Ne (7622)
Počet nalezených dokumentů:
7622
Publikováno od
do
Adaptation of methods for cyclo-stationary processes for noisy structural health data
Fischer, Cyril; Bayer, Jan; Náprstek, Jiří; Urushadze, Shota
2023 - anglický
In structural health analysis, various techniques, including indirect measurement via monitoring vehicles, often yield data with significant randomness and insufficient frequency separation. Conversely, the desired attributes under scrutiny are periodic in nature. Thus, methodologies designed to identify cyclo-stationary properties within noisy data can be adapted for such scenarios, assuming an adequate length of the recorded data.
Klíčová slova:
data analysis; cyclo-stationary processes; structural health monitoring
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Adaptation of methods for cyclo-stationary processes for noisy structural health data
In structural health analysis, various techniques, including indirect measurement via monitoring vehicles, often yield data with significant randomness and insufficient frequency separation. ...
Consistency of mathematical and experimental model of the autoparametric system
Fischer, Cyril; Náprstek, Jiří
2023 - anglický
This paper presents a long-overdue comparison of data obtained from experimental investigation of a spherical vibration absorber with the results of two mathematical models of the motion of a heavy sphere in a spherical surface. It shows that the danger posed by the potentially unstable self-parametric nature of the mathematical system is not too great in the case of realistic configurations, and that the values of the parameters describing the realistic structures remain within intervals corresponding to the stable behaviour of the absorber.
Klíčová slova:
vibration absorber; rolling sphere; spherical surface; autoparametric system; structural health monitoring
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Consistency of mathematical and experimental model of the autoparametric system
This paper presents a long-overdue comparison of data obtained from experimental investigation of a spherical vibration absorber with the results of two mathematical models of the motion of a heavy ...
Ceramic protection of anti-corrosion layers of 3-glycidyloxypropyl-triethoxysilane on steel
Pokorný, P.; Prodanović, N.; Janata, Marek; Brožek, Vlastimil
2023 - anglický
There are various variations on the problem of steel reinforcement bond strength in concrete. Along with geometrical considerations, corrosion performance of steels with varying chemical compositions in interaction with variable chemical compositions of concrete are crucial. One approach is to cover steel surfaces with organosilane compounds, which increases the reinforcement resistance to corrosion in both acidic and alkaline conditions but, on the other hand, may weaken the reinforcement bond strength on concrete. The issue is resolved by intentionally forming a thin-walled, highly adhering corundum layer that is highly porous and impregnated with 3-glycidyloxypropyltriethoxysilane. This procedure also includes testing the adhesion properties between the ceramic and the metal and the cement prior to conducting a corrosion test in a chloride environment.
Klíčová slova:
steel; concrete; ceramics
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Ceramic protection of anti-corrosion layers of 3-glycidyloxypropyl-triethoxysilane on steel
There are various variations on the problem of steel reinforcement bond strength in concrete. Along with geometrical considerations, corrosion performance of steels with varying chemical compositions ...
Measurements on KR-D-11B Optimized Subsonic Blade Cascade
Šimurda, David; Hála, Jindřich
2023 - anglický
This report contains results and evaluation of aerodynamic measurements conducted on a subsonic compressor blade cascade.
Klíčová slova:
compressor blade cascade; experiment; subsonic flow; optimized profile
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Measurements on KR-D-11B Optimized Subsonic Blade Cascade
This report contains results and evaluation of aerodynamic measurements conducted on a subsonic compressor blade cascade.
2TDK Railway, profile P18. Datings. Final Report.
Bosák, Pavel; Zupan Hajna, N.; Hercman, H.; Horáček, I.; Kdýr, Šimon; Kogovšek, B.
2023 - anglický
Samples for datings were taken in the railway construction (2TDK) near village of Divača, Classical Karst on October 12, 2021: (1) vertebrate bones in cave 2TDK – 002 at the profile P18, cave entrance appeared during the construction operations on cleaned karst surface in a wall of karst depression. Samples of mammal bones and gastropods were collected in situ on cave bottom, and (2) pieces of speleothems occurring in non in situ position on artificially planated surface near the cave opening were collected. U-series: no numerical date was obtained as geochemistry of sample indicate open system, probably due to recrystallization of sample in soil cover. Paleomagnetism: The transition of N- and R-polarized samples cannot be identified more precisely as U-series radiometric dating yielded no numerical results. The transition easily can represent Brunhes/Matuyama boundary (at 773 ka) as well as any of older such transitions (e. g., base of Jaramillo, base of Olduvai). In any case the speleothem grew in a closed cave space with roof, probably as flowstone (inclusion of red soils above the base) and later as baldachin on eroded allogenic fill of the paleocave. Vertebrate paleontology: bone remains of small and larger vertebrates represent subrecent to Holocene species. Sorex alpinus represents the species quite rare in fossil record, but recetly limited to variegated woodland habitats with high surface humidity. A chamois Rupicapra rupicapra represents a resident species present in Slovenia throughout all stages of a glacial cycle, recently restricted to mountain habitats.
Klíčová slova:
Divača Karst; unroofed cave; speleothem; U-Th dating; paleomagnetism; zoopaleontology
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
2TDK Railway, profile P18. Datings. Final Report.
Samples for datings were taken in the railway construction (2TDK) near village of Divača, Classical Karst on October 12, 2021: (1) vertebrate bones in cave 2TDK – 002 at the profile P18, cave entrance ...
