrojové techniky, 2023

SMV-2023-34: ULM2023
Hrabina, Jan; Holá, Miroslava; Oulehla, Jindřich; Pokorný, Pavel; Lazar, Josef; Šarlejová, Tatiana; Šlechtický, Stanislav
2023 - Czech
Smluvní výzkum byl zaměřen na vývoj reference optického kmitočtů pro frekvenční stabilizaci kompaktních laserových zdrojů. Tato optická reference je založena na bázi absorpční kyvety plněných čistými plyny a dovoluje stabilizaci laserových zdrojů pomocí metod laserové spektroskopie. Kyveta je určena k použití jako reference optických kmitočtů laserové normály pracující v pásmu vlnových délek 532-633 nm. The contractual research was oriented towards the development of optical frequency reference intended for the frequency stabilisation of ultra-compact semiconductor laser sources. This optical reference is based on an absorption cell filled with ultra-pure absorption gases, and it allows precise locking of the lasers with laser spectroscopy methods. The cell will serve as a reference of optical frequencies in systems of laser standards (532-633 nm wavelengths). Keywords: absorption cell; iodine cell; laser spectroscopy; stabilised laser; frequency stability Available at various institutes of the ASCR
SMV-2023-34: ULM2023

Smluvní výzkum byl zaměřen na vývoj reference optického kmitočtů pro frekvenční stabilizaci kompaktních laserových zdrojů. Tato optická reference je založena na bázi absorpční kyvety plněných čistými ...

Hrabina, Jan; Holá, Miroslava; Oulehla, Jindřich; Pokorný, Pavel; Lazar, Josef; Šarlejová, Tatiana; Šlechtický, Stanislav
Ústav přístrojové techniky, 2023

SMV-2023-35: NIM Víceprůchod
Hrabina, Jan; Holá, Miroslava; Oulehla, Jindřich; Pokorný, Pavel; Lazar, Josef; Šarlejová, Tatiana; Šlechtický, Stanislav
2023 - Czech
Smluvní výzkum byl zaměřen na vývoj referencí optických kmitočtů pro frekvenční stabilizaci kompaktních laserových zdrojů. Tyto optické reference jsou založeny na bázi absorpčních kyvet plněných čistými plyny a dovolují stabilizaci laserových zdrojů pomocí metod laserové spektroskopie. Kyvety jsou určené k použití jako reference optických kmitočtů pro laserové normály pracující v pásmu vlnových délek 532 nm. The contractual research was oriented towards the development of optical frequency references intended for the frequency stabilisation of ultra-compact laser sources. These optical references are based on absorption cells filled with ultra-pure absorption gases and they allow precise locking of the lasers with the methods of laser spectroscopy. The cells will serve as the references of optical frequencies in systems of laser standards (532 nm wavelengths). Keywords: absorption cell; iodine cell; laser spectroscopy; stabilised laser; frequency stability Available at various institutes of the ASCR
SMV-2023-35: NIM Víceprůchod

Smluvní výzkum byl zaměřen na vývoj referencí optických kmitočtů pro frekvenční stabilizaci kompaktních laserových zdrojů. Tyto optické reference jsou založeny na bázi absorpčních kyvet plněných ...

Hrabina, Jan; Holá, Miroslava; Oulehla, Jindřich; Pokorný, Pavel; Lazar, Josef; Šarlejová, Tatiana; Šlechtický, Stanislav
Ústav přístrojové techniky, 2023

SMV-2023-36: Wuhan Space
Hrabina, Jan; Holá, Miroslava; Oulehla, Jindřich; Pokorný, Pavel; Lazar, Josef; Šarlejová, Tatiana; Šlechtický, Stanislav
2023 - Czech
Smluvní výzkum byl zaměřen na vývoj reference optického kmitočtů pro frekvenční stabilizaci kompaktních laserových zdrojů. Tato optická reference je založena na bázi absorpční kyvety plněných čistými plyny a dovoluje stabilizaci laserových zdrojů pomocí metod laserové spektroskopie. Kyveta je určena k použití jako reference optických kmitočtů laserové normály pracující v pásmu vlnových délek 532-633 nm. The contractual research was oriented towards the development of optical frequency reference intended for the frequency stabilisation of ultra-compact semiconductor laser sources. This optical reference is based on an absorption cell filled with ultra-pure absorption gases, and it allows precise locking of the lasers with laser spectroscopy methods. The cell will serve as a reference of optical frequencies in systems of laser standards (532-633 nm wavelengths). Keywords: absorption cell; iodine cell; laser spectroscopy; stabilised laser; frequency stability Available at various institutes of the ASCR
SMV-2023-36: Wuhan Space

Smluvní výzkum byl zaměřen na vývoj reference optického kmitočtů pro frekvenční stabilizaci kompaktních laserových zdrojů. Tato optická reference je založena na bázi absorpční kyvety plněných čistými ...