Room temperature ethanol detection using carbon materials
Kočí, Michal
2023 - anglický
Allotropic forms of carbon, in particular graphene oxide (GO) or nanocrystalline diamond (NCD), attracted the attention of many research groups due to their unique electronic structures and extraordinary physical and chemical properties, preferable for many different applications, including sensor devices. This work focuses on responses of various sensing layers (NCD with hydrogen termination (H-NCD), graphene oxide (GO), reduced graphene oxide (rGO), thiol-functionalized graphene oxide (GO-SH) and their hybrid structures to ethanol vapor with concentrations up to 100 ppm in synthetic air at room temperature. The measured parameters of the tested sensors, especially stability, reproducibility and regeneration, are compared and critically evaluated. The high sensitivity of tested sensors achieved at room temperature makes them very promising for monitoring ethanol vapor as well as other volatile substances (e.g., isopropyl-alcohol or acetone).
Klíčová slova:
gas sensor; nanocrystalline diamond (NCD); graphene oxide (GO); reduced graphene oxide (rGO); thiol-functionalized graphene oxide (GO-SH)
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Room temperature ethanol detection using carbon materials
Allotropic forms of carbon, in particular graphene oxide (GO) or nanocrystalline diamond (NCD), attracted the attention of many research groups due to their unique electronic structures and ...
Mechanical properties of basalt: a study on compressive loading at different strain rates using SHPB
Falta, J.; Krčmářová, N.; Fíla, T.; Vavro, Martin; Vavro, Leona
2023 - anglický
This article focuses on the mechanical properties of basalt in compressive loading at different strain-rates. The study employs advanced instrumentation for the evaluation of the results in dynamic conditions, while standard uni-axial loading device is used for evaluation in quasi-static conditions. Basalt specimens were subjected to four different loading-rates from 200–600 s−1 on which the stress-strain dependence was evaluated together with DIC analysis of crack initiation and disintegration process. Understanding the mechanical properties of basalt can provide insights for engineers and designers in creating structures that are durable and able to withstand different loading conditions. The findings of this study can have implications for a wide range of industries, including aerospace, automotive, and construction, among others.
Klíčová slova:
SHPB; basalt; compressive loading; dynamic loading
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Mechanical properties of basalt: a study on compressive loading at different strain rates using SHPB
This article focuses on the mechanical properties of basalt in compressive loading at different strain-rates. The study employs advanced instrumentation for the evaluation of the results in dynamic ...
Asynchronous time integration while achieving zero interface energy
Dvořák, Radim; Kolman, Radek; Falta, J.; Neühauserová, M.
2023 - anglický
This contribution deals with an asynchronous direct time integration of the finite-element model. The proposed method is applied to the phenomenon of wave propagation through an elastic linear continuum. The numerical model is partitioned into individual subdomains using the domain decomposition method by means of localized Lagrange multipliers. For each subdomain, different time discretizations are used. No restrictions for relation between subdomain’s time steps are imposed. The coupling of the subdomains is forced by an acceleration continuity condition. Additionally, we use the a posteriori technique to also provide the displacement and velocity continuity at the interfaces, and hence we obtain exact continuity of all three kinematic fields. The proposed method is experimentally validated using the modified SHPB (split Hopkinson pressure bar) setup.
Klíčová slova:
finite element method; direct time integration; asynchronous integration; domain decomposition; localized lagrange multipliers
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Asynchronous time integration while achieving zero interface energy
This contribution deals with an asynchronous direct time integration of the finite-element model. The proposed method is applied to the phenomenon of wave propagation through an elastic linear ...
Comparison of finite element simulation of tungsten nanoindentation with Berkovich and conical indenter
Fiala, L.; Ballo, I.; Kovář, J.; Fuis, Vladimír
2023 - anglický
Finite Element Method (FEM) was used to study the difference between using Berkovich and conical indenters in nanoindentation test of tungsten specimen. The study was aimed to determine the\nmodulus of elasticity of a tested specimen and how it changes with different indenter. The FEM analysis also revealed that the modulus of elasticity was sensitive to the dimensions of both specimen and the indenter for which were made several numerical calculations with different dimensions.
Klíčová slova:
nanoindentation; FEM; Berkovich indenter; conical indenter; tungsten
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Comparison of finite element simulation of tungsten nanoindentation with Berkovich and conical indenter
Finite Element Method (FEM) was used to study the difference between using Berkovich and conical indenters in nanoindentation test of tungsten specimen. The study was aimed to determine the\nmodulus ...
Optical and Pneumatic Measurements on TR-U-11 Cascade
Luxa, Martin; Hála, Jindřich; Šimurda, David
2023 - anglický
The report contains results and evaluation of conducted optical (interferometry and schlieren technique) and pneumatic measurements on the first variant of the new tip section, intended for turbine rotor blade.
Klíčová slova:
transonic flow; rotor turbine blade; tip section
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Optical and Pneumatic Measurements on TR-U-11 Cascade
The report contains results and evaluation of conducted optical (interferometry and schlieren technique) and pneumatic measurements on the first variant of the new tip section, intended for turbine ...
NUŠL poskytuje centrální přístup k informacím o šedé literatuře vznikající v ČR v oblastech vědy, výzkumu a vzdělávání. Více informací o šedé literatuře a NUŠL najdete na webu služby.
Vaše náměty a připomínky posílejte na email nusl@techlib.cz
Provozovatel
Zahraniční báze