Hrabina, Jan; Holá, Miroslava; Oulehla, Jindřich; Pokorný, Pavel; Lazar, Josef; Šarlejová, Tatiana; Šlechtický, Stanislav
Ústav přístrojové techniky, 2023

SMV‐2023‐01: Reliéfní struktury na principu diftraktivní optiky
Horáček, Miroslav; Kolařík, Vladimír; Matějka, Milan; Krátký, Stanislav; Chlumská, Jana; Meluzín, Petr; Král, Stanislav
2023 - Czech
Výzkum a vývoj v oblasti fyzikální realizace grafických a optických struktur na principu difraktivní optiky prostředky elektronové litografie v záznamovém materiálu neseném křemíkovou nebo skleněnou deskou. Výzkum zahrnuje analýzu grafického resp. optického motivu, výzkum a aplikaci reliéfních struktur realizujících požadované grafické resp. optické vlastnosti, výzkum a modelování možností fyzikální realizace reliéfních struktur, vypracování a analýzu technologie realizace reliéfní struktury s ohledem na limity současných vědeckých přístrojů, ověření teoretických úvah expozicí vzorku reliéfní struktury. Research and development in the field of physical realization of graphic and optical structures based on the principle of diffractive optics by means of electron beam lithography in a recording material supported by a silicon or glass board. The research covers the analysis of the graphical or optical motive, research and application of relief structures implementing the required graphic and optical properties, research and modeling of the physical possibilities of implementation of relief structures, preparation and analysis of technology of implementation of relief structures with regard to the limits of current scientific instruments, verification of theoretical considerations by means of relief structure sample exposure. Keywords: diffractive optical structures; relief structure; e-beam lithography Available at various institutes of the ASCR
SMV‐2023‐01: Reliéfní struktury na principu diftraktivní optiky

Výzkum a vývoj v oblasti fyzikální realizace grafických a optických struktur na principu difraktivní optiky prostředky elektronové litografie v záznamovém materiálu neseném křemíkovou nebo skleněnou ...

Horáček, Miroslav; Kolařík, Vladimír; Matějka, Milan; Krátký, Stanislav; Chlumská, Jana; Meluzín, Petr; Král, Stanislav
Ústav přístrojové techniky, 2023

SMV-2023-37: Projekt CRYSA - kryostat sondy 2
Frolec, Jiří
2023 - Czech
Cílem celého projektu CRYSA je výběr a testování tří kompozitních materiálů vhodných pro uchycení zařízení na velmi nízké teplotě (kryostatu), jež bude součástí chystané vesmírné sondy Athena od Evropské kosmické agentury (ESA). Na projektu spolupracuje skupina Kryogeniky a supravodivosti z Ústavu přístrojové techniky (ÚPT), firmy OHB Czechspace, 5M s.r.o. a Ústav fyziky materiálů AV ČR. Uvedené smluvní výzkumy se v r. 2023 v ÚPT zaměřily na dílčí cíle projektu. Konkrétně byl finalizován výběr tří nejlepších materiálů, které budou v budoucnu testovány, byly vypracovány detailní postupy pro plánované měření tepelných vodivostí vzorků a metoda jejich teplotního cyklování za nízkých teplot. Pracovníky skupiny Kryogenika a supravodivost byla také provedena optimalizace měřící aparatury a změřeny tepelné vodivosti několika cvičných vzorků. Výstupy tohoto projektu pomohou ESA s výběrem optimálního materiálu pro konstrukci závěsů uvedeného kryostatu pro dalekohled Athena. The goal of the project CRYSA is the selection and testing of three composite materials suitable for fixation of a low temperature device (cryostat), which will be part of the upcoming Athena space probe from the European Space Agency (ESA). The Cryogenics and Superconductivity group at the Institute of Scientific Instruments of the Czech Academy of Sciences (ISI Brno), OHB Czechspace, 5M s.r.o. and the Institute of Physics of Materials of the CAS (IPM) collaborate on this project. The aforementioned contractual researches carried out at ISI Brno in 2023 were focused on the partial goals of the project. Specifically, the selection of the three best materials, which will be tested in the future, was finalized. Further, detailed procedures for the planned measurements of the thermal conductivity of the samples and the method of their temperature cycling at low temperatures were developed. The members of the Cryogenics and Superconductivity Group also performed optimization of the measuring devices and measured thermal conductivities of several dummy samples. The outputs of this project will help ESA with the selection of the optimal material for the construction of the mechanical supports for the cryostat in the Athena telescope. Keywords: thermal conductivity; cryogenics; space probe; Athena Available at various institutes of the ASCR
SMV-2023-37: Projekt CRYSA - kryostat sondy 2

Cílem celého projektu CRYSA je výběr a testování tří kompozitních materiálů vhodných pro uchycení zařízení na velmi nízké teplotě (kryostatu), jež bude součástí chystané vesmírné sondy Athena od ...

Frolec, Jiří
Ústav přístrojové techniky, 2023

About project

NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web

Send your suggestions and comments to nusl@techlib.cz

Provider

http://www.techlib.cz

Facebook

Other bases